Multicast to Host but not to Guest
Hi all
I have a strange situation. To give you some background, I have recently built 2 Hyper V3 2 node server 2012 clusters in a failover environment; all has been working without issue. The kit moves from location to location, so is frequently turned on and shutdown.
The other day upon bringing the server up, it was noted that the servers on cluster2 could not receive or stream mulitcast traffic, whilst those on cluster1 were fine. Initial thoughts were to it being a single guest machine problem, but upon rebooting the
guest this made no difference. All guests were moved off of one node, rebooted the node and then shifted back, again to no avail. Wireshark was used to see whether the guests were receiving multicast traffic, and no they weren’t. Wireshark was also installed
on the hosts, and it was being received to there.
The guest in question was failed over to cluster1 and then worked without issues. The kit is currently in transit so I’m unable to test anything but has anyone seen anything similar to this before. As I have said, this situation was not present the last
time the clusters were turned on, only this time.
A little bit of background that may help: the hosts are HP385 G8 servers, and 3 ports from each HP server is connected to a cisco 3850 via LACP. The fourth port on the server is connected to each other as the heartbeat connection.
Many thanks
Hi Chris,
Are you trying to enable NLB (Network Load Balancing) in Multicast mode or are you really trying to achieve something else?
The fact is, Multicast issues can be caused by a lot of things. I don't want to go into to much detail. But to give me a bit more information. Are you using Multicast or IGMP Multicast? Are you trying to reach your guests from a source located behind
a router? Have tried accessing the guests from the local subnet? Any diffrence? You are aware that you have to configure your netwerk devices (e.g. Cisco Catalyst switches) for multicast traffic right?
Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".
Similar Messages
-
Screen Sharing works for alien hosts but not for LAN hosts
Hello!
I am having a really strange problem in a customer network. The network is a local private network with one MacOS Server 10.6.8 and around 12 iMacs running MacOS 10.6.8. The server is running headless in cellar so the user maintain the backup via screen sharing from an iMac to the server.
Since a few weeks they can not login to the server via screen sharing from any local host BUT I can login from my MBP (alien) via ARD or Screen Sharing without any problem. Even hosts connected to the network via VPN can connect to the server via screen sharing.
In short:
Every local host gets a message that login is not possible and my MBP and VPN-hosts get connected without any problems with the same credentials.
At the local clients I get this message in system.log:
Oct 28 09:33:41 verwaltung1 LKDCHelper[228]: Starting (uid=501)
Oct 28 09:33:48 verwaltung1 com.apple.launchd.peruser.501[166] (com.apple.Kerberos.renew.plist): Throttling respawn: Will start in 530 seconds
Oct 28 09:34:17 verwaltung1 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[195]: CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
and at the server I get:
Oct 28 09:33:48 solserv AppleVNCServer[11503]: no such user: adminloc@LKDC:SHA1.DE03ABCC86F74D11AD139E44388D6B94155B4D9E: 2
When I connect from VPN or my MBP I get no messages in system.log.
I tried to kickstart ARD at the server but it does not change anything, I bound the clients to OpenDir of the server with no effect also.
I do not have any idea what is happening here. Every help is welcome,
ChristopHello MrHoffmann!
changeip says "The names match. There is nothing to change."
To give more infos, the server and all the clients are connected to the same network switch, all belong to 192.168.183/24 and when I use my MBP, it is connected via WLAN and gets an IP-address from this server with an IP from this range. my MBP is in the same broadcast domain.
VPN clients connect via PPTP to the gateway (192.168.183.1) and get IP addresses assigned from 192.168.183.48-52.
There is no routing between the clients and the server.
There is no other problem - every client reaches the server for file serivces (AFP/SMB), smtp, imap, DHCP and DNS.
BTW. screen sharing from the clients worked without a problem when I first setup the network about 1 year ago, but since a few weeks no client that belongs to this network can use screen sharing except for my MBP when I am at customer site.
History:
The new SLS is a replacement for an old Windows 2000 Server. Both servers ran in parallel for some time but within different IP-networks (all Macs at 192.168.183/24 - all Windows at 192.168.2/24) the gateway routed between both networks. But now it is time to switch off every windows computer because every service now runs at the SLS. AFAIK the windows 2000 Server is the last Windows machine in the network. We switched off DHCP at the windows server and switched on DHCP at the SLS a few weeks ago. Hm .... maybe there is something wrong? But the clients have fixed ip-addresses.
Still wondering what is going on here, bye,
Christoph -
Browser background uploaded to my mac host but not my real website :( help!
Hello,
Thanks in advance for your help. Go easy on me, I'm not too technically savvy. So, a picture is worth a thousand words. I can't for the life of me understand why the browser background doesn't show up on my regular website. the other things that are missing are the little iweb elements. so weird. and lame.
this is how it appears: http://www.hennalounge.com/Home.html
this is how it should appear: http://web.mac.com/darcitananda/iWeb/HennaLounge/Home.htmlI can't for the life of me understand why the browser background doesn't show up on my regular website.
For starters, make sure you have uploaded everything. Your url indicates that you failed to upload the folder called HennaLounge (plus the index.html file that iWeb creates alongside it). If you did that, you may well have forgotten other things as well. Make sure you use a real ftp program like Cyberduck and not some uploader provided by your host. When your site is fully uploaded, your url will look like this:
http://www.hennalounge.com/HennaLounge/Home.html
If you don't like the duplication, change your site name inside iWeb to "hl" or whatever and republish and reupload. -
FLV Will Work on Local Host But Not on Web
Hello,
I'm having trouble embedding a progressive download FLV into
my html page using Dreamweaver 8. The code appears correct but
there is nothing where the video should appear.
This tested fine locally. Everything loaded fine. But when I
published everything via FTP there the space where the FLV should
be is blank.
The page I am working with is :
http://drewbuchanan.com/start.html
The FLV file is located here:
http://drewbuchanan.com/Promo.flv
The FLV Progressive SWF is located here:
http://drewbuchanan.com/FLVPlayer_Progressive.swf
And the skin files are located here:
http://drewbuchanan.com/Corona_Skin_2.swf
Here is the .FLA file also:
http://drewbuchanan.com/VisualsPromo.fla
I have posted the code of just the Flash Video as it is in my
site below.
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0','widt h','700','height','420','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_Co mponentVersion=1&skinName=Corona_Skin_2&streamName=Promo&autoPlay=true&autoRewind=false',' quality','high','scale','noscale','name','FLVPlayer','salign','lt','pluginspage','http://w ww.macromedia.com/go/getflashplayer','movie','FLVPlayer_Progressive'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="700" height="420" id="FLVPlayer">
<param name="movie" value="FLVPlayer_Progressive.swf"
/>
<param name="salign" value="lt" />
<param name="quality" value="high" />
<param name="scale" value="noscale" />
<param name="FlashVars"
value="&MM_ComponentVersion=1&skinName=Corona_Skin_2&streamName=Promo&autoPlay=true&autoR ewind=false"
/>
<embed src="FLVPlayer_Progressive.swf"
flashvars="&MM_ComponentVersion=1&skinName=Corona_Skin_2&streamName=Promo&autoPlay=true&a utoRewind=false"
quality="high" scale="noscale" width="700" height="420"
name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object></noscript>
Can anyone help me out and tell me why this isn't working
properly? Is it a server problem, user error?
Thanks!Especially me!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"TC2112" <[email protected]> wrote in message
news:[email protected]...
>> You might want to set the video to Paused at start.
Some people may
>> not appreciate your music blaring out of their
speakers during
>> office hours :)
>
> ..or if their 2 year old is sleeping in the next room.
>
> For what it's worth, some people will click away from a
site within a few
> seconds of music automatically playing.
>
> Take care,
> Tim
>
>
> "Mark A. Boyd" <[email protected]>
wrote in message
>
news:[email protected]...
>> gatrfan posted in macromedia.dreamweaver
>>
>>> Hello,
>>>
>>> I'm having trouble embedding a progressive
download FLV into my
>>> html page
>>> using Dreamweaver 8. The code appears correct
but there is nothing
>>> where the video should appear.
>>> This tested fine locally. Everything loaded
fine. But when I
>>> published
>>> everything via FTP there the space where the FLV
should be is
>>> blank.
>>>
>>>
>>> The page I am working with is :
>>>
http://drewbuchanan.com/start.html
>>
>> The page works fine with JavaScript disabled. With
JS enabled, no
>> video. With LiveHTTP headers, I see that you
apparently forgot to
>> upload the Scripts folder and its contents,
AC_RunActiveContent.js
>> which contains the AC_FL_RunContent() function.
>>
>>
>>
http://drewbuchanan.com/Scripts/AC_RunActiveContent.js
>> GET /Scripts/AC_RunActiveContent.js HTTP/1.1
>> HTTP/1.x 404 Not Found
>>
>>
>> Once you upload that folder and
AC_RunActiveContent.js, JavaScript
>> enabled browsers should show the video.
>>
>> [Side note]
>> You might want to set the video to Paused at start.
Some people may
>> not appreciate your music blaring out of their
speakers during
>> office hours :)
>>
>>
>> --
>> Mark "404" Boyd
>> Keep-On-Learnin' :)
>
> -
CSS works on local host but not when ftp to server
I am completely stumped. I have a site I built on a development platform in XAMPP. The jQuery lightbox css styling works great. I FTP the files to the server and the css styles are no longer being applied. I hope someone can help me. The link to the stylesheet works. No changes in code. I just can figure it out. Same issue all browsers. Thanks
The url sample page is here:
_css/colorbox.css
http://192.185.137.91/~gothicarch/acrylic-panels.htm
Local Host
SeverNevermind. I had mistakenly deleted a directory on the server that was kind of important: Thankfully I had a backup:)
-
Application on Win7 64bit throws error -50103, but not on Win XP 32bit host
LabVIEW application newly installed on Win7 64bit host throws error -50103.
Same aplication deployed from same installation disk on Win XP 32bit host have been working for 2 years withourt problem.
I did have a problem with importing the MAX configuration from the Win XP 32bit machine to the Win 7 64bit machine.
My solution was to install all the drivers from my most recent Devaloper Suite 2012 DVD.
After that the executable did run fine, except when the variuos DAq tasks are executed for the second time in a loop it thows error -50103.
If i click ok on the erro popup, everything else works fine until in the next pass of the loop I get the same error.
Why would I get error on one host but not on the other one?
How do I fix this?
Scientia est potentia!A common error that you can find numerous posts about with a search
http://forums.ni.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3A170&q=5... -
Built app with subpanels works for me, but not for him
Using labview 8.6 I have successfully built several revisions of an app that has multiple subpanels. It has successfully executed on several different hosts. However, with the most recent version I received a report that it launches, but the sub-panels do not load. Of course, WFM (works for me) -- the sub-panels are compiled into the app and they load just fine for me. The other user is using the free 8.6 LabView runtime. Again, previous app revisions have worked fine, and I don't know what is different about this build that could affect loading of the subpanels.
On my PC I renamed the path to the source files just in case the built app was picking up some missing file directly from the original VI directory. Still works for me. I even monitored it with FileMon (sysinternals.com) and confirmed that it never tried to open any other file (which further confirms that all the sub-panels are successfully incorporated into the built application).
The only other significant difference is that the app is designed for 1280x1024 screen and the other user is running on a 1024x768 laptop. But how could that affect loading the sub-VIs?
Does anyone have any idea what would cause a built application with subpanels to work fine on one host but not display the sub-panels on another host?
Thanks and Best Regards,
J.How are you getting the software on the other computer? Did you build an installer?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Hi, I have installed vmware 5.5 hypervisor on hp G8 microserver. I have created one vm as windows 2008 R2. I have also install vmware workstation 11 on this vm. In this workstation when I tried to run vmware 5.5 hypervisor I come across "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x" this statement. Which shows that the host machine does not support virtualization and for that you need to go in Bios and enable it but in present case as host machine is also a vm and you would not find much detail of Bios when you log into the Bios therefore, I am pretty much stuck here. I don't see any information in relation to this. Now my question is:
1. Can we run ESXi inside a vm which is already sitting on ESXi?I moved the discussion from VMware Workstation to Nested Virtualization which contains several hints on what's possible and what needs to be configured to make things work.
André -
Why does GarageBand audio work for guest user but not my account?
Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account? Then we will need to troubleshoot your preferences."
I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
Remove these files from your User Library to a folder on your Desktop:
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder".
Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside: ~/Library/Containers/com.apple.garageband10/,
~/Library/Caches/garageband . -
Some programs crash but not in safe mode or for guest user
Hoping that some talented and kind Mac wizard will help me solve a bizarre problem: Some but not all of my programs have started crashing immediately upon launch, but not in safe mode, nor when I log in as a guest user.
The problem began on February 5th, right after I installed an update to my OS (bringing it up to version 10.7.3), which included an update to the firmware for my computer, a Mac mini from mid-2010. The programs that began crashing upon launch *may* be those that were open at that time, but I can’t be sure. They include Adobe Reader, Picasa, Word for Mac, and a sweet little utility called uCalendarX.
Specifically what happens with, say, uCalendarX, is this: After I launch it, nothing appears on screen for a few seconds, and then comes a message that it is trying restore its windows, with a choice of whether to attempt restoring them or not. After a few more seconds comes the news that it has quit unexpectedly. The first several dozen lines of the crash log appear at the end of this posting.
So far my troubleshooting has revealed the following:
(a) When I reboot in safe mode, the programs that crash now work normally.
(b) When I boot the usual way but log on a guest user, the programs that crash now work normally.
(c) Fully emptying the trash made no difference.
(d) The problem was not solved by restoring my hard drive (via Time Machine) to its state the day before I downloaded that update to the OS and the firmware. (This was a drastic step, the intervention of last resort, and I was sure it would work. But no. Perhaps I did not go back far enough for the restoration.)
(e) Deleting the plist files and plist.lockfiles made no difference.
(f) Deleting the files for the app under Saved Application States made no difference.
(g) Disabing the user’s font cache (as happens in safe mode) made no difference.
(h) Uninstalling Adobe Reader, emptying the trash, downloading the latest version, and installing that made no difference – this latest version newly installed continues to crash (but not for a guest user, nor for me, the administrator, in safe mode).
(i ) Repairing permissions on the hard drive made no difference.
I will be mighty grateful for a solution to this perplexing, vexing problem!
B.t.w., I don’t know Unix but was able to do all those (fruitless) interventions listed above.
Gordon Bear
Ramsey NJ U S A
The log from one of the many crashes of uCalendarX begins as follows:
Process: uCalendarX [750]
Path: /Applications/uCalendarX 3.2.3/uCalendarX 3-2-3.app/Contents/MacOS/uCalendarX
Identifier: com.riuz.ucalendarx
Version: 3.2.3 (3.2.3)
Code Type: X86 (Native)
Parent Process: launchd [289]
Date/Time: 2012-02-20 00:38:48.931 -0500
OS Version: Mac OS X 10.7.3 (11D50b)
Report Version: 9
Interval Since Last Report: 2463 sec
Crashes Since Last Report: 3
Per-App Interval Since Last Report: 30 sec
Per-App Crashes Since Last Report: 3
Anonymous UUID: 0CA8DA26-8927-4AC3-B35F-3B2E9FD65A8E
Crashed Thread: 4
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000008bcc45ab
External Modification Warnings:
Thread creation by external task.
VM Regions Near 0x8bcc45ab:
CoreServices 0000000004fd0000-00000000051ee000 [ 2168K] rw-/rwx SM=COW
-->
__TEXT 000000008fe52000-000000008fe85000 [ 204K] r-x/rwx SM=COW /usr/lib/dyld
Application Specific Information:
objc[750]: garbage collection is OFF
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x920136e6 __open + 10
1 libFontParser.dylib 0x9cc5b403 TFileDescriptorContext::TFileDescriptorContext(char const*) + 77
2 libFontParser.dylib 0x9cc5b1c5 TFileDataReference::TFileDataReference(char const*) + 65
3 libFontParser.dylib 0x9cc5b056 TFileDataSurrogate::TFileDataSurrogate(char const*, bool) + 136
4 libFontParser.dylib 0x9cc59af3 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 2581
5 libFontParser.dylib 0x9cc58a7a FPFontCreateFontsWithPath + 193
6 libCGXType.A.dylib 0x950164b0 create_private_data_with_path + 26
7 com.apple.CoreGraphics 0x95349ecf CGFontCreateFontsWithPath + 33
8 com.apple.CoreGraphics 0x95349b09 CGFontCreateFontsWithURL + 442
9 com.apple.CoreText 0x90e1c1aa TCGFont::TCGFont(__CFURL const*, bool) + 90
10 com.apple.CoreText 0x90e1bfb2 TCGFontCache::CopyFont(__CFURL const*) const + 92
11 com.apple.CoreText 0x90e1be6c TBaseFont::CopyNativeFont() const + 50
12 com.apple.CoreText 0x90e1bd6f TTableStore::CopyTable(unsigned int, TCFRetained<__CFData const*>&) + 81
13 com.apple.CoreText 0x90e1bade TBaseFont::CopyTable(unsigned int) const + 72
14 com.apple.CoreText 0x90e1ba0f TcmapTable::TcmapTable(TBaseFont const&) + 31
15 com.apple.CoreText 0x90e1b8fd TBaseFont::GetGlyphsForCharacterRange(CFRange, unsigned short*) const + 27
16 com.apple.CoreText 0x90e1b79b TASCIIDataCache::TASCIIDataCache(TBaseFont const*) + 83
17 com.apple.CoreText 0x90e1b70f TBaseFont::CreateASCIIDataCache() const + 47
18 com.apple.CoreText 0x90e1b690 TFont::InitAdvanceCache() const + 42
19 com.apple.CoreText 0x90e1b4ad TASCIIEncoder::Encode() + 45
20 com.apple.CoreText 0x90e4433f TGlyphEncoder::EncodeChars(CFRange, TAttributes const&, TGlyphList<TDeletedGlyphIndex>&, TGlyphEncoder::Fallbacks) + 925
21 com.apple.CoreText 0x90e19ff6 TTypesetterAttrString::Initialize(__CFAttributedString const*) + 322
22 com.apple.CoreText 0x90e19b9d CTLineCreateWithAttributedString + 47
23 com.apple.HIToolbox 0x963d2b2d TCoreTextEngine::LayoutSingleLine(THIThemeTextInfo*, float) + 23
24 com.apple.HIToolbox 0x963d2a9a TCoreTextEngine::Layout(THIThemeTextInfo*, float, float, TextLayoutType) + 64
25 com.apple.HIToolbox 0x963ad2c9 TCoreTextEngine::VerifyLayout(THIThemeTextInfo*, float, float, LayoutIntent) + 309
26 com.apple.HIToolbox 0x96410b0a TCoreTextEngine::GetThemeTextDimensions(float, THIThemeTextInfo*, float*, float*, float*) + 54
27 com.apple.HIToolbox 0x9640fc51 DataEngine::GetTextDimensions(void const*, float, HIThemeTextInfo*, float*, float*, float*) + 283
28 com.apple.HIToolbox 0x963d1fc5 HIThemeGetTextDimensions + 187
29 com.apple.HIToolbox 0x963d1ca3 HIMenuBarView::MeasureMenuTitle(MenuData*, unsigned char, float*, int, unsigned char*) + 451
30 com.apple.HIToolbox 0x963d1a49 HIMenuBarView::MeasureAppMenus() + 261
31 com.apple.HIToolbox 0x963abb5d HIMenuBarView::EnsureBarLayout() + 489
32 com.apple.HIToolbox 0x963ab152 HIMenuBarView::DrawSelf(short, __HIShape const*, CGContext*) + 520
33 com.apple.HIToolbox 0x963aac22 HIView::DrawCacheOrSelf(short, __HIShape const*, CGContext*) + 86
34 com.apple.HIToolbox 0x963aaa42 HIView::SendDraw(short, OpaqueGrafPtr*, __HIShape const*, CGContext*) + 124
35 com.apple.HIToolbox 0x964395c7 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 755
36 com.apple.HIToolbox 0x964398b9 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 1509
37 com.apple.HIToolbox 0x9643a86b HIView::DrawComposited(short, OpaqueGrafPtr*, __HIShape const*, unsigned long, HIView*, CGContext*) + 1227
38 com.apple.HIToolbox 0x9643a9b3 HIView::Draw(short, OpaqueGrafPtr*, unsigned long) + 81
39 com.apple.HIToolbox 0x9643ad7b HIView::Render(unsigned long, CGContext*) + 45
40 com.apple.HIToolbox 0x963d084f WindowData::PrepareForVisibility() + 137
41 com.apple.HIToolbox 0x963cf893 _ShowHideWindows + 355
42 com.apple.HIToolbox 0x963cf728 ShowHide + 44
43 com.apple.HIToolbox 0x96399b09 _GetMenuBarWindow + 872
44 com.apple.HIToolbox 0x96399765 GetMenuBarView(MenuData*, unsigned char) + 74
45 com.apple.HIToolbox 0x963a2f3a MBarMenuRgn + 26
46 com.apple.HIToolbox 0x963a2d27 _ZL7ShowBar21MenuBarAnimationStylehhh + 281
47 com.apple.HIToolbox 0x963cd42a _ZL21UpdateAggregateUIMode21MenuBarAnimationStylehh + 772
48 com.apple.HIToolbox 0x963e38e5 ShowMenuBar + 163
49 com.apple.AppKit 0x001a9cad -[NSApplication finishLaunching] + 1331
50 com.apple.AppKit 0x001a9374 -[NSApplication run] + 142
51 com.apple.AppKit 0x0043d261 NSApplicationMain + 1054
52 com.riuz.ucalendarx 0x00001eea _start + 216
53 com.riuz.ucalendarx 0x00001e11 start + 4Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
So the mystery continues, but these additional facts will help with the diagnosis, I hope.
Thanks again for your suggestion.
Gordon -
Why does Mail open in guest account but not my account since upgrade to Mavericks?
I've read a lot of threads but not found anything that works for me. The history is this:
I've upgraded to Mavericks 10.9.2. Since then, Mail won't open in my own user account. I only get a very brief error message:
Process:
Mail [1448]
Path:
/Applications/Mail.app/Contents/MacOS/Mail
Identifier:
com.apple.mail
Version:
7.2 (1874)
Build Info:
Mail-1874000000000000~1
Code Type:
X86-64 (Native)
Parent Process: launchd [157]
Responsible:
Mail [1448]
User ID:
I have gone to user/Library/Mail and deleted the contents of the folder Mailboxes + all the other mailboxes. No change - Mail still won't open.
If I switch user accounts to guest user, Mail opens normally (sets up email accounts etc).
Any advice would be much appreciated.Rebooted in safe mode, repaired disc permissions, rebooted (again in safe mode) but no difference.
There was a bit more detail I could / should have added.
1) Before it crashes, Mail says it is Upgrading your Mail database.
2) I downloaded Mail update but Installer said none of the drives were compatible. (Anyway Mail works fine in Guest Account)
3) I've been through all the tips on this post https://discussions.apple.com/message/23490745#23490745http://
and
looked at Internet accounts in Preferences and none of my email accounts is checked with Mail. It asks for a password for each one but when I provide it I get the message Unable to verify account name or password. And if I try and uncheck iCloud with Mail I get the message that I need to do that from within Mail. (Obviously not possible until I can open Mail).
In Terminal tried defaults delete com.apple.mail ColorQuoterColorList but got the message that it hadn't been done.
Tried to find Envelope.x.x files as per this fix: Final solution: Go into ~Library/Mail/V2/Mailboxes > Delete all mailboxes. Then go to ~Library/Mail/V2/Maildata and delete 3 or more "Envelope.x.x" files > Restart Mail, and enjoy your success. but don't have a V2 folder nor Envelope.x.x files. I do have Envelope Index file and Envelope Index - journal
I don't suspect 3rd party applications because I think they are all available in the Guest Account aren't they?
Many thanks for your reply though. Any more ideas? -
NAT issue - (over same link) static-NAT works but PAT (for rest of hosts) does not !
Hello fellow engineers!
I have a puzzling situation implementing an Internet routing pilot project and I need someone with a fresh look at the matter because I cannot make-out what the problem is…
Scenario description:
2901 router with two (one used) DSL intf’s on board and its two GE ports connected to a switch via Port-Channel sub-int’f (router-on-a-stick is implemented). The router has two other WAN (Internet) connections via a Satelite link and a MetroEthernet link. These two are terminated on the switch on intf’s at the appropriate VLAN’s. At attached topology scheme I depict them all collocated on the router for “simplicity” (logical topology) since the router has intf’s at the corresponding networks. The aDSL and Metro links have an 8-IP public set, each.
Most servers/hosts utilize VLAN 10 (int port-channel 1.10) but they need to forward their internet traffic to corresponding Internet links so PBR is used. VLAN/subnet (all /24) pairs are:
VLAN 11 -> 10.0.1.x
VLAN 12 -> 10.0.2.x
VLAN 13 -> 10.0.3.x
VLAN 71 -> 192.168.17.x
VLAN 204 -> 172.16.204.x
and – last but not least ! – VLAN 10 -> 10.0.0.x
All servers use static 1-1 NAT while all other hosts/PC’s use the Metro link (PAT).
Situation: All PBR rules and static NAT’s of VLAN 10 behave as expected. So does the PAT for hosts of all other VLAN’s (11, 12, 13, …). The rest of the hosts of VLAN 10, i.e. PC’s with IP’s 10.0.0.x (in red), cannot get to the Internet !
What is puzzling is that traffic is matched (by ACL) and NAT does occur but all I see (via “sh ip nat tra”) are the translations of the DNS requests ! Nothing else ! To top that, tracerouting a public IP does lead to the target but when hitting that same public IP (not by name) on the browser can’t load the page !
Could pls someone spot what I’m missing !!
To help you I also attach the router config and some command outputs…
All help is appreciated.
Thanx
CostasThat last PBR statement
(route-map 10.0.0.X_hosts_PBR permit 70
description *** rest of 10.0.0.x net --> Oxygen ***
match ip address rest_of_10.0.0.x
set ip next-hop 212.251.64.153)
was not there in the first place - I got it there assuming it would help but it didn't. Actually - as mentioned - it does not get any hits !
(route-map 10.0.0.X_hosts_PBR, permit, sequence 255
Match clauses:
ip address (access-lists): rest_of_10.0.0.x
Set clauses:
ip next-hop 212.251.64.153
Policy routing matches: 0 packets, 0 bytes) -
SFTP/FTP Proxy Problems - Works for DMZ but not for Internet Hosts?!
Hi together,
we have a strange problem with our TMG Proxy, some infrastructure informations first
So we have the Client LAN with the IP range 192.168.11.x which is routeable to Server LAN 192.168.3.x but not to DMZ LAN 192.168.200.x.. The TMG is a 2 Node Array, 192.168.200.5 is the DMZ VIP. TMG DMZ IP Adress (192.168.200.5) and physical Adresses have
an NAT relation to one Public IP. HTTPS Inspection is active. We dont use (and dont want to) the TMG Client component.
When i use WinSCP, Putty or Filezilla and connect to a DMZ LAN Host (192.168.200.x) with "HTTP Proxy" (192.168.3.108:8080) everything is fine, it works like expected...
When i connect to an Internet Host it fails regardless which protocol i use - ftp, sftp or ssh. The error i get is
"The token supplied to the function is invalid."
An example for a failed SFTP Connection
Filezilla
Status: Connecting to system.internet.de...
Trace: Going to execute "C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe"
Response: fzSftp started
Trace: CSftpControlSocket::ConnectParseResponse(fzSftp started)
Trace: CSftpControlSocket::SendNextCommand()
Trace: CSftpControlSocket::ConnectSend()
Command: proxy 1 "tmg.local" 8080 "domain\user" "***********"
Trace: CSftpControlSocket::ConnectParseResponse()
Trace: CSftpControlSocket::SendNextCommand()
Trace: CSftpControlSocket::ConnectSend()
Command: open "[email protected]" 22
Trace: Looking up host "system.internet.de"
Trace: Connecting to 192.168.3.108 port 8080
Trace: Proxy error: 502 Proxy Error ( Das Token, das der Funktion übergeben wurde, ist ungültig. )
Error: Proxy error: 502 Proxy Error ( Das Token, das der Funktion übergeben wurde, ist ungültig. )
Trace: CControlSocket::DoClose(64)
Trace: CSftpControlSocket::ResetOperation(66)
Trace: CControlSocket::ResetOperation(66)
Error: Could not connect to server
Trace: CFileZillaEnginePrivate::ResetOperation(66)
TMG protocol throws this
Protokolltyp: Webproxy (Forward)
Status: 0x80090308
Regel: Webzugriff FTP Test
Quelle: Intern (192.168.11.31:44673)
Ziel: Extern (78.46.182.171:22)
Anforderung: system.internet.de:22
Filterinformationen: Req ID: 106f1cb7; Compression: client=No, server=No, compress rate=0% decompress rate=0%
Protokoll: https-inspect
Benutzer: domain\user
Hope you can explain me what we doin wrong or how to find out whats the problem. I didn`t find many informations about "0x80090308" or "The token supplied to the function is invalid.". Disabling HTTPS Inspection for the Source 192.168.11.31
doesnt change anything...
Connection to an DMZ Host looks like this:
Filezilla
Status: Connecting to system.dmz...
Trace: Going to execute "C:\Program Files (x86)\FileZilla FTP Client\fzsftp.exe"
Response: fzSftp started
Trace: CSftpControlSocket::ConnectParseResponse(fzSftp started)
Trace: CSftpControlSocket::SendNextCommand()
Trace: CSftpControlSocket::ConnectSend()
Command: proxy 1 "tmg.local" 8080 "domain\user" "***********"
Trace: CSftpControlSocket::ConnectParseResponse()
Trace: CSftpControlSocket::SendNextCommand()
Trace: CSftpControlSocket::ConnectSend()
Command: open "[email protected]" 22
Trace: Looking up host "system.dmz"
Trace: Connecting to 192.168.3.108 port 8080
Trace: Server version: SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2
Trace: Using SSH protocol version 2
Trace: We claim version: SSH-2.0-PuTTY_Local:_Mar_28_2014_10:34:48
Trace: Doing Diffie-Hellman group exchange
Trace: Doing Diffie-Hellman key exchange with hash SHA-256
Trace: Host key fingerprint is:
TMG Protocol
Protokolltyp: Webproxy (Forward)
Status: 0 Der Vorgang wurde erfolgreich beendet.
Regel: Webzugriff FTP Test
Quelle: Intern (192.168.11.31:48818)
Ziel: Umkreis 2 (192.168.200.205:22)
Anforderung: system.dmz:22
Filterinformationen: Req ID: 10727dce; Compression: client=No, server=No, compress rate=0% decompress rate=0%
Protokoll: SSL-tunnel
Benutzer: domain\user
Thanks in advance.
Regards
MatthiasHi Keith,
ok i found out the problem is https inspection is enabled....
- when i disable https inspection for source, same problem
- when i disable https inspection for destination, problem solved
the root cause why this worked is we had https inspection disabled for dmz destinations.
there is no direct route relation between the lan and dmz.
why is source exception not working in this? -
Below, you see a netcat list of my hosts. Most are answering port 5900, but not 2179. The list on the bottom is answering 2179, but not 5900. I need to know for 3 reason why this is, (1) to setup our enterprise firewall, (2) for port health
monitoring of our hosts, and (3) just what is going on. I thought that 2179 should be open on all hosts, and that 5900 was only used in legacy cases (at least from what I read from googling around). Why aren't all of my hosts answering 2179?
My hosts are all Server 2008 R2 Datacenter SP1 64-bit. We have a mix of VMs with Server 2008 R2, Win7, and RHEL6, all 64-bit.
Most answering 5900...
[lhco-mshv01] Connection to lhco-mshv01 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv02] Connection to lhco-mshv02 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv03]
[lhco-mshv05] Connection to lhco-mshv05 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv06]
[lhco-mshv07]
[lhco-mshv08] Connection to lhco-mshv08 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv09] Connection to lhco-mshv09 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv10]
[lhco-mshv11] Connection to lhco-mshv11 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv12] Connection to lhco-mshv12 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv13] Connection to lhco-mshv13 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv14] Connection to lhco-mshv14 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv16]
[lhco-mshv17]
[lhco-mshv18] Connection to lhco-mshv18 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv19] Connection to lhco-mshv19 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv20]
[lhco-mshv21]
[lhco-mshv22] Connection to lhco-mshv22 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv23] Connection to lhco-mshv23 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv24] Connection to lhco-mshv24 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv25] Connection to lhco-mshv25 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv26] Connection to lhco-mshv26 5900 port [tcp/vnc-server] succeeded!
[lhco-mshv27] Connection to lhco-mshv27 5900 port [tcp/vnc-server] succeeded!
The others are answering 2179...
[lhco-mshv01]
[lhco-mshv02]
[lhco-mshv03] Connection to lhco-mshv03 2179 port [tcp/vmrdp] succeeded!
[lhco-mshv05]
[lhco-mshv06] Connection to lhco-mshv06 2179 port [tcp/vmrdp] succeeded!
[lhco-mshv07] Connection to lhco-mshv07 2179 port [tcp/vmrdp] succeeded!
[lhco-mshv08]
[lhco-mshv09]
[lhco-mshv10] Connection to lhco-mshv10 2179 port [tcp/vmrdp] succeeded!
[lhco-mshv11]
[lhco-mshv12]
[lhco-mshv13]
[lhco-mshv14]
[lhco-mshv16] Connection to lhco-mshv16 2179 port [tcp/vmrdp] succeeded!
[lhco-mshv17] Connection to lhco-mshv17 2179 port [tcp/vmrdp] succeeded!
[lhco-mshv18]
[lhco-mshv19]
[lhco-mshv20] Connection to lhco-mshv20 2179 port [tcp/vmrdp] succeeded!
[lhco-mshv21] Connection to lhco-mshv21 2179 port [tcp/vmrdp] succeeded!
[lhco-mshv22]
[lhco-mshv23]
[lhco-mshv24]
[lhco-mshv25]
[lhco-mshv26]
[lhco-mshv27]Brian,
This is specifically related to Hyper-V hosts, where the following ports may be used by the VMM to communicate to each host:
VMConnect (RDP) to Hyper-V hosts 2179
VMRC connection to Virtual Server host 5900
These ports are outlined here...
technet.microsoft.com/en-us/library/cc764268.aspx
I am not running independent VNC servers on my hosts. They are VMRC ports. My confusion is why some of my hosts are only answering 2179, while the others are only answering 5900, but not both ports on all hosts (or for that matter just 2179 on
all hosts). -
How to use HOST call DOS continuous running problem but NOT hold Forms scre
In my Forms, I have a Button a start a MP3 recorder program to record voice, I use HOST command to init the program successfully. However, since the MP3 recorder program in continuous running, the HOST command hold my Forms screen until the MP3 program stop.
I have try to use Open_form to open another form to start this MP3 program. It still hold the whole Forms system.
Is there any solution to start a continuous running DOS program but NOT hold the Forms screen?
Thank You !You didn't provide your host-command, so i simply guess its something like
HOST('"c:\Program Files\mp3.exe" someoptions');instead of calling the program directly, you could use a commadn batch along with the start-command, for this should launch the program asynchronously:
HOST('cmd /c start "c:\Program Files\mp3.exe" someoptions');hope this helps.
Maybe you are looking for
-
Can't open documents created in Pages with macBook pro running maverick
Hello, I just bought the new MacBook Pro and downloaded iWork. Now when I create a document in Pages and save it to Documents, I can't open it. I get an error messages saying a file is missing. Also, all my old documents created with Pages that I
-
Hi everyone I wonder if anyone can offer me some advice to rectify the problems I'm experiencing in my itunes? I have been saving my media to an external hard drive since rebuilding my itunes collection, while keeping the library on the hard drive of
-
Hello - I am looking for a safe source to download Boot Camp for an Intel iMac running OS X 10.6.8. Have several Windows-based programs I need to run. Thank you kindly
-
How do I tell if I have SBS 2003 R1 or R2?
Hi All, How do I tell if I am running SBS2003 R1 or R2? This is what properties tells me: <style type="text/css">p { margin-bottom: 0.1in; line-height: 120%; }a:link { }</style> Microsoft Windows Small Business Server 2003 Service Pack 2 Product P
-
Do IOS restriction settings prevent restoring from a different backup
Can a child restore their iPad from their own backup and override restrictions set in place?