MulticastSocket class and UDP
I m working with MulticastSocket, sending a single packet over a group of computers or networks (each client)using Multicast IP-Address.
i am stuck over a point where let suppose a network comprises of 4 clients of same Multicast IP group. any computer joins network, server stores the hostname of the computer in a vector table, and sends that host name and all other hostnames in the vector table "to all other computers already in vector table.."
moreover if any computer leaves the network,
it removes the name from the vector table and again sends the remaining hostnames in vectortable to the remaining computers...
Well nobody else knows about the join/leave except the client who is joining or leaving, so the client is going to have to send a join/leave notification multicast after it joins and before it leaves. If the other computers care who else is receiving multicasts. But why should they?
Similar Messages
-
XML file in the form of .config file how to convert it to class and store it in single object
Hi,
I have a config file in which i have to convert it to class and get an object.
example:
<?xml version="1.0" encoding="utf-8" ?>
<xyz xmlns="">
<Container name ="Basic">
<Connectivity user="" server="" protocol="udp"/>
<Connectivity user="" server="" protocol="udp"/>
</Container>
<Container name ="Cp">
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
<domain name="audio">
<section name="headset">
<setting name="audio_in_agc_enabled " value="1"/>
</section>
<section name="incoming">
<setting name="use_agc" value="1"/>
</section>
<section name="vad">
</section>
</domain>
<domain name="system">
<section name="qos">
<setting name="audio" value="tos 46"/>
</section>
<section name="dtmf">
<setting name="force_send_in_band" value="0"/>
<setting name="minimum_rfc2833_play_time" value="40"/>
</section>
<section name="network">
<setting name="dtx_enabled" value="0"/>
</section>
<section name="diagnostics">
<setting name="enable_logging" value="1"/>
<setting name="log_level" value="Error"/>
</section>
<section name="general">
<setting name="add_OS_version_to_user_agent_header" value="1"/>
</section>
<section name="indialog_notify">
<setting name="enable_indialognotify" value="1"/>
</section>
</domain>
<domain name="rtp">
<section name="2833">
<setting name="enabled" value="1"/>
<setting name="packet_time_in_ms" value="60"/>
<setting name="payload_number" value="101"/>
</section>
<section name="inactivity">
<setting name="timer_enabled" value="0"/>
</section>
</domain>
<domain name="proxies">
<section name="proxy0">
</section>
<section name="proxy1">
</section>
</domain>
<domain name="ggg">
<section name="device">
<setting name="use_headset" value="1"/>
<setting name="rrr" value="1"/>
<setting name="eee" value="480"/>
<setting name="eme" value="hhh"/>
<setting name="headset_name" value="vvv"/>
<setting name="manual_audio_devices_configure" value="0"/>
<setting name="audio_in_device" value=""/>
<setting name="audio_out_device" value=""/>
<setting name="ringer_device" value=""/>
</section>
<section name="system">
<setting name="export_settings" value="EndpointSettings.xml"/>
<setting name="enable_export_settings" value="0"/>
<setting name="log_level_AbstractPhone" value="0"/>
<setting name="log_level_Audio" value="0"/>
<setting name="log_level_Auto Configuration" value="0"/>
<setting name="log_level_CCM" value="0"/>
<setting name="log_level_Conferencing" value="0"/>
<setting name="log_level_Contacts" value="0"/>
<setting name="log_level_DNS" value="0"/>
<setting name="log_level_GUI" value="0"/>
<setting name="log_level_Jitter" value="0"/>
<setting name="log_level_Licensing" value="0"/>
<setting name="log_level_Media" value="0"/>
<setting name="log_level_Privacy" value="0"/>
<setting name="log_level_RTP" value="0"/>
<setting name="log_level_STUN" value="0"/>
<setting name="log_level_Security" value="0"/>
<setting name="log_level_Storage" value="0"/>
<setting name="log_level_Transport" value="0"/>
<setting name="log_level_USB Devices" value="Info"/>
<setting name="log_level_Utilities" value="0"/>
<setting name="log_level_Video" value="0"/>
<setting name="log_level_Voice Quality" value="0"/>
<setting name="log_level_XMPP" value="0"/>
<setting name="log_level_Endpoint" value="6"/>
</section>
<section name="beeptone">
<setting name="play_locally" value="0"/>
<setting name="enable_beeptone" value="1"/>
<setting name="beeptone_file" value="beep.wav"/>
<setting name="beeptone_timeout" value="30000"/>
</section>
<section name="dtmf">
<setting name="play_locally" value="1"/>
<setting name="pause_start_stop_dtmf" value="100"/>
</section>
<section name="control">
<setting name="auto_answer" value="0"/>
</section>
<section name="ctrol">
<setting name="auto_ans" value="0"/>
</section>
</domain>
</settings>
</Container>
</xyz>
Please help me out in creating an object from it.
Thanks,
HiranmayeeIt's one of those things you usually start from the other end.
IE with a class and then serialise / deserialize to xml.
Because you have a namespace in there:
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
I think you will find linq to xml will have issues with that.
You could still use xpath to pick data out of there and there's been a thread on the c# forum recently which is relevent:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2dc0581e-f2fd-4fd3-89ee-e59280c398e6/read-xml?forum=csharpgeneral
Why do you want to turn that into an object?
By the way.
This isn't a wpf question and you should probably have posted it on the c# forum.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML -
Can I use classes and methods for a maintenance view events?
Hello experts,
Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Thanks a lot guys!Hi viraylab,
1. The architecture provided by maintenance view
for using EVENTS and our own code inside it -
It is provided using FORM/PERFORM
concept only.
2. At this stage,we cannot use classes.
3. However, inside the FORM routine,
we can write what ever we want.
We can aswell use any abap code, including
classes and methods.
(But this classes and methods won't have any
effect on the EVENT provided by maintenance view)
regards,
amit m. -
What is the diff b/w Abstract class and an interface ?
Hey
I am always confused as with this issue : diff b/w Abstract class and an interface ?
Which is more powerful in what situation.
Regards
VinayHi, Don't worry I am teach you
Abstract class and Interface
An abstract class can have instance methods that implement a default behavior. An Interface can only declare constants and instance methods, but cannot implement default behavior and all methods are implicitly abstract. An interface has all public members and no implementation. An abstract class is a class which may have the usual flavors of class members (private, protected, etc.), but has some abstract methods.
Edited by SASIKUMARA
SIT INNOVATIONS- Chennai
Message was edited by:
sasikumara
Message was edited by:
sasikumara -
What is the field and Table for "Batch Class" and "Class Type" in QM.
Hi All,
What is the field and Table for "Batch Class" and "Class Type" in QM.
Thanks,Hi,
For batch class the class type value is '023' . This you can find from KLAH table and the fileld for class type is KLART..
And also all the data related to batch class are found in tables INOB, KLAH,KKSK and for the characeteristics of batch materials you can refer AUSP table.
In INOB table, for batch class, you need to give 023 in KLART field and value MCH1 in OBTAB filed.
Please check this and let me know if this you need any more details? -
Using java class and variables declared in java file in jsp
hi everyone
i m trying to seperate business logic form web layer. i don't know i am doing in a right way or not.
i wanted to access my own java class and its variables in jsp.
for this i created java file like this
package ris;
import java.sql.*;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class NewClass{
public static void main(String args[]){
Connection con = null;
ResultSet rs=null;
Statement smt=null;
try{
Class.forName("com.mysql.jdbc.Driver").newInstance();
con=DriverManager.getConnection("jdbc:mysql:///net","root", "anthony111");
smt=con.createStatement();
rs= smt.executeQuery("SELECT * FROM emp");
while(rs.next()){
String str = rs.getString("Name");
}catch( Exception e){
String msg="Exception:"+e.getMessage();
}finally {
try {
if(con != null)
con.close();
} catch(SQLException e) {}
}next i created a jsp where i want to access String str defined in java class above.
<%--
Document : fisrt
Created on : Jul 25, 2009, 3:00:38 PM
Author : REiSHI
--%>
<%@page import="ris.NewClass"%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>JSP Page</title>
</head>
<body>
<h1><%=str%></h1>
</body>
</html>I wanted to print the name field extracted from database by ResultSet.
but it gives error cannot find symbol str.
please help me to find right way to do this.
i am using netbeans ide.Very bad approach
1) Think if your table contains more than one NAMEs then you will get only the last one with your code.
2) Your String is declared as local variable in the method.
3) You have not created any object of NewClass nor called the method in JSP page. Then who will call the method to run sql?
4) Your NewClass contains main method which will not work in web application, it's not standalone desktop application so remove main.
Better create an ArrayList and then call the method of NewClass and then store the data into ArrayList and return the ArrayList.
It should look like
{code:java}
package ris;
import java.sql.*;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class NewClass{
public static ArrayList getNames(){
Connection con = null;
ResultSet rs=null;
Statement smt=null;
ArrayList nameList = new ArrayList();
try{
Class.forName("com.mysql.jdbc.Driver").newInstance();
con=DriverManager.getConnection("jdbc:mysql:///net","root", "anthony111");
smt=con.createStatement();
rs= smt.executeQuery("SELECT * FROM emp");
while(rs.next()){
nameList.add(rs.getString("Name"));
return nameList;
}catch( Exception e){
String msg="Exception:"+e.getMessage();
</code><code class="jive-code jive-java"><font>return nameList;</code><code class="jive-code jive-java">
}finally {
try {
if(con != null)
con.close();
} catch(SQLException e) {}
</code><code>return nameList;</code>
<code class="jive-code jive-java"> } -
Customizing FD01 and FB70 using PS Class and Characteristics
Hello SAP Experts
I have the following issue:
My client has a requirement where we need to customize the Customer Master (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS class and characteristics. Your opinions would be much appreciated.
Please kindly give your suggestions. Thanks in advance
Regards,
NikJoao Paulo,
Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
Nik -
FM/Class to find the class and characterstics for a given material
Hi All,
Is there any Class/FM to find the class and characterstics for a given material.I tried some BAPI_OBJCL* BAPI's but lot of the BAPI's need classnum as input parameter. But i need a BAPI or tables or class which can give the class and its characterstic values for a given material.Hi Ben
Try ..
BAPI_OBJCL_GETCLASSES
BAPI_OBJCL_CREATE -
Write message to Job log with message class and message number
hi folk,
When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
Please advice how to write a message with the message class and message number.
Best regards
LinhNgHi Linh,
How did you provide the text "Some message"? Did you hard code it or used a text element?
Regards,
Immanuel. -
Class override, how to create the child class and then the base class
I started to write a program for a smart DMM, the problem is every version of the DMM the company change the communication commend.
My idea is to write a child class for every DMM version and every SubVI of the child will override the base class SubVI.
My problem is, i want first to create one child class and after i will see every thing is work, start to create the base class. that way i will see if am thinking the right way.
My question is
How can i create a child class and then create the base class and configure the SubVi of the child class to be Override of the base class?
I tried to search in the property of the class but i didn't see nothing.
Thanks
Solved!
Go to Solution.This can be done and I've done it on occasion.
You simply create the base class with the dynamic dispatch methods you require (connector panes need to be identical to thos of the child class).
Then set the inheritance of the class to inherit from this base class. If your method is defined as a dynamic dispatch method in the parent, you'll most likely now have some errors (unless your child method was already DD in which case you might just be OK already).
To change the inheritance of a class, right-click the properties of the class in your project and select properties. I believe the ineritance tree is at the lower end of the properties. Click on the "change inheritance" (or something similar) to choose the class from which you now wish to inherit.
Say hello to my little friend.
RFC 2323 FHE-Compliant -
How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!
Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list. -
How we can use class and methods for the FM of reuse_alv_list_display
Hi Abapers,
Please provide the sample code of class and method of REUSE_ALV_LIST_DISPLAY.
Which Class i can use for this Function module.
I need to write a code using OOPS concept.
I was done the GRID display using this class cl_gui_alv_grid.
But i want only List Display using the class & methods.
Plz provide sample code.
Thanks
Nani.Hi Nani,
This is the sample code..
*& Report Z_OO_ALV
*& We can Use Two containers in OOALV
REPORT z_oo_alv LINE-COUNT 50.
*types gt_struct type sflight.
DATA BEGIN OF gt_struct.
INCLUDE STRUCTURE sflight.
DATA rcol(4) TYPE c.
DATA colors TYPE lvc_t_scol.
DATA END OF gt_struct.
*ALV GRIDs
DATA gr_alvgrid TYPE REF TO cl_gui_alv_grid.
DATA gr_alvgrid1 TYPE REF TO cl_gui_alv_grid.
DATA gc_custom_control_name TYPE scrfname VALUE 'CC_ALV'.
DATA gc_custom_control_name1 TYPE scrfname VALUE 'CC_ALV1'.
*CONTAINERs
DATA gr_ccontainer TYPE REF TO cl_gui_custom_container.
DATA gr_ccontainer1 TYPE REF TO cl_gui_custom_container.
*FIELDCATALOGs
DATA gt_fieldcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA gt_fieldcat1 TYPE lvc_t_fcat WITH HEADER LINE.
*LAYOUTs
DATA gs_layout TYPE lvc_s_layo.
DATA gs_layout1 TYPE lvc_s_layo.
DATA pt_exclude TYPE ui_functions. "internal table declaration to be passed.
*DATA pt_cell TYPE lvc_t_cell with header line.
DATA : gt_list LIKE gt_struct OCCURS 50 WITH HEADER LINE,
gt_list1 LIKE gt_struct OCCURS 50 WITH HEADER LINE.
*DATA v_ucomm TYPE sy-ucomm.
CALL SCREEN 100.
*& Module display_alv OUTPUT
text
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE. " display_alv OUTPUT
*& Module PAI INPUT
text
MODULE pai INPUT.
CASE sy-ucomm.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN 'PICK'.
PERFORM cell_info.
ENDCASE.
ENDMODULE. " PAI INPUT
*& Form display_alv
text
FORM display_alv.
PERFORM prepare_field_catalog CHANGING gt_fieldcat[].
PERFORM prepare_layout CHANGING gs_layout.
PERFORM data_retrival.
IF gr_alvgrid IS INITIAL.
CREATE OBJECT gr_ccontainer
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM exclude_tb_functions CHANGING pt_exclude.
PERFORM set_col.
CALL METHOD gr_alvgrid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = pt_exclude "excluding toolbar functions
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list[]
it_fieldcatalog = gt_fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
PERFORM prepare_field_catalog1 CHANGING gt_fieldcat1[].
PERFORM prepare_layout1 CHANGING gs_layout1.
PERFORM data_retrival1.
IF gr_alvgrid1 IS INITIAL.
CREATE OBJECT gr_ccontainer1
EXPORTING
container_name = gc_custom_control_name1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid1
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer1
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_col1.
CALL METHOD gr_alvgrid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout1
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list1[]
it_fieldcatalog = gt_fieldcat1[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "display_alv
*& Form prepare_field_catalog
text
-->GT_FIELDCAT text
FORM prepare_field_catalog CHANGING pgt_fieldcat TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'CARRID'.
ls_fieldcat-scrtext_m = 'Air line code'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'CONNID'.
ls_fieldcat-scrtext_m = 'Connection code'.
ls_fieldcat-emphasize = 'C900'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'PRICE'.
ls_fieldcat-scrtext_m = 'PRICE'.
APPEND ls_fieldcat TO pgt_fieldcat.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout
text
-->GS_LAYOUT text
FORM prepare_layout CHANGING gs_layout TYPE lvc_s_layo.
gs_layout-stylefname = 'FIELD_STYLE'.
gs_layout-zebra = 'X'.
gs_layout-grid_title = 'FLIGHT'.
gs_layout-sel_mode = 'A'.
gs_layout-ctab_fname = 'COLORS'.
ENDFORM. "prepare_layout
*& Form data_retrival
text
FORM data_retrival.
SELECT carrid
connid
price
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list
UP TO 50 ROWS.
ENDFORM. "data_retrival
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD gr_ccontainer->free.
CALL METHOD gr_ccontainer1->free.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STAT'.
SET TITLEBAR 'xxx'.
IF W_CUSTOM_CONTAINER IS INITIAL.
**sets TITLEBAR
PERFORM TITLEBAR.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form prepare_field_catalog1
text
-->GT_FIELDCAT text
FORM prepare_field_catalog1 CHANGING pgt_fieldcat1 TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-fieldname = 'SEATSMAX'.
ls_fieldcat-scrtext_m = 'MAX. SEATS'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = ' '.
APPEND ls_fieldcat TO pgt_fieldcat1.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'SEATSOCC'.
ls_fieldcat-scrtext_m = 'SEATS OCCUPIED'.
APPEND ls_fieldcat TO pgt_fieldcat1.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout1
text
-->GS_LAYOUT text
FORM prepare_layout1 CHANGING gs_layout1 TYPE lvc_s_layo.
gs_layout1-stylefname = 'FIELD_STYLE'.
gs_layout1-zebra = 'X'.
gs_layout1-grid_title = 'DETAILS'.
gs_layout-sel_mode = 'C'.
gs_layout1-info_fname = 'RCOL'.
gs_layout-no_toolbar = 'X'.
ENDFORM. "prepare_layout
*& Form data_retrival1
text
FORM data_retrival1.
SELECT seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list1
UP TO 50 ROWS.
ENDFORM. "data_retrival
*& Form exclude_tb_functions
&---- subroutine to exclude toolbar options -
text
-->PT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_maximum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_minimum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sort.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_filter.
APPEND ls_exclude TO pt_exclude.
ENDFORM. "data_retrival1
*& Form cell_info
text
FORM cell_info. "CHANGING pt_cell TYPE lvc_t_cell.
DATA lt_cell TYPE lvc_t_cell WITH HEADER LINE.
CALL METHOD gr_alvgrid->get_selected_cells
IMPORTING
et_cell = lt_cell[].
LOOP AT lt_cell.
WRITE : lt_cell-col_id , lt_cell-row_id.
ENDLOOP.
MODIFY pt_cell[] from lt_cell[].
ENDFORM. "cell_info
*& Form set_col
text
FORM set_col .
DATA ls_cellcolor TYPE lvc_s_scol.
LOOP AT gt_list.
IF gt_list-price GT 500.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 5.
ls_cellcolor-color-int = 1.
ls_cellcolor-color-inv = 0.
APPEND ls_cellcolor TO gt_list-colors.
else.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 3.
ls_cellcolor-color-int = 1.
APPEND ls_cellcolor TO gt_list-colors.
ENDIF.
MODIFY gt_list.
ENDLOOP.
ENDFORM. "set_col
*& Form set_col1
text
FORM set_col1.
data : ind type sy-tabix,
indx type sy-tabix.
loop at gt_list1.
ind = sy-tabix / 2.
indx = sy-tabix - ind.
if indx eq ind.
gt_list1-rcol = 'C500'.
endif.
MODIFY gt_list1.
endloop.
ENDFORM. "set_col
*FORM TITLEBAR.
*SET TITLEBAR 'TITLE'.
*ENDFORM.
*double click on TITLE and write ur title
Thanks,
Samantak.
Rewards points for useful answers. -
Document Classes and other Questions
Basically, i am working on an application that will eventually be deployed to the desktop as an AIR application.
I am wanting to create an Analogue clock and Digital clock with a button that toggles the display between either one when pressed. As well as this, i will be wanting to display the Date below, i am having a number of issues however.
I have the code sorted for three of the four components, i have not attempted to figure out the button thus far as i would be more than happy to have the digital clock, analogue clock and date all being displayed on a drag and drop desktop application first. When i say i have it sorted, i have a fully working analogue clock which i have managed to display on the desktop through air on its lonesome, however, i did not include the drag and drop function. For the digital clock and date components i am not sure how to configure them into document classes. The main issue i am having is i do not know if you can reference a dynamic text box within a movie clip to a document class.
This is the code to show the date
[code]{
var currentTime:Date = new Date();
var month:Array = new Array("January","February","March","April","May","June","July","August","September","Octo ber","November","December");
var dayOfWeek:Array = new Array("Sunday","Monday","Tuesday","Wednesday","Thursday","Friday","Saturday");
date_text.text = dayOfWeek[currentTime.getDay()] + " " + currentTime.getDate() + " " + month[currentTime.getMonth()] + " " + currentTime.getFullYear();
[/code]
I have put the actionscript frame inside the movie clip file, and i have given both the movie clip, and the dynamic text box within the movie clip the instance name "date_text".
Basically, i am just struggling in how to put this code into a working document class, since the digital clock and date functions are both, some what similar, i feel the solution to one will more than likely lead to me discovering the solution for the other.
The other problem i am having, i do not know how i will display all of the components on one air application. I am assuming, that you create one other document class file which links the other four together? i have tried to do this by just linking a new FLA file with the analogue clock, but it does not work. The code for that is below.
[code]package
import flash.events.Event;
import flash.display.MovieClip;
public class time1 extends MovieClip
public var now:Date;
public function time1()
// Update screen every frame
addEventListener(Event.ENTER_FRAME,enterFrameHandler);
// Event Handling:
function enterFrameHandler(event:Event):void
now = new Date();
// Rotate clock hands
hourHand_mc.rotation = now.getHours()*30+(now.getMinutes()/2);
minuteHand_mc.rotation = now.getMinutes()*6+(now.getSeconds()/10);
secondHand_mc.rotation = now.getSeconds()*6;
[/code]
That is the original clock document class (3 Movie clips for the moving hands, and the clock face is a graphic, which i may have to reference somehow below)?
[code]package
import flash.display.MovieClip;
public class main extends MovieClip
public var hourHand_mc:time1;
public var minuteHand_mc:time1;
public var secondHand_mc:time1;
public function main()
hourHand_mc = new SecondHand();
addChild(mySecondHand);
hourHand_mc.x = 75;
hourHand_mc.y = 75;
minuteHand_mc = new SecondHand();
addChild(mySecondHand);
minuteHand_mc.x = 75;
minuteHand_mc.y = 75;
secondHand_mc = new SecondHand();
addChild(mySecondHand);
secondHand.x = 75;
secondHand.y = 75;
}[/code]
This is my attempt at creating the main document class in a seperate FLA file to attempt to load the analogue clock, and later on the Digital Clock, Date Function and Toggle Display button in the same AIR application.
Any help on this is much appreciated, i have been reading up a lot on it through tutorials and the like, but i can't seem to fully grasp it.why do you have code in a movieclip?
if you want to follow best practice and use a document class you should remove almost all code from timelines. the only timeline code that might be reasonably used would be a stop() on the first frame of multiframe movieclips.
so, you should have a document class. that could contain all your code but it would be better to just have your document class create your 2 clocks and date objects and possibly manage toggling between the two clocks. you could have a separate class the tracks the time and date and that class is used by your two clock classes and your date class. -
My web page uses a Java Applet to allow my visitors to replay chess games; the Chess Viewer Deluxe applet was written by Nikolai Pilafov some time ago and has been working properly for some time (until recently). I don't monitor this part of my site regularly so I am not sure when it began to fail. On his web site [http://chesstuff.blogspot.com/2008/11/chess-viewer-deluxe.html] he has a link to check LiveConnect object functionality (which fails for OBJECT tags). His recommendation is to "seek platform specific support which might be available from the JRE developers for your platform".
I have been getting java.lang.ClassNotFoundException: ZeroApplet.class and java.lang.ClassNotFoundException: JavaToJS.class crashes with JRE version 1.6.0_26-b03-384-10M3425 VM executing a Java Applet. Until I checked the LiveConnect object functionality, I was unable to identify the source of the console error messages. This does seem to be the smoking gun.
Is Apple aware of this problem? Are these classes no longer supported? Has anyone else had this problem? You can attempt to recreate the problem locally by going to my web page: http://donsmallidge.com/DonSmallidgeChess.html
Thanks in advance for any help you can provide!
Abbreviated Java Console output:
Java Plug-in 1.6.0_26
Using JRE version 1.6.0_26-b03-384-10M3425 Java HotSpot(TM) 64-Bit Server VM
load: class ZeroApplet.class not found.
java.lang.ClassNotFoundException: ZeroApplet.class
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:211)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:144)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:662)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:807)
at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2389)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
at sun.applet.AppletPanel.run(AppletPanel.java:368)
at java.lang.Thread.run(Thread.java:680)
load: class JavaToJS.class not found.
java.lang.ClassNotFoundException: JavaToJS.class
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:211)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:144)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:662)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:807)
at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2389)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
at sun.applet.AppletPanel.run(AppletPanel.java:368)
at java.lang.Thread.run(Thread.java:680)I just went up to check the LiveConnect object functionality page AND IT WORKED THIS TIME! I must confess, this is very mysterious. I will do some more checking and reply here if I can determine why it is working now (and more importantly, why it didn't work before).
-
I don't know what's wrong with my code. it's about class and object.
* This is generic type of Person
package myManagement;
* @author roadorange
public class Person {
private String SS;
private String firstName;
private String lastName;
private String middleName;
private String phoneNumber;
private String address;
private String birthDay;
public void setSS (String SS) {
this.SS = SS;
public String getSS() {
return SS;
public void setFirstName (String firstName) {
this.firstName = firstName;
public String getFirstName() {
return firstName;
public void setLastName (String lastName) {
this.lastName = lastName;
public String getLastName() {
return firstName;
public void setMiddleName (String middleName) {
this.middleName = middleName;
public String getMiddleName() {
return middleName;
public void setPhoneNumber (String phoneNumber) {
this.phoneNumber = phoneNumber;
public String getPhoneNumber() {
return phoneNumber;
public void setAddress (String address) {
this.address = address;
public String getAddress() {
return address;
public void setBirthDay (String birthDay) {
this.birthDay = birthDay;
public String getBirthDay() {
return birthDay;
public void Person() {
SS = "1234567890";
this.firstName = "abc"; //test the keyword "this"
this.lastName = "xyz";
middleName = "na";
phoneNumber = "123456789";
address = "11-11 22st dreamcity ny 11111";
birthDay = "11-11-1980";
public void print() {
System.out.println("Display Database\n"
+ "Social Security Number: *********" + "\n"
+ "First Name: " + getFirstName() + "\n"
+ "Middle Name: " + getMiddleName() + "\n"
+ "Last Name: " + getLastName() + "\n"
+ "Phone Number: " + getPhoneNumber() + "\n"
+ "Address: " + getAddress() + "\n"
+ "getBirthDay: " + getBirthDay() );
package myManagement;
//this class is used to test other class or test other object
public class testClass extends Person{
public static void main(String[] args) {
Person obj1 = new Person();
obj1.print();
System.out.println(obj1.getFirstName()); //test the object
Result:
Display Database
Social Security Number: *********
First Name: null
Middle Name: null
Last Name: null
Phone Number: null
Address: null
getBirthDay: null
null
i don't know why it's all null. i assign something in the default constructor. it shouldn't be "null".
does anyone know why?when you create 2 class using netbean editor, person.java and test.java
i never compile person.java.
when i finish typing these 2 class and i just right click test.java and run.
my question is do i need to compile person.java before i run test.java directly??
does Netbean compile it automatically when i run test.java first time?
i add another constructor Person constuctor with one parameter in Person.java and create 2nd object to test the 2nd constuctor and run.
All the codes work, so does the first default constructor. i don't why is that.
Then i removed what i added and restore back to where it didn't work before and test again. it works.
@_@. so weird.
problem solved. thank you
Edited by: roadorange on Feb 25, 2008 7:43 PM
Maybe you are looking for
-
Updating my IPOD Touch to OS 4.1
when trying to update to OS a message appears "An error occurred while backing up this ipod (-120) Would you like to continue to update this ipod without back up? Continuing without backup will result in the loss of all contents on this ipod" Is it O
-
Error while creating logical port in SOAMANAGER and testing it
Hi, When I enter WSDL Access user and password in cnfiguration tab( SOAMANAGER),Im getting error as, Error: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:401Unauthorizedhttp://cryo-cell.net/Inventory/Inve
-
How do I upload a PDF not made in keynote, pages, or numbers to iCloud?
Trying to upload a PDF to iCloud so i can view iton all my devices. Used to be able to do this by dragging it to iDsik. But my iDisk icon is now gone and I would like to still use this feature.
-
Defining cmp-relation to EB contained in different ejb module project
Hello, I have to migrate an existing J2EE Application to SAP NetWeaver and WebAS. My task is to keep the structure as similar as possible to increase the recognition factor although using Developer Studio as IDE. In this application there are cmp rel
-
Is a 60watt MagSafe Power Adapter compatabile for a MacAir?
I have a 45watt Mag Safe Power Adapter for my MacAir. I also have a 60 watt Mag Safe Adapter, and says on box, only for MacBook/Pro. Can I use this for my MacAir??