Multiclip - adding angle - WHAT is used as the sync point???

When I try to add a clip to a multiclip, I cannot discern the rational FCP is using in determining where the new clip lands in timing to the others already present. My multiclips are In-point based. Tried every combination of ins, no ins, beginning of clips, etc etc. It seems to add different amounts of black to the newly added clip, but there's no correlation I can see of the amount added. HELLLLP!

Manual says just drag a new clip onto the current multiclip. But it no info as to how the sync is established. I'm working on a music vid with non-match TC, and have a few angles to add to an exisiting multiclip, that was created via In-points. No matter how I try to align the multiclip & the new clip to be added, I just can't get anything even remotely close to match points. UPDATE: wouldn't you know it - I just tested this on some clips from another project that have some matching TC - and it works! I didn't test all the variations, but I lined up 2 clips at matching code, and no problem. %!#$@$%$! So another half-implementation of a feature.

Similar Messages

TS1503 Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.

Hi there AnthPy,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
-Griff W.

What to use for the events of 2 keys pressed simultaneously?

Question:
What to use for the events of 2 keys pressed simultaneously? As the key listener has limited functionality, in this case, I need something that can act to two events (see below)
Goal
1. A user presses right and up at the same time
2. Program responds to this event changing BOTH the vertical and horizontal speeds of the player
Problem
I currently have a key listener to do this, using key pressed, however, it only acts to up OR right at one point in time. So the user can only increase his or her vertical speed; or horizontal speed at one point in time. Instead of increasing them both.
Example
Here is an example of the game: http://www.kongregate.com/games/MINDistortion/bubbles-2

DarrylBurke wrote:
I don't know whether there's a better way (or whether this will work as expected), but I would try setting a boolean flag on keyPressed and reset the flag on keyReleased, for each key of interest. To compute the x / y movements, I would check the state of all flags.
dbI was thinking about your answer a few nights ago. And I was like, wait... it works! I thought, at first (as I replied before) that it wouldn't work, but I refract what I said. Its actually a very simple solution. And I apologize for questioning your solution previously. Thanks so much!
P.S. I tested it out. Works like a charm.
-Create booleans to handle each key
-Set to true on press
-Set to false on release
-Check and update in separate thread accordingly

How do you change the sync point?

Hi,
I have a clip and the audio track is synced, the little line that connects the audio to the video is on say frame 10, but I want to trim 20 frames off the beginning, it I do and hit delete the audio is delete too. How do I move the sync point to some point after what I want to trim, yet maintain the same sync,
Thanks
Rich

I think I know what you are trying to do. To move the clip connection or connect to another clip select the clip who's connection you want to move (your audio clip in this case) alt + cmd click where you want the new connection to be from (further along the clip i.e. > frame 20 in your case). The clip connection moves to this new point, if this point on your story line is another clip it connect to the new clip.

How to change what is used for the condition base value

I have a new condition type that I want to always get its conditon base value from a list price total in the pricing procedure.
Do I need to do this in a routine? If yes, can you give more details on what should be in the routine.
Thanks

The new condition(ZXXX) which should always have the base value amount of the list price -
Settings
ZXXX in transaction v/06- when defining this condition you have a field under Master data - to use it as reference condition type
over here you can mention the condition for the list price. than it should work.
Hope this helps
Cheers
jasmeet

How do I check to see WHAT'S using up the most storage.

I have a 500gb Drive but only 11 free. Wanted the best way to see what's using up space. I can randomly hit command I on folders and check that way, but was wondering if there was a way to see a document or spreadsheet, or pie chart of everything taking up space. Thanks all.

Not really, no. I'm sure there's probably a command-line program that might give you similar information, but that's not for the faint of heart.
If you are feeling brave you could try something like this:
open
Applications > Utilities > Terminal
and in the Terminal Window type:
find the Path to the folder -ls | cut -c 48-200 | sort -rn | more
this will create a directory listing for all the files in the folder and its subfolders and sort them reverse by size and print a listing. The first column contains the file size in Bytes and pipes the listing thru more. You will have to enter a blank to advance and a q to quit.
For example, on my MBP the following command gives this result:
find /Users/dreschle/Music/iTunes/iTunes\ Music/The\ Beatles -ls | cut -c 48-200 | sort -rn | more
[Eliza:~] dreschle% find /Users/dreschle/Music/iTunes/iTunes\ Music/The\ Beatles -ls | cut -c 48-200 | sort -rn | more
    7169513 29 Jan 15:39 /Users/dreschle/Music/iTunes/iTunes Music/The Beatles/The Beatles 1967-1970/1-13 Hey Jude.m4a
    6881372 6 Feb 07:15 /Users/dreschle/Music/iTunes/iTunes Music/The Beatles/1/21 Hey Jude.m4a
    5192915 29 Jan 15:39 /Users/dreschle/Music/iTunes/iTunes Music/The Beatles/The Beatles 1967-1970/1-06 A Day In The Life.m4a
    4875828 29 Jan 15:39 /Users/dreschle/Music/iTunes/iTunes Music/The Beatles/The Beatles 1967-1970/2-02 While My Guitar Gently Weeps.m4a
    4684951 29 Jan 15:39 /Users/dreschle/Music/iTunes/iTunes Music/The Beatles/The Beatles 1967-1970/1-08 I Am The Walrus.m4a ......
and I see that from all Beatles albums I own the biggest is "Hey Jude" with 7 MB
If you want to use this command often you could create a shell script, an an apple script or an automator Workflow.
Good Luck
Leonie Lionheart

How do I find out what is using up the majority of my 128GB storage

I am at full capacity on my 128GB MacBook Air, I initially thought that I was using it up with photos but evidently after looking in "About my mac", then "More info" and then "storage" which gives me a crude break down of what my storage is being used for. I am only using 48GB for photos and a little for music, then the rest is classed as "Other". What is this other?!?!? And how can I get rid of it?
Hope someone can shed some light of this?!
Thanks in advance :-)

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

HT201320 I use my college's email address through outlook and I don't know what you use for the incoming and outgoing host?

My email is though the college where I work. We use Outlook, and I am trying to set up my email but I am not sure what to use for my incoming and outgoing host information.

Ask your college. Most likely the same settings as you have set in Outlook.

What to use for the replace XSLT for 0xA charater?

We are getting data from a vendor and in some text it has a 0xA hex value (newline) in it. I am looking at using a the replace function to remove this from the string but I was not sure what to tell the replace function what to search for. I am using 11.1.1.6 Jdeveloper
Sorry if this is not the correct place to post this question and thank you for any assistance.

Please look at the following link :
http://stackoverflow.com/questions/552762/removing-all-n-r-characters-from-a-node-xslt
Basically, use the translate(., '
', '') function.

How to view what is using up the temporary tablespace

Hi all
I am running into a problem - my temporary tablespace is being completely used up.
How would i find out what is using up this? Technically it has enough space to function properly but now we are getting 0 bytes free.
thanks!

There is nothing wrong if a temporary tablespace appears as full. It is very normal. I
For more information about temporary tablespace usage query V$SORT_USAGE and V$SORT_SEGMENT .
For more information go to this link
http://asktom.oracle.com/pls/ask/f?p=4950:8:14327914180898764224::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:374218170986

HT3325 Can the remote be used with the laser/pointer?

The latest update of keynote support wireless remote control with mirror display on hand, which is great. But, this would be perfect if it would allow to remotely (wirelessly) use the laser/pointer available in keynote presentation mode. Is that possible?

Thanks. I understand, but my question referred to use 2 iPads to make the presentation, one connected to the projector and the other in hand.

Question: What is use of the port directly next to the Zen Touch headphone ja

Directly next to the ZT headphone jack is another connector. What is that intended to be used for?

Hot_Guitar,
For this:
http://us.creative.com/products/prod...y=57&product=5
Jeremy

I installed update to Mozilla 25 using Premium Installer. Is this what is used for the install?

I was prompted to update to Mozilla 25. When I did the install, it was done using Premium Installed. Mozilla was not mentioned any where. Was this install correct or did I infect my machine with bogus software?

Definitely bogus. Someone over at MozillaZine reported this yesterday. See:
http://forums.mozillazine.org/viewtopic.php?f=38&t=2774195 virus: fake firefox update
<blockquote> '''Quote:'''<br>
Just now, when I opened firefox, a dialog appears indicating my firefox browser is out of date and ask me to click ACCEPT to update. I clicked and then a file 'Updater_Setup.exe' is downloaded and saved. I run the file trying to update. The what happens is completely different from my previous firefox updates.
when I run the downloaded file, a dialog appears indicating a program 'Premium Installer' by TINY INSTALLER is going to run; I click run, then a dialog saying " thank you for choosing our software" I click get started, it comes out another dialog indicating "Express Install 'you are less than 30 seconds away!". I continued, the SW seems trying to install a serial of tools such as Mixi Dj. Definitely, this is not a firefox update. I am wondering whether this Updater_Setup.exe is a virus, malware? Thanks
</blockquote>
Be sure to scan your computer for malware or seek help in a forum specializing in malware removal - see [[Troubleshoot Firefox issues caused by malware]] for recommendations.

TS2391 Took my Mac in for repairs they reset my com I lock it and do not know what they use as the passcode

I took my Mac in to have keyboard replace and the upper and bottom case replace as well. They reset my com and the fool that i'am lock the com. And have no way know what the pass code they use.?

Not sure what "com" is. If they reset the user password, frequently it's empty. Leave the field empty and hit enter. If that doesn't work I'd call and ask what they set it to.

How can I tell what is using up the space on my hard drive?

My computer has been messing up for a while, giving me the message "startup disc almost full". I only have 4 gb free space now, after throwing all my photos and music onto external drive. What is making my disc so full? All the rest of my files are text? How can I figure out what is taking up so much space? Thanks

Moving iTunes music is more involved than a simple
drag and drop affair; you would be making copies on
some other media, but could be leaving duplicates or
originals on the hard drive in the process. Same with
images and iPhoto derived items. There are some
Apple Support documents on how to manage these.
The user folder has things in it you have installed;
generally your saved items would be found in there.

Multiclip - adding angle - WHAT is used as the sync point???

Similar Messages

Maybe you are looking for