Multiclip angle goes black in viewer for certain clips

Hi all,
I have the strangest thing happening. I have two 45 min clips used in a multiclip. I edited the whole thing switching and cutting between the two and whatnot. So, now when I go back to it, on certain clips one camera angle will be blacked out in the viewer only (when multiple angles are showing in the viewer).
Also, under the playhead sync drop down menu in the top center of the viewer window, the 2nd camera angle isn't available as an option. It only see's the first one.
I wonder if this is a bug? It is extremely annoying because I can no longer switch camera angles for those clips.
Anyone else have this happen?

hey Pete
theres another thread I think you may already have spotted
http://discussions.apple.com/thread.jspa?threadID=213768&tstart=0
... anyway, in case not, the gist seems to be that rendering (manually or because of auto-render) whilst still building an active multiclip edit causes some problems with the playback.
try toggling off/on track visibility so as to lose any renders on the sequence (or copy and paste your cut into a new sequence, or using the Tools > Render Manager... to delete your renders for the sequence etc etc)
hope it helps
Andy

Similar Messages

My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

What's with the my mac going black after sitting for awhile? This tarted happening after I downloaded Lion. Other stuff too, like all these pages pop up, like my calendar and such.

What's with my screen going black and I can't escape or do anthing except push the power button off and turn it on again? This all started after I downloaded Lion. Other pages pop up when I turn it on too, like my calendar and apps and such. I have to click off all these every time I turn my computer on. Thanks for any info.

You're in the wrong forum. Post here.
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
or here
https://discussions.apple.com/community/desktop_computers/imac_intel?view=discus sions#/?per_page=50

Phone Randomly Goes Black in iOS7.0.2

Ever since installing the update to 7.0.2, my phone randomly locks up then goes black and unresponsive for a time, no matter what I do to try to restart. After a few minute the phone restarts. The kicker is I though the update to iOS7.0.2 was supposed to decrease bugs, not create ones that didn't happen before!

Hello Raymond Swanson,
Thank you for using Apple Support Communities.
I have a couple of things to recommend here. First, reset your iPhone with this article and see how it works for a little bit:
Resetting your device
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
From: iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists after that, I would backup your phone to iTunes and then restore it from your backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
All the very best,
Sterling

T500 LCD goes black when plugged in

As the Title says I have a Lenovo Thinkpad T500 model, and I've had it for going on two years now with no problems, that is until now. The problem is whenever i plug in my Laptop to the power cord the screen goes black after flickering for a few moments, you can kind of see the screen but barely.
I sent my laptop into the factory where they told me it would cost about $950 to fix a cracked LCD, which I would much rather fix myself for $100, but I do not think that a cracked LCD panel would make my PC go black only when the power cord is plugged in. Especially since the LCD Panel has been cracked much longer than my computer has been doing this.
I haven't really seen much on google searches about this problem, but I'm prone to believe it's a hardware problem, perhaps a short somewhere, but I doubt it's the LCD panel. Anyways what I'm wondering is, could there be something, other than a cracked LCD, that would make my laptop do this? Thanks any advice will do!

The main difference for the LCD between unplugged and plugged in is the refresh rate. By default the unplugged refresh rate is 50 Hz and plugged in it changes to 60 Hz. The switch between modes causes a black screen for a second while the display settings are updated. Power Manager is the software that manages this (there is an option for it in Power Manager). If you want to experiment with things you could try turning this option off in power manager. You could also try manually changing the display refresh rate in the advanced display settings. It seems possible that the cracked/damaged screen could cause it to be unable to work properly on the 60 Hz setting.

Premiere CS4 timeline goes black - refresh problem?

Every time I try to edit in premiere pro CS4, after a while (or straight away) the timeline goes black. Everything around the clips (not including the clips) goes black and I can see anything on the timeline except the clips. If I move the timeline off the screen and back on it refreshes normally? This problem in intermittent by persistent. I have done all the updates for premiere and my graphics card.
My system is:
OS: Win7 64Bit
Intel core i7 920
6GB Ram
ATI HD5770 1GB GDDR5
C drive is 200GB SATA1
Thanks

Hi,
I had an almost identical problem.
Windows 7 64bit
Premiere Pro CS4 4.2.1
Cineform neoscene
Nvidia GT240 (latest driver 257.21)
Premiere pro would work fine until I loaded up internet explorer, then the timeline would go black as soon as I dragged a clip around. I needed to completely log out of windows to get the timeline visible again after moving a clip.
I switched to firefox, but that had the same effect.
However I then tried the seamonkey browser and premiere now works fine!
Hope this helps.
Kerrin

Multiclip angles show black in angle viewer

All of a sudden my Multiclip angle viewer stopped showing angles. All I see are black frames. Everything else works, I can switch angles etc. Trashed the prefs, deleted renders and rebuilt thumbnails but the problem persists. I opened an old tutorial project from Ripple Training and the problem is there as well:
What maybe causing this?
I'm on FCP X 10.0.5 late 2011 MacBook Pro with 16 Gigs of RAM.

I have this problem too, but it's only on certain sections of the project. If I delete the render files, then I can see the clips properly in the angle viewer. But the next time I switch angles or blade the movie (it's not entirely clear or consistent what triggers it) then both the frames in the Angle Viewer go black.
Any thoughts? It's started recently, and I haven't tweaked anything I can think of.
Martin S Taylor

(early 2014) rMBP abruptly goes black (sleep mode) when computer is tilted at certain angles or lifted.

My (early 2014) rMBP abruptly goes black (sleep mode) when computer is tilted at certain angles or lifted. Ive reset Energy saver mode to factory defaults and the problem still occurs.

Please make a Genius Appointment and take it in for service.

Open ibook past 45 degree angle and screen goes black

My iBook's screen goes black once it gets opened past about the 45 degree angle. I purchased it in July 2001...is this the life expectancy of an iBook? It has been repaired many times and still has OS 9 (bc the CD drive doesn't work so I can't update it) so is it just old and junked?! Thankfully I have a eMac now, but it's nice to have my laptop available also.
Thanks for any and all help in this matter!
Kelly

Hi, Kelly. Welcome to Apple Discussions.
DT & T Computer Services will repair the inverter cable for you for $125 plus shipping. They also do free diagnostics, so if that isn't what's wrong, they can tell you what is and how much it will cost to fix it.
Good luck.

Cannot view movie, screen goes black

Download movies from itunes (usually with difficulty...doesn't seem to want to transfer on 1st or more tries). Once I get the movie, the screen goes black part way through viewing. At this point, video folder also shows a black screen. Took ipad back to apple store, they were not sure what to do so gave me new ipad. Same problems. Is it my itunes account that is a problem? Is it a bad ipad cable? I can sync music and apps easily...am I doing something wrong? (movies are HD-SD and no warning comes up that they cannot be viewed on ipad).

I read your other post as well that was directed to me ...
"Question to Demo....I have same problem and tried your suggestions. Instead of black screen when I open Video folder or by searching for movie name, I get small white text at top of black screen and searching circle in middle of screen...this disappears after approximately 5 seconds. No movie."
I have no idea what the small white text might be, but in your post above you mention that moving the movies from the computer into the iPad has been difficult and/ or problematic, so I suspect that the problem with the movies has something to do with that scenario.
I don't believe that the problem lies within the cable if you can sync and transfer other content. You could try another cable if you have one and see if that helps.
Do you by any chance live in the U.S.? If you do, movies (most movies that is) can be downloaded again at no charge as long as you use the same Apple ID that you both them with. So my suggestion would be to delete the movie from the iPad and download it again - but download it directly on the device and not use iTunes at all.
If you are in the U.S. you can go to iTunes on the iPad and tap on the purchased tab. Then tap the "View" button in the upper left corner and bring up "Movies". If your purchased movie is in there, delete it from your iPad and download it again. You can delete the movie by going to Settings>General>Usage>Storage>Videos and then swipe across the movie to bring up the delete button. Then go to iTunes and download it again.
You should not have to use another media player in order to play the movies from iTunes.

One mov file plays in Media Viewer on Ext Hd Drv, imported into FCPX it plays 5 sec then goes black. No problem with other mov files.

One mov file plays in Windows Media Viewer in Ext Hd Drv. Imported as Proxy Media into FCPX it plays in both Event and Time Line for 5 seconds, then goes black. No problem with many other mov files in same project. Tried converting this one file into MP4, but produced only pixellated jumble.

Can you open the clip in the QuickTime player? What are the specs shown in the inspector?

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

Screen goes black for 3 seconds in premiere CS5 every time I click

This is the first time I run Premiere CS5... On a fresh system install.
I suspect it's not playing well with my video card, a Radeon HD 4870 with 1GB Ram... Very standard stuff. I am running window 7 64 bit with 12 gb RAM, a week old build. I have all the updates and latest drivers, sigh. After Effects CS5 runs fine, Maya 2010 runs fine, Quicktime runs fine... What gives.
Here's what happens: I only need to launch Premiere, right away I get the problem. The screen goes black 3 seconds before the prompt to create a new project. Once I create the project, the application workspace comes in, but if I click any menu, drag a tool window (whatever they are called), the screen goes black 3 seconds then comes back. Its basically impossible to work...Huge drag.
Update:
The problem stopped after I went into the 'device settings' in preferences and set the device to 'none'....When I clicked on the device settings panel, my monitor went black, and there was a 'no signal' warning that came up, as if the DVI-D signal was dead. I was able to restore the signal by hitting ctrl-alt-del which switched me out of Premiere onto the desktop. Clearly, there is some issue with video. I switched back into Premiere and was able then to set to no devices.
I'm not doing any capture at the moment, but I can only pray that it's some sort of bug related to not having a device connected? I plan on bringing footage from a RED in the next month. I upgraded to CS5 specifically so that I could use more than 4 gigs of RAM and for the new features.

THank you for sending this.
I followed the benchmark directions, and I get an error at the final step
when I run the script:
line 99
Error: path not found
I tried for an hour different things, namely to re run the whole test
procedure, deleting the output files, etc... he script is looking for
something in the preview files that it is not finding. I think the procedure
was written for a previous version, because the metadata settings are
different in my version of AME, and I don't know how much that affects it.
Also, AME increments the file names when it renders them so that I did not
get the right output file names at the first render. I had to turn off
incrementing and manually name each clip before rendering. The vb scricpt
looks for these names, so I understand it is important. I can't figure out,
however, what the script is looking for in the preview folder and not
finding.
After spending almost two hours trying to troubleshoot the script, I gave
up. I can tell you tho that it takes about 6-7 minutes on my box to encode
all the videos.

The calendar icon on my iphone 6 shows that I have 2 items in my inbox but when I click on it it does not open the inbox but goes black for a second and then returns to iphone

The calendar icon on my iphone 6 shows that I have 2 items in my inbox but when I click on it it takes me to the full year calendar, at bottom of screen it says Inbox (2) - when i click on that the screen goes black for a second and then defaults back to the home screen. Have tried everything, rebooting, reinstalling, refreshing - very frustrating - can someone help?
Thanks

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

IPad first gen Calendar will not show month view for March. When you go feb to march the pad goes back to the home screen. Apr etc are all there. March seems to have some problem always going to the home screen. How can I fix this

I am haveing trouble with the calandar view on an iPad first gen. the month of March will not display , no matter how it is asked for the device drops out of calandar and defaults to the home screen. all other months display. Any fix suggestions welcome.

Try removing any all-day events from the calendar for the 1st April 2013 e.g. if you are syncing the calendar from somewhere else (e.g. Outlook on a PC or iCal/Calendar on a Mac) then change it to a timed event instead of all-day (if you don't sync your calendar from anywhere then try going into list view, go to 1st April and change any 'all day' events to times e.g. change Easter Monday to start at something like 4am) - it seems that there is a problem with all day events on that date which is when the clocks change due to daylight saving on the day before.

Multiclip angle goes black in viewer for certain clips

Similar Messages

Maybe you are looking for