Multiclip cuts don't work

Hi,
I am editing a 4 camera HD multiclip in Final cut 6.0.2. If I cut angles more that two or three times in one pass only the first edit point make the cut. The rest are left without the markers making the correct cuts.
Anyone else experience this? Solutions? This did not happen with 10.4. It means I have to go over and over my cuts. Not a pleasant experience.
David Perry

I tried it and it still does not work. However, I think I understand the problem. My cameras did not all have the same frame size or frame rates. In order to make them the same I rendered and exported the file so I could bring it into the multiclip timeline. I think this is wrong. So now I am using Compressor to change the frame rate and size on the 2 clips that need it. I bet that it will work then. I did try a new project with different files and they cut properly one I unchecked the scrub high quality in the RT column.
Thanks for your help

Similar Messages

Special character short cuts don't work anymore

I have no clue what happened, what I may have done, or if something was installed that made the change, but short cut keystrokes don't work anymore for creating special characters (e.g. "option - (dash) and option shift - (dash) to create an mdash and ndash respectively). I've tried restoring defaults under keyboard shortcuts (sys pref > keyboard) and have Full Keyboard Access set to all controls, but nothing's changed.
I've also scoured Google for the past half hour and have not been able to find anything. Any clues as to what's going on?

I also tried rechecking Unicode Hex Input and the keyboard shortcuts still worked. So it looks like you need to have U.S. Extended checked to support keyboard shortcuts for things like – (mdash) and — (ndash).
I don't think that should be necessary. Either US or US Extended should work fine on its own.
In system prefs/language & text/input sources, check the box for Show Input Menu in Finder. That way you will know for sure what keyboard is active via the "flag" menu at the top right. Accidentally switching to Unicode Hex (which can be done via a keyboard shortcut) will disable your Option key for special characters (which is why I asked you to make sure only US was checked).

Keyboard Short Cuts Don't Work

Hi, since I have had Windows 7 installed, my short cut keys don't work. For example: zoom in and out with ctrl/shift/spacebar, ctrl click an object twice to select the object below it; selecting an image and ctrl/shift dragging the corner doesn't scale the image, crtl / doesn't show or hide document grid, etc.
What can I do.
Barb

Hi,
IT created a new user account, unfortunately, it didn't work. Before changing to a new user account, the problems seem to be getting worse. When typing characters, I got all types of short cuts, drop down menus, etc instead of words. At one point, the arrow keys didn't work to move a object/photo. I couldn't crop a photo, scrolling my mouse up and down only moved the page side to side. Selection tool didn't work, or selected frame underneath. Selecting a page from a 4 page document doesn't take me to the page I selected, zooming in and zooming out works opposite each other.
When I was given a new user account, the issues started developing within 15 - 20 minutes.
Confused
Barb

Short cuts don't work anymore

Since the upgrade to 20 the short cuts (command +V or C or A or W or what ever) does not work anymore. I want the old version back. Short cuts are time saving. Where do i find the old version until this is fixed?
BTW: since the upgrade, in the morning when i start the browser I get a "oops" message telling me the browser had crashed.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

MacBook 10.5.8 keyboard short cuts don't work anymore

My MacBook 10.5.8 key board short cuts (specifically the copy and paste) no longer work. I already went into System Pref and restored the defaults, but that didn't work. How can I fix this issue?

I also tried rechecking Unicode Hex Input and the keyboard shortcuts still worked. So it looks like you need to have U.S. Extended checked to support keyboard shortcuts for things like – (mdash) and — (ndash).
I don't think that should be necessary. Either US or US Extended should work fine on its own.
In system prefs/language & text/input sources, check the box for Show Input Menu in Finder. That way you will know for sure what keyboard is active via the "flag" menu at the top right. Accidentally switching to Unicode Hex (which can be done via a keyboard shortcut) will disable your Option key for special characters (which is why I asked you to make sure only US was checked).

Since Aperture Update, certain keyboard short cuts don't work

I have a keyboard shortcut set-up for Curves Auto RGB which was working fine until the upgrade. Now, when I hit the key combo, it seems to be applying a Quick Fix Preset. Wrong!
I checked the assignment in my custom keyboard commands menu and it's correct. What's more, I don't have any key-combo set up for any Quick Fix Presets.
Not sure what's going on. If I try to create a different key combo for my curves shortcut, nothing seems to work. No matter what I try, it applies a Quick Fix Preset.
I wondered if anyone else was experiencing such a problem post-update.

Similar bug for me. My custom shortcuts for own presets are not working anymore:
http://discussions.apple.com/thread.jspa?threadID=2621108

Filters put on in final cut don't work in color

I put magic bullet color correction filters on my clips in fcp and I wanted to send them to color to tweak them a little but after I send them they revert to their original color. How do I make sure that the clips that I send to color keep the filters I put on them in fcp?

As Floridajo mentioned, the only filter that Color recognizes is the 3-way Color Corrector. And that only applies as a Primary In correction.
However, because of XML, when you return your rendered clips back to Final Cut Pro, the original filters will still be applied to your clips.
http://documentation.apple.com/en/color/usermanual/#chapter=2%26section=2

Indesign: shortcuts don't work

I installed an official version of Indesign 5.5. But my short cuts don't work. Things like ctrl-c, return, backspace don't work. I can't work like this!
I have an Acer laptop, Windows Vista
How can I fixed this problem?
Thanks

My computer is A Laptop: Acer Aspire 7720G
My system is Windows Vista Home Premium
http://www.folkinlimburg.be/images/indesign_shortcuts.jpg

InDesign copy, cut or move box functions don't work

I am having trouble with the copy, cut and move box commands. When a text or shape box is active, I cannot move it with the cursor. It will move if I use the arrow keys, but the box behaves like it were "locked." I deleted my preferences, but that makes no difference. This problem persists whether I am in an existing ID document, or if I start a new one.
The copy and cut functions don't work either.

Of course replacing your prefs is a possibility, and has nothing to do with the need to force quit (but will probably cure it). Replacing prefs is done with the application closed, either using the keyboard combination as you relaunch, or by deleting or renaming the specified files, both ow hich are desribed inthe link in the previous post.
You posted that you had already deleted the prefs, I believe, but many users are not aware they can use the keyboard or that there are two files involved for ID and are not successful, and thus think repacing the the prefs is not going to solve the problem. Hence my previous question. Did you use one of the methods in the link?

Screensets don't work in full screen?

Seems that Screensets don't work when Logic Pro is in full screen mode.... Whether using keyboard short cuts or going to the menu item. Anyone else having this issue?

Yep, Lion's full screen has a long way to go, at this point it's mostly useful for computers with one screen and simple apps with one window.

Interactive pages don't work on Skill soft LMS

Hi, We are working on a course using captivate 6 and some interactive pages are developed using flash and integrated in captivate. these interactivities work fine if we review it from any LMS or offline but our client has Skill soft LMS where these interactivities don't work. Any idea what could be the issue here?

Hi,
I have also created a captivate 6 course using flash interactive pages, there are many issues such as interactive screens not work, audio does not play well, it get cut off at the end on Skill soft LMS. Also the course completion in not getting recorded.
Has anyone here found any solution or any workaround to solve this issue.
Is there any other way to publish the files to support Skill soft?

Copy and paste short cut keys stopped working

Im not too sure when it happened, but "command C, command x and command V" don't work. I can highlight and go up to the menu bar, select copy, then select paste and it will work. I can't add a custom shortcut for copy, cut and paste. Any suggestions on how to fix this???

I've shut down and restarted my computer over and over. Whenever Im done using it. That obviously hasn't fixed the issue.
I'm sorry in regards for my "future posts" I don't see a spot to add my hardware. I'm working on a Macbook. Isn't that a notebook?

Will the new final cut pro x work with my Final cut pro version 6.0.6 data

will the new final cut pro x work with my Final cut pro version 6.0.6 data

Thanks Tom.
So I will need upgrade to FCP 7 first, then convert to an XML file in 6.0.6, then convert to another file that FCP X can read? I have a lot of half done projects that need finishing. Is this process very complex and time consuming?
Maybe I should be approaching this from a different angle. The reason I am asking is that I now need to upgrade to a new Mac book pro and have been told that I cant run final cut pro 6.0.6 on the new models using maverick. Is this true?
Roger

Every time I plug in my headphones into my Macbook Pro, my volume control buttons don't work.

Every time I plug in my headphones into my Macbook Pro, my volume control buttons don't work. Even after I unplug my headphones they don't work, they get stuck on the level of volume it was at when I plugged in the headphones. I can control the volume if I go to system preferences and do it that way, but that is such a pain. Also, in order to get the buttons to work again I have to completely restart my computer which is also a pain! What should I do, or can do, to fix the problem?

If you have have lion system, herebis a digital/analong output, youmcan a tooth/Qip with the the tip cut off you can you can stirrted s very gently to the input/put is a digital/along output devivce\\\\\\\\\\\\\
The dual input/digital input
a annaolg/digidal, an toothpick/Qtip with the cutit off gentely wiggle the the the input/put should then looen the the right the, should loosen the sticky switch to the lne.

Zoom tool short cuts won't work in CS2

When I use the keyboard short cuts to to zoom (ctrl ++ and ctrl -) they don't work. Any ideas why?
Thank you
Brad

Are you saying they don't work at all (do nothing) or that their actions are not what you expected? If the latter, that's not unexpected because there are just too many counteracting options provided for this feature and they are not commonly understood
You should get a zoom in/out with or without resizing the window, depending on (1)The status of the general preferences box "Zoom Resizes Window", (2)Whether the zoom tool itself or another tool is highlighted, (3)If the zoom tool, the status of the "Resize Window to Fit" box on the options bar, and (4)Whether you use CTRL alone or together with ALT, or together with ALT and the space bar.
The General Preferences setting involving the zoom tool is overridden by the zoom tool option bar setting when the zoom tool is activated, including when it is temporarily activated by holding the space bar down along with CTRL and ALT. In these cases you must also left click for each desired zoom step, and releasing the keys deactivates the zoom tool.
Unless the zoom tool is highlighted, the zoom tool options are not accessible (nor even visible), but their most recent settings apply for those shortcuts which use the spacebar.

Multiclip cuts don't work

Similar Messages

Maybe you are looking for