Multiclip editing does not update Canvas window with active angle

Hi,
I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
I'm now stuck! and would greatly appreciate some help.
Thanks
Phil

Welcome to the family.
I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
bogiesan

Similar Messages

Firefox 11 does not update its window in a remote control RealVNC session

When I am remote controlling a Windows XP 64bit PC with RealVNC, Firefox 11 does not update its window contecns. Old Firefox 3.6 works just fine. Is it called a redraw or drawing issue?

You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*about:config page: layers.offmainthreadcomposition.enabled = false
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Image does not update in loop with control

Hi all,
I am trying to make a data playback vi. I have some data recorded, and images recorded from another vi saved onto my computer.
I want to sync the data with the video, so we can tell what was happening visually when there is something interesting happening on the waveform etc
I successfully made a real-time playback of the data and video. The speed of the playback is selectable and works well. The image output is inside a while loop.
However, I would also like to make a different case where the time is selectable via a slider.
The setup for the video playback is almost identical. The only difference is that instead of the loop iteration output hooked up to the image array indexing, the output of the
front panel slider is hooked up.
However, this small changes is a big problem! The data in the wires updates as I slide the slider fine, but the image in the front panel does not.
If I scroll around the front panel the image WILL update, or if I zoom in or out etc. Any action except moving the slider updates the image.
This is somewhat confusing because the image updates with no front panel activity at all when using the iteration # output... why should the refresh care about getting
the indexing from one source or another?
I tried playing around with my display settings, like resolution, acceleration, color depth. I've also added wait times. I also tried to put in a flat case structure with the image
update first, then checking the slider value and shift registering that around the while loop.
It is probably something weird with Windows, but is there some way to 'trick' LabVIEW into a redraw?

Ah, I'm dumb.
So when you have a selectable case structure (lets say two cases) and an image out in each it creates two image out windows in the front panel!
The other image out was like 3 screens away for whatever reason, and THAT one was updating just fine.
Now to put the case structure inside the while loop instead of the other way around so I can just have one image out...

Hp split 13 X2 does not update to windows 8.1 how do I stop the auto update

My notebook runs with Windows 8.0 and functions well. Unfortunately the Windows OS want so to update to Windows 8.1 and my notebook does not accept the upgrade as it will not configure the change. Even though I have set the Windows update to require my approval before updates are initiated it continues to auto update to Windows 8.1. When the update fails my PC automatically reinstalls Windows 8.0 and I am back working again. This has happened 3X in the last 2 months and I am frustrated. Does anyone have any suggestion on how to stop this cycle?

Hi @PDaley,
Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that you are having an issue with updating your Windows 8 to 8.1. Although you have set the update to require your approval before installing the update, it does it automatically.
When the update fails it reverts back to Windows 8 and all is well.
Here is a link to HP PCs - Updating Windows 8 to 8.1 that may help.
You can also go to the Windows Compatibility Center that may also help to determine what is required for a successful upgrade.
This one from MIcrosoft may also help. Update to Windows 8.1 from Windows 8.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Technote upate: "Adobe Digital Editions does not install on Windows Vista" now v1.6

http://www.adobe.com/go/kb403051 has now been updated to contain the 1.6 version of Digital Editions.
Note that the instructions remain the same. Only the download is new.
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe

http://www.adobe.com/go/kb403051 has now been updated to contain the 1.6 version of Digital Editions.
Note that the instructions remain the same. Only the download is new.
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe

Latest version iTunes does not update in Windows XP SP3

I had no valuable diagnostic information, just try again. I went to Control Panel and removed the software. Now it does not finish with the installation. During the installation there was a failure because the Apple Mobile service could not start. Has XP SP3 support been removed?
Software is now removed so I will not receive notifications that this bug has been fixed. Please notifiy me via email when done.
Thank you.
TC

Were you looking for help or just venting?
If you want/need help, then help yourself. Provide some details about the specific issue(s) being experiencd.

Video does not fit canvas window

Hello All,
When I import a clip to the timeline, it shows in my canvas with a black border. How do I make this fit the window? I do not want a border around it when I play it on DVD. Please help!?!!??

You need to have Image+Wireframe ON to grab a drag point (little squares at each corner) to re-size to full screen.
Ensure the Viewer and Canvas are set to "Fit to Window" before starting.
Double click the small clip in the Timeline, it opens in the Viewer.
Place the playhead over the Timeline clip.
When you scale the clip in the Viewer you will see it update in the Canvas.
This way you see waht you will get straight away.
Al

UPdate download does not occur. Window shows activity, but nothing happens.

I get a notice that there is an update, but when I click okay to update all the window does is show that it is updating. However, nothing happens. There is no indication that it is corresponding with the server. I have downloaded the update, but it will not install.

If you have problems with updating then best is to download the full version and uninstall the currently installed version. 
You may need to remove the Firefox program folder to do a clean install of the new version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

APEX_ITEM.date_popup does not update proper row with column sorting on

I have the following example sql report query on a page:
select rownum rowno, object_name
, object_type
,APEX_ITEM.date_popup(43, null, created, 'DD-MON-RR',9) date_created
from user_objects
This works fine when I tried to update the date if no sorting is involved. If I allow sorting in APEX by clicking the column headings, the row numbers no longer match up with the the displayed rows. So in order words, if I had the following
Row MyCol Date
1 Z
2 B
3 K
If I enabled sorting and click the MyCol column heading, then the following would result:
Row MyCol Date
2 B
3 K
1 Z
If I then enter a date for the first displayed row, MyCol=B, then it will update the MyCol=K row because it goes by rownum and it thnks it is rownum=2 where MyCol=B.
This use to work by putting in a unique id column instead of null for the 2nd parameter to the API. The latest doc says that parameter is depracated and this no longer works. It seems to always go by rownum, and therefore won't work with sorting.
Any workaround or suggestions?
We need to have a query similar to above, with sorting enabled on a number of columns and then have a custom PL/SQL process called when the submit button is pressed. It would reference the date column as APEX_APPLICATION.G_F43(I) in this example.
It used to work. Has this functionality been removed?

rwessa,
Right now, there is no reasonable workaround for this immediate issue of using APEX_ITEM.DATE_POPUP in your query and sorting via PPR. The problem is that the generated JavaScript as part of APEX_ITEM.DATE_POPUP is generated at query execution time and then sorted by the reporting engine afterwards (via AJAX/Partial Page Refresh).
About the only workarounds I can suggest are to disable column-heading sorting for the SQL-based report. If you want sorting, implement sorting via a select list and then use a region type of PL/SQL function returning query, where you append the ORDER BY clause to the SELECT statement. You may also wish to investigate using regular reports (and changing the Display As of the column) or using tabular forms, which would not exhibit this behavior.
I hope this helps.
Joel

Battery Update 1.4 does not update my battery with firmware version: 102a

Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
A quick Google search showed that plenty of other people are asking on the web about this version 102a firmware as well.
So, any idea what the deal is with batteries that have the firmware version 102a? I got this current battery under the recall program as the original one that came with my MacBook was one of the bad ones.
This whole MacBook battery business has been a nightmare. It's wasted hours of my time, and is a real black eye on what is otherwise a good computer experience.
Thanks in advance for any input.

Macophile wrote:
Hello,
I was happy to see this update come out recently as my battery does lose power when the computer is powered down but I wanted to fully research it first because there's no going back with these firmware updates.
From Apple's page about this 1.4 update:
Batteries with this information in the Battery Information section [of Apple System Profiler] need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110
Everything on my system matches except my battery firmware is version: 102a
Figuring that 102a was a lower firmware version than 0110 I went ahead and installed the update but I don't think my battery has been updated. I got no notice that it was being updated as others, on other forums, have described seeing and nothing in Apple System Profiler has changed.
I started thinking about it, and 102a is actually a larger number than 0110.
In any case, the updater was only meant for specific battery revisions.

Manual sync to ITunes does not update music

I have a generation 3 (I think--it looks like the model number is A1318) IPOD Touch running version 4.1 operating system. I have ITunes version 12.0.1.26.
It does not automatically sync. When I select manual sync, it appears to go through the process and indicates that it has completed the sync, but nothing has changed. It does not update the IPOD with new songs from my library.
Any help would be appreciated. For example are thees operating systems compatible? If they are what am I doing wrong.
Thanks
Ron

Try backing up to iTunes and restore from backup
iOS: Back up and restore your iOS device with iCloud or iTunes
Note that ll the synced media like apps and music have to be on the computer since they are not included in the backup

Time stamp does not update automatically

Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
How can I solve this? Thanks a lot in advance.

What does this have to do with NI counter/timer hardware?
What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

My ipod does not apprear in itunes with windows 7

my ipod does not apprear in itunes with windows 7 any ideas

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4. Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
7. Check for third-party software conflicts.

Book editing - change a photo, book does not update

We are having a small problem. When editing our book, we double on some photos to edit them. Crop, color adjust, etc. Then we click done, and get sent back to our Book page.
Now about half the time the book preview does not update the image that we just changed. It seems to update the larger full page images more often than it updates the smaller images in the book layout. If I double click the photo again, I can see the change I previously made are still there, but they are not being reflected in the book preview.
So 2 questions, how do I force the book to update its photo preview? And if I print this will it use the edited photo, and not the version its showing me in the preview?
Assume this is just a screen display issue, and that the generated print will use the right assets, right?
This is in iLife '08 on Leopard on an intel Macbook.

Squeegy:
Welcome to the Apple Discussions. Try changing the layout, i.e. from frames with or without text to the other and then back. That may jump start the picture to display properly. It works for me when I do some cropping, like from landscape to portrait and the frame doesn't reset itself.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

"Arrange new window" (thumbnail window for digital painting) does not update

Hi,
I have an issue with Photoshop CC V2014.2.1 release where if I open a new document, then create a duplicate window of that document (Window->Arrange->New window for "Document.psd") if I am working on the original window, the duplicate window does not update any brush strokes until I select the duplicate window or perform an undo command.
On previous versions (CS4 & CS5) the 2nd window would update each brush stroke automatically.
I have looked for options to auto-update the 2nd window, but can't find anything. Is this a bug or am I missing an option?
Thanks,
Tim

Well there is feedback http://www.apple.com/feedback/itunesapp.html and if you have an AppleID there is a "bug reporter" http://bugreporter.apple.com/.

Multiclip editing does not update Canvas window with active angle

Similar Messages

Maybe you are looking for