Multiclip editing error message 'video frames don't match'

I basically need help figuring out how to make these video frames work together. Also, what is the easiest/quickest way without loosing quality. (I have a ton of clips to get through)
1st image is settings for the camera I'm trying to match everything to. 2nd image is the camera with the wrong settings. I've tried a few different things using the export to quicktime function as well as compressor but I must be doing something wrong.
Thanks in advance!

Just ran into the same issue...how did you solve it?
Thanks!

Similar Messages

  • Why do I always have "Insufficent Content for Edit" error message ?

    Hi all FCE experts,
    May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
    Ok,this is what happen:
    I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
    After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
    I then tried Replace also got the "Insufficent Content for Edit" error message.
    I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
    Any ideas ?
    Thanks

    Tom Wolsky wrote:
    From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
    Thanks Tom, you are correct.
    I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
    But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
    Thanks

  • Playing mp4 audio gives error message "Video can't be played because the file is corrupt"

    Playing a particular mp4 audio file directly from a website link gives error message "Video can't be played because the file is corrupt". However other mp4 audio files from this same website do work correctly. What can I do to get all the the mp4 audio files to play directly from the same website? I must have the correct plugins, etc. since the other files play. This file is not playing from YouTube, is it on the website.
    Thank you for your help.

    What is the link to the site and file in question?
    MP4 files should be handled by Firefox itself, not a plug-in.
    # Click the ≡ Menu Button and choose Add-ons.
    # Click Plugins.
    # Set every plug-in to "Never Activate".
    # Try loading the file again. Is there any difference?
    You have two versions of Flash Player installed. Perform a clean installation of Flash Player as follows.
    # From the following page, save the uninstaller somewhere handy, like the desktop.
    #* [http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html#main_Download_the_Adobe_Flash_Player_uninstaller Uninstall Flash Player for Windows | Adobe Support]
    # From the following page, save the installer for other browsers. If you also use Flash Player in Internet Explorer, also save the ActiveX version.
    #* [http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#main-pars_text_4 Direct downloads of Flash Player for Windows | Adobe Support]
    # Exit all applications.
    # Run the uninstaller.
    # In Windows Explorer, try to open the following folders. If they still exist, delete them manually.
    #* <pre>C:\Windows\system32\Macromed\Flash\</pre>
    #* <pre>C:\Windows\SysWOW64\Macromed\Flash\</pre>
    #* <pre>%AppData%\Adobe\Flash Player\</pre>
    #* <pre>%AppData%\Macromedia\Flash Player\</pre>
    # Restart your computer.
    # Run the installer for other browsers.
    # Run the ActiveX installer if you downloaded it.

  • CineXplayer on my iPad (2) error message stating I don't have permission to copy files from my hp pavilion 6 across to my iPad. I think I may have accidentally disabled iTunes Helper, but it is running in TM.

    I use CineXplayer on my iPad (2) and today have started getting an error message stating I don't have permission to copy files from my hp pavilion 6 across to my iPad. I think I may have accidentally disabled iTunes Helper, but it is running in Task Manager.
    I have removed iTunes and re installed.

    That's a comment in the file. It has no effect at all.

  • I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account.  On my ipad it logs into my original email account and I see no where to log into another email account.  If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to.  It did not send to back up email account either.
    Can I log into 2 email accounts on my ipad where it says mail at bottom?
    Can I have 2 apple ids?
    If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
    (won't let me)
    If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it.

  • I am not able to open your answer for some reason my computer is not opening it in Explorer, it's not responding and I keep getting error messages and I don't know how to open it in another browser when Explorer experiencing issues. Heather

    I am not able to open your answer for some reason my computer is not opening it in Explorer, it’s not responding and I keep getting error messages and I don’t know how to open it in another browser when Explorer experiencing issues.
    Heather

    If you  have IE version 10 go to TOOLS and change the option to use Compatibility View

  • Invalid Edit Error Message

    Hey guys, i was using final cut pro 4 to edit a movie for our film fest, and out of nowhere, the program is not letting us drag any clips into the timeline, it pops up with a message saying invalid edit. I tried to see if there was anything in the sequence options menu to help out but it crashed everytime i tried to open the options. I updated to FC HD and updated Pro App support, the program now works and i can get into the options menu, but i still get the Invalid Edit error message whenever i try to add a clip to the timeline, im going insane. please help

    Hey guys, bit of an update, i am not able to bring any clips into the time line unless i go in and set an in point and an out point for each clip manually before i bring them down. It didnt always used to be like this so if anyone knows how to turn off the setting or otherwise fix what may cause this to happen please let me know.

  • New project to DVD works fine, but sharing to a Blu ray fails, with a error message "video rendering error 60."  What is that and how do I fix it?

    getting an error message "video rendering error 60" when burning a new final cut pro project to Blu ray.  Burning to regular DVD works fine.  I have burned many other projects successfully to blu ray.  What is this message and how do I fix it?

    If this same timeline can be exported to other file formats and can be shared successfully to DVD, possibly it's the longer render time in the Blu Ray processing that is the problem. In the Finder in Applications, right click Final Cut Pro dot app, choose Get Info and verify that Prevent App Nap is checked. If it isn't, check it and try again.
    Russ

  • I can't sync my iPad to the iTunes it's give me an unknown error  message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

    I can't sync my iPad to the iTunes it's give me an unknown error  message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

    Unknown Error containing "0xE" when restoring
    To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
    From Here  >  http://support.apple.com/kb/TS3694

  • I'm trying to rip a CD to iTunes and am getting an error message that I don't have privleges to make changes to the songs.  Suggestions on how to fix?

    I'm trying to rip a CD to iTunes and am getting an error message that I don't have privileges to make changes to the song.  Suggestions on how to fix the problem?

    Hey mprangle,
    Thanks for the question. The following resources may help to resolve your issue:
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/TS1387
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks,
    Matt M.

  • I am having difficulty downloading an app.  I have enough credit on my account to cover the cost but I am receiving an error message that I don't.  Any suggestions?

    I am having difficulty downloading an app.  I have enough credit on my account to cover the cost but I am receiving an error message that I don't.  Any suggestions?

    In determining whether you have enough, did you include the sales tax on the app?

  • HT4623 I just updated my iPad 3 but myI just updated my iPad 3 but myiPhone 5 keep giving me a error message.  I don't have permission to access the requested resource, from iPhone and via my Apple Mac??????

    I just updated my iPad 3 but myI just updated my iPad 3 but myiPhone 5 keep giving me a error message.  I don't have permission to access the requested resource, from iPhone and via my Apple Mac??????

    If you think this is a bug, you can report it here:
    Apple - Mac OS X - Feedback

  • I am trying to update my bank information in iTunes and I keep getting an error message stating it doesn't match my bank information. I also have 9 pending charges from iTunes. Please help

    I am trying to update my bank information in iTunes and I keep getting an error message stating it doesn't match my bank information. I also have 9 pending charges from iTunes. Please help

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HELP - Error message that I don't understand

    When trying to burn an iMovie project to DVD through IDVD I get this error message about 5 minutes in to the process every time:
    Error during rendering/encoding
    There was an error during rendering/encoding of the menu/slideshows. The burning process has been cancelled.
    I am a novice user & trying to make a DVD for all of my family back in the UK to send for Xmas - so URGENT now!!!
    Can anyone advise what I'm doing wrong?
    I have checked the disk tree and there aren't any errors showing up there as red crosses or black/yellow warning tape signs.
    The DVD set up is very basic - no menus or extras - just an iMovie project that I exported from iMovie OK. I have been able to do a version for iTunes so I just don't get why this won't work and the error message is super unhelpful.

    Hi JaneyHammond
    Welcome to apple discussions. There's an old saying, "The faster I go, the behinder I get". This may apply here because I can tell you from experience that One Step and Magic Dvd are not any faster at capturing / encoding video to dvd-r than creating a dvd via the traditional approach. I don't recommend One step or Magic as a beginner.
    Suggestion only: If you're a novice, then please create a typical iDvd project via Create an iDvd Project / apple's web site / iDvd tutorials (as opposed to a OneStep or Magic Dvd). Learn the basics first in order to make a standard dvd and then mess with the other approaches. Not the other way around.
    http://support.apple.com/kb/TA27570
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6770.html
    http://support.apple.com/kb/HT1583?viewlocale=en_US
    http://support.apple.com/kb/TS2178
    http://www.apple.com/ilife/tutorials/#idvd-burn
    http://www.apple.com/ilife/tutorials/idvd/tutoriallist.html
    Hope this helps but if not just come on back.
    Message was edited by: SDMacuser

  • ITunes error message - "video format is not supported by the iPad" My video is mp4, mpeg-4.

    When syncing my iPad 2....  Why do I get this iTunes error message? "video format is not supported by the iPad"
    My video is mp4, another is mpeg-4.
    I thought the iPad 2 could play almost any format.

    Must conform to these specs:
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Or download an alternate video player,such as avplayerhd.

Maybe you are looking for

  • DBXML database requires recovery often

    I am running a dbxml database (2.4.13, DB: 4.7.25) with transactions. There are not many calls to the database daily (<200 on average), however it keeps exiting with an exception requesting that recovery be run: Db Error: PANIC: DB_RUNRECOVERY: Fatal

  • SQL Plan Management (11.2.0.1)

    Hi Guys, I'm doing some testing as below. I tried to keep the SQL plan in baseline. (when the table has no index, as such performing full scan) However, after i create the index. It's not picking the original plan which i put it in baseline. It's usi

  • Translation of field name at the selection screen

    Hi, I need to translate one field at the selection srcreen. Now apperas only technical name of that field. I tried in Se63, se38, se41, se80

  • ORA-1438 error -

    Hi Have following situation. A materialized view has been created and column has following datatype number Not sure why not got definition of underlying table NUMBER(13,6) However, main problem is trying to update column of a table whose definition i

  • Query - How these works differently???

    which is better??..and is there any difference in the execution steps?? ..etc ..please specify to me.. select a.col2,b.col2 from tab1 a,tab2 b where a.col1=b.col1;or SQL Standard Query select a.col2,b.col2 from tab1 a inner join tab2 b on a.col1=b.co