Multiclip edits not "sticking"

Since upgrading to 7.0 it seems to be acting weird.
I sync my clips, create multiclip, drag to timeline, etc.
I play back, while doing real-time switches with my number keys. As I do them, little markers appear above the timeline, showing where they happen.
BUT as soon as I stop playback, they disappear and no automated switches are left. Why are they not being recorded?

I was curious myself, so I looked it up in the Manual.pdf on page 646 it states:
Switching and Cutting Between Angles
When you work with multiclips in Final Cut Pro, switching and cutting have distinct meanings:
• Switching: This means changing the active angle of a multiclip without creating a cut. You can switch the active angle of a multiclip in the Viewer or the Timeline.
• Cutting: Like switching, cutting changes the active angle of a multiclip, but an edit is added to the multiclip at the moment you change the active angle. You can see the results of cutting in the Timeline. When you cut from one angle to another, the result is two multiclips in the Timeline: one before the cut point and one after.
Now, maybe somebody can explain why one would want to set there and switch camera angles throughout the entire clip and not want them to be permanent, (I'm sure there is a logical reason for that, I've just never had a need for it I guess) but in anyway case, that's how it's suppose to work apparently.

Similar Messages

  • Multiclip editing not cutting, Markers dissappear when stop playing

    Im doing a multiclip edit for the first time and im having issues!
    I have the 3 angles i need set up and sync in a multiclip and can get it playing fine ie viewer has the 3 angles playing at once and select angle is showing in the canvas. I play the clip and begin to add cut points (by clicking on angle when i want to change to it) a marker appears in the timeline as it should but when i stop playing all the markers disappear and im back to square-one again!!!!
    As far as i can tell the setting are correct, i have the viewer set to open and multiclip playback enabled and all looks great it just wont insert the cut points!!!
    PLEASE HELP!

    I'm no longer using 5.x, but I remember some odd bug with multiclips doing only a Switch to (instead of a Cut to) which results in the behavior you're mentioning: the markers disappearing as soon as you stop playback. I believe the issue was either related to being in a customized, but unsaved custom keyboard layout.
    I guess what I'm saying is: does going to Tools > Keyboard Layout and selecting either layout (Default or Multiclip) affect the issue?

  • IPhoto edits not sticking.

    Hello,
    I am using iPhoto '08 and for my photo editing, under preferences I set that I want to use Photoshop CS3 to edit my photos. So I am in iPhoto and select a RAW that I want to edit and apply the changes. I have tried everything from saving as a different file to saving in the same location but my photo will not hold the changes. Any suggestions?

    Check the iPhoto help on RAW, it’s very clear.
    You cannot edit a RAW file. When you adjust a RAW photo in Photoshop (or any external editor) that must be saved as a new file = JPEG, tiff whatever - and then imported to iPhoto as a new file.
    So save to the desktop and import.
    Regards
    TD

  • Multiclip editing does not update Canvas window with active angle

    Hi,
    I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
    I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
    I'm now stuck! and would greatly appreciate some help.
    Thanks
    Phil

    Welcome to the family.
    I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
    You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
    bogiesan

  • Can I edit multiclips, but NOT in real time?

    I love multiclip editing, but right now I've got 5 angles that were shot without a director calling the shots, so any given edit can require some real decision-making. I often must choose between the lesser of 5 evils, so-to-speak, and I can't really do that in real time.
    Is the multiclip function "pause-able?" Can I edit on the fly for a few cuts, pause the process to scrub around for a minute and make a edit decision, and then continue in real time?
    Thanks for any insights!

    Yes.
    If you simply need cutaway shots...
    I'll usually set up my multiclip on V1, the activate the V2 track for 'cut-ins'.
    I can easily place the playhead over an 'active angle' of the camera I want to utilize, then hit the 'f' key. This will 'find' that point on the original clip, from which I can quickly scrub back and forth to find what I want and drop it on V2.
    I've set up a 'quick-key' for the Gang/Open on my '/' key, so I can just hit that after dropping the shot on V2, which gets me back to multiclip functionality.
    Once the edit is locked, collapse V1, then select all shots on V2 and shift-drag them down to V1.
    Not sure that's what you're looking for exactly, but it works for me. BTW, I make it a habit to only cut a few shots, then stopping, then carrying on. This way you don't lose shots that you like when the 'cuts' are set.
    K

  • Multiclip editing - what to do if one camera is not continuous synch?

    Help!
    I've got to edit a one hour show overnight. Two cameras. One camera is shooting continuous, only one stop to change tape. The second camera was stopping and starting all the way through. I synched up the clips of the start\stop camera all the way through on track two. Synched in camera one where it starts up after a tape change. So I have a timeline with the whole show, made up of two tracks of clips. Is there any way I can use the 'multiclip' editing function AFTER I've synched up the two cameras?
    The only thing I can think of quickly is to export the two cameras one at a time from the edited timeline, in the same format, and create new contiguous single clips for each all the way through. Then import these new one hour clips to do multi clip editing (all the blanks filled with black slugs). I'd like to avoid all that render time. And a second generation Quicktime.
    Any suggestions would be most appreciated,
    Ben

    I agree that the ol' split screen effect is a good way to edit multiple cameras, if you only have two cameras, it's still a bit of a waste of time. If there are only two shots from which to choose, it's a binary selection. In the olden days, I'd simply turn off the camera 2 track and razor blade out and delete all useless footage from camera 1. The holes MUST be filled by camera 2. Where there are overlapping shots, it should be easy to choose the better.
    Your three camera shoot could benefit from two things:
    1. A tailboard meeting where you explain why you expect each tape to roll continuously
    2. Communication via walkietalkie or wireless intercom (rent them)
    3. A big digital clock with seconds hung on a wall where all cameras can see it. If any camera gets stopped (it happens) or batteries die, they can shoot the clock for ten seconds to provide accurate sync..
    bogiesan

  • How can I use ALL audio tracks in multiclip editing?

    I want to be able to use all audio tracks after the multiclip cut.
    It's only a two camera shoot, but I want to be able to use the ambient room sound from the second camera ... and control its level (in relation to the master audio track on the first camera) AFTER the cuts are made.
    Is this possible in multiclip editing? And how does one go about it?
    Apologies. I've spent an hour or so in the manual, and it isn't clear ... or I'm just not finding the right reference.
    All ears,
    Ben

    Sorry if I'm steering you down a path you don't want to go or even if there's a better way but I wouldn't be ding complex audio mixing anywhere near the multiclip interface. Export your reference movie or nest the multiclip project into another sequence, bring in your additional tracks, get to work. Just my preferences, I put a bunch of rough keyframes in the audio tracks and enter some markers (and make a lot of paper notes). Then I go back using the large mixer window to do the fine tweaking.
    Stick around for a couple of days, some other multiclip users with more experience than I will offer some more useful suggestions.
    bogiesan

  • Help with multiclip editing in FCP

    Can someone please help me with multiclip editing. I have followed all the steps in the tutorials I have watched but I am unalble to switch between the two angles in the time line. Also the red line in the time line is telling me to render everything first . Is that normal or is it because I am using the 5.0 version of FCP?

    To switch between angles, the timeline should not be rendered. Once you render it, it may play more smoothly, but you can't switch.
    Also, sometimes you may have trouble switching many HD files, so it might work better to use Media Manager to make lower resolution proxies for your editing, then bringing the full-res files back for your final output. If the computer can't handle the load, it may refuse to do multiclip editing.
    Finally, you may need to switch Playhead Sync back to "Open" from time to time. For some reason, the Viewer sometimes switches to "Sync Off".
    By the way, your question actually belongs on the Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io

  • Multiclip Edits Problematic with EDL's (Edit Decision Lists)

    Gentlemen, I exported a sample EDL for my on line bay from a multiclip edit from three angles (P2 Card Files) I created and they are seeing the list as one Reel Name instead of the three reel names if I cut it traditionally.
    I understand a multiclip is creating a new single clip in my bin of the three source clips, and that it is creating its own new name. But is there not a way for the EDL to be created and exported so that the edit list reflects the original file source names, not the single multiclip name?
    I also tried collapsing the multiclip but got the same EDL result.
    Thanks for your input.

    Might try performing a match frame/replace routine in your sequence after collapsing the multiclips? i.e, replace the clips in the sequence with the original master clips... This would go pretty fast I'd think. Just place the playhead anywhere within a clip, type f, and then simply use the replace edit on each one.
    Try it with a duplicate of the original sequence...
    Jerry
    Message was edited by: Jerry Hofmann

  • How compress 3 DV tape inputs for multiclip editing, assemble final program

    I have 3 timecoded 95 minute DV tapes of a concert I want to input to FCP for editing in multiclip. This is my first time.
    What's a good how-to reference to 1) compress the content to fit my 250 Gig hard drive, 2)edit in multiclip, and 3) assemble the finished program by importing the uncompressed clips I end up using?
    Thanks very much. Duncan
    Mac G4 Mac OS X (10.4.8) 2 250G HDs, 2 500G HDs

    Here's a tutorial, plus info in your manual...
    http://www.kenstone.net/fcphomepage/multicam_editingmartin.html
    Is your media simply MiniDV, or another format recorded on DV tape?
    If MiniDV, it should all fit easily on your harddrive (provided it is a drive other than your system drive). DV-NTSC takes about 13Gb/hr of footage, so you're well under.
    Do not render until after you've finished your multiclip edit and 'collapsed' the multiclip.
    K

  • Subclip timecode issues for MultiClip edit...Help!?!?

    Here is the issue. 2 camera shoot, Cameraman 1 pushed pause during a live concert video shoot.
    In order to make a multiclip edit with the other camera's footage, I have made subclips of this camera's footage on each side of the pause.
    The other camera in the shoot had issues as well so I have been forced to use a sequence and alternant timecodes to line everything up with my sound file.
    Everything works well until I get to the subclip after the pause. I try to modify the alternant timecode to correspond with the sequence timecode but when I enter the approporate number FCP forces a different number to appear.
    My hunch is that because these are subclips of the same captured clip I am not able to modify the timecode as I want to. Can anyone confirm this hunch?
    And...what can I do about this? Do I have to recapture? I hope not. I have tried to create a new master clip in the modify window but the problem persists. I am so close to getting this into the multicam editor I can taste it. Thanks.

    Solved it... I ended up having to re-capture the shot after the pause so it would be a seperate media file. I guess I could have copied the file outside of FCP, renamed and imported the file seperatly... I realize this problem was caused by not setting the capture up properly to treat the jump in time code appropriately.

  • Adobe customization settings not "sticking"

    Hi
    We are using ProSystem's PDFlyer program. Acrobat settings does not "stick" within the program. We tested adding other toolbar elements to quick tools, and changing Acrobat Preferences in the Edit
    > Preferences menu, and none of the customizations we made were still active the next time we re-opened Acrobat.
    Other customizations within the PDFlyer program work just fine.
    Thanks in advance!

    Hello community,
    it's amazing that the longstanding problem seems to stay down to the present day and neither Adobe nor admins found a solution for that. :-(
    My plain intention was to enable enhanced security, preconfigure trust and lock down all settings. The best way would be to create a patched and transformed msi package of Adobe Reader 9 which can be deployed by Windows group policys. After applying the msp to the msi file I opened the msi in Adobe Customization Wizard 9 and made the desired modifications, in particular by adding a recursive folder in Privileged Locations Exempt. The test setup ran without any problems. To verify the modifications in Reader I checked it under "Edit / Preferences / Security (Enhanced)" and wondered why the exempt list still was empty.
    In the Adobe "Enhanced Security and Trusted Locations" Guide there is specified where the enhanced security settings are stored in Windows Registry. At least the Privileged Locations Exempt entries should be stored in HKCU. I checked this up in registry of my test installation and found these entries in HKLM instead. So it seems that Adobe Reader would ignore these entries and it is expected that all settings are stored in HKCU indeed. But in that case the settings are only recognized if the user's interface is not locked down.
    So my questions are: Did anybody managed it? How is it possible keep preconfigured settings and lock down user's interface of Enhanced Security Settings at the same time? Is it better to avoid using Customization Wizard and deploy the settings via reg files instead?
    Any responses would be appreciated.
    Christian

  • Mac Pro 8-core too slow for Multiclip editing

    I have a Mac Pro 8core (pre-Nehalem), with 4 gb of memory. I'm doing some multiclip editing,and even with RT set to the lowest preview quality, my system stills blocks from time to time. I don't want to invest in a RAID-system, because I don't do multiclip editing that often. Is there an other - not expensive - way to speed up my Mac? Would adding memory - say to 6 gb - help?
    I also have the impression that since I upgraded to Leopard Snow, the computer is much less stable. FCP shut down twice unexpectedly yesterday.

    You don't say what format of HD you're editing but the fluidity of playing multiclip sequences is really dependent on the system's ability to provide all the streams of video in a timely manner. This means hard drive throughput is essential. A good quality sata drive in a MacPro can read somewhere around 115 MB/sec when empty. It will spool material less effectively as it fills.
    Very good quality esata RAID systems can provide 5x that - which is why people utilize them. (fwiw-I've run 16 streams of 720p24 DVCProHD off of a Caldigit HDOne in a multiclip sequence without a hiccup. )
    What can you do if you don't want to pay the price for the right gear for the job?
    1. populate all your internal bays with fast hard drives
    2. empty the drives
    3. spread your captured files across all three (non system drives)
    This will distribute the load as much as possible without going to a RAID setup.
    Once you have all the drives empty, you could try setting up a RAID 0 set using Disk Utility and see if that works for you. One caveat - if you decide to go the internal software RAID 0 route, recognize there is no failsafe should you encounter a serious system crash. Everything on all drives that are part of the RAID set can be compromised.
    Good luck,
    x

  • Multiclip editing

    Hi there,
    I'm reading the manual and thought I'd try multiclip editing..seeing as I have two camera's...not too hard I guess..but it's worth investigating.
    So..I've got the two camera's lined up on the timeline with the in-points clearly marked and inline with each other...but when I go to "modify" - "Make multiclip", it's greyed out and I can't highlight.
    This is probably reaaaaaaally simple....but I can't see how to do initially create the multiclip..arrrrgh.
    Hope you can help.
    Carol Ann

    This is probably reaaaaaaally simple
    Hiya Carol Ann, if that's your REAL name,
    Multiclip is not easy at all. It's a lot of fun but try not to get too worked up when something doesn't work for you. Apple's implementation is much weirder than other NLEs and the interface blows. Suggest you practice on a few short clips, about two minutes, so you can learn how the blue and green borders work and which to use: cut or switch? Trying to get things to work in the timeline, in the viewer and on your external monitor is a challenge the first few times.
    Suggest you load the multiclip keyboard or the multiclip button bar.
    bogiesan

  • Troubles multiclip editing in FCP 7

    I am running FCP 7 on a quad mac pro...with stripped raid internal hard drives ...when I go to "multiclip" ntsc 720 x 480 footage 3 streams...I get a "drop frame warning" and when I uncheck the box do not warn again...it allows multiclip editing to work but with NO AUDIO PLAYBACK.
    I have been doing this type of multiclip editing for years in FCP 6 on my older power Mac with no problems. So I tried the same footage on my power mac fcp 6 and it works.
    How do I get FCP 7 to stop shutting of the audio during multiclip editing?

    Make sure that you are playing the sequence, not the viewer. If your audio is not linked to the video clips anymore and you play the viewer, you will not hear the audio.

Maybe you are looking for