MULTICLIP HELP NEEDED VIA iCHAT

I have read topics about it online, and I have read the proper sections of the manual 900 times. I just can't get it all to work.
I need one kind soul to chat with me on iChat, and help me to get a simple multiclip working in FCP.
my screen name is: megahurtdotnet
I would really really appreciate this!

Joseph. It's really quite simple to do multiclips. If I had the time, I could probably walk you though it, but there might be a much simpler way.
1. Contact Steve Martin at Ripple Training. Rippletraining.com
2. Go to Ken Stones web site and post there. Kenstone.net (then go to discussions)
The basics are: Choose the in points of each of your clips. With those clips highlighted, right click and choose Make Mulitclip. A window appears showing you the clips and their IN or Out points. Click OK. Now you'll see a new file in your browser called Multiclip plus the name of the clip. Double click on this.
It will now appear in your Viewer. Hold down the OPT key and drag the clip (that are in the viewer) down to the timeline. Now, Highlight your mulitclip and hit the Return key (Not Your Mouse!) It again goes up in the viewer.
Now, you will see 3 buttons on the top of your Viewer Tab. The one on the left shows the size of the Viewer Image. The one in the middle is what you need to left click on. You will have three choices. Sync Off, Open or Gang.
You need to select Open.
Now you're ready to edit. One final step I forgot to tell you about. Before you choose your various clips (cameras) be sure to go to the ANGLE column in your browser and drag it to the beginning of your browser. Now enter the number 1 for your main clip, 2 for camera two, 3 for camera Three, etc...
Now when you move from camera to camera, you can use the number tabs instead of having to use the mouse.
There is really alot more to all of this, but hopefully this will get you started.
Contact Ripple Training. I think Steve has a Tutorial on this. He's great!
take care,
eric

Similar Messages

Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

Hi there
I'll pass your details to our Russian team and they'll contact you to assist further.
Kind regards
Bev

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

EDI IDOC generation for interface with Vendor software help needed.

EDI IDOC help needed.
We are NOT an EDI shop, but have a project to output data to Sales Force.com
Sales Force requests IDOC output - eg. 810 Outbound Invoice.
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments?
I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Basicall we have a report program that the user enteres in the date range of Order/Quotes/Invoices they wish to extract, the the program needs to output a flat file (.txt) on the server which is then picked up by Sales Force.com.
Also, is there a way to have in the Partner Profile a generic Partner under the "Type KU" that can be used for all orders/invoices so I don't have to create a KU Partner Type for each and every Sold-To customer we have?
I am very new to EDI so any help would be greatly appreciated.
Thanks.
Scott.

Hi Scott,
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
I know it's very tempting to use an interface for such loads if you anyhow have to create one. However, often the volume alone speaks against interface usage for such scenarios.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments? I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Well, the E2* segments basically reflect the external name of the IDoc segment, whereas the function modules you're referring to basically just create an internal version of the IDoc. Once the IDoc framework then passes the IDocs to the partner, the segment names usually (depends on how the IDocs are passed on) get converted to their external name. If there are multiple versions of a segment, then the version number will be appended to the segment name.
Note that IDoc segment definitions are only partially stored in the data dictionary. If you want to see all versions you should always use transaction WE31 to look at segments. There you can also see for example for E1EDK01 the several versions and when you then use in SE37 function module SEGMENT_EXTERNAL_NAME_GET you will see what SAP produces as the external name for segment E1EDK01. This function module is basically the one that handles the segment name translations.
Ignore the comments for subsystem, this is basically an option in SAP to possibly trigger further external tools (e.g. mapping etc.) for handling the outbound IDocs.
Again, the funny thing is that via the WE30 transaction, if i put in INVOIC02 as the Obj. name and see the segments, i can see that E2EDK01 there is a version 005, but if i go to SE11 and put in E2EDK01005 structure line and i get a "not found". We just have up to E2EDK01002.
In the old days SAP used to generate E1, E2 and E3* structures in the data dictionary (SE11). The E1* structure reflected the character type representation of an IDoc segment, whereas the other two (definition and documentation) contained actual references to data elements (e.g. if you used a quantity field). However, in newer releases those dictionary structures (E2* & E3*) are no longer generated, because they're superfluous (meta data defined via WE31 is sufficient).
Cheers, harald

Help need to switch Muse site to BC on a allready hosted plan

Hi, i also posted on BC forum...
I have a client that was in a hurry to have his emails accounts before the entire website.
So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
The site would be just a small 7-10 pages not to complicated.
Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
He approved the design, yay!
At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
so i told him i would have to remake "template".
I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
Now, i created a new temporary site using one of the new responsive template available.
How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
cant i just delete everything in the root folder, and upload the entire new site via ftp?
please help me find the solution. i am a bit in a panic here
hope you could understand my lousy English.
Sincerely,
i.d.

This would need to be transparent for m'y client...
Y
Envoyé de mon iPhone
Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
Re: help need to switch Muse site to BC on a allready hosted plan
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Thanks for additional details.
Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Garg

rohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.

Help needed with BBDM 5.0.1 IP Modem

Hi I was happily connecting thru the Net via the IP Modem in BBDM ver 5.0.1 all this while. Only this happened yesterday. Accidentally during the connection, my 9500 was disconnected from the USB cable. From that moment on, I cannot access the Net using the IP Modem feature. Tried to reboot the laptop as well as the 9500 but now all I get is the connecting message and then a pop up saying there is a hardware failure in the connecting device (or modem) ie the BB 9500.
I even uninstalled BBDM 5.0.1 and reinstalled ver 5.0 and also updated back to 5.0.1 - same story. I can still access the Net via the BB browser etc
Advise please thanks in advance

I have the disc and re-installed a couple of time. No positive result. PSE 09 which I bought thereafter is giving a lot of problems also!!!
Date: Wed, 8 Jun 2011 10:31:24 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with Elements 5.0
Doesn't really help either of us very much but I'm also having the same problem with Elements 5. I downloaded the program so I don't have disks to reinstall. And it seems from the other reply that Adobe has given up with the "old program," which incidentally was working fine until two days ago. Maybe I'll have to think about PSE9!
>

"Rend Error" when sending image via iChat/AIM

On my brand new iMac aluminum, I am unable to send, and friends are unable to send, images via iChat AIM 3.1.8 (V445). When either of us try to send, we get the message "An undefined AIM error has occured. The server message was: Rend: Error"
I then spin around and use my old G4 iMac to send an image - no problem. My buddy is also able to send to me, no problem.
Both computers are connected to the same Linksys WRT54G router. When I searched for the term 'rend' only one thread came back which suggested to change the port from 5190 to 443. I did this and it didn't help.
Any other suggestions?

Hi Craig,
In the Linksys set up pages you have Application and Gaming (Which is where I think you are talking about)
In there there are several options.
Port Forwarding, Port Triggering, DMZ (possibly UPnP Forwarding and QoS)
Disable any Port Forwarding or Port Triggering. DO not use the DMZ.
Save settings. (you should still have Web browsing and Mail abilities).
GO to the Administration tab on the top row.
Enable UPnP.
Save Settings.
UPnP allows multiple computers to use the same ports.
This way the Linksys can be left doing DHCP if you wish and it will not matter if your computer gets a new IP every now and then. Also the Ports are opened by the application and close after a timed period of non use.
You can limit the "Hops" to the number of devices the computer is from the Linksys (1 ?) to make it more secure.
On the main set up page you could limit the the DHCP range to the number of computers you have to prevent outside connections.
The ports you describe so far are only the TExt chatting and file sending ports
11:23 AM Monday; August 13, 2007

Help needed working with layers and exporting from acrobat3d

hi, i am repostng this message becaus eihad no success last time, and I am working under a tight deadline for a school project. any help will be tremendously appreciated
I received an Acrobat 3d file with a model that was originally created in CATIA v4 embedded in it.
I need to export the model for use in rhino. Currently the model size is enormous as an IGES that Windows runs out of memory when attempting to open. This is a bit wasteful since I do not need all of the model, I just need a layer of it. I noticed that when exporting to IGES you have the option to export hidden or not, and I have hidden the layers i do not need (via Isolation) and still I get the whole file.
Is there a way I can do this? export the file With the layers under the model tree? or is there a way I can delete a layer? or how can I make the hidden object feature work when Exporting IGES as not to get the things I dont need?
I read that you can open the model in Toolkit to edit it but it wont let me, open it... no "edit 3d in toolkit" option and when i open the pdf in toolkit it says unknown file....
is there a way i can open the embedded model in CATIA again?
thanks for the help

Please email me your contact information at [email protected] and I might be able to help you.
Thanks.

G5 crashes when I try to send files via iCHAT

No idea whats causing it but when I try to send files via ichat it gets about 10mb in and then the machine crashes....
Don't think its to do with my broadband connection as this seems stable and am not running any other programs in the background.......Desparate to sort this -please help.

Hi Mart06,
Welcome To The Apple Discussion Pages.
I can not find anything on the AIM site that suggests there is a Limit on file sizes.
The largest one I have tried myself was 9.2Mb
The closest thing I could find to the point in question was the last question on this page.
If the file is not stuffed so far you could try that to make it smaller.
I have AIM 4.7 for Mac and can not see any info in the Help there about any limit to the size of File Transfers.
4:12 PM Wednesday; March 8, 2006

Privacy settings help needed

Hi there
I've recently updated the system to IOS7 and since this it won't let me send pictures over imessage, twitter, facebook, instagram or anything. It's told me to go to settings > privacy > photos but in the photos section there aren't any apps in there for me to slide across to allow?
I've downloaded them again but it's still not letting me send any. Help needed please
Thanks
Josh

I don't have any social media stuff, so I can't tell you about FB, twitter or any of that stuff. But I can tell you that I am able to send pictures/screen shots and what not via iMessages. Both to other iPhone users or non-iPhone users, using text obviously.
With that being said, under Settings---> Privacy---> Photos "iMessages" isn't there. Other programs are and they are enabled
Have you done a hard reset? Press the Sleep/Wake and Home button at the same time. Continue to hold them until the Apple logo shows up?
KOT

Guys i need to get m itunes account unlocked its stopping mefor making in app purchases please help need to make a purchase within 30 minutes

guys i need to get my itunes account unlocked its stopping mefor making in app purchases please help need to make a purchase within 30 minutes

If you've tried to buy something and your've been charged for it (and it's not a temporary store holding charge) but haven't received it then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Sharing Projects via Ichat

I'd like to share a project I'm working on with a friend using Ichat.
Do I need to save the Project as something specific to do this?
Or can I just drag & drop the project file like I would a photo in Ichat?
Many thanks in advance.
Ali

This would be no different to emailing or ftp-ing the project.
I'd suggest that you open the project you want to send, then do a 'save as..' instead of just a save, save it to a different location (create a folder on the desktop for instance) and make sure you include all the instruments (tick all the boxes at the bottom of the window when you save it).
This will save a copy of the project - which you can then remove without worrying about your original project and allow you to send this instead of risking screwing up the 'real' project. This is just best practice.
Then right click (ctrl-click) on the folder you saved the project into and choose the option to 'compress' the folder. You should then be able to send the resulting zip file via ichat.
P

Multiple ethernet network adaptors + MySQL/php5: configuration help needed

I would be grateful if someone could give me some advice on how to configure multiple ethernet adapters under OS X 10.5.6
I have set up my system to work nicely with two ethernet network adapters, each with its own fixed IP. This bit works just fine. The machine supports two separate servers - a mail server and the OS X Apache2 server. I have configured the mail server to only listen to one of the IPs, and the Apache2 server to listen to the other (via httpd.conf). The system also has MySQL and php5 installed / enabled, and these services are only used by the Apache2 server.
The problem I have is that when I start the machine, initially the php5 system cannot connect reliably to the MySQL database system. The fix I have found is to temporarily make the ethernet adapter connected to the mail server 'inactive'. While this is so, the php5/MySQL connection to Apache2 works. Curiously, once an initial connection between php5 and MySQL has been made, subsequently I can make the mail server's ethernet adapter active again without further problems.
I initially thought this might be due to 'service order' issues - but changing the service order (e.g. putting the Apache adapter 'above' the mail adapter in the service order does not help. The fix only works by making the mail adapter inactive temporarily.
I suspect that there is some configuration change I can make to clarify the setup I have. The MySQL and Apache installations only need to talk to the Apache server - but I am not sure how to record this configuration in the OS X system.
Thanks in advance for any assistance that you can provide.
Message was edited by: Gavin Lawrie

Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting     Started with Wireless - View the full discussion
conf t
interface     Dot11Radio0
no ssid     Cisco_Kamran_BGN
no encryption mode     ciphers aes-ccm
exit
interface     Dot11Radio1
no encryption mode     ciphers aes-ccm
no ssid     Cisco_Kamran_A
exit
dot11 ssid     Cisco_Kamran_A
vlan 10
dot11 ssid     Cisco_Kamran_BGN
vlan 11
exit
interface     Dot11Radio0
encryption vlan 11     mode ciphers aes
ssid     Cisco_Kamran_BGN
exit
interface     dot11radio0.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio 0.11
encapsulation     dot1q 11
bridge-group 11
Configuration of     subinterfaces and main interface
within the same bridge     group is not permitted
exit
interface     Dot11Radio1
encryption vlan 10     mode ciphers aes-ccm
ssid     Cisco_Kamran_A
interface     dot11radio1.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio1.10
encapuslation     dot1q 10
bridge-group 10
Configuration of subinterfaces and main     interface
within the same bridge     group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

MULTICLIP HELP NEEDED VIA iCHAT

Similar Messages

Maybe you are looking for