MultiClip Problems with Pluraleyes in FCP 7

I have 4 cameras all shot with a DSLR Camera. Each camera is about 1 hour and 15 minutes long and has both video and audio on it.. Of course, each camera has multiple cuts in them when the videographer pressed stop and go while he was shooting.
There was also 3 seperate Audio only tracks that were shot seperately.
I lined up the 4 cameras and the 3 Audio files in a FCP Timeline and went to Plurareyes 3 to sync it up, It worked great. The syncing is perfect.
I then exported it back into FCP 7 synced up and I also exported it as a MultiCam sequence.
This is where it gets messed up.
I go back into FCP and Double Click on the Multi-sequence and it appears in the Viewer like it should.
All I see is black. I scrub through it and about 28 minutes in I see 2 out of the 4 cameras I need to see all cameras so I can pick and choose which one I want to use at any given time. NO Audio is playing. It is not working correctly.
When I went to look and try and figure it out, I see that FCP, instead of making it 4 cameras, made it 62 different Video and Audio Clips.
Why??
How can I use Pluraleyes with this footage and make a Multicam Sequence that I use to pick shots like it's supposewd to be used.
Any help would be appreciated.
Thanks in advance.
Mountain LIon
Power Mac
Inel Xeon
10 GB  RAM
Dual Processor
FCP Studio 3
Plural eyes 3 and 2

Best to ask Plural Eyes this question. It's their software.
x

Similar Messages

  • Problems with Transitions in FCP Exported Files - How to Fix?

    I have completed an HD 16:9 project which plays properly with transitions in FCP 5.1.4, but when I export it, the transitions have a momentary "blink" to black just as the they begin, and then they complete normally -- a very distracting annoyance. I tried several different transitions, and the same problem occurs. I also tried exporting to several different formats and the problem persists. I also tried applying the flicker filter and the deinterlace filter with no success. I would appreciate any help!

    I would also check to make sure the frame rates between your media and sequence really match. This type of thing has also been seen when working with 24p DV50 material - renders such as transitions were showing time shifts and repeated frames.
    If this is HDV, you might try isolating one offending transition, exporting the clips as AIC and rebuilding an re-rendering it just to see if it helps. If it does, you could probably use media manager to convert all of the clips in your sequence and reconnect automatically.
    Hope this helps -
    Max Average

  • Problems with Timecode in FCP

    Hi there, It's 2 am and Im stuck at my edit suite trying to recapture some footage which was shot in HDV 1080i60i, I've captured all the tapes in DV NTSC and am now trying to Online the footage in UNCOMPRESSED 10 bit but apparently some of the footage I captured previously somehow is non drop frame, even from the same tape, it is crazy and a nightmare because I have already finished editing my sequences without having noticed this problem and now that I want to re capture FCP tells me that I am trying to capture drop frame footage to a non drop frame clip. I continued with the capture and my whole sequence has been messed up, things are not as they used to be, the clips have slipped frames and it doesn't look the same. What can I do Please help!!!!! Im going crazy.
    Thanks
    Gino

    I'm betting your show is around 60 minutes long? 3.5 seconds is about the difference between non-drop time code (which 23.98 is) and real time (drop frame), which I believe QT player displays.
    MtD

  • Problem With PluralEyes Data

    After importing synced video and audio from PluralEyes 3, a 4 channel audio recording will become a 16 channel recording (with 12 empty tracks) once clips are merged in Premiere.
    Also, the clips are marked as being out of sync when dragged into a timeline, when they are prefectly in-sync.
    The only solution I've been able to come up with is to go to the Modify feature under Clips and reassign the working audio tracks (1, 6, 11 & 16) to channels 1-4 in the Source Channel.
    But the tracks are STILL marked with the red Out of Sync markings when the merged clips are dragged into the timeline.
    Also, all programs are up-to-date.
    Thanks!

    same problem here, merged clips are simply a nightmare, full of bugs.
    the only solution that works for me at the moment: use only the clips from plural eyes "replaced" sequence, then the sync should be ok and you will get a mono audio clip.

  • SOLUTION: Are you having problems with using HDV, FCP X and iDVD?

    If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem  .  .  .  iDVD squashes the image as shown in the screenshot below.
    Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
    This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
    There are 2 solutions to this problem:-
    1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
    The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
    2. Create an Apple Intermediate Codec preset for HDV.  This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
    Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
    So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
    I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
    What do you do if you haven't got Compressor?
    Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

    Ian,
    Thanks for the tip!

  • Problems with Motion 2 / FCP-Interaction

    Hi!
    Somehow Motion 2 and FCP 5.1 don't play too well together on my system. Here's the problem:
    I am producing tutorial movies for a certain application. My workflow is as follows:
    1. Record screen movies with SnapZ Pro. I use the Animation codec, resolution 1152x720.
    2. I import the clips to FCP and render them. The clips rendered by FCP have a data rate of 4.2 MB/sec.
    3. I want to add text overlays to some clips, so I send those clips over to Motion 2. Here is where the first problem occurs: Motion doesn't import properly from FCP. Let's say, the clip I send to Motion runs 50 seconds. Motion will play the clip for about 3-5 seconds and then freeze the video, whereas the audio continues playing. I resolve this problem by deleting the faulty video track that FCP has created in my Motion project and then importing the corresponding video file manually into Motion 2.
    4. I do my Motion stuff and save the file.
    5. Back in FCP, I have to render the clip again. Sometimes I have to reconnect the clip with the Motion file, sometimes not. Don't know why.
    6. After rendering, the second problem occurs. The video clip is blurry. By right-clicking the clip I get to open the object settings I find that the data rate of the clip altered in Motion is only "500/s". Also, there doesn't seem to be codec anymore.
    For illustration I habe posted two pictures. First, the original clip created with SnapZ and imported to FCP:
    http://homepage.mac.com/cmeermann/filechute/Original%20Clip.jpg
    Now, here's how the clip looks like after altering it in Motion and rerendering it. As you can see, it is quite blurry:
    http://homepage.mac.com/cmeermann/filechute/Motion%20Clip.jpg
    My client is waiting for results, so I'd really appreciate some quick answers.
    Thanks in advance,
    Christian Meermann
    iMac Core Duo   Mac OS X (10.4)   1,5GB RAM
    iMac Core Duo   Mac OS X (10.4)   1,5GB RAM

    happy to help...
    New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...
    Patrick

  • Problems with FCP and Nvidia GeForce 8600M GT video card

    Not sure if this should be in the MacBook Pro forum or this one...
    I am having trouble with the GeForce 8600M GT video card while editing in final cut pro (and after effects). I have talked with numerous people at applecare, but they say that they are unaware of issues regarding the video card.
    The problem: It's almost like the card is unable to keep up with professional video applications. Whenever there is movement in the video I'm editing, I get lines across the screen. Not sure to how better to explain it than to say it looks like the video card is having a tough time refreshing. (I can take the same video to a much older power book, and it plays perfectly, so its not the source file.)
    At first I thought it was an FCP issue, but I just started using after effects, and I'm having the same problem in there. If I edit in after effects, when I play it back (in after effects), I get the lines. I can then export the project to a quicktime file. The quicktime file plays perfectly (no lines) when not involved with a professional application. Then if I import the same quicktime file into FCP and play it back in FCP, the lines happen again.
    Is anyone esle having this problem? Any thoughts? Any solutions?
    Thanks!
    Michael
    Message was edited by: mjaffe00
    Message was edited by: mjaffe00

    I had searched the macbook pro forum, but not this one. It seems that the "screen tearing" issue has been talked about a lot, so I apologize for the repetitive nature of the post. I will say that I am fairly shocked that given how many people have clearly called applecare, no one there seems to have a clue that there is a problem with this video card. I have talked with at least 4 different people in the FCP specialty group, and not one had any clue what I was talking about... 3 of the 4 were fairly insistent that it was a video source issue on my side.
    Message was edited by: mjaffe00

  • Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

    Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

    I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
    But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
    How are you adding the files to Compressor?
    In FCP, what are your footage properties (command-9) and sequence settings (command-0)

  • FCP Problem with Firewire output to external monitor and speaker ???Help

    i have a g5 powermac. the problem is when using Final cut pro 4hd. when i output my work through firewire to my external monitor and speaker i have a problem with the audio signal. Theres feedback/noise/hiss from the speakers. The firewire connects to DSR-11 vtr deck which feeds my monitor and speakers. it only happens when in FCP is set to A/V firewire output. does not happen if Video output is not set to firewire.
    I Diagnosis is that it is not my dsr-11 deck or firewire i've ruled those out. The problem is either FCP software or Hardware problem with my G5
    Does anyone have a similar problem. please respone, i will try to answer any respones,
    Thanks
    powermac g5     powermac

    CaptM
    From the firewire that feeds the dsr-11. on the output, i use s-video cable to my monitor (sony pvm-14l) and High Quality rca cables thet feed the audio to the Roland Speakers.
    I've changed all wires and still have audio problem. I,ve changed my Dsr-11 deck to my camcorder and still have the problem.
    If any of u guys use FCP The problem happens When I select view> external Monitor > and select firewire for Audio/ and video. I have never changed my editing habits, something just went wrong with the signal, I think its a Hardware problem with the firewire connection. I'm Going to have to bring this to a Apple Service Center In my local area one day.

  • Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

    Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

    Not here;  updated three systems without issues.
    Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
    Russ

  • Mouse problem with FCP: drops clips or do not respond to clicks.

    hi to all.
    since i bought my macpro i've been noticing a very annoying problem when using FCP. there's a moment when the mouse stops to work properly and begins to drop clips when i try to move it or do not respond to clicks. two examples: 1- i want to move a clip from the end of the timeline to its beggining. in the middle of the way, it just drops the clip, as if i stoped pressing the mouse button. 2- i choose the pen tool so i can play with opacity and create fades. in the middle of the process of adjusting, it stops to work. i have to keep pressing several times to complete the action.
    the problem is basically with the CLICK function. the cursor responds to the mouse properly, but when you click something to move it, it doesn't recognizes when you stop it and drops things. it happens only with fcp.
    i'm using fcp 6.0.1, though the problem happened when i was using fcp 5.

    I have a similar problem with my mouse in FCP. Perhaps not the same thing, but I think I figured out it's due to the design of the mouse. It's an Apple A1152, a white one-button mouse with a little scroll wheel. The thing is the whole top presses down for the click, and if I don't grab the two little tabs on the side that give you the leverage to keep on pressing the top, across larger distances I lose the pressure necessary and I drop whatever it is I was dragging. It's a pain because my hand is not the right size or shape to naturally get a hole of those little tabs. I don't know if your problem is related in any way but I thought I'd mention it just in case...,

  • Is anyone have a problem with share function in FCP?

    I am having real problems with FCP 7 "Share" function.  It does not allow me to use it.  And when I send to Compressor that does not work either.  Help any one?

    here it is.

  • FCP XML to Flint - Problems with Time Remap

    My Flint artist and I have had some problems with the XML Export and Import that we cannot figure out. The XMLs from FCP sequences that have variable speed Time Remaps applied show up on the Flint with those particular clips with the wrong in/out points in both the source and record times. Also, the speed ramp info doesn't show up properly.
    We have followed the Flint manual to a T on importing correctly. Anyone encountered this or know a solution? Especially why it's throwing off the in points. It screws the whole timeline when that happens.
    Thanks in advance.

    The TimerEvent target is a flash.utils.Timer object and does
    not contain a reference to your lblTimeUntil label.
    Recode
    trace("Seconds Left" + evt.target.lblTimeUntil.text);
    to
    trace("Seconds Left" + lblTimeUntil.text);
    and you will not blow up anymore.
    This code will display the count up till refresh.
    public function onTick(evt:TimerEvent):void {
    var minuteTimer:Timer = evt.target as Timer;
    lblTimeUntil.text = minuteTimer.currentCount.toString();

  • FCP External Video Playback problem with HDV

    Hey all. I just got the Canon HV30 HD camcorder and it is excellent. I am able to import the HDV footage to FCP no problem. I'm recording in 24p mode by the way.
    I can't seem to get playback from the timeline back to the Canon so I can see the edited footage on the Camcorder's LCD screen. I've tried everything. All the settings seem to be grayed out. How am I suppose to get my edited footage from the computer back to tape? Help is much appreciated!
    Greekappi

    I'm not the person at our facility that does this, but we do it all the time. However we are using the Sony HDV decks, 25U or something like that.
    I have also seen the stuttering video you described, I'm not sure why it does this on some projects and not others, it is very random. When it does stutter I render out a complete self contained Quicktime and then print to tape from that. However, I occasionally still have this problem with that? But it does seem to help more often than not.

  • Problems with dropped frames in FCP 4.5 Log & Capture

    Thanks for the advice on my previous post regarding sound problems - those are now sorted, but I am having problems with dropped frames in Log and Capture. I am using FCP 4.5 with OS X 10.4.10 on a Powermac G4. CPU 867 mhz dual processor. L2 Cache 256 kb, L3 cache 1 mb. Memory 1g. Bus speed 133hz. I am capturing from a Canon XM1 via Firewire. The scratch disk is a 500gb Seagate FreeAgent USB 2.0, 7200rpm.
    Basically, the video and audio are fine while playing back in Log and Capture and I can control the device, but any attempt to capture, whether Capture Now or Clip result in a very jerky picture and aborts with dropped frames after a few seconds. The sound is ok for the few seconds before it aborts. There do not appear to be any problems with the timecode.
    My capture preset is DV Pal 48hz.
    Any advice or pointers gratefully received.
    Thanks, Ally

    Well quite. I have just tried it in the internal hard drive and it works fine now. I am going to have to capture everything to my small hard drive and move it across to the external. Then, when I have finished I am going to bang my head against the wall and buy an external HDD with Firewire.
    Thanks,
    Ally

Maybe you are looking for