Multiclip switching angles issue

I have a multiclip edited into the timeline. I'm using the audio from angle 2. With the multiclip open in the viewer as well, I have video selected as the switching method. I am not using the multiclip keyboard layout. I do have multiclip playback selected. When I play the clip, and hit Shift 1 to switch angle to video angle 1, it places a blue sequence marker in the timeline as long as I'm playing. As soon as I stop playback, the marker disappears, and the video for the entire duration of the multiclip switches to angle 1. Shouldn't it just switch at the marker location, or do I have to do cuts instead? What is the point of the markers then?

I can think of some reasons:
Sometimes you did cut to angle 3, where you wanted to cut to angle 2, but the cutpoint was OK.
Well, then you can just switch to the right angle.
Or sometimes you want to view both angles in full screen, one after the other. Just switch angle.
Or sometimes revieing a scene with resp angle
2, 4, 3, 1, 2, 4 makes you think: "No, it should be
2, 3, 4, 1, 4, 2. So just switch those clips while the pointer is over that point. Maybe a little trimming here and there. Done.
And some more reasons...
Rienk

Similar Messages

  • Belkin KVM Switch 2 issue

    recently bought the new Belkin Switch 2 KVM gizmo.
    Hooked it up to a G5 PPC DVI->VGA & G4 PPC(AGP) VGA. Montior is a Samsung Syncmaster 172T (1024x768 @ 60hz), keyboard & mouse are Apple Pro, both wired. Running 10.4.7
    Boot up the G5 & it gets through boot up but then crashes - in respect that although login/startup items continue to load, the mouse is unresponsive & the screen defaults to the generic wallpaper & the screen resolution is not as specified in system prefs (ie. lesser/basic res.)Only way out is to hit the power button til it turns itself off.
    Boot up the G4 & it works perfectly. Have reversed the switch cables to check them but no change to the G5 crash. Looks to me like there may be an issue with DVI-VGA and the Switch2.
    Has anyone experienced this & more importantly figured out how to solve this issue?
    TIA, Andy
    G5   Mac OS X (10.4.7)  

    The new Apple keyboard is very underpowered. Even if connected directly to the computer mine won't power my Ipod, so i would say it's likely a power issue.

  • Oracle to SQL server switch mapping issue?

    Hi All,
    We are switching the DB from Oracle to SQL. As a result our existing mapping seems to create issue while we are trying to INSERT data.
    We changed some of the date setting as and also the hasQuot to Yes so when it goes to the SQL server it runs as CONVERT(datetime,'currentDate/time', 120)
    Before doing this change we were getting the error
    com.microsoft.sqlserver.jdbc.SQLServerException: Conversion failed when converting date and/or time from character string.
    Now we are getting the error
    com.microsoft.sqlserver.jdbc.SQLServerException: String or binary data would be truncated
    Also other date fields are sent with '' like '20150427'
    Additionally fields which are Characters are also sent in '' like 'Shaibayan' but when these fields are coming empty at that time the Audit log SQL INSERT shows them as ''' i.e. 3 single quotes instead of '' which we should get.
    Thanks,
    Shaibayan

    ORA-28545:     error diagnosed by Net8 when connecting to an agent
    Cause:      An attempt to call an external procedure or to issue SQL to a non-Oracle system on a Heterogeneous Services database link failed at connection initialization. The error diagnosed by Net8 NCR software is reported separately.
    Action:      Refer to the Net8 NCRO error message. If this isn't clear, check connection administrative setup in tnsnames.ora and listener.ora for the service associated with the Heterogeneous Services database link being used, or with 'extproc_connection_data' for an external procedure call.
    And a brief search of Metalink gave me a load of forum threads which discuss the same issue.
    Edited by: Satish Kandi on Apr 29, 2009 12:19 PM

  • Activate or switch device issue

    I purchased an Iphone 5 with my upgrade with the intent to turn around and sell it on ebay (same thing I did with my iphone 4 upgrade last time). I received the phone, brought it to the verizon store to have it activated and then get switched back to my Droid...all went well and I even called verizon later to confirm the iphone 5 had been activated on my account. Now my problem is if I go to "activate or switch device" I am still getting a "verify your new device" page with the iphone 5. Shouldn't this have gone away once my iphone 5 had been activated on my account?
    With my previous upgrades, once I activated/deactivated the new phone and reactivated my old phone I was free to activate any phone I wished on that number. There are no issues with "activate or switch device" on the other 2 lines on my account, just the line I used to get the upgrade.
    Any ideas?

    Call customer service from a line NOT involved in the switch you want to do - 800-922-0204.  Sometimes I've been able to switch devices on my own, but the last few times it's been glitchy, and I've had to call CS.  To Verizon's credit, the CS reps have been very helpful and have managed to get the correct device(s) activated in relatively short order.
    From the main menu, choose Option 4 (Other) and then say AGENT at the prompt - you should be connected to a live person pretty quickly.

  • Trimming a Multicam sequence (not just switching angles)

    I've just started using Premiere 5.5 and I'm trying to see if there's a simpler way to achieve what I need with MultiCam editing. Here's my setup:
    I have 3 clips, shot simultaneously from 3 different angles, each lasting about 20 minutes. I want to cut between the different angles AND edit out the dead air/blown lines/etc. The final clip will probably be around 5 minutes.
    If I was editing a single clip, I would simply pull it up in the Source Monitor, use Mark In/Mark Out to "grab" the good pieces, and then Insert/Overwrite that footage into the Timeline. Simple no-nonsense way to edit 20 minutes down to 5. But with MultiCam editing, the entire 20-min original footage is already nested in the sequence, and the editing is simply choosing camera angles. If I want to trim the footage in addition to choosing camera angles, it appears I have to go into the TimeLine itself and do all my trimming and dragging from there.
    Is there a way to preview the MultiCam footage in the Source Monitor and simply Insert the pieces you want into a brand new sequence? (In addition to choosing the different angles for each piece?) For me, that seems MUCH simpler than having the entire sequence on the Timeline itself and chopping out 75% of it after the fact.
    I might be missing something obvious, so please let me know! I've checked out several different Video Tutorials from Adobe but they all focus on a Multicam edit of choosing different angles with no real cuts within the footage itself.
    Thanks,
    Rich

    rchallen1 wrote:
     ... with MultiCam editing, the entire 20-min original footage is already nested in the sequence, and the editing is simply choosing camera angles. If I want to trim the footage in addition to choosing camera angles, it appears I have to go into the TimeLine itself and do all my trimming and dragging from there. 
    Is there a way to preview the MultiCam footage in the Source Monitor and simply Insert the pieces you want into a brand new sequence?
    Not exactly. But there is a workflow that accomplishes what you want in a slightly different way.
    What I typically do is to nest the multi-cam edit sequence into what I call a "target" sequence. Then I do my timeline editing on this target sequence. Why? So if I screw it up I don't have to start over from scratch and redo my camera angle choices all over again. I can just delete my target sequence, then create a new one, nest my multi-cam edit sequence in this new one, and start over. Repeat as needed until I get what I want. Typically I'll have three or four of these targets, pulling different bits and pieces out of the results of the multi-cam edit, for web videos, teasers, or to isolate a single topic.
    Easy enough to do. When you get done picking camera angles, go to the Program Manager window and click on the "new item" icon on the bottom edge of the window. Select "sequence" from the pop up menu, and name it something you can identify like "target". Then click on the multi-cam edit sequence icon in the Project Manager window, and drag that down to your new timeline. Edit at will -- nothing you do in this new sequence will harm or change anything you did in your multi-cam edit sequence. But, if you change things in your multi-cam edit sequence, this changes will trickle down to your target sequence. So you can still adjust your timing on camera angle switches and these changes will show up in your target sequence.

  • Monitoring Catalyst Switch (MIB issue)

    Hello,
    I am trying to monitor Catalyst WS-C3750G-24TS-E switches with Openview NNM. Before being able to do this, I have of course to import the MIB in Openview in order to interprete the traps, MIB entries,... that I get from/look at the switch.
    In the Management part of the datasheet of the switch, there is a list of about 20 MIB's, does this mean that I have to import all these MIBs in NNM in order to be able to monitor the switch??
    (I have the same issue also for Catalyst WS-4506 Chassis, WS-X4548-GB-RJ45 48x10/100/1000T ports blade an for the loadbalancer CSS11501, but probably the response for the catalyst will respond also the questions)
    Best regards
    CB

    Thanx for your reply.
    In fact, the core functionning of SNMP traps, requests is clear for me, perhaps I was not clear enough on that :-). What I need to know is if importing a single MIB allows me to interpret all the information that I get from the switch(all the traps and gets) or do I need to import all the MIBs that are indicated in the whitepaper. I could imagine that most of the MIBs contain redundant information so there would be no need in importing them all, but I am not sure on this point.
    Thanx
    CB

  • Switching Theme Issue

    Hi All,We have the following issue.
    I Apply the weblog Switching Themes by Topic - A Color Code System for the Portal but I have the following issue.
    The header area is updated with the new themes. However, the inner page is not affected by the theme changes. We are trying to change the back color of the portal, but when we change the theme it only changes in the header area but not in the content area
    Roberto

    Hello Roberto,
    Have you resolved this issue, I need to implement the same on my project. I tried the weblog but no use.
    Header area is Switching the themes. However, the inner page is not affected.
    If you have the trick to make this work, could you please share the knowledge.
    Anand

  • An Alt+Tab app-switching icons issue

    This may sound trivial, but it's really bothering me.
    When I switch apps with Alt+Tab under GNOME, there is this low resolution image-missing icon, for certain programs.
    And I don't really mind those few programs not having their own icons, it's the low res generic one that I'm annoyed with.
    So, ok- I went out to search for this icon's source, and I actually found out that these image-missing icons reside in /usr/share/icons/gnome/<RESOLUTION>/status directories.
    And, to my surprise there is actually a perfectly good 256x256 .png image in its appropriate directory, called image-missing.png
    Worse still, I tried to remove (and backup) all the low res ones, leaving only the 256x256 one in place, but to no avail.
    Somebody care to explain all this to me?
    Thanks.
    Last edited by abraxyz (2012-11-17 19:39:26)

    I am still having this issue. I've noticed it on my old iMac with a wired keyboard and mouse, my new iMac with a wired keyboard and magic mouse and lastly my MPB, with obviously a built in keyboard and mouse. It's not a failed USB device or failed hardware IMO. It is more likely a bug with SL or a third party app.
    Though I personally don't run any third party apps in the background other than Dropbox.
    Has anyone else out there still been seeing this issue?
    I actually took a short video of it happening tonight, you can see it here:
    http://vimeo.com/23304748
    I'm running OS X 10.6.7. Thanks for any insight or help.

  • Nokia 6500 Classic ..Switched OFF Issue

    Dear Concerns,
    I have a Nokia 6500 Classic Mobile Phone. It has a issue that It switched OFF automatically after some time . I have replaced the battery but issue is still there. Kindly guide us about this issue.
    Regards,
    Quasir

    Do the following procedure, it might help.
    1. Take off the battery for 1 minute then put it back on
    2. If the issue persists, update the software of your device. You may visit this link on how to do a software update http://www.nokia.co.uk/support/download-software#. Before doing so, back up all your files first.

  • SF-302 switch connectivity issue

    Hi Forumers'
    i found that cisco small business SF302 PoE managed switch connect with the end device (RFID component) would causing packet drop issue.
    how should i isolate the issue and proper troubleshooting? would it cause by the PoE issue, or the 10/100 base etc.
    any suggestion are welcome, thank you
    Noel

    Hi Noel,
    Interesting series of exchanges, sorry for jumping in Mr Carr. 
    Alarm bells ring in my mind,  when you say ". Switchport is running o autonego, so the switch prefix it to 10-Full, any ohter mode than this is not working."
    Did you manually set a port  speed  to 10-full or does autonegotiation  settle for 10-full?
    Can you also check within the RFID device, what it thinks is it's link speed and duplex ?
    ( if  the switch port or the RFID device have their speeds manually set, then the NIC/switchport autonegotiation process WILL not work.  for autonegotiation to work, both the RFID NIC and the switch port must be set to autonegotiate)
    I am thinking there is a autonegotiation or flow control issue between the RFID device and the switch.  A previous cisco Question and answer section says  (in blue) that ;
    Autonegotiation issues can result from nonconforming implementation, hardware incapabilities, or software defects.
    Noel, this brings up a point, have you checked if the manufacturer of the   RFID devicefor  the latest NIC driver firmware ?
    Please be diligent and check this with the manufacturer of the RFID device, as these issues can be caused by old firmware..
    When NICs or vendor switches do not conform exactly to the IEEE specification 802.3u, problems can result.
    I think you have flow control to work with , but now I can understand packet loss, if the is a autonegotiation issue then packet loss can result.
    Hardware incompatibility and other issues can also exist as a result of vendor-specific advanced features, such as autopolarity or cable integrity, which are not described in IEEE 802.3u for 10/100 Mbps autonegotiation.
    It could be very interesting to see a screen capture like the one below;
    1.  of the Etherlike statistics for the port that is connected to the RFID device .
    2. the error log,  might be very informative to indicate a potential cause of this issue.
    But, in the back of my  mind,  seeing 10megFull duplex  as a setting tells me that autonegotiation is having issues, which points me to a NIC firmware issue in the RFID device.
    You must be good and try to get a  updated NIC drivers for the  RFID device.
    regards Dave

  • Catalyst 4507R plus E Switch Discovery Issue

    Hi,
    I am having issues doing automatic discovery for Cisco Catalyst 4507R plus E Switch IOS 12.2(54)SG, I am using IP ping sweep to discover devices on my network.
    When i first setup LMS4.0 with few devices on the network, i discover the C4507 without a problem together with other devices i have on the network but for some reasons now its failing to discover C4507. I have large numbers of WS-C3560X and C4507 on the network, WS-C3560X always discovered just fine.
    I tried to use SolarWinds network device monitor I installed on the server to check if there's any SNMP or connectivity issues. I can discover C4507 using Solarwinds without a problem, so im suspecting it could be LMS configuration issue.
    Is there any special settings I need to tweak to make this working?

    A newer version of IOS should generally be fine.
    It's generally the SNMP sysObjectID that LSM keys into. As noted in the table you cited, it should be 1.3.6.1.4.1.9.1.1286 for the 4507R+E.

  • Tag-switching IP Issues

    Hi
    I have 2 routers with a FE link,
    7206 ---Trunk---> switch 3560-48 ---> link WAN with FE to ---> 3640 --trunk->sw3560-48-->customers,
    my Internet access is via the 7206 router.
    I need to stablish a ibgp session to configure VPN-MPLS for some services, i set the mpls parameters and is posible to stablish the session,
    ip cef is on, and i can see the TDP Neighbor UP between 7206 and 3640.
    I have a switch 3560-48 connected to the router 3640, the link its a trunk, so i can use these ports for
    internet customer access.
    well, when I apply the tag-switching ip or mpls ip ont the interfaces between 7206 and 3640 link,
    the customers that have only internet access via the 3640 router have problems to browse, www.yahoo.com and some other pages.
    When I remove the tag-switching ip or mpls ip
    the service normalizes.
    could somebody help me with this issue
    Thank you
    Rolando

    Jon
    Thank you for the information,
    just to be shure,
    I can use this command to modify the MTU on my switches?
    sw(config)#system mtu 1520
    so could you help me to define where i must to change the mtu because i am using trunks,
    and which MTU must modify,
    the mtu only or mpls mtu or both
    i attach a diagram with the topology
    Thank you for your help
    Rolando

  • Silent/ring Switch Pressure Issue

    Hi,
    I've got an iPhone 3GS, still under warrenty. I'm having a small issue with the ringer/silent switch. If I switch it down onto silent and apply a little finger pressure to the top of the case, just left of the headset call speaker the silent mode goes off and back onto silent again when I let go.
    Can I ask if this is a common issue and what I need to do to fix it?
    Thanks
    Ben

    Thanks for the info Paul,
    I read what you said and decided to give UK support a call, I asked if they could repair my device under warrenty and they said I could just send it in for repair or replacement if need be
    Thanks for your help again

  • Time Capsule, NAS and Switch port issues

    I purchased a Time Capsule yesterday I can get the wifi to work but I am having some other issues.
    I need to be able to attach an exisiting Western Digital NAS drive to the TC through ethernet. When I connect it, it shows up in the finder but will not connect.
    I also need to be able to connect a Switch port into the TC as well. The switch runs ethernet thoughout the building to wall jacks as well as running a dedicated PC server.
    When I plug both these devices into the ISP modem/router they work but the TC wont recognize them.
    Am I missing some settings or steps that I need to take to make this work?

    Did you put the TC into bridge mode.. ??
    If it is a router.. all kinds of bad things can happen.. like dhcp server is working and double NAT preventing access.. much like you describe.
    Setup the TC in isolation from the network. before you plug it in.
    Bridge in v5 utility.. (if you run lion it is easy to download and install is still preferred).
    Bridge in v6 utility go to the Network tab and change it from DHCP and NAT to off bridge mode.
    Picture pending if you need it.

  • SG 500X Switch VRRP Issue

    HI all.
    I have 2 SG500x's that i am trying to establish VRRP over.
    When i kill the master switch, the backup seems to take over but the Ip address of the Virtual router cant be accessed. 
    Could anybody point me in the right direction?
    Switch 1:
    interface vlan 1
     ip address 192.168.84.1 255.255.255.0
     no ip address dhcp
     vrrp 2 ip 192.168.84.1
     vrrp 2 source-ip 0.0.0.0
     no vrrp 2 shutdown
     vrrp 2 description 2
    Switch2: 
    interface vlan 1
     ip address 192.168.84.2 255.255.255.0
     no ip address dhcp
     vrrp 2 ip 192.168.84.1
     vrrp 2 source-ip 0.0.0.0
     no vrrp 2 shutdown
     vrrp 2 description 2
    Any help would be greatly appreciated.
    Thanks
    Brett 

    Hello Brett,
    When you say the IP cannot be accessed what do you mean?  
    Does traffic still flow properly, or does something go wrong?
    I don't think you'll be able to access the switch at the virtual IP, since when the backup is acting as the forwarder it is just using that IP to respond to default gateway requests.
    What happens if you kill switch 2?  Can you still access the virtual IP address then?
    Christopher Ebert
    Network Support Engineer - Cisco Small Business Support Center
    *please mark/rate helpful posts*

Maybe you are looking for