Multilevel sales BOM explosion

Hi Experts,
Can you please guide for multilevel sales BOM explosion.
for example: 1 finished products
2 semifinished assigned to it
1 raw material is assigned to 2 semifinished.
Can you please help me in this Issue.
Thanks
Venkat

Hi Venkat,
         Make search in FORUM, you will find very good thread with detailed explanation incl:Customization for Multilevel BoM.
Note: I have searched its available, still not providing the link because i want you to make search by yourself.
Regards,
ReazuddinMD

Similar Messages

  • No Sales BOM explosion via BAPIs

    Hi all,
    We use BAPI_INQUIRY_CREATEFROMDATA to create inquiries; however this does not explode sales BOM; rather it creates just one line for the main material.
    Are there any specific input parameters that need to be modified to trigger BOM explosion in the background.
    Alternatively, are there any BAPIs or FMs at least to simulate BOM explosion and return the results so that we can pass them explicitly to the inquiry create BAPI.
    Or is there any other way to create sales documents with sales BOM explosion. (we can't change the BAPI as its part of the source code of a 3rd party application; but we have user exits before and after this BAPI call).
    Thanks,
    KC
    SAP SD

    Solved. Sales BOM does get exploded even in BAPIs. Checked with a different user ID and it worked. The RFC user seemed to have an authorization problem.

  • Sales BOM explosion in STO sch agreement

    Dear Friends,
    I have a requirement where sales BOM is to be exploded in STO sch agreement.
    I would like to know whether it can be done in STO sch agreement.
    I tried to achieve this by making the following config.
    Material master for Header part : Item category ERLA
    The STO PO order type is : UB.
    STO delivery TYPE           : NL.
    Item category                   :NLN
    Changes made in NLN
    Structure scope set to - A
    Application     as SD01
    In order to delivery copy control : Routine 301.
    With all these settings in place i am not able to explode the BOM.Kindly let me know if anything else is to be done in addition to this.
    Thanks.

    hi
    Structure scope set to - A
    Application as SD01
    where you have maintained, for which document type you have maintained
    let us know for further
    Regards
    vardhan

  • Sales BOM explosion

    Hi all,
    I have created a sales order specific BOM (usage 6 in CS61). I would like to know how the components will get reflected in sales order i.e. if we can re-explode the sales BOM in sales order.
    Strategy for parent material is 20.
    item cat group for both parent and child material is ERLA.
    let me know if you need more inputs.
    Regards,
    Yogesh

    hi
    Structure scope set to - A
    Application as SD01
    where you have maintained, for which document type you have maintained
    let us know for further
    Regards
    vardhan

  • Problem regarding Sales BOM explosion in Delivery

    Dear SD Gurus,
    The problem is,
    I've a BOM with Higher level item TAP.
    when i do a partial delivery, only for the first time the BOM is getting exploded and later on whenever the user tries to create the delivery, only the  header item in the BOM is displayed in the delivery. The user has to enter all the sub-items manually and also the quantity.
    what must be the reason?
    Please anyone try and throw some light. Its hard for the user to do so much data entry
    Thanks & Regards

    Hello Srikkanth,
    Thanks again
    but yes the check box for create delivery group is checked & also the structure group is A.
    This is basically a quantity contract against which the user has cretad four release orders.
    And for one order out of four user has created a partial delivery and invoice. Everything went fine until here.
    Now when he wants to again create a delivery against the same order, only the header item for the BOM is displayed.
    But the system is allowing to manually enter the sub-items and its quantity in the delivery and do the PGI and Invoice.
    This is what i am not understanding,
    and I hope you have understood the problem. Please ask me if any doubts.
    Thanks

  • BOM Explosion in CRM & ECC

    Does anyone know of a way to control Sales BOM explosion at the item category level in the middleware?  We have boms created in our ECC system for both standard and configurable materials.  For our standard materials I need the sales BOMs to explode on the CRM order (for ISA shopping basket purposes) and to prevent a duplicate explosion in the ECC backend I have parameter NOSTRUCTURE set to X in SMOFPARSFA.
    CRM does not support using configurable products as the header or component of sales boms so for these materials I do want the bom explosion to happen in ECC as the order flows from CRM to ECC.
    I've tried adding order types and item categories to the parameter names for NOSTRUCTURE but it didn't work.  OSS confirmed my findings that it would not work.

    Hi,
    I did work on single level BOM explosion in a couple of projects. As per SAP note 549341 - FAQ: BOMs in the sales order, it is very much possible to explode multi-level BOMs.
    Check this note and item category BOM explosion options.
    <b>Do not forget to reward if it helps,</b>
    Regards,
    Paul Kondaveeti

  • BOM explosion in Sales order with material variants

    Dear all,
    we would like to work with Variant Matching in the Sales Order. Additionaly we would like to explode the BOM....according to the SAP help this is not possible....
    http://help.sap.com/erp2005_ehp_06/helpdata/en/bd/05a7d69d3211d190380000e8a49aad/frameset.htm
    Does anybody of you has any ideas how and where to make this happen?
    Thanks for your help and kind regards
    Jan

    Hi,
    I have gonethrough the SAP link referred by you but never come across with any problem in type matching during Sales order even if the BOM explosion is set for Multilevel in Configuration Profile provided the other pre requisite set up was perfect.
    Regards
    Brahmaji D

  • How to restrict BOM explosion in Quotation and Sales  Order

    Dear all,
    How can we restrict BOM main item explosion in Sales Order.
    this BOM main item is having special order items which have to generate purchase requisition (item category - BANC),
    with out exploding bom main item, can we generate a  purchase requisition for BOM subitems, can any body explain me that how can we do that.
    your suggestions will be highly appreciated.
    thank you
    Raghu Ram

    Hi Raghu Ram,
    The BOM explosion is controlled by item category.
    In the item category configuration screen, under "Bills of Material/ Configuration", you can see "Structure Scope" field.
    Select the one which is applicable to your case:-
    "blank" - Do not explode material structure
    A - Explode single-level BOM
    B - Explode multi-level BOM
    C - Configuration, no BOM explosion
    D - Configuration, poss. with BOM explosion
    E - Structure from Customer_Function (product selection)
    Hope this helps
    Regards,
    Nicole

  • BOM Explosion Number in Sales Order

    Hi Experts,
         For a make-to-order case, I would like to assign a predefined BOM explosion number with fixed key date to a sales order item. Instead of manually assigning the BOM explosion number to the sales order item, is there any way to let the system automatically assign the BOM explosion number?
         As I read from SAP Library under the BOM Explosion Number (Fixed Key Date), it states "The system can automatically specify the BOM explosion number when entering planned independent requirements or customer independent requirements or when entering the sales order." So is there any configuration to be done in advance to enable the BOM explosion number to be automatically assigned to sales order item?
    Thanks,
    SW

    I tried also setting up the material and its BOM determination by specifying only 1 BOM out of multiple BOMs. Still,
    1. When I add the said material into sales order line and save the sales order, the BOM explosion number value never appear automatically in the sales order line.
    2. When I run the planning on the sales order through MD50, the planned results do not have the BOM explosion number attached.
    I think your advice is more applicable to selection of a BOM from multiple BOMs instead of determining the fixed key date based on appropriate BOM explosion number, correct me if I am wrong.
    Regards

  • BOM explosion in sales order

    Hi Experts,
    I have met a problem in BOM explosion in sales order.
    I have maintained the BOM with usage 5 and the conversion between header material and component of the BOM. But in the sales order entry, no matter how many qty I entered for the header material, after the BOM explosion, the qty of component is 1.
    Can anyone help?
    Regards,
    Emily

    Hi,
    Go to CS02 and select ur bom and go to components give 1 that means 1;1
    hope u get it
    regards,
    sadanandam kasarla

  • Bom explosion in sales order mrp(MD50)

    Hi Experts,
    In sales order MRP i.e. MD50 Getting the planned orders for header material(Finished goods) generated but for raw materials (BOM items) Purchase requisitions are not getting generated.
    Details:
    Header material A and raw materials B and C.
    In material B in MRP 4 coll/ind indicator is 2 And same indicator for C is blank.
    Now when we are running the MRP sales order based it will generate the purchase requisition for C only but not for B.
    In OPPQ we have done the setting for sales order BOM explosion.
    Can anyone please throw some light what is the setting missing in customization or in front end?
    Thanks in advance.
    Regards
    Vilas

    Dear,
    If you select individual requirement then system will not consider available stock and generate Proposals for every single requirments. Check in MRP4 view Individual / Collective .
    Also you will find PR and Plan order with account assignment of Sales order (in case of MD50).
    - If you select collective requirement then system will not generate planing proposals through MD50.In that case you have to go for individual MRP (MD02 / MD03)
    Please try and come back.
    Regards,
    R.Brahmankar

  • Multilevel BOM Explosion

    Hi All,
    I am using one Function Module "CS_BOM_EXPL_MAT_V2" for multilevel BOM
    explosion.
    Input parameters for Function Module..
    1. Finished Goods(Material)
    2. Application.
    3. Explosion Date
    4.Plant
    5.BOM Usage.
    6. Alternate BOM.
    Output  we are intresetd in
    1.MNGKO..Our assumption was this qty is the  final actual qty .....which comes after multiplicatio at all level...
    But in some case we find this qty as 0...
    Can any one please help in understanding the standard FM ..
    Tausif.

    Hi All,
    I am using one Function Module "CS_BOM_EXPL_MAT_V2" for multilevel BOM
    explosion.
    Input parameters for Function Module..
    1. Finished Goods(Material)
    2. Application.
    3. Explosion Date
    4.Plant
    5.BOM Usage.
    6. Alternate BOM.
    Output  we are intresetd in
    1.MNGKO..Our assumption was this qty is the  final actual qty .....which comes after multiplicatio at all level...
    But in some case we find this qty as 0...
    Can any one please help in understanding the standard FM ..
    Tausif.

  • BOM Explosion in CRM5.0 sales contracts. Is it possible?

    Hello CRM Gurus
    We have a situation where we have downloaded sales boms from ECC6.0 to CRM5.0 as structured products...
    Now I want to use this product on sales contract and based upon item category determination and other setting on item category such as all single level bom explosion, we would ideally like the BOM to explode on sales contracts.
    But SAP comes back and says that they dont support BOM explosion on sales contracts but on contrary  I have successfully exploded the BOM on service contract, so I am thinking there is a way to explode the BOM on sales contracts as well.
    Please share any thoughts/suggestions on this topic
    Regards and happy Thanksgiving to all.
    Thanks
    Jai

    Hi Rakesh,
    You can find the SAP notes in www.service.sap.com/notes. You need to have SAP OSS login id to access SAP notes.
    Regards,
    Paul Kondaveeti

  • Multilevel variant configuration without BOM explosion

    Hi!
    We have the following problem:
    We use BOMs with variant configuration in SD and NO BOM explosion. Means, enter the BOM-head material in the SD line, go to the configuration screen and configure the multilevel BOM. There are classes and attributes on every level in the multilevel BOM structure.
    After finishing the variant configuration, we save the SD order. If we enter the new SD order again with VA03 and go to the configuration of the SD line, the system forgot every attribute value on levels other than the BOM-head. We see the structure of the selected BOM materials, but no previously entered configuration value on other levels.
    Do we make something wrong, or is this a SAP standard "feature" ?
    Thanks,
    Richard

    Hi,
    This is a standard feature.The values which you will select for the configurable material,you will not able to see when you got to VA03.
    Reward points if helpful.
    Regards,
    Amrish Purohit

  • BOM explosion in Sales Order acting weird

    I am trying to make a simple BOM explode but it just wouldn't although as far as I can see it should. The details:
    1. I created a sales BOM (T-FUA01) with usage 5 (S&D), entered the components (automatically got L - stock item), entered the plant no. and saved it.
    2. I went to the Material Master of the sales BOM and changed the item category (not the general Item category) to ERLA.
    3. I checked that OR - ERLA -blank - blank combination leads to a TAQ from Customization.
    4. I checked that structure scope of single level BOM (option A) has been selected for TAQ.
    When I make the Standard Order (OR) though with Material T-FUA01, the sales BOM simply gets the Item Category of TAN and upon manually changing it to TAQ explodes when it should be doing this automatically. This made me think that apparently the system is using:
    OR-NORM-blank-blank
    that allows 4 different options to be manually entered (hence I can). But why is it taking up NORM instead of ERLA or even LUMF is simply beyond me. In frustration I even changed the General Item Category which has nothing to do with this but as expected did not help.

    Hi
    just re-check the following:
    1) in your material master, the item category group is ERLA in sales org 2 view field: 'Item category group'.
    2) You re-created the order after you changed the material master.
    3) You're using standard item categories?
    Regards,
    Raghu.

Maybe you are looking for