Multilingual www interface for WRT54GL (with polish language pack)

As project for my diploma, I've created a multilingual www interface on the base of official Linksys source code, I've also created and added polish language pack.
http://pkles.fm.interia.pl/wrt54gl_4.30.9.tar.bz2
Link to firmware image
http://pkles.fm.interia.pl/release.tar.bz2
Source code for all modified files.
You have to download the official source code for version WRT54GL 4.30.9 form Linksys GPL center site and overwrite it with my files. I recommend moving / removing the official /release/src/router/www/cisco_wrt54g_m/ folder before overwriting it with my files.
It's my first that big translation, and my first GPL project hope someone finds it useful.
[I don't take any responsibility for the results of using this code/firmware. This said I honestly believe that it won't cause any harm , the firmware works just fine on my WRT54GL.]

I solved the below error by editing in registry:
Error:
A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just this role, or remove the role using Control Panel.
Solution:
Open regedit (Start -> run), navigate to the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14
Under each role, UnifiedMessagingRole, have a look for an action and watermark entry, Delete these 2 keys, and retry. it solve this error, and You can now run the installation again of your "UMLanguagePack.en-US". and its done and installed now.
After "UMLanguagePack.en-US" Installation, i tried to continue installation of Exchange Server 2010 SP3, but I faced the same first error in UM role setup as the below,
What can i Do? please help urgently.

Similar Messages

Issue with Polish Language

Hi,
We are using SAP 3.1. In Polish Language, The meu's and sub menus are populating incorrectly. Meaning.. Its showing combination of "#" sign as this error only with Polish language and other languages is working fine.
for example in screen,
Materia#
Bran#a prsem
Please let me know if you need further information and help me out.
Thanks in Advance
Saravana

Hi,
Please post few more details like how this started. Is it because of upgrade (SP/Kernel) etc?
Thanks,
Manoj

SCCM deployment Win7 with multi language pack & software update languages

In our company we have a running SCCM infrastructure and deploy Windows 7 x64 (en) with all language packs. Now we integrate the software updates management process into SCCM.
My question is: Do we need to download and synchronize the software updates in all available languages or is English enough?
Thank you very much for your support!

Hi,
We don’t suggest deploying all language packages in one time. You may deploy default language and let users choose which language
package to install in Windows Update to save the network traffic.
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

IE 11 installation with Downloaded language packs

Hi,
I am trying to install IE 11 on a Windows 7 machine. ALl the pre-reqs have been downloaded and installed and if I try to install it its installing fine.
But, in the log file I have found that its trying to download and install 4 language packs. I have added those 4 language in WIndows 7.
I have those language packs installed locally, is there a way that it takes the language packs locally instead of downloading it from internet during its installation.
Thanks Chandan

Hello Chandan,
Do you mean that you want to use the language packs for Windows 7 as language packs for Internet Explorer?
We could take a look at the following article about language packs for Internet Explorer.
http://www.microsoft.com/en-us/download/details.aspx?id=40904
The file size is about 1.1MB in average.
We could download the language package for Windows 7 from the following article.
http://windows.microsoft.com/en-HK/windows/language-packs#lptabs=win7
The file size of language packs for Windows are much bigger than the packs for Internet Explorer.
They are different, we can’t use the local Windows language package for Internet Explorer.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Is there an audio interface for Imac with Leopard???

Hi Guys,
Im new here. Just got my IMac 24" 2.8ghz 10.5.1 Leopard last week. I love everything about it but Im having a real hard time finding an audio interface to use with Garageband. I tried the M-Audio Firewire Solo...found out quick it is not compatible. So I figure what the ** i'll downgrade and go with the M-Audio Mobilepre USB audio interface...usb, no fuss no muss right...WRONG! It doesnt work either! I tried downloading the most current driver from M-audio's website but still no go. I guess Leopard and intel machines are hard to please. Also the audio interface has to have phantom power to run a condensor mic. So my questions to you guys is this:
1. Are there any other audio interface options out there with phantom power for $200 or less that will run with my Imac ?
2. If not, why in the ** would Apple design a machine with Garageband then not set it up to accept any reasonably priced audio interface currently on the market? Tell me Im just uninformed...say it isnt so!
Sorry if it sounds like Im aggravated...I am! I had hoped to get some recording time in this weekend but its looking doubtful now.
I did post this in the Garageband discussion as well...thanks.
Any help with the mobile preamp, other interface recommendations, etc. are greatly appreciated!
Paul

Dr. Pee wrote:
Any help with the mobile preamp, other interface recommendations
Could you be a little more specific about what you mean
by "not compatible" -- is it a lack of Leopard drivers,
or what?
I haven't fiddled with GarageBand, but I have been using
[M-Audio's Fast Track Pro|http://www.m-audio.com/products/en_us/FastTrackPro-main.html] with audacity, and it seems to
work OK. (My beta-release ov audacity has some stability
problems, but I don't think they're M-Audio-related.)
Did you check M-Audio's web site for Leopard-compatible
drivers? The one for Fast Track Pro wasn't released 'til
mid December, if I remember correctly.
Although firewire is probably technically superior, I
went with USB to avoid conflicts between the audio box
and my Firewire external HD. There have been too many
reports of flakey operation with iMac firewire drivers.
I like the Fast Track Pro, but I'm not sure it would
be my first choice if I had it to do over. It's main
drawback is that it's USB 1.1 -- so, there are some
tradeoffs in the number of simultaneous I/O channels
versus data rate and resolution.
I've listed a few other USB options worth exploring
below -- I believe they all have phantom power:
[E-Mu 0404 USB|http://www.emu.com/products/product.asp?category=610&subcategory=611&produc t=15185]
[Edirol UA-25|http://www.rolandus.com/products/productdetails.aspx?ObjectId=704&ParentI d=114]
[Line6 TonePort UX2|http://line6.com/toneportux2>
I'm not sure what the situation is WRT Leopard-compatible
drivers for any of the above -- you'll have to check the
manufacturers' web sites.
Check amazon.com and MusiciansFriend.com for prices; also,
be sure to check the customer comments on MusiciansFriend.
They're often very thorough and informative -- typically
much better than Amazon's.
...rock on!
Looby

Polish Language Pack for 6500 Slide Nokia

Greetings!
I am based in Great Britain and have purchased a Nokia 6500 Slide on a "Pay and Go" sim card on the 02 network in England for my Polish Girlfriend.
The phone only has some European languages and there is no option for the Polish Language. Is there any software/firmware or language packs that I can download to the phone? Any advice gratefully recieved.
Thanks in advance.

you can take the phone to the nokia care point service to install your polish language.
NOKIA means:Night Of King In Alone

SapGui for Mac with Slovak language

Me too crashes but with Slovak language. If turned on MacRoman English with cpg 1404 everything is good but the diacritics.
Mac OS X 10.4.11 with Sapgui 7.10.r3 and English enviroment.
This is our configuration file in expert mode we use nowadays /but it´s very hard to read without č and others/
conn=/H/servername/S/3200&jenc=MacRoman&jloc=en&cpg=1404&clnt=002&lang=sk
Please help me!
Vlad

Hello Vlad,
for using SAP GUI for Java on Mac with Slovak language, you need the codepage conversion files 14011407.CDP and 14071401.CDP, otherwise RFC calls to the SAP GUI will cause unexpected behavior including ABAP dumps.
For explanation how to generate those files and make them available to SAP GUI, please refer to [note 53665|https://service.sap.com/sap/support/notes/53665]. Alternatively to setting the environment variable, you can copy them into the SAP GUI folder. But then you will need to add them every time you install a new version of SAP GUI for Java.
Best regards
Rolf-Martin

Windows 8 installation failure with German language pack

Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}

Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information

Exchange Server 2010 SP3 Installation with UM Language Pack Error

Hi All,
Kindly help me in this issue, When I Install Exchange Server 2010 SP3, I faced an error in UM role setup as the below,
and when i searched on it i found solution like "Download the UM language packs and tried to install directly" so i downloaded "UMLanguagePack.en-US" from the below URL:
http://www.microsoft.com/en-eg/download/details.aspx?id=36769
and when i tried to install it, i faced the below error:
also i searched on this error and i found solution in registry as the below:
Try remove registry key for the above error :
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange\<Your Version >\UnifiedMessagingRole\LanguagePacks"
and after i did it, i found first error be solved and the second error still the same as the below:
Error:
A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just
this role, or remove the role using Control Panel.
Is there a solution on this issue please i wanna solve it As soon as possible?
Thanks in advance,

I solved the below error by editing in registry:
Error:
A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just this role, or remove the role using Control Panel.
Solution:
Open regedit (Start -> run), navigate to the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14
Under each role, UnifiedMessagingRole, have a look for an action and watermark entry, Delete these 2 keys, and retry. it solve this error, and You can now run the installation again of your "UMLanguagePack.en-US". and its done and installed now.
After "UMLanguagePack.en-US" Installation, i tried to continue installation of Exchange Server 2010 SP3, but I faced the same first error in UM role setup as the below,
What can i Do? please help urgently.

Deployment with mutiple Language Packs

Downloaded a few language packs, copied the files into my Office 2013 folder saying No to overwriting files.
Created an MSP, and then created an XML file with the following:
<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />
<AddLanguage Id="match" ShellTransform="yes"/>
<AddLanguage Id="en-us" />
<AddLanguage Id="fr-fr" />
<AddLanguage Id="de-de" />
<AddLanguage Id="it-it" />
</Configuration>
I get the following error when I run setup /config MyFile.xml :
Setup can't find or validate an installation file.
Any ideas?

Where are you running the install from? Network share, SCCM, GPO?
Usually I see this error when Office doesn't know the path of the file -- you might try adding %~dp0 in front of both setup.exe and MyFile.xml, so it becomes
%~dp0setup /config %~dp0MyFile.xml
Hope that helps!

Problems with Polish Language Characters

I'm using version 5.5 of Output Designer.
I've included Arial CE as a softfont in designer. I can successfully display polish characters in a text field on my template, for example Wysyłka.
When I run a Test Presentment, the text fields from my template still display properly in the resulting PDF file.
However, the polish characters from the merged data in an fnf file get substituted with other characters.
For example, in the fnf file I have
^Field zloty
dwadzie
ścia dziewięć tysięcy dziewięćset pięćdziesiąt siedem
which becomes
dwadzie oecia dziewiêæ tysiêcy dziewiêæset piêædziesi¹t siedem
in the PDF.
I have the field set to Arial CE font. I've also tried running the Presentment with my Windows set to Polish but it didn't help.
Any suggestions would be appreciated.
Lynne
Message was edited by: LynneWilson
(Sorry....the example Polish text lines should all be on just two lines, but everytime I post it gets changed!)

Unfortuantely when it comes to fonts and such, I am more of a Mac guy in that regard and have never had to deal with font issues on any of the Windows machines I have use or currently use. Perhaps a Windows guru will come around soon and assist?
I know that when I put in characters that my Mac displays properly and then take that to a PC I often get squares, like the ones below in my system info. On my Mac those show up as little Apple logos. On my work PC they are just squares. Which is why I suspect a font issue.
Patrick

Setting the item for globalization with application language derived...

Hi guys,
i would like to try translation based on item preference.
I've these settings.
Application Primary Language: italian
Application Language Derived From: item prefercence (english)
I've tested the translation with browser settings and it works.
Now i want to have a fixed language.
How can i specify this item?
For example i want a static global var containing the language called CUR_APP_LAN
Wich value i have to assign to CUR_APP_LAN and where i say to apex that it has to use CUR_APP_LAN for translation?
Thanx a lot.

You have to create an item (application item) named FSP_LANGUAGE_PREFERENCE and set its value to 'it'.
Scott

Problem with text direction in table component for text with two language!

Hi,
I want to display text in table component by binding to the one property,and also the language of this text is farsi that must be in the RTL direction.
so i defined a direction in style of staticText component in the table.
when the text is only in farsi language ,it works correct but when the text has one or more words in english language ,format of the text changed and the words moved in text.
thanks

I can not understand relation between COM and HTML elements .
can you elaborate more ?
All HTML elements are accesable via DOM in browsers.
Indeed to change an element attribute in html files (in browser without server interaction) we use scripts to access DOM tree and then we change the element attribute.
for example when you write
document.forms[1].submit()
you accessing the element using DOM tree.
About Farsi problem , I think there is no solution for this problem , as you may know , when we mix RTL and LTR languages in one element text attribute , we have no control over its appearance.
If i understand your post , you want to show both rtl and ltr in one static Text , which is not doable in simple manner.
At least i can not offer you a simple way to solve this.

Acrobat 9 installed on Windows 8.1; upon Save, error every time: "The Organizer Database is damaged and will be reset..."; no "Organizer90" file found (to be deleted, as www suggests for solution with XP, VIsta, 7)

I've installed my old faithful Acrobat 9 Pro on my new Windows 8.1 computer. The program works, but every time I save the document, it tells me "The Organizer Database is damaged and will be reset. Quit the program and close all browsers." (Something close to that text.) I've entered the error online, and a solution does appear for XP, Vista, and Windows 7. It tells me to have Windows Explorer show hidden files, and then look for "Organizer90" within Users/[me]/AppData/LocalLow/Adobe/Acrobat/9.0, and then delete that file -- which will make Acrobat generate a new one. But there is no such file there. Please help with alternate solution. NOTE: When I "Check for Updates" in Acrobat, I'm told that there are no updates available at this time, but also told: "Please note that some updates for the following products cannot be determined at this time: Adobe Updater." Seems like things are out of whack.

Thanks for help. Difficulties continue: When trying to install 9.5.5, I'm told it can't install because the program may not be on my computer, or may be the wrong version. I'm told to check that the program exists. The installed version (9.0) is totally legit, my serial numbers, etc., I've used it for many years. Automatic update seems to be on, but I downloaded Adobe Updater to be sure. Seemed to make no difference. Program does function, but not perfectly. Under "About," it calls itself 9.0, so it would not seem that auto update is taking place. Acrobat on previous machine (Windows Vista) indeed calls itself 9.5.5. (It was installed with same 9.0 package, and presumably updated itself to 9.5.5 over the years.) So summary of current problem: Acrobat 9.0 won't upgrade to 9.5.5 on Windows 8.1.

Why defining Interface for singleton with getInstance() doesnt work?

Lets say I want to do the following:
package adapters
    public interface IAdapter
        function init():void
        function getInstance():IAdapter
package adapters
    public class DAAdapter extends EventDispatcher implements IAdapter
        private static var _instance:DAAdapter;
        public static function getInstance():IAdapter {
            if(!_instance)
                _instance = new DAAdapter();
            return _instance;
        function DAAdapter(target:IEventDispatcher=null)
            super(target);
     public function init() {}
I getting:
1044: Interface method getInstance in namespace adapters:IAdapter not implemented by class adapters:DAAdapter.
Why?

In AS3 you cannot use interface definitions for static methods.
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/statements.html#static

Multilingual www interface for WRT54GL (with polish language pack)

Similar Messages

Maybe you are looking for