Multimedia Audio contrlloler is not installed properly due to an exclamation mark in front of it.

Hi,
I have a Windows XP SP3(32Bit) installed on a Desktop Computer with a PIII processor, and 512MB of RAM.
My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter installed. As a result, I would not be able to run the Intel  Audio Card Reader a web-based applet that identifies my Audio Card and finds the latest audio
driver for my Audio adapter.
I have Multimedia Audio contrlloler driver installed improperly since an exclamation mark is shown in front  of it in the device manager.
This is Hardware ID (PCI\VEN_8086&DEV_24D5&SUBSYS_97611849&REV_02).
I have tried to download the driver from
here:
However, I don't know which one of them I should download since there are
quite a lot of them, and there aren't classified as to 32-Bit, and 64-Bit versions of Windows Systems.
Thus, could you please help me to decied which one I could choose.
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
It seems to be a soundMAX card in which case this file should work for you - http://www.mediafire.com/download/lo5nyw2utm2/SoundMAX_Audio_V510X6480_XP.zip
** Note, this file has not been tested by me personally - Please ensure you scan with AV post and prior extracting the ZIP, If it does not look right, do not install **
Its next to impossible to find vendor sites with the original drivers for this age of hardware.
Regards,
M
If you find my information useful, please rate it. :-)
Thanks a lot,
Martin G. Evans.
According to the screen shots above, the Hardware ID is: PCI\VEN_8086&DEV_24D5..
The vendor ID of Multimedia Audio Controller  is 8086 and the device ID is
24D5.
I WAS EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE  DRIVER. HOWEVER, NEITHER YOU, NOE ME FOUND THE APPROPRIATE DRIVER. 
I don't think that driver given is the appropriate driver since
I have tried downloading, and installing a soundMAX card  driver. However, I found these things:
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio is installed well. As here:
The motherboard model is:
Belarc Advisor Computer Profile:
Operating System System Model
Windows XP Professional Service Pack 3 (build 2600)
Install Language: English (United States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16 ص
Boot Mode: BIOS (Secure Boot not supported) Enclosure Type: Desktop
Processor a Main Circuit Board b
3.00 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Hyper-threaded (2 total) Board: 775i65G.
Bus Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00 03/20/2007
Drives Memory Modules c,d
39.99 Gigabytes Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive 0, rev 05.03E05, SMART Status: Healthy 504 Megabytes Usable Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is Empty
Local Drive Volumes
c: (NTFS on drive 0) * 20.98 GB 14.16 GB free
d: (NTFS on drive 0) 19.01 GB 15.33 GB free
* Operating System is installed on c:
Network Drives
None discovered
Users (mouse over user name for details) Printers
local user accounts last logon
عايض لرضي 19/01/2015 10:59:17 م (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None discovered
Controllers Display
Standard floppy disk controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller] None discovered
Bus Adapters Multimedia
Intel(R) 82801EB USB Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller - 24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD None discovered
Virus Protection [Back to Top] Group Policies
Norton AntiVirus Version 18.1.0.37
Virus Definitions Version Not Up To Date
Realtime File Scanning On
None discovered
Communications Other Devices
↓ Realtek RTL8139 Family PCI Fast Ethernet NIC
Status: Cable unplugged
Dhcp Server: none responded
Physical Address: 00:19:66:1F:F7:54
USB Human Interface Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days (mouse over last used for details) Hosted Virtual Machines (mouse over name for details)
Last Used
SanDisk Cruzer Blade, s/n 4C532000020502112303, rev 2.01 19/01/2015 09:32:57 م*
USB 2.0 USB Flash Drive, s/n 59309e92e21612, rev 0.00 09/01/2015 12:29:17 ص*
* Possibly used again before the reboot following this time. None discovered
See your entire network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.

Similar Messages

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

    Turned my Dell running windows 7 off 2 days ago. Turned on today.  Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
    All my albums are there but won't play.
    Deleted Itunes and reinstalled. Same as before.
    Any ideas ??

    Hey MrCurwen,
    I was able to find an article that included the same error message you're experiencing:
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    Cheers,
    David

  • Song did not install properly and now won't play

    I pre-ordered an album, and when it came round to installing it, I was in an area with a weak internet connection. At one point during installation, the internet signal temporarily cut out, causing the song to not install properly. I have a few seconds at the beginning of the song that has the audio in it, but after that the song stops and does not play any more. I need to know if there is a way to reinstall the song, or redeem it some other way. I have tried to create an AAC version of the song, but an 'unknown error (-3)' message appears. Is there any way I could reinstall that one song?

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
    If you aren't in a country where you can re-download music (or if it re-downloads with the same problem) then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • A few weeks ago I had to reinstall itunes on my PC because the latest itunes update did not install properly.  Ever since doing that something called Mobile Me keeps popping up whenever I open email (outlook) and slowing it down. How do I remove MobileMe

    A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it.  I was able to reinstall itunes and it works fine including syncing with my ipod.  However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program.  This a nusance and really slows down getting to my email.  From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes.  I can't find a way to remove this MobileMe from my PC.  I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it.  Any suggestions on how this can be removed?

    Do you have a backup that you can restore from? Your old hard drive seems to be the problem.

  • After the last update for OSX 10.9.5, I get messages stating that I need to re-install the update because it did not install properly - How do I do this

    On September 24, I got a message from the App Store saying there was an update of the Operating System on my MacBookPro laptop - OS X 10.9.5 - once I updated it, I got a message saying that there was an error in the update and that it did not install properly and that I should re-install the update.  I have no idea how to do this.  Can anyone help me?

    You can manually download the Combo update if in doubt of the integrity of the OS 10.9.5
    install on top of what you have, backups are always a good idea.
    OS X Mavericks 10.9.5 Update (Combo)

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • Field type TaxonomyFieldTypeMulti is not installed properly when opening Site columns page or saving site as template

    I have a site collection which I am moving from a SharePoint 2013 enterprise server to a SharePoint 2013 foundation server. This all seems fine apart from when I try and access the Site columns page (from Site settings) or when I save a Site as a template
    - both times I get the error: Field type TaxonomyFieldTypeMulti is not installed properly 
    If I look in the SharePoint logs I get the following:
    Unable to locate the xml-definition for FieldName with FieldId '249a1c1a-5a3e-4173-abad-779b01892510
    Any ideas?
    Many Thanks,
    Jenny

    I have re-done the migration from Enterprise to Foundation and now get the following error:
    Field type RatingCount is not installed properly. Go to the list settings page to delete this field.
    However I cannot go to the Site columns page as I get this error so don't see where I can delete this from? Previously I had to delete this field manually from each of the Blog sites but this time there don't
    appear to be these fields to delete - I presume because I disabled all the features relating to this premigration?
    Any ideas?
    Many thanks in advance,
    Jenny

  • "One or more field types are not installed properly" when I try to add a second discussion board web part to a page

    I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
    (one is open to all for comments, and one is open only to the project team to post but everyone can read).
    When I go to the pages for each of the discussion boards, they work fine.
    But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
    I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    Correlation ID: blah blah blah
    I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
    to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list.  I tried doing it from SPD with the same result. 

    I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
    since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
    I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine.  Sorry for the wild geese in my original question.

  • One or more field types are not installed properly. Go to the list settings page to delete these fields.

    Hi Team,
    I have created Administrator -approved Infopath form template to my site and activated same template in CA.
    I have used this template in one of my Form library and i can able to submit the Form with success to the library.
    when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
    I have refered my log files also but there is no useful information in that, please find my logs for your reference.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Logging Correlation Data      
    xmnv
    Medium  
    Site=/sites/Prototypes
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Monitoring                    
    b4ly
    High    
    Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8kh7
    High    
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8sl1
    High    
    DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    General                       
    8kh7
    High    
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Runtime                       
    tkau
    Unexpected
    System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.   
    at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
    ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)    
    at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Runtime                       
    tkau
    Unexpected
    ...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
    w3wp.exe (0x2D7C)                       
    0x3790
    SharePoint Foundation         
    Monitoring                    
    b4ly
    Medium  
    Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
    Execution Time=32.443369199158
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    8jg2
    Medium  
    ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    5pbr
    Medium  
    ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
    w3wp.exe (0x08E4)                       
    0x2C58
    Access Services               
    Data Layer                    
    5pbs
    Medium  
    ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0 
    Diff:0.
    w3wp.exe (0x2D7C)                       
    0x0774
    SharePoint Foundation         
    Topology                      
    e5mc
    Medium  
    WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
    MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
    w3wp.exe (0x08E4)                       
    0x2E24
    SharePoint Foundation         
    Topology                      
    e5mb
    Medium  
    WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
    MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
    Jeeva

    Hello,
    Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
    If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

    Hi ,
    I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
    One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
    StackTrace = "   at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n   at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
    String bstrViewName, String bstrView...
    I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
    public override void Execute(Guid targetInstanceId)
    SPSecurity.RunWithElevatedPrivileges(delegate()
    using (SPSite site = new SPSite(sourceUrl))
    using (SPWeb web = site.OpenWeb())
    //gets the document lib
    SPList listFrom = web.Lists[sourceList];
    //gets the expired documents items
    SPQuery query = new SPQuery();
    query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
    query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
    SPListItemCollection items = listFrom.GetItems(query);
    //if expired items found
    if (items.Count > 0)
    SPFile oFile = null;
    foreach (SPListItem item in items)
    string strfile = item.File.Name;
    oFile = web.GetFile(sourceList + "/" + strfile);
    //oFile.CopyTo("Archive/" + strfile);
    oFile.MoveTo(destinationList + "/" + strfile);

    Hi,
    I think the issue is related to the internal name of the Expiration Day.
    In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
    To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
    We can download the tool here: http://www.camldesigner.com/?p=594
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • "One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

    We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
    worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates. 
    Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
    properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems. 
    On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps. 
    De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
    Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list. 
    Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
    Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
    However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved. 
    Following are ULS logs:
    Unable to execute query: Error 0x81020014
    One or more field types are not installed properly. Go to the list settings page to delete these fields.
    System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.   
     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
    ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)    
     at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
    pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
    Thanks!

    Hi Shrishail ,
    Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
    Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
    you have to uninstall that field types (retract solution) and deploy it again.
    Thanks,
    Ujjwal

  • PLEASE HELP! - when i go to open up itunes this message appears "This copy if itunes is corrupted or not installed properly" If i remove itunes will i lose all my bac ups?

    when i go to open up itunes this message appears "This copy if itunes is corrupted or not installed properly" If i remove itunes will i lose all my bac ups?

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for