Multimedia Audio Control

I installed my Li've 24 bit sound card several months ago and it worked. Six weeks ago it stopped working. Due to other issues, I reformatted the hard dri've, reinstalled Windows Media Center and received two errors with multimedia audio controllers not being installed and of course no sound. I installed the Li've 24 bit driver, rebooted, and now receive one error for the controller and no sound. I uninstalled the controller and rebooted and again I get no sound with a ? next to multimedia audio controller in device manager like always. The li've drivers installed properly in device manager with no errors or ?s. HELP!

I fixed the error multimedia controller by turning off sound card on BIOS - but still no sound.

Similar Messages

  • Hp pavilion a1250n says multimedia audio controller not installed, sound not working (windows7)

    No sound plays with my logitech ls11 speakers. my computer is a hp pavilion a1250n, running windows 7, 32 bit operating system, and a AMD ahtlon(tm)64 x2 dual core processor 3800+ 2.00 GHz
    When i click the speaker icon in the lower right corner, and open the playback devices, it says:
    Speaker: anvsoft virtual sound device, default device.
    When i ran a  troubleshooter, to see if there were any files I should install, i got an error message:
    multimedia audio controller couldnt not be installed, driver not found.
    In device manager, below the sound video and game controlers tab, it says Anvsoft virtual sound device.
    Bellow the other devices tab, it says multimedia audio controler, but there is a yellow triangle exclamation makr over it.
    How can I get sound on my computer? Are there any free programs that are compatible that will allow me to have sound?
    Thanks to anyone who takes the time to read this.

    Hi:
    Click on the link below.  Accept the agreeement.  Download, unzip and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...

  • Multimedia Audio Controller Er

    For some reason after I formatted my hard dri've, the sound card isn't recognized. There is no little speaker in the system tray and no sound options at all. I don't have the driver cd. The model number is sb0220. It is a Sound Blaster Li've 5. Digital. What do i do to get rid of the error and have sound? Thank you.

    I realize that this is an old post but hopefully someone can point me in the right direction... I was trying to clean up my add/remove programs and i had meant to hit the one above but some how i got rid of the Multimedia Audio Controller ... I have SoundBlaster Audigy 2. this card was installed because the computer had come with a sound card built in on the motherboard and kid broke off the end of the plug in the headset/speaker thingie.
    I cannot find my disks (we moved since I instlaled and cant find a blessed thing). How do I get this device working again... Right now its showing up under other devices with big ? ... says Multimedia Audio Controller.
    On my add/remove list it shows the CREATIVE MEDIASOURCE (which was RIGHT below the accidentally removed item) and then much further down I see that SOUND BLASET AUDIGY 2 is still installled. In my Device Manager I have listed the following (Somebelong to that sound card on the motherboard I am sure)
    Audio Codecs
    Intel(r)8280BA/BAM AC97 Controller
    Legacy Audio Drivers
    Legacy Videio Capture Devces
    Media Control Devices
    Unimodem Half-Duplex Audio Device
    Video Codec
    PLEASE tell me how to get this Multimedia Audio Controller reinstalled so I can again use my SB Audigy 2 card (since I cant use the other with that darn plug stuck inside). I have tried to upgrade the SB Audigy 2 drivers but that didnt seem to work.
    I would be most grateful to whomever may be able to help me with this problem!
    Susan Pomeroy

  • Multimedia Audio Controller issues "The data is Invalid"

    can someone please explain to me what that meens and how to resolve the issue?
    Uninstalling and reinstalling has done nothing, roll back drivers has done nothing and also defeats the purpose of updating drivers. This issue began when i was prompted to update drivers, so i did and BANG no more sound.
    All files on the DVD install ACCEPT the WDM drivers which im guessing are pretty important. Everytime they try and install i get a Data invalid message and the typical yellow exclamation mark in the device manager over 2 options. High definition audio and Multimedia Audio Controller.
    This has hppened to me anytime ive ever tried to update drivers, only way i fixed it was to reinstall OS, really not keen to do that anymore, just to install a sound driver.
    Also, they really should not be telling us to update sound drivers, because they never ever update properly,without hassle.
    Using XtremeMusic X-Fi SB04606
    Windows XP
    ASUS P5B Deluxe Wi-FI
    Intel core 2 duo 2.67Ghz
    3Gb's ram
    P.s The sound card was workin before i tried to update teh drivers from the Creative Support Website. I followed instructions there and my sound card is no longer working.

    Hi,
    You might want to attempt the following registry fix. It is strongly recommended to back up the current registry settings and create a restore point before proceeding.
    1. Select Start - Run and type regedit to open the Registry Editor.
    2. Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\P CI and you see a number of keys in the form VEN_xxxx, where xxxx are strings such as VEN_1102&DEV_0004&SUBSYS_00511102&REV_03.
    3. Under each of these folders you will find another folder with a long numerical name. Open each folder and look for the DeviceDesc which matches the hardware you want to install.
    4. Right Click on the VEN_xxxx for that device and select Permissions and then tick Allow for Full Control.
    5. Close Regedit and then continue with the installation of your device.
    You might also want to download the file PNPREG.EXE from www.microsoft.com, and run the pnpreg tool from a command prompt. After downloading the file, select Start - Run and type COMMAND. At the Command prompt, type Pnpreg -l.

  • Soundblaster Live! Platinum, Windows XP SP2 & "Multimedia Audio Controller" w/Yellow Question M

    I am setting up a brand new PC, but using some old trusted parts, like my SB Li've! Platinum, with the Li've Dri've.
    In the past, setting up with Windows XP w/SP never resulted in any problems. I would have the Li'veDrvUni-Pack(ENG).exe file on CD and once I booted to the Windows Desktop, I could browse the CD, install the drivers without incident.
    Enter Windows XP w/SP2 ... this is a fresh install with SP2 slipstreamed into the install media. This comes direct from Microsoft via MSDN Download, and is not a home grown piece of install media.
    When the installation completes, I have sound, but I also have the following:
    In the Device Manager, under Other Devices, I have an entry for:Multimedia Audio Controller (yellow question mark)
    I also have under Sound, video and game controllers, entries for:Creative SB Li've! (WDM)Creative SBLi've! Gameport
    When I launch the programs in the Sound Blaster Li've! group, I get the following:
    a) Audio HQ"Cannot initialize audio dri've. Reinstall audio driver.
    b) Creative Sound Mixer"CeDevcon.dll has returned an error. Mixer will now exit.
    c) Creative Restore Defaults"There were some errors encountered while restorine your soundcard's settings. Some settings could not be restored.
    d) Creative DiagnosticsMixer Driver - FailSoundFont Setting - FailMixer Settings Check - Fail
    d.) Begin Fix"Some files required by Creative Diagnostics are missing or having problems. Please reinstall the software from your installation media.Message Edited by boggsie on 2-06-2004 05:26 AM

    I received the following instructions from Creative Support (via e-mail):
    <SPAN>To clean sweep the SB Li've, please:
    <SPAN><SPAN><SPAN>)<SPAN> <SPAN>go to Safe Mode (restart and press F8 for safe mode).
    <SPAN><SPAN>2)<SPAN> <SPAN>Then go to the Device Manager.
    <SPAN><SPAN>3)<SPAN> <SPAN>To get there in XP, right click on My Computer, go to Properties, choose the Hardware tab and Device Manager button.
    <SPAN><SPAN>4)<SPAN> <SPAN>Now remove all listings for Creative (or any other old audio software) in Device Manager under "Sound, Video & Game Controllers."
    <SPAN><SPAN>5)<SPAN> <SPAN>If you see anything called a MPU40 device, disable that as well (not remove, just right click and disable).
    <SPAN><SPAN>6)<SPAN> <SPAN>Also if you have a category called "Other Devices", remove any sound oriented listings there also.
    <SPAN><SPAN>7)<SPAN> <SPAN>Then go to the Control Panel, to Add/Remove Programs.
    <SPAN><SPAN>8)<SPAN> <SPAN>Find your Creative Sound Card and remove it. Select ALL.
    <SPAN><SPAN>9)<SPAN> <SPAN>After it is finished it will ask you to reboot your computer. <B>Say No</B>.
    <SPAN><SPAN>0)<SPAN>Then go back to Add/Remove and look for any more Creative listings (or listings for any old audio devices) and remove them all.
    <SPAN><SPAN>)<SPAN>Then right click on the Start button and go to Explore.
    <SPAN><SPAN>2)<SPAN>On the left side of the screen, scroll to the top, click on the + by the C dri've. Go down to Program Files.
    <SPAN><SPAN>3)<SPAN>Under Program Files, completely delete the Creative folder, just right click it and delete.
    <SPAN><SPAN>4)<SPAN>Then re-start your computer.
    <SPAN><SPAN>5)<SPAN>After windows is completely up, now reinstall your Creative software from then original installation CD
    <SPAN><SPAN>6)<SPAN>Then the updates we have available for it on our website.
    <SPAN><SPAN>7)<SPAN>It should all go in properly now.
    <SPAN><SPAN>8)<SPAN>Download the driver: Sound Blaster Li've! -Li'veDrvUni-Pack (English) from the link below.http://us.creative.com/support/downloads/

  • Lost Beats Audio Control Panel, Windows Experience Index and HP Power Manager on fresh install...

    HP Pavilion m6-1035dx, product B5S06UA#ABA
    Please help! I installed a 240gb SanDisk Extreme SSD and a fresh install of Win 7 home premium 64-bit OEM. I did not reinstall the factory OS and all that goes along with it. I have managed to reinstall all drivers (it seems) but am having the following problems: 1) I have installed IDT HD Audio Driver sp56953 but it does not provide the Beats Audio control panel, any idea how to get it? 2) The Windows Experience Index will not provide a performance evaluation, something in the system is providing it with an error message when it attempts to rate the system and it stops. 3) I have installed HP Power Manager sp57398 and can bring up the control panel but the changes I indicate will not stay applied, when I bring up Power Manager again it show that no selections are made. I knew this fresh install was going to provide headaches, please help if you can. Thanks.

    I suspect this may all be related to a common cause.
    When updating the windows experience index, what is the error message you receive?
    Has the video card driver been installed? It is necessary for the windows experience index to complete.
    Also, ensure the HP Software Framework is installed.  It is under the Software Solutions category.  
    You did a clean install of Windows 7. Has all the software and drivers for Windows 7 from HP been installed? Here is a link should you need it.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Multimedia Audio contrlloler is not installed properly due to an exclamation mark in front of it.

    Hi,
    I have a Windows XP SP3(32Bit) installed on a Desktop Computer with a PIII processor, and 512MB of RAM.
    My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter installed. As a result, I would not be able to run the Intel  Audio Card Reader a web-based applet that identifies my Audio Card and finds the latest audio
    driver for my Audio adapter.
    I have Multimedia Audio contrlloler driver installed improperly since an exclamation mark is shown in front  of it in the device manager.
    This is Hardware ID (PCI\VEN_8086&DEV_24D5&SUBSYS_97611849&REV_02).
    I have tried to download the driver from
    here:
    However, I don't know which one of them I should download since there are
    quite a lot of them, and there aren't classified as to 32-Bit, and 64-Bit versions of Windows Systems.
    Thus, could you please help me to decied which one I could choose.
    A man should convert his anger and sadness into strength to continue living in this life.

    Hi,
    It seems to be a soundMAX card in which case this file should work for you - http://www.mediafire.com/download/lo5nyw2utm2/SoundMAX_Audio_V510X6480_XP.zip
    ** Note, this file has not been tested by me personally - Please ensure you scan with AV post and prior extracting the ZIP, If it does not look right, do not install **
    Its next to impossible to find vendor sites with the original drivers for this age of hardware.
    Regards,
    M
    If you find my information useful, please rate it. :-)
    Thanks a lot,
    Martin G. Evans.
    According to the screen shots above, the Hardware ID is: PCI\VEN_8086&DEV_24D5..
    The vendor ID of Multimedia Audio Controller  is 8086 and the device ID is
    24D5.
    I WAS EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE  DRIVER. HOWEVER, NEITHER YOU, NOE ME FOUND THE APPROPRIATE DRIVER. 
    I don't think that driver given is the appropriate driver since
    I have tried downloading, and installing a soundMAX card  driver. However, I found these things:
    I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
    However, the Multimedia Audio is installed well. As here:
    The motherboard model is:
    Belarc Advisor Computer Profile:
    Operating System System Model
    Windows XP Professional Service Pack 3 (build 2600)
    Install Language: English (United States)
    System Locale: Arabic (Yemen)
    Installed: 22/03/2013 12:03:16 ص
    Boot Mode: BIOS (Secure Boot not supported) Enclosure Type: Desktop
    Processor a Main Circuit Board b
    3.00 gigahertz Intel Pentium 4
    16 kilobyte primary memory cache
    1024 kilobyte secondary memory cache
    64-bit ready
    Hyper-threaded (2 total) Board: 775i65G.
    Bus Clock: 200 megahertz
    BIOS: American Megatrends Inc. P3.00 03/20/2007
    Drives Memory Modules c,d
    39.99 Gigabytes Usable Hard Drive Capacity
    29.48 Gigabytes Hard Drive Free Space
    COMPAQ CD-ROM LTN486S [Optical drive]
    3.5" format removeable media [Floppy drive]
    WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive 0, rev 05.03E05, SMART Status: Healthy 504 Megabytes Usable Installed Memory
    Slot 'DIMM0' has 512 MB
    Slot 'DIMM1' is Empty
    Local Drive Volumes
    c: (NTFS on drive 0) * 20.98 GB 14.16 GB free
    d: (NTFS on drive 0) 19.01 GB 15.33 GB free
    * Operating System is installed on c:
    Network Drives
    None discovered
    Users (mouse over user name for details) Printers
    local user accounts last logon
    عايض لرضي 19/01/2015 10:59:17 م (admin)
    local system accounts
    Administrator never (admin)
    Guest never
    HelpAssistant never
    SUPPORT_388945a0 never
    Marks a disabled account; Marks a locked account None discovered
    Controllers Display
    Standard floppy disk controller
    Intel(R) 82801EB Ultra ATA Storage Controllers
    Primary IDE Channel [Controller]
    Secondary IDE Channel [Controller] None discovered
    Bus Adapters Multimedia
    Intel(R) 82801EB USB Universal Host Controller - 24D2
    Intel(R) 82801EB USB Universal Host Controller - 24D4
    Intel(R) 82801EB USB Universal Host Controller - 24D7
    Intel(R) 82801EB USB Universal Host Controller - 24DE
    Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD None discovered
    Virus Protection [Back to Top] Group Policies
    Norton AntiVirus Version 18.1.0.37
    Virus Definitions Version Not Up To Date
    Realtime File Scanning On
    None discovered
    Communications Other Devices
    ↓ Realtek RTL8139 Family PCI Fast Ethernet NIC
    Status: Cable unplugged
    Dhcp Server: none responded
    Physical Address: 00:19:66:1F:F7:54
    USB Human Interface Device
    Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
    HID-compliant mouse
    USB Root Hub (5x)
    USB Storage Use in past 30 Days (mouse over last used for details) Hosted Virtual Machines (mouse over name for details)
    Last Used
    SanDisk Cruzer Blade, s/n 4C532000020502112303, rev 2.01 19/01/2015 09:32:57 م*
    USB 2.0 USB Flash Drive, s/n 59309e92e21612, rev 0.00 09/01/2015 12:29:17 ص*
    * Possibly used again before the reboot following this time. None discovered
    See your entire network map...
    click for Belarc's System Management products
    A man should convert his anger and sadness into strength to continue living in this life.

  • Where to buy multimedia remote control for Satellite A100-200 in UK?

    Hello,
    I recently bought a refurbished Toshiba A100-200 notebook from John Lewis, which, due to being refurbished, did not come with the multimedia remote control and so, at the moment, there is a huge hole on the left-hand side where it should be.
    Where can I buy a new one from and how much would it cost?
    Many thanks,
    Ian

    Hi
    > did not come with the multimedia remote control and so, at the moment, there is a huge hole on the left-hand side where it should be
    At the left notebooks side the Express Card slot should be placed!!!
    Express card slot is upper and PC card slot is lower!!!
    The remote controller can be installed in PC card slot!!! Don't mix these both slots!
    But only some models are optional provided with the remote control.
    If you want try to order it from the ASP as suggested above
    Please note that the remote control cannot be used if the notebook is running on battery only!!!
    It must be connected to AC adaptor!

  • How to add a custom multimedia playback control to add a time line of what is being played?

    How to add a custom skin in multimedia playback control to add a time line of what is being played?  As it is being played...
    I need a time line so any part of the what is being played can be found by time, ie at 1 minute and 30 seconds in and continues for 45 seconds out of a 50 minute audo.

    If you're talking about a playback controller within the rich media annotation (RMA) then you need to write your own widget in Flash or Flex, and then place the video and widget files using the multimedia "Add Flash" tool in Acrobat instead of the "Add Video" tool. Aside from a bunch of proprietary code to handle events, commenting and the API (which you can live without for basic play-pause-scrub applications), video RMAs are just an embedded SWF file containing an FLVPlayback component. The skin and the video file itself are added to the RMA as resource entries. You can build your own version and have it display whatever controls you want, provided you know how to write ActionScript!
    If you're talking about a controller that's external to the RMA (e.g. a series of links or buttons elsewhere on the page) then in the past you would use FLV video files and the 'cue points' feature that's built into Acrobat - however Adobe removed the ability to create FLV files in the latest version of CC, so unless you have CS6 or earlier it's a non-starter. Instead you can manually set playback start points using the special "multimedia operations" link action in your PDF - though stopping playback at a defined point is very difficult without FLV cues. For that you're back to writing your own widget.

  • Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

    Hi.
    My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card  with 256MB of RAM)
    Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or  Reader a web-based applet that identifies my GPU or Audio controller
    and finds the latest graphics driver for my GPU, and Audio.
    I have two Windows XP installations:
    Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
    I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
    First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
    and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
    Host Controller in device manager.
    First:  Yes, my motherboard has integrated video, and integrated audio card
    According to the screen shots above, then
    The vendor ID of Multimedia Audio Controller  is 8086 and the device ID is
    24D5.
    The vendor ID of Video Controller  is 8086 and the device ID is
    2572.
    I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE  DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
    Thus, could you please help me to find them?
    I have tried installing a soundMAX card  driver, however, I found this error.
    I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
    However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
    The motherboard model is:
    Belarc Advisor Computer Profile
    Operating
    System
    System
    Model
    Windows XP Professional
    Service Pack 3 (build 2600)
    Install Language: English (United
    States)
    System Locale: Arabic (Yemen)
    Installed: 22/03/2013 12:03:16
    ص
    Boot Mode: BIOS (Secure
    Boot not supported)
    Enclosure Type:
    Desktop
    Processor
    <sup>a</sup>
    Main Circuit Board
    <sup>b</sup>
    3.00 gigahertz Intel Pentium
    4
    16 kilobyte primary memory cache
    1024 kilobyte secondary memory
    cache
    64-bit ready
    Hyper-threaded (2 total)
    Board: 775i65G.
    Bus
    Clock: 200 megahertz
    BIOS: American Megatrends Inc. P3.00
    03/20/2007
    Drives
    Memory Modules
    <sup>c,d</sup>
    39.99 Gigabytes
    Usable Hard Drive Capacity
    29.48 Gigabytes Hard Drive Free
    Space
    COMPAQ CD-ROM LTN486S [Optical drive]
    3.5" format removeable
    media [Floppy drive]
    WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
    0, rev 05.03E05, SMART Status:
    Healthy
    504 Megabytes Usable
    Installed Memory
    Slot 'DIMM0' has 512 MB
    Slot 'DIMM1' is
    Empty
    Local Drive
    Volumes
    c: (NTFS on drive 0) *
    20.98 GB
    14.16 GB free
    d: (NTFS on drive 0)
    19.01 GB
    15.33 GB free
    <center>
    * Operating System is installed on
    c:
    </center>
    Network
    Drives
    None
    discovered
    Users
    <small>(mouse over user name for details)</small>
    Printers
    local user
    accounts
    last logon
    عايض
    لرضي
    19/01/2015 10:59:17 م
    (admin)
    local system
    accounts
    Administrator
    never
    (admin)
    Guest
    never
    HelpAssistant
    never
    SUPPORT_388945a0
    never
    <center>Marks
    a disabled account;   Marks
    a locked account </center>
    Controllers
    Display
    Standard floppy disk
    controller
    Intel(R) 82801EB Ultra ATA Storage Controllers
    Primary IDE
    Channel [Controller]
    Secondary IDE Channel [Controller]
    None
    discovered
    Bus
    Adapters
    Multimedia
    Intel(R) 82801EB USB
    Universal Host Controller - 24D2
    Intel(R) 82801EB USB Universal Host
    Controller - 24D4
    Intel(R) 82801EB USB Universal Host Controller -
    24D7
    Intel(R) 82801EB USB Universal Host Controller - 24DE
    Intel(R)
    82801EB USB2 Enhanced Host Controller - 24DD
    None
    discovered
    Virus
    Protection <small>[Back to Top]</small>
    Group
    Policies
    Norton AntiVirus Version 18.1.0.37
        Virus Definitions Version Not Up To Date
        Realtime File Scanning
    On
    None
    discovered
    Communications
    Other
    Devices
    ↓ Realtek RTL8139 Family PCI Fast
    Ethernet NIC
    Status:
    Cable unplugged
    Dhcp Server:
    none responded
    Physical Address:
    00:19:66:1F:F7:54
    USB Human Interface
    Device
    Standard 101/102-Key or Microsoft Natural PS/2
    Keyboard
    HID-compliant mouse
    USB Root Hub (5x)
    USB Storage Use in past 30 Days<small>(mouse
    over last used for details)</small>
    Hosted Virtual Machines<small> (mouse over
    name for details)</small>
    Last
    Used
    SanDisk Cruzer Blade, s/n
    4C532000020502112303, rev 2.01
    19/01/2015
    09:32:57 م*
    USB 2.0 USB Flash Drive, s/n
    59309e92e21612, rev 0.00
    09/01/2015
    12:29:17 ص*
    <center>* Possibly used again before the reboot following this
    time.</center>
    None
    discovered
    See your entire
    network map...
    click for Belarc's System Management products
    A man should convert his anger and sadness into strength to continue living in this life.

    Dont worry, dont think anyone was as a matter of fact
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
    http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
    http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
    that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

  • Audigy 2 ZS Platinum Pro and Inspire T7700 does not recognize Mic on Audio Control

    Hi folks,
    I decided to hook up my headphone and mic sets to the Audio Control Pod for the first time recently to chat online. I'm not sure if I ever tried this when I bought the Inspire T7700 speaker system, but I cannot seem to get any voice to come through in Windows' Sound Recorder (the headphones work fine). I'm hoping that someone here can help...otherwise, I suppose I'll have to find an alternate solution than using my soundcard system.
    Here are some specs:
    OS: Windows XP SP2 and all current updates
    Soundcard: Audigy 2 ZS Platinum Pro
    Speakers: Inspire T7700 with Audio Control Pod (contains the headphone and mic jack)
    Here's what I have tried:
    . Updated drivers to: SBAX_WBUP2_LB_2_09_006.exe
    2. Tested headsets and mics out on another one of my computers with a SoundBlaster Li've. They work fine.
    3. Set each audio source with full volume in the Recording Control window as the source while recording in Windows' Sound Recorder (I know some of these aren't right, but I tried them all nonetheless):
    - MIDI Synth
    - Line-In 3
    - Line-In /Mic (this should be the one, I think)
    - S/PDIF-In
    - Auxiliary (this might be the one for the Audio Control Pod)
    - "What U Hear"
    - Line-In 2
    - CD Digital
    - Wave
    4. Installed the Creative software from the official CD to manage the audio and speaker settings. Retested the same as item 3 above within this software. Same results.
    5. Disconnected the external I/O hub (since I am connecting to the Audio Control Pod, which connects to the speaker system and then my sound card). Interestingly, the Line-In /Mic input disappeared. All that I saw for an input (I believe) was Auxiliary. I tried even that as noted in item 3, but nothing.
    Has anyone had any luck in getting a mic from a headphone set to work with the Audio Control Pod for the Inspire T7700 speaker system along with the Audigy 2 ZS Platinum Pro?
    Thanks in advance for the help!

    Read the FAQ on top of the soundcard forum concerning SPDIF and digital out. The reason is very easy to find out if you read that. In short: the digital out can only send out a PCM stereo signal (which is why you only get FL/FR sound) and an encoded AC-3 signal.

  • H8-1287 Beats Audio controls do not work in Windows 8.1

    I've upgraded to Windows 8.1 and installed the IDT High-Definition audio driver from HP's website.  The surround sounds seems to be working but the controls do not work to modify the EQ etc.  I've seen the problem has been resolved for Envy laptops but all the links for the software appear to only be for the notebooks and not compatible with my desktop system.  I've downloaded the available software (IDT High-Definition Audio driver) found under my HPE HI-1287 product from HP's support site but the Beats audio control panel doesn't seem to make any sound quality changes.  Hopefully there is a driver somewhere compatible with my desktop system that allows controling the audio properly.  Thanks.

    Hello @KICR,
    I understand that the Beats Audio Console is not adjusting the audio settings on your HP Pavilion HPE h8-1287c Desktop PC running Windows 8.1. According to the HP Pavilion HPE h8-1287c Desktop PC Drivers page there are no Windows 8.1 drivers for your computer. I can only assume that this means your computer is currently using Windows default drivers or Windows 8 drivers and the Beats Audio Console is not able to interact properly with the currently installed driver.
    All I can recommend is that you check back periodically to the drivers page I linked above and see if Windows 8.1 drivers have been created. Other than that your only option at this time would be to use the HP Support document: Using Microsoft System Restore (Windows 8) to restore your computer back to Windows 8 where the Beats Audio Console has drivers that are compatible.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Bearts Audio Control Pannel will not open. Get error message cannot find startup file

    Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
    Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel.  Looked for download to re-install BEATS Audio but cannot find one.
    Any suggestions.
    Sound works with IDT driver installed.
    Pavilion P7-1500Z

    Hi,
    Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
    Recovery Manager - Windows 8.
    Recovery Manager - Windows 7
    After the reinstallation has completed, restart the PC.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Need help removing Creative Audio Control Panel

    So I've been trying to get the Creative Consol Launcher to work with my soundcard again and found that in my "Programs and Features" list in windows 7 there is one item of Creative labs software that I can not remove. It is called "Creative Audio Control Panel" and when I attempt to uninstall it it tells me "C:\Program Files (x86)\InstallSheild Installation Information\{7E96A7F-AFE3-47-87B-583E37639E8}\SUPPORT.Cab not found."
    Whenever I try to use the Creative Console Launcher it tells me "There are no supported audio device[sic] available. You need to close the application. Click OK to close the application now."? I assume it's trying to launch Creative Audio Control Panel which for some reason or other is no longer present on my system but was never properly uninstalled. Also, great work on that error message - seems like Creative needs more proof readers.
    In other words it seems the file I need in order to uninstall this broken program is missing - any idea what I should do? I've tried seeing if I can reinstall the program but I can't find any setup file for it online - all I can find is "Creative Console Launcher" which seems to intigrate a launcher feature into volpannel, but since it doesn't have the Creative Audio Control Panel to actualy launch it just gives me error messages if I want to get into my EAX settings or mixer or anything like that. If anyone knows how I can uninstall/reinstlal this program (in windows 7) I'ld be very greatful.

    Well I believe I have found a solution to my problem and it is manyfold so here goes.
    First off, Creative Customer Support Americas corresponded with me via e-mail and notified me that there are known issues with all PCI cards and Creative Audio Consol in Windows 7 (which is to say they don't work together at all).
    After getting this info I removed my SB 0790 card and plugged in another one I had handy - it's still a SB X-FI Xtreme Audio but this one is has a PCIe interface and a digital audio in/out jack on the back to boot - this card is manufactured not by Creative but by MSI (licenced I assume) and came with my motherboard (good thing I had it laying around).
    Initialy I had the same issue - even uninstalling everything related to creative and re-installing the hotest newest drivers from the site simply wouldn't resolve the issue. Finaly I downloaded a 3rd party program called CCleaner - a freeware utility that can clean up registry errors and delete items off the program list by force if need be (and it was in this case). I used that to completely eradicate Creative Audio Console and Creative Console Launcher, re-installed the latest drivers and audio pack for the PCIe card, and then even had windows update the driver again after that (the result of which was not a new driver version but it did seem to download and install something - no clue what). After all of that I once again had a functioning version of Creative Audio Consol back on my computer - and now it recognizes that I have a valid card installed and I've got access to all the features I was missing. The interface for Creative Audio Console looks a bit different than it used to (no longer a fake looking stero but instead a fairly plane interface) but whatever it's working and that's what I care about.
    Oddly enough with all those installs it never put Volume Panel or Creative Consol Launcher back on my computer, I wound up having to install those off of the MSI card's driver disk to get easy access to the Creative Audio Panel again (otherwise I'd have to either make a shortcut or go straight into the install directory any time I want to launch it - now though I can launch it right through the Volum Panel).
    One persistant issue still remains: In my recording audio device list I am still missing: "What U Hear" but it has been this way since I installed Windows 7 for the first time in October when it releaed, and I have given up hope on ever seeing What U hear again - If I want to record from my soundcard I have a 3rd party freeware utility called "Virtual Audio Cables" that are a bit clunky but get the job done.
    Conclusion:
    Though it may claim on Creative's support page for the SB0790 (Sound Blaster X-FI Xtreme Audio) soundcard that the latest drivers support Windows 7 it is abundantly clear that this is NOT the case. You will manage to get audio out of it, but almost no other creative aplication is going to work with your card or even detect that a valid working SB card is installed. It seems the only aplication I could get working relyably was the auto updator (which was able to see I had the card installed) and Volume Panel. By the admission of Creative Customer Support America, however Creative Audio Panel will not work, and I have observed that Creative Consol Launcher does not function properly either. Indeed even plowing through the file system you'll find support only for XP and Vista versions of the drivers - there is no Win7 specific driver for either this card or it's PCIe counterpart.
    Also don't expect to have access to the "What U Hear" utility - this goes for the PCIe version of the card as well. As ever, it seems the marketing guys are making claims about the card that can't actualy be backed up, sure it's techincaly illegal, but only if your customers are willing to start a class action lawsuit over a 50 dollar soundcard that sort-of works anyway.
    Issue resolved for now - and I am no longer pulling my hair out in frustration.
    Links to the Utilities I used to make my card functional:
    CCleaner
    http://www.ccleaner.com/
    Virtual Audio Cables
    http://software.muzychenko.net/eng/vac.html

  • WoW SB Tap Chat not working, not visible in Creative Audio Control Panel

    I just received one of the new Sound Blaster World of Warcraft Tap Chat foot pedals and so far... it's not been a joy to use
    The problem is that the device does not show up in the Audio Control panel (the creative panel) as a configurable device. I have the WoW wireless headset and it is on and active (otherwise the panel will not display). The Tap Chat is supposed to display on the list of options under Illumination, THX, Game Audio, Key Bindings and then the Tap Chat should be listed.
    I'm running the latest drivers for the WoW headset (1.01.0001). Windows 7 64-bit. The audio control panel lists as version 1.00.05 (in the panel about screen).
    During installation (reinstallation actually trying to fix the problem) the Tap Chat pedal is listed in the registration application, so I know it's installed correctly and IS visible to SOME creative apps (ie the registration app, not very helpful) but not the audio control panel.
    I think it's either 1) the panel is an older version and does not know about the pedal (even though I've updated to the latest) or something else is fishy.
    Help welcome!
    Thanks,

    I've already called your support group. They didn't even know that the product EXISTED. Nor did they have any idea what the problem is.
    It's pretty obvious the problem is due to the device not being detected on 64bit systems (yes, I can see the device on a 32 bit machine).
    So if anyone has Windows 7 64bit they are probably going to be sadly dissapointed with this device.
    Also configuration only works if you have the WoW headset plugged in... which is really odd considering you don't need the headset to use the device once configured (you can use it anywhere without drivers since it is essentially a keyboard with only one key).

Maybe you are looking for

  • Partner bank field in Credit memo thru MIRO

    Hi I am trying to post credit memo related to MM invoice in transaction MIRO. I am getting error select partner bank out of multiple partner bank but the field is not available for selection. The same is avaialable for input in invoice though. Not co

  • How to get a scroll bar to the applications popup by default?

    How to get a scroll bar to the applications popup by default when clicked the applications folder from the dock? If I have so many applications that they do not fit in the default area, I have to find out myselft that I have to scroll the content bef

  • N72 giving error while opening Gallery

    I m facing problem while opening Gallery. It is giving an error "Database corrupted. Some data might be lost". I think prblem is with memory card. i m able to store data in memory card but cant view it. Even i m not able to open memory card section i

  • Best new MAC-PC Mixed Network

    My wife, the artist, wants to get a new iMac and share a network with my WinXP PCs. TC might be a nice solution. However, from what I read, there seems to be doubt about some connections. We want to follow the Apple model and can wait until such a mo

  • ITunes and Apple TV 1

    Two yaers ago, I paired my Apple TV1 with my IMac, and it worked very well. I updated ITunes to the last version and have now "Mountain Leopard" OS. After a reset of my Apple TV1, I tryed to pair it again. Apple TV1 gives a number. On my IMac, I have