MultiMedia Center for Think Offerings install issues with Vista

Hello,
I recently upgraded my ThinkPad Z60m to Vista by doing a clean install from disk. Since this process involves manually installing each of the ThinkPad utilities manually (no pre-built image for Vista, only XP), I have ran into some issues with the installer for the MultiMedia Center for Think Offerings.
According to the Support & Download page, there are two downloads available for the Z60m and both have issues (or errors) that are preventing me from installing the application. Below are the two products and reasons for not installing:
"MultiMedia Center for Think Offerings for Windows XP and 2000"
Problem: Does not install on Vista
Error message: "Could not open \device\physicalmemory"
"MultiMedia Center for Think Offerings for Windows Vista"
Problem: ThinkPad Z60m is not a supported
Error message: "This program is not for machine type 2529EAU"
What I am looking for is an installation of MultiMedia Center for Think Offerings that supports users who have upgraded from XP to Vista (or downgrade depending on your feelings of Vista ). I have not found anywhere saying that upgrades from XP to Vista are not supported, so I should expect that software updates should be available for ThinkPad products on either platform.
Thanks in advance for your help.

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

Similar Messages

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

Unable to install Multimedia center for think offerings on T400

I have tried to install the CD burning software on a T400 with XP Pro unsuccesfully, at each attempt I get the message: "Setup has encountered a problem and needs to close".
Also I have noticed that the software downloads page does not include the install for the burning software.
the only recent version that I had no issues with has been with the T61.
would appreaciate any help or direction in resolving this issue.
thanks
-Ron
Message Edited by RONRAM on 03-04-2009 07:34 AM
Message Edited by RONRAM on 03-04-2009 08:48 AM

I have Roxio Creator Business Edition 10.1 installed on my Vista32 preload for T500 manufactured December 2008 but I have no cbed folder in C:\SWTOOLS\APPS. Where is it? Content of my APPS folder:
ALRN
AMSG
cameracenter
css
DVDPlay
FlashPlayer
leaderTech
MBLCTR
MUIInstaller
MULTILANG
PCDRWIN
PRDCTR
rec_burncd
rnr
RnRTVTs
SUN_JRE
tvsu
utils
WiMAX Tutorial Video Gadget
WWAN
ps When I find it, will it and MyDVD install on Vista64?
Message Edited by zilla on 2009-05-07 06:10 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

.VFO350....how do I install software with Vista

Hi all,
Have the Creative VFO350 and after getting the laptop/notebook cleaned back to factory settings my webcam now won't work. Tells me I need to install software (have no software CD) but I see that there might be compatibility issues with Vista. Any help would be greatly appreciated.

Hello Spuds,
Welcome to Creative Forums!
You can download the driver from the support page. Here's the link.

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

For all those having issues with the 11.1.4.62 update

The issues encountered are vast... msvcr80.dll issues.. Apple Mobile Device failed to start... and on and on... Never understand how a simple update can completely screw up everything and make iTunes unusable.
Go into Programs and Features and ANYTHING that says "Apple" with something after it, uninstall it.
Reboot
Download a fresh copy on iTunes
Right click on iTunes64Setup.exe left click on Run as Administrator. Even if you're only use on your computer and it's an Administrator account do it.
Cross your fingers, throw some salt over your shoulder, say a prayer. If the install completes with no error measages you're done.
If you still get the msvcr80.dll error
Google How to use scannow Windows 'Whatever Version you're running'
This will check the integrity of your system files.
If everything checks out you need to replace the missing dll file
Use Google again for Missing msvcr80.dll
I had to put the dll back in Windows/System32/ for iTunes to install properly.

I am running the 32-bit version of Windows 7.
I too, encountered these problems when attempting to update.
I began the update from within iTunes. It got past the download phase, but during the installation phase, for the first time ever, I encoundeted an installation failure. It told me to try again, but if it failed, to download the standalone file and install it manually. Unfortunately, though, the (failed) installation still managed to have gotten far enough along so as to leave my machine in a state that I could no longer launch iTunes.
When I tried to launch, I received the missing MSVCR80.dll--just like others have reported. I tried to install this "missing" file by downloading the Microsoft Visual C++ Redistributable (I forget which one, as there are several flavors, but "SP1" and "MFC" were part of the descriptive name from the Microsoft Download Center). DO NOT, under any circumstances, TRY TO OBTAIN THIS MISSING FILE FROM ONE OF THOSE WEB SITES OFFERING THIS (or other) FILE(s). Most if not all of these sites, are likely malicious in nature.
At-any-rate, while I ran the installation of the vcredist_x86.exe file, I briefly saw some form of positive progress, I never seemed to get a definitive completion (i.e., nothing told me the install completed successfully). Nor did I see any error message. I also tried a .NET Framework 4.0 repair as this suggestion was also offered elsewhere on the Apple iTunes Forum. Unfortunately, neither of those suggestions solved my problems, as I still continued to receive the missing MSVCR80.dll message, and iTunes would not launch.
I then followed the directions found elsewhere in this thread by uninstalling the Apple applications (in the order listed), rebooted (and for good measure) I also ran ccleaner after the system came back up), and tried the install again using the iTunesSetup.exe file (RunAs Administrator option).
During this attempt, now I received a DIFFERENT error message: Specifically, the Apple Mobile Device service could not be started. Attempting to start it manually from the Services panel, wouldn't work, either. I told the install to "Ignore" this error, and even the installation made it to the end and stated the installation was successful, it definitely was not.
The Apple Mobile Device error encountered during installation mentioned ensuring there were sufficient permissions. As the installation was performed using the RunAs option, this should have used Administrator permissions. Still no dice, however. So I completely uninstalled everything again (in the order specified). Rebooted. This time, I also manually removed directories left behind in C:\Program Files\Common Files\Apple directory.
I kept any plugins that existed, but dumped all of the *.resources files I could find. They all had today's date on the file directories, so I knew they'd been "touched" by the various installation efforts--and who knew whether something left behind might be causing issues. I blew these away since it got left behind by the uninstall operation (a major annoyance these applications don't do a better job of cleaning up after themselves when "removed").
Did the same sort of thing in C:\Program Files\iTunes. I also Re-ran ccleaner (again), and rebooted one more time, as there was still some reference in Registry to APSDAEMON.exe, which, now, no longer existed, but was still trying to be started via the entry in HKLM\Software\Microsoft\Windows\CurrentVersion\Run. Found the entry and simply deleted it, which kept me from getting that paticular error at restart.
Last, but not least, I downloaded the FORMER version of iTunes from Filehippo, since they keep all of the previous versions. Apple might do that, too, but I didn't know for sure, nor did I know where to find it, whereas, I knew exactly where to get this from Filehippo....
Right, wrong or indifferent--that's what I did. I know some might not recommend obtaining a file from a source other than the company creating the application--especially since this seems to fly in the face of my own recommendation about sites that offer missing files. While similar, it's not quite the same, and I've had good success with Filehippo. A risk I was willing to accept....
I ran the installation file for 11.1.3.8, and voila: iTunes (the former version not the ill-fated new one) was reinstalled (no error messages during installation); best of all, no missing MSCVR80.dll file upon application launch.
While others seem to have gotten success by removing the apps and reinstalling, I, on the other hand, did not.
Therefore, I will now sit tight at my current version level until Apple better addresses this issue, which, is definitely tied to the new update, as the former version works just fine.
I share this, just in case others, like myself, followed the directions and still had the problem. At least, by visiting Filehippo, one can garner the previous version, and in so doing, re-establish a working version of the application. If Apple provides former versions for download, then, by all means, obtain the file from them. My method was more expedient at the time.
Shared for whatever it is worth.
Good luck to folks who experience this issue.... Hope you either get the matter solved, or you, at least, get back to a version that worked before your parade got rained on....

Audigy 2 ZS Distortion Issues With Vista - See if this solution works for you guys

First of All Creative - It's sad, really sad that you really haven't supported your customers. As such a big maker of excellent products, I'm disappointed to know that you have barely provided driver support to your customers. I've been buying Creative products since 1997 - Also - I purposely upgraded my sound card on my Hp Media Center to an Audigy 2 ZS. Secondly - I formatted my computer and re-installed Vista. Before that, the sound card i.e. the sound worked fine (after a lot of trial and errors with different drivers, i somehow managed to get it working without Snap, Crackle and Pop Issues. In other words, I experienced distorted playback when I first installed Vista. Now that I re-installed Vista - Everything installed but as usual - only issue: Yup, you guessed it right.
Creative Audigy 2 ZS Infamous Snap Crackle Pop (SCP) I did try k_daniels drivers and even though I applaud for his efforts - unfortunately it didn't work for me but i'm sure they would if you did the following - ) Uninstall all Creative Drivers Using Driver Sweep2) Do not install the driver through Windows Update (did not work for me)3) Install latest drivers from Creative or K_Daniel's Package4) Install Vista Codec Pack5) Install DirectX06) Then do the following: Got this sorted. Hope it works for everyone..found the answer searching Google.
Right click VOLUME icon in taskbar
Click PLAYBACK DEVICES
Right click SPEAKERS
Click PROPERTIESClick ADVANCED Make sure there's no tick marks in any of the options there including ENHANCEMENTS.
This should sort it. [After doing all this, I have no sound issues whatsoever - Crystal Clear Audio Quality but still not better then XP] I am planning to try K_Daniels pack with all the extra applications and I'll post later on in regards to my experience with the pack. Good Luck P.S: Hope this helps somebody because doing all that helped me get back the audio clarity I was looking for without any distortion whatsoever.

Hi xmins
Im not using a decoder, only an amplifier alone with two speakers ... My cable is plugged in line out , and then plugged on line in of the amplifier.
The distortion is very audible, in HL 2, Battlefield 2, etc
When got a explosion, a shot from shotgun, missile, the sound comes distorted ...
Any more hints?

APEX Listener 1.1.4 install issue with listener configuration

Oracle XE 11gR2
APEX 4.1.1
APEX Listener 1.1.4
Glassfish 3.0.1
=============
Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
Any ideas?

Hi,
(1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
(2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
But perhaps the error disappears as soon as you also get a proper configuration page.
-Udo

Microsoft ERP MA (3.3.1077.2) for SAP and compatibility issues with SAP 6.0

Hi all,
I want to configure the ERP MA (3.3.1077.2) for SAP on ILM 2007 in order to synchronize passwords between AD and SAP. I have several instances of SAP. The SAP versions are as follow:
SAP ECC 6.0 7.00 - 64bit
SAP ECC 6.4 7.01 - 64bit
SAP BI 7.1 7.01 - 64bi
I was wondering whether there are compatibility issues with any of the above mentioned versions.
Your feedback is appreciated.
Regards,

Did you install a Java machine JRE ? If no, when you do the drag and drop you have the popup but it does work
[http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html |http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html]

Vertex install issues with 46C - RFC setup?

Dear Fellow SAPoniSeries'ers,
We have installed the Vertex Q Series tax software with our SAP 46c implementation and we are having issues with the Remote Function Call (RFC) setup. We know that Vertex and SAP programs need to have the same "signatures" for the LIBRFC service program, and when we finally figured that out, but now we get the following message for the VERRFC but the RFCTEST works ok;
"time out during allocate /CPI-C error CM_PRODUCT_SPECIFIC_ERROR"
It appears that the RFC is trying to run as it does not immediately fail. VERRFC and RFCTEST are both now bound to VERQSU/LIBRFC service program.
We have upgraded to the ASCII database format, we are running OS/400 V5R3 and the Vertex software is Translink 2.0.22.
I would GREATLY appreciate any advice or lessons learned.
THANK-YOU!
Tim Murphy
Nalge Nunc International
Rochester, NY USA

Tim, I don't recall just how we fixed this, but we had the same isses. Here is a cut/paste from an email I have from Vertex...this is a bit old, but may give some insight:
In the past, we have encountered issues when customers upgraded their SAP
Kernel on the AS400 (ex: going from LIBRFC 44 to LIBRFC 48)with a different
version of the SAP service program. For convenience Vertex started
providing a backup LIBRFC file in the event a problem was encountered that
caused calls to Translink (VERRFC) to fail because of incompatible or
unmatched signatures in a newer release of SAP's LIBRFC.
We have also encountered similar issues when upgrading Translink, as you
became aware when you applied your recent Vertex 3.0 & 3.1 upgrades.
Because we need to be compatible with various releases of R/3, we provide a
renamed copy of SAP's LIBRFC that we used at time of binding. This file is
LIBRFCBCK.
In the event of a signature violation, the Vertex LIBRFCBCK can be renamed
in-place to LIBRFC and Translink will find this version of the Service
Program first. Translink (VERRFC) will always look locally for the file. If
not found, it will find the one SAP provides in the SAP instance and
attempt to use it.
Volker, we use Vertex, issues with ASCII, ECC6.0?

Install issue with CD drives / and burning

I am running Windows Vista 64 on a new computer I built (latest ASUS P5K-E with a quad Q6600 cpu and 4gigs of RAM). I transferred all my music and installed iTunes. Everything is working fine except for the burning of disks. It did give me a prompt at the end of the iTunes install and on first startup that there may be a problem recognizing the CD drives. However, there is no problem importing music on those CD/DVD burner drives -- but I cannot burn on those drivers. I can burn using other software on these drives -- no issues with the drives at all. Under iTunes "Preferences", and 'Burning' it states "No supported Disk burners found". Both are Lite-on CD/DVD burner drives and less than a year old -- and of course worked on the old XP computer with iTunes. I have uninstalled, reinstalled iTunes -- no luck. Any ideas? This looks to be something in the Registry on install, but not sure what to do. Any help appreciated.

You may need the CD Configuration folder too, after you install the drivers.
Here is the CD Configuration folder, with the Files you need Just Unzip it and place the CD Configuration Folder into Your C:\Program Files (x86)\iTunes Directory
http://stahlhammer89.com/apple/CD_Configuration.zip
I had my friend with Windows Vista x86 Install iTunes and give me the Folder and Files I needed.
Hope this helps you

Hi. New iPad Air for Xmas. Intermittent issues with Safari closing suddenly or just suddenly opening App Store on a second tab. HELP!

Hi
There is an intermittent issue with either Safari just closing suddenly (looking at other discussions, believe this is to do with the RAM - wish this had been mentioned in at least one review of iPad Air I investigated before purchasing) however the most irritating issue is this constant 'jumping' from whatever I'm reading to the App Store which has been just automatically opened on another tab.. App Store is either showing William Hill app (never looked at or downloaded this) or on some occasions, some random game app which again, I've never looked at or downloaded... (I've checked the pages I've been reading & none of these are pop-ups or ads on these pages either...)
Any ideas?

I have this issue too. I don't think it's a problem with anyone's iPad or iPhone, it's internet advertisers who have worked out how to automatically trigger sending a person to the App Store just by loading a web page. I've seen William Hill and various games come through on the App Store with this technique.
This could mean Apple have no protection in Safari for preventing redirects to the App Store without a user specifically triggering it (like the way pop-ups used to happen before pop-up blockers were invented). Although I suspect that Apple wouldn't be that blasé about that sort of thing. More likely I think is the advertisers are binding a page event like onscroll which shouldn't allow this but was perhaps overlooked by Safari's developers. Apple need to make an update to Safari to prevent anything but ontap/onclick events from opening the App Store.
You should perhaps consider banning apps on the App Store using this advertising technique. They'd soon start behaving if they thought their app could be de-listed!!!

Install issue with CS2

A customer service rep recently directed me to the CS2 download on the Adobe website as a replacement for my CS install. I got all the files downloaded and followed the installation instructions on the PDF from the download link. However, the install keeps hanging up when it asks me to insert disk 2. I already have disks 2 and 3 unpacked and saved on the C drive per the instructions. How do I get past this?
I am running a 64-bit version of Windows 7.

Hello Paul,
CS2 was good to go in 32-bit XP.
64-bit XP came out after CS2's release.
Adobe TechNotes identify that CS2 could be installed & run in XP 64-bit but that CS2 was not certified on that environment.
Only CS 3 and CS4 were tested for Windows 7 support.
Adobe identifies that older products may install/run but that they were not tested on Windows 7 and will not be updated.
Acrobat 7 and Office 2007 -
Acrobat 7's PDFMaker is not compatible with Office 2007.
See: http://blogs.adobe.com/pdfitmatters/2008/12/version_compatibility_of_acrob.html
Widows 7 -
Acrobat 9.2 and Adobe Reader 9.2 are required for compatibility with Windows 7.
See: http://www.adobe.com/products/acrobat/faq/
In context of Windows 7 and Adobe applications, the discussion at the link below is informative.
http://kb2.adobe.com/cps/508/cpsid_50853.html#tested_apps
Be well...

App-V 5 SP2 install issue with Intel NIC Driver 11.16.96.0

When deploying App-V 5 SP2 using SCCM 2007 it will install with no problem on the machine. However, when the user reboots after the install the machine will blue screen. The user then reboots again and machine comes up to the desktop. However,
the App-V service is not running and is still set to automatic.
Looking at the Blue Screen dmp file the common theme looks to be a conflict with an Intel NIC driver version 11.16.96.0. Machines running an older version of the driver do not experience the issue with the blue screen after reboot and the App-V service
starts with no issues.
Has anyone seen this issue before?

Version 19 appears to be the latest: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18713&lang=eng&ProdId=3025
Have you tested with this version instead?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

[FIX] Alchemy Install issue with layout.bin [F

All you have to do for Alchemy to install is close xfire, wait a moment, and install. Xfire is evil. Thanks,?turkey22

Sorry for reactivating this threat. I found an other way as a workaround.For that you'll have to activate the administrator account in Vista and then to log in as a administrator. It does not help to make a right click with the option to "start as an administrator". You'll definitely have to log in as the administrator at once. Then the setup runs smooth. To change that go to your computer administration under "System" and "maintenance/administration". There go to "local users and groups", now take the folder "user" and then "administrator". Uncheck the field "account deactivated" and then reboot. Now you should be able to log in as administrator with the password you already used before.Please excuse If some names (points) are not 00% correct. I translated everything from my OS which is set up in German. Greetings?LekutoMessage Edited by Lekuto on 08--200704:06 AM

MultiMedia Center for Think Offerings install issues with Vista

Similar Messages

Maybe you are looking for