Multimedia Controller, code 28

Hi,
I use a Qosmio F45-AV412, running on Win 7 (recently re-installed).
The system notifies me that there's no driver, on my computer, for the Multimedia Controller (code 28). I have tried to run the automatic update but Windows was "unable to find software" for my device. I have tried to uninstall the multimedia controller, then reboot, but nothing happened.
I have read the discussions on the forum but, as far as I can tell, there is no solution that might respond specifically to my problem. I have also noticed that the media buttons on my front panel are unresponsive. I'm not sure whether the missing driver and media buttons situation are interrelated or there's just a coincidence.
Can anyone help, please?
There seems to be no explicit information on Toshiba's or Windows's sites relative to this particular issue which appears to be quite frequent among uses who shift from one OS to another.
Marinela
Solved!
Go to Solution.

How do I install Multimedia Controller in my A205-S6808.It doesn't have any at the moment.
Marinela wrote:
It's the Win 7 32-bit OS.
The exact words were
' The driver for Multimedia Controller is not installed. Install the latest driver for this device.'
Then
'Windows was unable to install your Multimedia Controller. If you know the manufacturer of your device, you can visit its website and check the support section for driver software.'
I downloaded and tried to install the Toshiba HD DVD Player application but what I got was
'This application cannot be installed on this computer. Setup will be aborted.'
I looked for the Toshiba playback/recording applications in the system, they aren't there. They must have vanished after I had the Win 7 re-installed as a result of a HD replacement.
Marinela

Similar Messages

Re: Satellite P200 PsPB3C-BB808C Cannot locate *Multimedia Controller*

I have just upgraded my neighbours' Toshiba Laptop to Win 7 after a bad Vista crash.
It is a Satellite P200 -BB808C.
When I started there were two drivers missing, the Mass Storage Controller and a Multimedia Controller. I did a clean install, starting with formatting the drive.
Windows 7 loaded A-OK and all Toshiba drivers were installed following the recommended sequence. I was able to locate the driver for the Mass Storage controller but as yet cannot find anything for the Multimedia Controller.
I have been alternating between the Canadian and USA site with no luck.
I have also spent a lot of time Googling different variations of the same question, trying to locate some info on this driver. It seems a lot of people are having the same problem.
So far the system is performing very well with no glitches or hang-ups.
Any suggestions would be appreciated.
Thank you.

Thank you for the prompt reply.
Yes I have checked that out already.
There are no details given in the device manager for this item. There is a code 28 for this driver and an exclamation mark by the controller name.
It gives the location as PCI Bus 6, device 0, function 0.
The driver, details and resources tabs are all empty, no details whatsoever.
I was wondering, perhaps I should try re-installing all the drivers, etc.
Your thoughts.

S5-1260 multimedia controller driver

I have this HP Slimline s5-1260 pc running win8 64 and on control panel under device manager I see a yellow sign on multimedia controller.
Whenever I try to have it update its driver I get the answer that it was not possible...
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver.
Since I no longer can use multimedia, how can I get the driver and use the remote control, watch live tv and everything on my pc?

You can try and check installing TV tuner and remote solution application drivers from below links.
Remote Solution Application :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-111527-1&cc=us&dlc=en&lc=en...
TV tuner:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-99281-1&cc=us&dlc=en&lc=en&...
Note : TV tuner drivers are not available for Windows 8. If above link doesn't help contact HP for compatible TV tuner drivers for Windows 8.

Multimedia Controller

Put my hard drives into a t380d with a ASUS P4SD-LA motherboard.
Reloaded XP Professional.
Device Manager Shows yellow ? in Other devices and also Multimedia Controller.
Multimedia Controller properties show (This device is not configured correctly Code 1)
I went to ASUS and cannot find any drivers for this board.
I looked in HP for a driver.
I cannot connect to the internet with this computer because the Hardware update wizard will not recognize the wifi adapter.
Help ?
This question was solved.
View Solution.

Hi:
I believe this is the audio driver you need:
Accept the agreement. Download and install the 6th file listed.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...
For the other devices with the yellow ? marks, click on them and then click on the details tab.
Post the string of characters you see. You need to have XP SP2 or SP3 in order to see the hardware ID's.
Paul

UIButton tag not available in controller code

Hi, I have UIButton defined in InterfaceBuild. I assigned Tag (integer?) to the button. It has a IBOutlet in my controller code. But my controller can not retrieve the tag value by using:
int tag = mybutton.tag;
It is always 0 no matter what I set in Interface Builder.
Why?

I am new to interface builder and I'm not sure how to give each button a separate unique tag in interface builder. I can figure out how to access them in code once there set. This is probably something really simple that I'm missing.

Help in Controller Code-Urgent

Navigation:
By Clicking on HR UAE Employee SelfService responsibility,
We get Professional Details
In the Professional Details, we have to Click Competence Profile.
By clicking on Competence Profile, it will navigate another page.
In that Screen .there will list of Competences, Skills for particular Employee.
Both Competence and Skill are going to Store in a same Column
i.e. Attribute1 (column) in table per_competences.
Based on the Attribute1 value we can differentiate the Skill and Competence.
If Attribute1----Yes means it’s a Skill
Attribute1-----No means it’s a Competence.
For both Skill and Competence we have individual Correct marked pencil symbols are there.
By Clicking on pencil Symbol we can edit the competences, skills.
Imp Note: Both Skills, Competence having separate Pencil Symbols.
Requirement:
Now the Requirement is, the competence’s pencil marked Correct Symbol should be inactive,
Skill Correct button should be active for an employee.
Competence Correct button inactive means, the correct button should be visible in Shaded format. By Clicking on that nothing should be happen.
And all the above requirement is specific to UAE Business Group only.
Solution prepared by me:
I have extended the Controller; I have defined one VO in Controller.
I have moved this Extended Controller to the server path, and I bounced the apache, opmn servers.
And I have added Custom Controller path in Personalization page.
Result:
The result im getting is, when login as an employee, In the Competence Screen it is allowing me when Im Clicking on Competence Correct box. It is navigating to another Page,
In that Page there is Dropdown box (Profesiciency level).
Previously it is having values like
1-Unaware
2-Aware
3-perform under supervision
4-perform Unsupervised
5-lead / Coach perform Unsupervised
Before to extending CO, it is showing like as above.
After extending Controller, In the proficiency level (drop down box) the above values (1- Unaware, 2- Aware, 3- perform under supervision, 4- perform Unsupervised, 5- lead / Coach perform Unsupervised) are not coming. They are disabled.
I think the controller code is effecting here. But it has to effect in the before screen, at correct box. The correct button should not allow when we clicked on that.
OA Framework     12.1.1
Oracle OA Extension     10.1.3 - build 1089
Business Components     10.1.3.3
Im giving Extended Controller Code. For code see below.
package petrofac.oracle.apps.per.selfservice.competency.profile.webui;
//petrofac.oracle.apps.per.selfservice.competency.profile.webui.xxskillupdationCO
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
//import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
import oracle.apps.per.selfservice.competency.profile.webui.OverviewPageCO;
import oracle.apps.fnd.framework.OAFwkConstants;
//import oracle.apps.fnd.framework.webui.beans.OAImageBean;
import oracle.apps.fnd.framework.webui.beans.OAImageBean;
//import oracle.apps.fnd.framework.webui.beans.OASwitcherBean;
import oracle.jbo.ViewObject;
import oracle.jbo.Row;
public class xxSkillUpdationCO extends OverviewPageCO {
public xxSkillUpdationCO() {
public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
// String apprSysType = pageContext.getParameter("pSystemType");
String apprSysType = pageContext.getParameter("pSystemType");
super.processRequest(pageContext, webBean);
//Get the Application Module
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (am.getOADBTransaction().isLoggingEnabled(OAFwkConstants.STATEMENT)) {
pageContext.writeDiagnostics(this, "pSystemType = " + apprSysType,
OAFwkConstants.STATEMENT);
//Create a VO to query employee related information.
ViewObject SkillUpdationVO = am.findViewObject("pfSkillUpdationVO");
//Check if VO exists. If exists, then create the VO.
if (SkillUpdationVO == null) {
StringBuffer query = new StringBuffer();
//check if attribute1 is yes or not
query.append(" SELECT ");
query.append(" ( ");
query.append(" CASE ");
query.append(" WHEN pc.attribute1 = 'Yes' ");
query.append(" THEN 1 ");
query.append(" ELSE 0 ");
query.append(" END ) is_yes ");
query.append("FROM per_all_people_f ppf, ");
query.append(" per_competence_elements pce, ");
query.append(" per_competences pc ");
query.append("WHERE ppf.person_id = pce.person_id (+) ");
query.append("AND pce.competence_id = pc.competence_id ");
query.append("AND TRUNC(SYSDATE) BETWEEN ppf.effective_start_date AND NVL(ppf.effective_end_date, SYSDATE) ");
// query.append("AND TRUNC(SYSDATE) BETWEEN pas.effective_start_date AND NVL(pas.effective_end_date, SYSDATE) ");
query.append("AND ppf.person_id = :1 ");
SkillUpdationVO =
am.createViewObjectFromQueryStmt("pfSkillUpdationVO",
query.toString());
SkillUpdationVO.setWhereClauseParams(null);
SkillUpdationVO.setWhereClauseParam(0,
pageContext.getEmployeeId() + "");
//execute the query
SkillUpdationVO.executeQuery();
if (SkillUpdationVO.hasNext()) {
Row row = SkillUpdationVO.first();
if (am.getOADBTransaction().isLoggingEnabled(OAFwkConstants.STATEMENT)) {
pageContext.writeDiagnostics(this,
"ATTRIBUTE1 =" + row.getAttribute(0).toString(),
OAFwkConstants.STATEMENT);
// pageContext.writeDiagnostics(this, "EndDate ="+row.getAttribute(2).toString(), OAFwkConstants.STATEMENT);
if ("1".equals(row.getAttribute(0))) {
OAImageBean hrCorrectImageBean=(OAImageBean)webBean.findChildRecursive("HrCorrect");
hrCorrectImageBean.setFireActionForSubmit(null,null,null,false);
/*OAImageBean hrCorrectImageBean=(OAImageBean)webBean.findChildRecursive("HrCorrect");
hrCorrectImageBean.setFireActionForSubmit(null,null,null,false);*/

OA Framework Forum would be the right place to ask this.

Windows driver for "Multimedia Controller" and sound problem

Hi
I installed Windows 8.1 using Bootcamp on my Macbook Air (Early 2014, Intel i5).
Then I downloaded Bootcamp drivers from http://support.apple.com/kb/dl1720 and installed couple of them (wifi, intel chipset).
When I check the Device Managmer I still get "Multimedia Controller" in "Other devices" without drivers.
Beside that I think the sound is not working. I installed the Realtek sound driver. When I play sound file the volume bar in taskbar mixer is blinking but no sound is coming out : ).
Please help.

for multimedia controller if its onboard sound card use this drivers:
http://download.nvidia.com/Windows/nForce/4.62/4.62_nforce_audio_winxp2k_international_whql.exe
but based on both:
multimedia controller
multimedia video controller
think its external PCI device like TV tuner.
get this one to ID the device: http://www.zhangduo.com/UnknownDeviceIdentifier.exe

F2 button not booting PC into recovery mode and Multimedia Controller error in device manager.

Hello everyone,
I updated my lenovo ideacentre b540p from windows 7 home premium to windows 8.1 pro. I have two issues that came up after the upgrade.
1. I can no longer access the Lenovo rescue system 3.0 by pressing the F2 button during startup to boot into recovery mode which was possible when I was using windows 7 and because of this I am unable to install the software and drivers that came with the PC.
2. In device manager the multimedia controller driver is not installed. It shows a yellow sign in the other devices group. I have tried different version from the lenovo support site but none of them work. The PC was shipped without a CD containing the drivers but if I can access the rescue system, I believe I will find the driver I need for the multimedia controller.
Solved!
Go to Solution.

Audois wrote:
Hi RR7,
You might have a look at this page: http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/Windows-8-Recovery-partition-not-recogn...
It's Windows 8 related, but you'll better understand what may happen when your cloned HD has not the same size as the original one.
interesting post, thanks. sadly i'm not sure this really helps. i didnt find what i expected.
the reagent.xml only has two references to offset, and they both refer to the partition that contains windows 7. i have changed this offset on the cloned disk to match the actual partition offset but it makes no difference.
i don't see any reference to the hidden lenovo partition or its offset in the windows recovery.
i also cant see any reference to it in the BCD on either the source or clonded disk.
all i see if pressing F2 on the source OEM when powering on loads a special lenovo recovery environment, and doing the same thing on the clonded disk just shows the windows 7 boot loader option for choosing to boot windows or do a memory test.
my question still remains, what is the magic thats happening when i press F2?

ShuttleXpress Multimedia Controller Driver Issue?

I wanted to get a dedicated media controller to use as my volume/track/play/pause/mute control, and bought a ShuttleXpress Multimedia Controller for this purpose. Unfortunately, it doesn't work out of the box and I don't have much experience dealing with driver issues.
When I plug it in via USB, I see that it gets recognized, but I don't think evdev knows what to do with it. Running xev does not show it generating any keycodes, nor does dropping to the console and running showkey.
dmesg
[371959.472517] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[371959.671485] input: Contour Design ShuttleXpress as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input22
[371959.672093] hid-generic 0003:0B33:0020.000C: input,hidraw4: USB HID v1.10 Device [Contour Design ShuttleXpress] on usb-0000:00:1a.0-1/input0
cat /proc/buss/input/devices
I: Bus=0003 Vendor=0b33 Product=0020 Version=0110
N: Name="Contour Design ShuttleXpress"
P: Phys=usb-0000:00:1a.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input22
U: Uniq=
H: Handlers=mouse1 event15
B: PROP=0
B: EV=17
B: KEY=1fff 0 0 0 0
B: REL=180
B: MSC=10
I've done some searching around, and found a few resources but am not 100% sure how to proceed. It looks like this PowerMate Driver might have some support, but I wasn't sure how I'd add it to my system. I've also read that it is supported elsewhere, like LinuxCNC, Kdenlive, and there's some work for it on Android for the Nook.
Any advice on what my next steps should be?

irontoby wrote:https://github.com/irontoby/shuttleit
Awesome! I'll definitely take a look. I had pretty much given up on making the controller useful and worked around my setup in a different manner. Using it for audio control is exactly what I wanted, so I will absolutely revisit things. Thank you for posting this update!

Multimedia Controller missing Satellite A200 Win XP

I have a Satellite A200 TJ9 model laptop (Canada).
I just installed a fresh copy of Windows XP PRO on it. (Originally came with Vista...but made the laptop waaaaay too slow).
My problem is that I can not find a driver for a Multimedia Controller (not to be mistaken for Multimedia Audio Controller or Video Controller).
I have sound, video, and every other driver has been installed. But I can't find out what this Multimedia controller is.
Anybody have any ideas?
Thanks
Costa

Try Unknown Device Identifier 7.00 to see if it can lead you to the proper driver. http://www.zhangduo.com/udi.html
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Multimedia Controller driver?

I lost the driver disk to that came with my k7n2 delta (nforce2) main board. I went to the msi website and downloaded when I thought were the right drivers. Every device was found and installed except for a Multimedia controller and a multimedia video controller.
Does anyone know where to get the correct drivers.
The driver package I downloaded off the msi web site was as follows
NVIDIA nForce2 System Drivers for MCP2 of SB
Support model K7N2 (MS-6570), K7N2G (MS-6570), K7N2GM-L(MS-6777)
Description This nForce2 Win2K/XP driver package contains the below components:
Audio driver 4.08 (WHQL)
Audio utilities 4.08
Ethernet driver 3.13 (WHQL)
GART driver 3.34 (WHQL)
Memory controller driver 3.38 (WHQL)
SMBus driver 3.38 (WHQL)
IDE In-the-box 2.70
Installer 4.27
This nForce Win9x driver package contains the below components:
Audio driver 3.75 (WHQL)
Audio utilities 3.75
Ethernet driver 3.13 (WHQL)
GART driver 3.34 (WHQL)
Memory controller driver 3.38 (WHQL)
SMBus driver 3.38 (WHQL)
Installer 3.42
Date 2004-7-20
Thanks for any help in advance

Was this system setup using a clean install of XP wit SP2 or an upgrade to SP2?
I've seen a lot of problems with just doing an upgrade to SP2. Any time 1 of my customers ask me about upgrading to SP2 I tell them to get the lastest drivers for all thier hardware, back up all important files to disk, then do a clean install of XP with SP2.
If all you have is a cd for XP, there is a way to slipstream SP2 into XP and make a new cd that'll install cleanly. Then all you have to do is install all your hardware drivers.
Here's my favorite site for slistreaming SP2, http://www.theeldergeek.com/slipstreamed_xpsp2_cd.htm
It shows you how to do it using Roxio or Nero with the net download of SP2. I did it with the SP2 cd that I was able to obtain from MS. All I had to do was modify the run command line.

Controller Code 6.0.202.0

Do you know if the new Controller Code 6.0.202.0 supports the 1260 AP?

Hi,
No.. the AP 1260 needs 7.0 and above WLC software version..
http://www.cisco.com/en/US/partner/prod/collateral/wireless/ps5678/ps10980/data_sheet_c78-593663.html
Lemme know if this naswered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra

Downgrade versions of WLC controller code.

Hi All,
We have recently upgraded controller code to 7.3.101.0 from Version 7.0.116.0. after that users started reporting wirless disconnction issues.
we wanted to roolback to older code 7.0.116.0.
But WLC shows....
Primary images as 7.3.101.0
Backup images as 7.2.110.0
We need some clarification to procees further...please help
Can we simply downgrade to 7.2.110.0 ? --- by setecting secondary code in WLC ... command -->Config boot --> by selecting seondary code.
Is there any impact ?
or upload 7.0.116.0 code on WLC and reload of WLC will work ?
Thanks
Sri

Sri,
First off... Did you upgrade the FUS image when you upgraded to 7.3? This FUS image is required when the WLC is upgraded to v7.2.x.
Also note that if you have 3602 AP's you need v7.2.x.
If you want to downgrade, just load the code you want and it will replace one of the code versions and I believe it will replace the secondary, but that doesn't matter. After you upload the code, then push that code to all the AP's. When that completes, interchange the image on the ap and verify that the ap image has the code you are going to as primary and then you can reboot the WLC.
Sent from Cisco Technical Support iPhone App

Device Manager displayed " Mass Storage Controller (Code 28)"

Greetings to all Members
I am using AMD 64 x2 3800+ processor. MSI mortherboard K8N Diamond. Graphic cards, two units, Geforce GTX6600GT. I am running on Window XP SP2. I have also updated the AMD latest drivers.
I noticed each time I log on the computer, the computer would prompt "New Mass Storage Hardware Found" and prompt the wizard to install new found hardware.
I went to device manager and noticed the device status display "This drivers for this device are not installed (Code 28). I have also carry out all the steps as suggested from the device manager menu. Mass Storage Controller location is: PCI Slot 9 (PCI 3, device 0, function 0 is displayed at the Mass Storage Controller Display. The device Instance ID display "PCI\VEN_1095&DEV_3132&SUBSYS_710A1462&REV_01\4&14AECDBO&0&0060.
Try update driver option but to no success. Have all the driver systems (in the CD) that came together with the system installed as well. Again to no success in resoluting the problem.
To my horror after installing the drivers that I have downloaded from MSI website for the said board.
I notice the Virtual drive program failed to initialize.and the following messages were displayed during the installation of the website drivers for the said mortherboard:
There was a problem installing this hardware
Mass Storage Controller
An error occured during the installation of the device. The name is already in use as either a service or a service display name.
Can someone please help me to resolve this problem? Any suggestion or advise would be sincerelt appreciated.
Best Regards
Harry
Can someone please assist and provide me with some guidelines to resolve this problem.

Hi Bas
I manage to remove the yellow exclamation mark from the hardware, device manager by setting the Integrated Peripherals on Board Sil3132 mode from Sata to Raid.
The Sata and Raid controllers is displayed and upon opening it up further, I noticed the following controllers are displayed:
1 ) FarStone CDAWDM2001 SCSI Host Adapter.
2) Silicon Image SIL3132 SataRaid Controller.
Do you think I have set the right thing? Your kind opinion on this. I am using BIOS version used is 1.A
Thanks
Best Regards
Harry

S431 USB 3.0 eXtensible Host Controller Code 10

In Device Manager this controller has a yellow flag and the device status is "This device cannot start. (Code 10)"
I have attempted the following:
1. Uninstalling/Installing drivers from Lenovo Support
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-s-series-laptops/thinkpad-s43...
2. Uninstalling ALL USB controllers and having Windows update them upon reboot.
3. Hours of searching online but only seeing the same sorts of "fixes" i.e. uninstalling the controllers and ensuring I am using device specific drivers.
Note: No pins are visibly bent or damaged in the USB port and I don't have anything plugged into them.

Bump
Note:
I need advice regarding a possible "fix"
Some forums suggest removing all power and resetting the CMOS. This would require me to open up the back and disconnect the battery.
Will an action like this void my warranty?

Multimedia Controller, code 28

Similar Messages

Maybe you are looking for