Multimedia Controller

Put my hard drives into a t380d with a ASUS P4SD-LA motherboard.
Reloaded XP Professional.
Device Manager Shows yellow ? in Other devices and also Multimedia Controller.
Multimedia Controller properties show (This device is not configured correctly Code 1)
I went to ASUS and cannot find any drivers for this board.
I looked in HP for a driver.
I cannot connect to the internet with this computer because the Hardware update wizard will not recognize the wifi adapter.
Help ?
This question was solved.
View Solution.

Hi:
I believe this is the audio driver you need:
Accept the agreement. Download and install the 6th file listed.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT...
For the other devices with the yellow ? marks, click on them and then click on the details tab.
Post the string of characters you see.  You need to have XP SP2 or SP3 in order to see the hardware ID's.
Paul

Similar Messages

  • Windows driver for "Multimedia Controller" and sound problem

    Hi
    I installed Windows 8.1 using Bootcamp on my Macbook Air (Early 2014, Intel i5).
    Then I downloaded Bootcamp drivers from http://support.apple.com/kb/dl1720 and installed couple of them (wifi, intel chipset).
    When I check the Device Managmer I still get "Multimedia Controller" in "Other devices" without drivers.
    Beside that I think the sound is not working. I installed the Realtek sound driver. When I play sound file the volume bar in taskbar mixer is blinking but no sound is coming out : ).
    Please help.

    for multimedia controller if its onboard sound card use this drivers:
    http://download.nvidia.com/Windows/nForce/4.62/4.62_nforce_audio_winxp2k_international_whql.exe
    but based on both:
    multimedia controller
    multimedia video controller
    think its external PCI device like TV tuner.
    get this one to ID the device: http://www.zhangduo.com/UnknownDeviceIdentifier.exe

  • Re: Satellite P200 PsPB3C-BB808C Cannot locate *Multimedia Controller*

    I have just upgraded my neighbours' Toshiba Laptop to Win 7 after a bad Vista crash.
    It is a Satellite P200 -BB808C.
    When I started there were two drivers missing, the Mass Storage Controller and a Multimedia Controller. I did a clean install, starting with formatting the drive.
    Windows 7 loaded A-OK and all Toshiba drivers were installed following the recommended sequence. I was able to locate the driver for the Mass Storage controller but as yet cannot find anything for the Multimedia Controller.
    I have been alternating between the Canadian and USA site with no luck.
    I have also spent a lot of time Googling different variations of the same question, trying to locate some info on this driver. It seems a lot of people are having the same problem.
    So far the system is performing very well with no glitches or hang-ups.
    Any suggestions would be appreciated.
    Thank you.

    Thank you for the prompt reply.
    Yes I have checked that out already.
    There are no details given in the device manager for this item. There is a code 28 for this driver and an exclamation mark by the controller name.
    It gives the location as PCI Bus 6, device 0, function 0.
    The driver, details and resources tabs are all empty, no details whatsoever.
    I was wondering, perhaps I should try re-installing all the drivers, etc.
    Your thoughts.

  • F2 button not booting PC into recovery mode and Multimedia Controller error in device manager.

    Hello everyone,
    I updated my lenovo ideacentre b540p from windows 7 home premium to windows 8.1 pro. I have two issues that came up after the upgrade.
    1. I can no longer access the Lenovo rescue system 3.0 by pressing the F2 button during startup to boot into recovery mode which was possible when I was using windows 7 and because of this I am unable to install the software and drivers that came with the PC.
    2. In device manager the multimedia controller driver is not installed. It shows a yellow sign in the other devices group. I have tried different version from the lenovo support site but none of them work. The PC was shipped without a CD containing the drivers but if I can access the rescue system, I believe I will find the driver I need for the multimedia controller.
    Solved!
    Go to Solution.

    Audois wrote:
    Hi RR7,
    You might have a look at this page: http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/Windows-8-Recovery-partition-not-recogn...
    It's Windows 8 related, but you'll better understand what may happen when your cloned HD has not the same size as the original one.
    interesting post, thanks. sadly i'm not sure this really helps. i didnt find what i expected.
    the reagent.xml only has two references to offset, and they both refer to the partition that contains windows 7. i have changed this offset on the cloned disk to match the actual partition offset but it makes no difference.
    i don't see any reference to the hidden lenovo partition or its offset in the windows recovery.
    i also cant see any reference to it in the BCD on either the source or clonded disk.
    all i see if pressing F2 on the source OEM when powering on loads a special lenovo recovery environment, and doing the same thing on the clonded disk just shows the windows 7 boot loader option for choosing to boot windows or do a memory test.
    my question still remains, what is the magic thats happening when i press F2?

  • S5-1260 multimedia controller driver

    I have this HP Slimline s5-1260 pc running win8 64 and on control panel under device manager I see a yellow sign on multimedia controller.
    Whenever I try to have it update its driver I get the answer that it was not possible...
    The drivers for this device are not installed. (Code 28)
    There are no compatible drivers for this device.
    To find a driver for this device, click Update Driver.
    Since I no longer can use multimedia, how can I get the driver and use the remote control, watch live tv and everything on my pc?

    You can try and check installing TV tuner and remote solution application drivers from below links.
    Remote Solution Application :
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-111527-1&cc=us&dlc=en&lc=en...
    TV tuner:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-99281-1&cc=us&dlc=en&lc=en&...
    Note : TV tuner drivers are not available for Windows 8. If above link doesn't help contact HP for compatible TV tuner drivers for Windows 8.

  • ShuttleXpress Multimedia Controller Driver Issue?

    I wanted to get a dedicated media controller to use as my volume/track/play/pause/mute control, and bought a ShuttleXpress Multimedia Controller for this purpose. Unfortunately, it doesn't work out of the box and I don't have much experience dealing with driver issues.
    When I plug it in via USB, I see that it gets recognized, but I don't think evdev knows what to do with it. Running xev does not show it generating any keycodes, nor does dropping to the console and running showkey.
    dmesg
    [371959.472517] usb 3-1: new low-speed USB device number 2 using uhci_hcd
    [371959.671485] input: Contour Design ShuttleXpress as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input22
    [371959.672093] hid-generic 0003:0B33:0020.000C: input,hidraw4: USB HID v1.10 Device [Contour Design ShuttleXpress] on usb-0000:00:1a.0-1/input0
    cat /proc/buss/input/devices
    I: Bus=0003 Vendor=0b33 Product=0020 Version=0110
    N: Name="Contour Design ShuttleXpress"
    P: Phys=usb-0000:00:1a.0-1/input0
    S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input22
    U: Uniq=
    H: Handlers=mouse1 event15
    B: PROP=0
    B: EV=17
    B: KEY=1fff 0 0 0 0
    B: REL=180
    B: MSC=10
    I've done some searching around, and found a few resources but am not 100% sure how to proceed. It looks like this PowerMate Driver might have some support, but I wasn't sure how I'd add it to my system. I've also read that it is supported elsewhere, like LinuxCNC, Kdenlive, and there's some work for it on Android for the Nook.
    Any advice on what my next steps should be?

    irontoby wrote:https://github.com/irontoby/shuttleit
    Awesome! I'll definitely take a look. I had pretty much given up on making the controller useful and worked around my setup in a different manner. Using it for audio control is exactly what I wanted, so I will absolutely revisit things. Thank you for posting this update!

  • Multimedia Controller, code 28

    Hi,
    I use a Qosmio F45-AV412, running on Win 7 (recently re-installed).
    The system notifies me that there's no driver, on my computer, for the Multimedia Controller (code 28). I have tried to run the automatic update but Windows was "unable to find software" for my device. I have tried to uninstall the multimedia controller, then reboot, but nothing happened.
    I have read the discussions on the forum but, as far as I can tell, there is no solution that might respond specifically to my problem. I have also noticed that the media buttons on my front panel are unresponsive. I'm not sure whether the missing driver and media buttons situation are interrelated or there's just a coincidence.
    Can anyone help, please?
    There seems to be no explicit information on Toshiba's or Windows's sites relative to this particular issue which appears to be quite frequent among uses who shift from one OS to another.
    Marinela
    Solved!
    Go to Solution.

    How do I install Multimedia Controller in my A205-S6808.It doesn't have any at the moment.
    Marinela wrote:
    It's the Win 7 32-bit OS.
    The exact words were
    ' The driver for Multimedia Controller is not installed. Install the latest driver for this device.'
    Then
    'Windows was unable to install your Multimedia Controller. If you know the manufacturer of your device, you can visit its website and check the support section for driver software.'
    I downloaded and tried to install the Toshiba HD DVD Player application but what I got was
    'This application cannot be installed on this computer. Setup will be aborted.'
    I looked for the Toshiba playback/recording applications in the system, they aren't there. They must have vanished after I  had the Win 7 re-installed  as a result of  a HD replacement.
    Marinela

  • Multimedia Controller missing Satellite A200 Win XP

    I have a Satellite A200 TJ9 model laptop (Canada).
    I just installed a fresh copy of Windows XP PRO on it. (Originally came with Vista...but made the laptop waaaaay too slow).
    My problem is that I can not find a driver for a Multimedia Controller (not to be mistaken for Multimedia Audio Controller or Video Controller).
    I have sound, video, and every other driver has been installed. But I can't find out what this Multimedia controller is.
    Anybody have any ideas?
    Thanks
    Costa

    Try Unknown Device Identifier 7.00 to see if it can lead you to the proper driver.  http://www.zhangduo.com/udi.html
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Multimedia Controller driver?

    I lost the driver disk to that came with my k7n2 delta (nforce2) main board.  I went to the msi website and downloaded when I thought were the right drivers. Every device was found and installed except for a Multimedia controller and a multimedia video controller.
    Does anyone know where to get the correct drivers.
    The driver package I downloaded off the msi web site was as follows
      NVIDIA nForce2 System Drivers for MCP2 of SB
      Support model  K7N2 (MS-6570), K7N2G (MS-6570), K7N2GM-L(MS-6777)
      Description This nForce2 Win2K/XP driver package contains the below components:
    Audio driver 4.08 (WHQL)
    Audio utilities 4.08
    Ethernet driver 3.13 (WHQL)
    GART driver 3.34 (WHQL)
    Memory controller driver 3.38 (WHQL)
    SMBus driver 3.38 (WHQL)
    IDE In-the-box 2.70
    Installer 4.27
    This nForce Win9x driver package contains the below components:
    Audio driver 3.75 (WHQL)
    Audio utilities 3.75
    Ethernet driver 3.13 (WHQL)
    GART driver 3.34 (WHQL)
    Memory controller driver 3.38 (WHQL)
    SMBus driver 3.38 (WHQL)
    Installer 3.42
      Date 2004-7-20
    Thanks for any help in advance

    Was this system setup using a clean install of XP wit SP2 or an upgrade to SP2?
    I've seen a lot of problems with just doing an upgrade to SP2. Any time 1 of my customers ask me about upgrading to SP2 I tell them to get the lastest drivers for all thier hardware, back up all important files to disk, then do a clean install of XP with SP2.
    If all you have is a cd for XP, there is a way to slipstream SP2 into XP and make a new cd that'll install cleanly. Then all you have to do is install all your hardware drivers.
    Here's my favorite site for slistreaming SP2, http://www.theeldergeek.com/slipstreamed_xpsp2_cd.htm
    It shows you how to do it using Roxio or Nero with the net download of SP2. I did it with the SP2 cd that I was able to obtain from MS. All I had to do was modify the run command line.

  • HP Pavilion Elite m9070_it multimedia controller missing

    Installed W8.1 Pro all is ok
    but in device manager one driver is missing
    how can I resolve this problem?
    This question was solved.
    View Solution.

    Hello Sermo,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that after installing Windows 8.1 on your HP Pavilion Elite m9070 you are showing one device that is still not installed correctly. I have check the HP Pavilion Elite m9070.uk-a Desktop PC Bundle Drivers page and it does not show any Windows 8.1 drivers for your computer. This means you are down to either finding the original manufacturer and seeing if they have any compatible drivers or re-posting with the Hardware ID and I will endeavor to see if there are any compatible drivers.
    Please re-post if you require addtional support. Thank you for posting on the HP Forums. Have a wonderful day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Error multimedia controller dv7 / eSATA not recognised

    HP Pavilion dv7 Win 7 32-bit. I have read and installed the audio codec & the Intel Matrix package. The BIOS is one version of the current published version. I have confirmed that the external drive and eSATA cord are functioning correctly (on another computer).

    Did you reinstall the OS?
    Please post your full product Number
    http://h10025.www1.hp.com/ewfrf/wc/findModel?cc=us&dlc=en&lc=en
    #2
    Please Do Not post your s/n

  • Satellite Pro A300D - Driver for Multimedia audio controller

    Hi,
    I have Toshiba Satellite pro A300D and one day the built in mic, built in camera and the speakers stopped working.
    When i checked out Device manager i saw that the driver for the multimedia controller was not working so i uninstalled it and went on the toshiba site to installed the new driver.
    When i looked up drivers for my computer they have everything except that driver!
    Is there anyone who knows were i can find it?
    I use the computer to work with music and i am gonna record some people soon and than i really need it to work!
    Best regards,
    Hermann

    Hi
    You are using Win XP?
    Well, i had some problems with Win XP and sound as well.
    The point is that Win XP needs some patches and updates before installing sound driver.
    You have to install Win XP SP3 before installing sound driver.
    I recommend doing this;
    - remove from device manager the sound card and the Intel High Definition audio
    - uninstall the sound driver
    - install SP3 and update the Win XP to latest state
    - reboot the unit and install the sound driver again.
    - reboot and test the sound
    Greets

  • 2005 1430n HP multimedia computer...

    I have a a1430n HP multimedia computer that I recently resurrected with a complete destructive re-installation of the Windows XP Media Center Edition...However now, the DEVICE Manager is exhibiting four instances of MULTIMEDIA CONTROLLER errors + two instances of MULTIMEDIA VIDEO CONTROLLER errors + 11n adapter error!
    I am considering flashing the bios before I junk it but it has served me well over the years and YES. I DO LOVE ALL OF MY HP PRODUCTS!
    What would you folks suggest to get this machine up and running again so the optical drives will be functional?

    Hi: Please post the hardware ID's for each of the devices needing drivers. To find the hardware ID, click on each device with the yellow ? mark. Then click on the details tab at the top of the device window. Post the string of characters you see in the window. The 11n adapter is some wireless card you added that needs a driver, and HP probably won't have it, so I will have to figure out who made it unless you have the driver disk for it. The product specs for your model indicates it only came with wired networking capabilities.

  • Multimedia Audio Control

    I installed my Li've 24 bit sound card several months ago and it worked. Six weeks ago it stopped working. Due to other issues, I reformatted the hard dri've, reinstalled Windows Media Center and received two errors with multimedia audio controllers not being installed and of course no sound. I installed the Li've 24 bit driver, rebooted, and now receive one error for the controller and no sound. I uninstalled the controller and rebooted and again I get no sound with a ? next to multimedia audio controller in device manager like always. The li've drivers installed properly in device manager with no errors or ?s. HELP!

    I fixed the error multimedia controller by turning off sound card on BIOS - but still no sound.

  • Multemedia controller drivers

    I've a s3321p Mini and keep getting message to add multimedia driver. All attempts to locate driver fail. Device manager shows 24 instances of Multimedia Controller, none with any ID.  Just installed Vista SP2 and it keeps "finding" new device and asks for driver. Does it 24 times. Any ideas?

    Plague,
    Are you running XP Service Pack or 2? There were some problems with SFMAN32.DLL that were corrected with SP2. Also you may want to clean boot into the system when installing the driver update. This is described at the end of the FAQ at the top of this board.
    Jeremy

Maybe you are looking for

  • Internet security for my macbook pro

    need some advice do i need internet security for my macbook pro it has been sugested that apple devices dont get virises?  if so thats the best one to buy

  • SAP Work Manager 6.1 deployment on SMP

    Hi I am facing this issue while publishing the Agentry app in SMP. I am not getting the successful message after browsing the Zip file as mentioned in the Step 8 according to this blog SMP 3.0: Custom development of SAP Work Manager 6.1 on Agentry Se

  • ITunes failure

    ok so I purchased music, Itunes won't let me download it, and tells me I bought it, but not with my account, yet the charge shows up on my account, and I can't download it in recent purchases???? What???

  • Which settings for exporting from iMovie '09

    I have a couple of projects coming up, and I'll be using a MiniDV camera (Canon XL1S) and a hard drive camera (Canon Vixia HG21). For final editing I'm using iMovie 6 (still feel the most comfortable with it), but need to use iMovie '09 to import AVC

  • Removing multiple entries with minimal overhead

    What is the best way to remove a set of entries from an optimistic cache with minimal messaging overhead? Right now, I'm calling myCache.keySet().removeAll(setOfKeys). Does tcmp coalesce all these removals into one messaging sequence, or are all of t