"multimedia message settings not defined"
Just got a new Nokia 6233. It's driving me mad trying to send a picture attachment. Every time I get this same error message. Of course, no help in the user guide or
any mention of this error message. Anybody know what it means and how to overcome it please?
Hi Mikeos, Sorry to hear that you are still having issues sending and receiving MMS. If everything is set up on the phone correctly it maybe a case of having it activated on your Vodafone account. I would like to look into this for you, please fill in Vodafone's Online Contact Form using the link below. https://online.vodafone.co.uk/dispatch/Portal/appmanager/vodafone/wrp?_nfpb=true&_pageLabel=Page_Hel... Please enter the code FIT135 into the body of your email to ensure that it comes through to our department. Fill in as much information as possible to allow me access to your account with out having to ask for further information. I look forward to hearing from you. Techgirl Vodafone UK
Similar Messages
-
Fault Message is not defined?
Hi @,
I am using BPM asyn sync for File2RFC scenarion and while activating the scenarion I am getting return code 99 and when i see the activation log I am getting errro description as Fault Message is not defined I have done the Fayult message mapping between Abstract Sync Message and RFC Sync message between their fault and exception types but still
Help is urgent
RegardsHi,
you define the exception handler in the block properties. Define (via context) an exception branch for the block, where you jump into in case of errors and decide, what to do (f.e. alert or stop process).
Regards,
Udo -
BPM in CACHE won't activate. Fault message is not defined
Hello All,
After adding fault messages to our RFC scenarios, our BPM will no longer activate from transaction SXI_CACHE. The ReturnCode is 99. When we attempt to do a manual activation, we get an error which reads:
<b>Send step: Fault message '722783b5171311d9881bd5c4c0a8a777' is not defined</b>.
Have any of you seen this before?
We have mappings for the fault messages in interface mappings. Is there something else needed in the BPM itself?
Thanks,
JimmyFrom OSS:
The synchronous send steps define a fault message as exception. In this
case you have to wrap a block around every one or all send steps.
The block catches the exception, in your case the fault message.
The problem is, if no handler is defined, the import of the process fails (SXI_CACHE).
So modify the process, wrap a block with exception
handling around the send step and activate once more. -
Build failed:"Message type not defined" - can't dereference schemas in MDS?
Hi,
I'm trying to write my first ABCS using the WorkerEBM & EBO.
I used the AIA service component wizard to generate the composite app. When I try to build it I get the error:
*Error(66): WSDL messageType "{http://xmlns.oracle.com/EnterpriseServices/Core/Worker/V1}CreateWorkerReqMsg" of variable "CreateWorkerAppReqMsg" is not defined in any of the WSDL files*
I can browse soa-mds connection from jdeveloper and navigate (using [ctrl-click]) from my composite to the wsdl and through to the schema - so JDeveloper can find all the necessary resources at coding time.
It can take up to 40 seconds to query and view the AIAMetadata subfolders this way.
Could the build script be timing out while querying soa-mds for resources at build time? Is there a timeout config that can be extended?
FYI: I had to add the jdbc-password of the MDS store to adf-config.xml to get past a password failure message in scac.log.
Thanks
...GarretHi,
I'm trying to write my first ABCS using the WorkerEBM & EBO.
I used the AIA service component wizard to generate the composite app. When I try to build it I get the error:
*Error(66): WSDL messageType "{http://xmlns.oracle.com/EnterpriseServices/Core/Worker/V1}CreateWorkerReqMsg" of variable "CreateWorkerAppReqMsg" is not defined in any of the WSDL files*
I can browse soa-mds connection from jdeveloper and navigate (using [ctrl-click]) from my composite to the wsdl and through to the schema - so JDeveloper can find all the necessary resources at coding time.
It can take up to 40 seconds to query and view the AIAMetadata subfolders this way.
Could the build script be timing out while querying soa-mds for resources at build time? Is there a timeout config that can be extended?
FYI: I had to add the jdbc-password of the MDS store to adf-config.xml to get past a password failure message in scac.log.
Thanks
...Garret -
Error message (Competitor not defined )
when i create customer as a competitors has account group 0006 ..... and go to create new material as competitor products (Material type WETT) and i put number of competitor at basic data screen in competitor sub screen ... this message appear (this competitor not defined but i created this competitor
Dear h.abozied,
Is this issue in a CRM system or ECC system? Could you please provide the message number?
Thank you and best regards,
Ian Kehoe -
My multimedia messaging in not working at all on my lg g2!! HELP!!!!
I cannot send or receive mms, and all the ones i have already received are showing a broken "picture" with an exclamation mark.
moedl2011, thanks for those details. Did you have a chance to delete all unwanted text messages on your device and power it off/on? Please be advised that you have to disable Wi-Fi and connect to our network when sending and recieving multimedia messages. For more information regarding multimedia messaging, click http://vz.to/1tBO5pz
LasinaH_VZW
Follow us on Twitter @VZWSupport -
Error-Message "Item not defined on current page" after Page submit - AJAX
Hello,
a lot of subpages (regions) are loaded over htmldb_get and displayed on a master page.
The parts loaded over AJAX are reports. The report regions of these reports contain a hidden and protected field, which hold the page number (&APP_PAGE_ID.)
This was necessary because I had to overwrite the standard pagination function $a_report on the master page. Otherwise the standard pagination function uses always the page number of the master page and not the page number of the loaded subpages. The overwritten function $a_report is placed in the master page header and searchs for the hidden + proteced field, containing the page number of the loaded subpage.
This works already fine.
But after submitting the master page with before loaded subpages over htmldb_get, I get following error message:
Error Item ID (15348310159873659) is not an item defined on the current page .
Setting the hidden + protected field on the subpage to never display, the error message disappear, but the pagination function doesn´t work any more.
Where is the mistake I made?
Greetings
MichaelHello Ben,
yesterday evening I read in short your answer, but today I can´t see your answer. Have you edited it again?
My pagination function works fine and I would maintain it if possible.
But now a new feature is requiered, which require a submit on the master page. The submit on the master page is not possible due to the hidden field on the loaded subpage, containing the page number for the pagination function.
Using a normal text field (not saving state) works as long as the text field is visible (condiational view != never). But this information shouldn´t be visible to the user.
I thought, perhaps a cleanworkaround exists.
As dirty workaround I could place the information about the actual page number in the report themself (static invisible column). But as soon as the column is invisible (not shown), I have no access on this value
With a normal hidden html-input-element (not a APEX-Item) in the report regions header of the subpage, holding the page number, I get a http 400 error on page submit.
An I-Frame is not really a solution, because the master page contains several subpages, which should only be loaded and displayed on demand and not immediatly on page load.
Greetings
Michael
Edited by: user6044915 on 31.03.2009 00:27 -
Another bug messaging settings not sticking
everytime i reboot or check the message save location is set back to c drive.. need this fixed asap also as there is not enought memory on the c drive .. i also reset it to the e drive.
hmm i had that happen to me all the time on v10....but not on v11...i would recommend reinstalling firmware, back up all your stuff prior but i would go that route then rigth after update do a *#7370# default code is 12345 and see if it sorts things out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery.... -
Series not defined for journal entry
Hello Sir
I have defined two series namely "SCPL" and "New1"
Start No Last No
SCPL 10001 3000
New1 3001 30000
Now i have made "SCPL" series as default for A/R Invoices and "New1" series as default for rest of the documents like A/R Credit memo,Journal Entry etc...
Now when I try to add an A/R Invoice , it gives me error message "Series not defined for journal entry"..?? But i have defined New1 series as default for Journal EntryHi,
In the series defined for journal entry,set document series as default for which default journal entries will be posted automatically.
Ex.For delivey,return,invoice journal entry will be generated automatically,so if you a series like JESYS08 indicating system automated journal entry.This series should be set as default.
If you have further issue let me know. -
Structure Not defined..!!
Hello friends,
I have created a structure in the columns and trying to insert few characteristics in it.
It is not allowing me to do so and gives the message "Structure Not defined..!!" but if I try to insert KFs in the strcture, it works.
The same is the case if I try entering the Characteristics in the rows in a structure.
In short in a structure I am unable to enter caracteristics
Please help...
Thanks,
Suyog.hii
I think u did not take the selection in the structure.
when u r creating a structure just right click on it and select the new selection
Go to the edit mode of new selection and select the characteristics that u want to add in the selection area.
Hope this helps u out.
Thanks
neha -
I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above. -
Form of address key is not defined - Message AM117-VL02N
I have defined a COA for the customer when there is a PGI for that customer.
When I do the PGI i am getting update termination error - Form of address key is not defined.
As per the message it says that TSAD3T - TITLE is not maintained. But I see the customer master it is maintained as 'Company'.
Also when I remove the Title using XD02 also i am getting the same message.
Please let me know what settings and changes i need to do for PGI to happen.Hi,
check in customizing what form has been assigned and check the form. It sound like somebody created a form (SAPscript, Smartforms, Adobe Forms) for the billing document and there´s no window on it for the address or it has another name. -
Special G/L indicator X is not defined for down payments (Message no. F505)
{{{ Special G/L indicator X is not defined for down payments
Message no. F5053
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".}}}
*I have Created the Indicator X for Downpayment, and even assign both account to it but when i try to make my transaction using F-47 , it give me this error... kindly Give me Solution.can any one tell me how i can see the of the target special G/L indicators for indicator "F" *
Full Points would be awarded
RegardsHello Maz,
Please can you tell me the solution. I have the same problem with the following
Message no. F5053
The specified special G/L indicator is not classified as "down payment"
or not listed in the list of the target special G/L indicators for
indicator "F".
I have done all the settings in OBYR for Vendors and even included the Target sp.G/L ind 'Z' in my case for down payment request F.
Your help will be highly appreciated
Regards
Satish
EFI -
Error in Local Message System: Partner function RP is not defined
Hi Team,
I have configured Service Desk in solution manager 4.0 and When I create message from Development server I am able to see in Solution manager. Every thing works fine in Developement server.But in Quality i am not able to create mesage.
I have maintained BCOS_CUST table and defind BACK RFC (SM_SRSCLNT100_BACK)in quality server but When I try to create mesage using Help--> Cretae Support message I am getting error message as " Error in Local Message System: Partner function RP is not defined for notificatio Message was Not Created"
and not able to create message from Quality server.
Please let me know solution to fix this isssue.
Thanks in advance
Regards
VenuHi Venu,
This can be related to a configuration on table ( DNOC_USERCFGT ). You can use SM30 or go through IMG (
SAP Solution Manager -> Scenario specific settings -> service desk -> Partner Determination Procedure -> Use of own partner functions )
The parameter NO_USER_CHECK has to be set to 1 which means : No Existence Check for User.
Other point you need to check is wheater the user you are logged on in the QAS has the external identification correctly maintained in the respective BP on the Solution Manager side.
Regards,
Valdecir -
Inutilização de NFe: Log de erro Message type 8 is not defined
Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela MachadoVerifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM
Maybe you are looking for
-
Hi, so I pushed autofill because I thought that it would put music on my phone from a different iTunes library but it didn't work, and now the songs show up grey in my music on my phone and they won't play, but they are still there. What can I do to
-
HTTP client code 405 reason ICM_HTTP_INTERNAL_ERROR
Hi Experts, Getting the below error in the RWB could any one look at this and help me out. <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Error xmlnsAP="_http://sap.com/xi/XI/Message/30" xmlnsOAP="_http://sch
-
Connect of 2 SAP BW systems to one SAP Enterprise Portal
Hi! I have 2 SAP BW systems that should be integrated into SAP Enterprise Portal. I currently have already one SAP system entry "SAP_BW" within SAP EP. Questions Is it possible to define second entry for second SAP BW system in order to use 2 SAP BW
-
Hello, I'm making this really simple StringReverser where the user inputs the string into a JTextField and presses "Reverse". When this happens, I store the string in a StringBuilder and then reverse it and spit it out into a JLabel. I want to know 2
-
After connecting my computer to Microsoft for updates it has locked me out of administrative access. When wanting to install a software it keeps on saying connect a smart card. I have tried to go on start-Run -and typed gpedit.msc and it says access