Multimedia Offerings for Think Center on Windows 7

I am trying to install Multimedia Offerings for Think Center on my new installation of Windows7 and I'm getting following message:
This program can only be used with recording hardware that is not attached to this computer
Any solution?

mutlitmedia center for think offerings hasn't been updated to work with windows 7 yet. the latest version i could find online is dated 2006 and is only listed as being compatible with 2000 and XP. most of the updated apps won't be available until the october 22nd launch of 7. i don't know if MCTO is covered under the update.
oddly enough, the version of MCTO i have on my thinkstation works fine under server 2008 R2 (aka: windows 7 server). you could try installing it, although without a lightscribe burner this version may not install.
http://www-307.ibm.com/pc/support/site.wss/MIGR-68582.html
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

Multimedia Offerings for Think Center won't install

Hello,
When I try to install Multimedia Offerings for Think Center via Lenovo Update Manager I get the following Message:
"This program can only be used with recording hardware that is not attached to this computer."
P.S. DVD-RW device be part of my laptop
Solved!
Go to Solution.

Hello,
please take a look here.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

MultiMedia Center for Think Offerings install issues with Vista

Hello,
I recently upgraded my ThinkPad Z60m to Vista by doing a clean install from disk. Since this process involves manually installing each of the ThinkPad utilities manually (no pre-built image for Vista, only XP), I have ran into some issues with the installer for the MultiMedia Center for Think Offerings.
According to the Support & Download page, there are two downloads available for the Z60m and both have issues (or errors) that are preventing me from installing the application. Below are the two products and reasons for not installing:
"MultiMedia Center for Think Offerings for Windows XP and 2000"
Problem: Does not install on Vista
Error message: "Could not open \device\physicalmemory"
"MultiMedia Center for Think Offerings for Windows Vista"
Problem: ThinkPad Z60m is not a supported
Error message: "This program is not for machine type 2529EAU"
What I am looking for is an installation of MultiMedia Center for Think Offerings that supports users who have upgraded from XP to Vista (or downgrade depending on your feelings of Vista ). I have not found anywhere saying that upgrades from XP to Vista are not supported, so I should expect that software updates should be available for ThinkPad products on either platform.
Thanks in advance for your help.

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

Swipe for Notification Center and Control Center not working after using Window Zoom

I'm using iOS 8.0.2 on an iPhone 6 and have noticed that after using the Window Zoom (Accessibility feature 3-finger double-tap), I cannot swipe down for Notification Center nor swipe up for Control Center when unlocked (i.e. in Home screen or within an app screen). However, when the iPhone is locked, the swipe down for Notification Center and swipe up for Control Center is okay. It just doesn't work when unlocked. And the only way to rectify the problem is to reboot the phone.
Has anyone else experienced this?

I have figured out the solution to all of our problems!!! We can keep the zoom function ON!!!! Yay!
Step one. Turn back on the beloved zoom function.
step two. Tap screen with 3 fingers.
step three. Select window zoom. (If already selected move on to step Quatro)
step qautro. Select Resize lens.
and for the moment you've all be waiting for... Drum roll..
the grand finale step. IS...
shrink the window to the smallest size.
AFter you have done these 5 steps, you can thoroughly enjoy having all three functions at once. If you switch back to Full Screen Zoom (if that be your preference) the notification and control centers will remain functional! Bon apetit!
i have been successful enlarging the window while keeping the centers functioning by making sure the window is in the shape of a square.
-ChrisCasti

How do I disable "Exceptions" button for "Block pop-up windows" in Content tab?. I am able to Disable other Exception buttons in this tab using about:config preference.

Need a way to disable "Exception" button for "Block Pop-up windows" in Tools-> Options -> Content tab. I want to be able to do this for Locking Down Firefox preferences.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

That button doesn't have a pref associated with it, so you can't disable that button with a pref on the about:config page or a lockPref call.
That only leaves the choice to remove that button with code in userChrome.css
<pre><nowiki>#popupPolicyButton {display:none!important;}</nowiki></pre>
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

How to run GR55 reports in background for cost center hierarchies

1. I have been asked by our users to create batch jobs to run in the background for some GR55 reports, that can then be sent directly to cost center managers via email.
I have figured out the process to do this as long as the cost center manager only needs to see a single cost center at a time. However, if they are in charge of multiple cost centers, we also want to send them a summarized report using the hierarchy we have set up. I can't seem to make this work, as the job only seem to recognize the last cost center in the group and the report is for that cost center.
Example. cost centers 100, 200 and 300 belong to hierarchy abc. If I run the job just for cost center 100 it is fine. But if I have a variant to run hierarchy abc, or even if I use the range 100 to 300, all I get is a report for cost center 300.
We cannot use BW because we only have revenue in BW. I am being asked to make this work from standard R/3 within the GR55 realm of reporting.
2. In addition, the report selection criteria includes two separate plan/forecast versions. They need to update these each month prior to running the reports and sending them out. I looked at the variables associated with the versions and tried to set them up with default values that I hoped would update automatically so that they don't have to manually change 50 or so variants each month. But I don't see any dynamic variables that I can use to have the system make that change without going into each variant individually.
3. There is another piece to this equation as well. There is another report they want sent out in batch, but it is several pages wide in SAP and several pages long. So when you run it in batch and either spool it or get it sent as an email, it is very ugly in the formatting due to all the page splits horizontally and vertically. If anyone knows how to get the report to stay together like it would if you had excel integration turned on, it would be very helpful. I have tried running it with that integration turned on, but the jobs are set up with user batch_mgr and not my id, so it isn't working well. The batch_mgr id is just a system id, not a dialog id. We also don't want the jobs set up with a regular user id because if people leave, then the jobs all need to be changed.

Kim,
I may have options for issues 1 and 2. In case of 3, what I can tell you is I understand the concern, but this is what typically happens in some standard CO reports that are not ALV compatible, I don't think there is not much there to do unless you add some custom code for the output.
In regards to point 1, yes, I have noticed that this happens in some standard and custom reporting, not sure what is going on. I came up with a work around that made the trick for my client in a similar scenario; which is editing the cost center groups. For instance, instead of having the group set as a range from 100 to 300, the groups are have listed the cost centers, 100, 200 and 300. Obviously, the disadvantage of this option is that it would require a bit of more cost center group maintenance.
In regards to point 2, I understand from your note that your users already have set up selection variants for the report. One option for you is to get the help from a developer to create a custom period variable and tiny program that runs in batch every month that would update that variable accordingly. Once that's done, you may have to update at least once, the selection variant attributes to change the period to a selection variable, so everytime from that point of time forward that the variable gets updated, it will be ready with the right value for every selection variant that uses it.
Hope this helps.
GG

KO88 - Error when settling for Cost Center AND Auc for the same Internal Or

Hi Experts,
We need to configure Investment Internal Orders that could settle to both Cost Center and Auc, but each assignments with different Source Cost Elements
We did the following:
1. Created Auc Class
2. Created Investment Profile "IMOBIL" and assigned to Auc Class, flagging Auc
3. Created Allocation Structure "CV" with two assignments:
01, Source = Cost elements 7000000000 to 7999999999, receiver AUC "by cost element"
02 Source = Cost elements 4000000000 to 4999999999, receiver CTR "by cost element"
4. Created Model Order, filling the Investment Profile IMOBIL created in step 2.
5 Created Settlement Profile ZCV0001, assigning Allocation Strucutre CV, allowing CTR and AUC for receivers, default receiver is "FXA", doc type "AA".
6 Created ORder Type CV01, assigning Settlement Profile ZCV0001.
When I post only for Asset Expenses (Source Cost element 7, Assigment 01), the settlement through KO88 correctly settles to AUC, and also creates the settlement rule for cost center (i'm using the strategy to create from Responsible Cost Center).
But when I post for Asset Expenses (cost elements 7, receiver AUC) AND General Expenses (Source Cost element 4, receiver CTR), KO88 generates an error KD506, saying that for Assigment 02 - AUC I didnt define a settlement cost element.
1. Assignment 02 is not AUC, is CTR;
2. I flagged "by cost element", so I don't need a settlement cost element. And also, I was able to post to AUC when the source posting was only for cost element 7.
Did you face any problem like this?
I cannot find out what is the missing configuration, or if it is a program error...
Kind Regards
Mayumi Blak

Hi Ajay
I already created Source Structure and assigned to my Setllement profile (so I assigned Allocation Structure AND Source Structure).
I don't understand when you say that I need to assign the Source Sutrcture in each rule....because the Source structure is in the Settlement Parameters valid for both rules...
When I post to Asset Expenses only for the internal Order, the 2 rules (CTR and AUC) are created when I run KO88 (but only AUC rule is settled). This is OK.
The problem is when I post for both General Expenses AND Asset Expenses, the system is not recognizing that I have 2 source structures, neither is findind that for CTR AND AUC the Settlement cost elements are the original cost elements.
I'm thinking about changing message KD506 to warning, do you know if this can help?
Kind Regards
Mayumi Blak

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Mobile Device Center and Windows 8.1 (Enterprise) not working

After a HD crash i've got a new HD. Had to setup all development tools and so on. And because of a new setup why not over to Windows 8.1?
Now the problem is that Window 8.1 will not activate WMDC !? I keep saying "a component is missing" but no more information.
Does any body has any idea how to make a connection to my Windows Mobile 6.5 device? (Psion/Symbol Workabout Pro G4)
thanks

Please check this
Howto run Windows Mobile Device Center in Windows 8
and the last reply in this thread:
http://answers.microsoft.com/en-us/winphone/forum/sync/cannot-install-windows-mobile-device-center-on/698d9763-1a15-4d4a-8cc3-7e8804b78393
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to install DB6(DB2 for LUW) on a windows 2008 R2 failover cluster NodeB

Hi Gurus,
I am building a ECC6 EhP4 cluster on windows 2008 R2, I am following the installation guide chapter 7(document name: Installation guide SAP ERP6.0 EhP4 Ready SR1 ABAP on windows: IBM DB2 for Linux, Unix and Windows). But the step listed in the guide are not so clear and I have trouble for the database installation on the second node.
What I have done is:
1. 7.4.1 Preparing the database for MSCS step1 and 3
2. 7.4.2 Windows Server 2008: Creating the sap services and application
3. 7.4.3 Installing the central services Instance for ABAP (ASCS)
4. 7.4.4 Configuring the first MSCS node
5. 7.4.5 Installing the database instance on an mscs node(as i have done 7.4.1, i got some error in this step, then i checked some note and in note 1493410, it mentioned don't do step 7.4.1, so I uninstall the DB2, and get this step finished)
6. 7.4.6 Configuring the database for MSCS
7. 7.4.7 Configuring the Additional MSCS Node
8. 7.4.8 Installing an Enqueue Replicaiton Sever
9. 7.4.9 Installing the central instance
10. 7.4.10 Installing the dialog instance
Now I got problem on the database group, I cannot fail this to the second node. the DB2 Server resource cannot bring online to the second node. I think step 1, 4 and 5 may has some issue, but I don't know how should I install this database.
note 1493410's word confusing me, below is part of that note:
Chapter "Preparing the Database for MSCS"
You must not apply this chapter at the beginning of the installation. Instead, start the installation process with the next chapter "Configuring the First MSCS Node"
Follow the instructions in chapter "Preparing the Database for MSCS" in the exit step described in the chapter "Installing the Database Instance on an MSCS Node" before executing the db2mscs tool on the additional MSCS node only.
Point "3. Install all required operating system users ..." of this chapter is obsolete.
Anyone think my cluster still have chance to be fixed or I need rebuild it from scratch again. If I need build it again, I still don't know how to do the database installation on the second node
BR,
Peter

Hi pal,
Have you identified Ips and group names on which your sap application and DB should run..
I will give a overview...
Exam ples -
NODE A                  - 192.168.x.1
NODE B                   - 192.168.x.2 are the one which you idetify physical systems
1) Identify the drives you want to map for application and DB and make a partation and name the drives
2) Initially create Microsoft cluster service which creats cluster group----
CLUSTER GROUP   - 192.168.x.3 - Cluster name could be any thing meaningful...
Quorum disk          - 192.168.x.4 - 1 Gb drive
In point 2 if you are creating Cluster service with Heart ips you will naother ips for NODE A and NODE B ( 10.0.0.1 and 10.0.0.2)
3) Test and validate cluster configuration and ensure no erros are reflected
Above activities can be done with the help of OS Admin....
Now start working with SAP installation, even before that identify 2 names and ip address for SAP installation
Application group name can be as follows --
APPLPRD - 192.168.-x..5
Database group name can be as follows -
DBPRD - 192.168.x.6
You when you identify above drives for file systems and groups , you can start installation as mentioned in th guide...
Also let us know if you atrying to install EHP4 or EHP4.. as there some corrections to be followed in EHP4..
Open a new thread if you facing futher issues...
thanks,
rahuk

Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager

I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.

Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points

How to use a fixed port for remote assistance in windows 8.1 behind a nat router freebox?

Hello,
Before to use remote assistance in windows 8.1, i need to configure my nat router freebox.
But remote assistance ( msra.exe ) use a dynamique port and never the same.
How to use a fixed port for remote assistance ini windows 8.1 ?
And why i can't use easy connect ?
i read that the router must implement the PNRP protocol. I think it's a propriatary microsoft's protocol unknow on my router.
Thanks

Hello,
Very good. It's a big range ( 255 mini from 49152 ) for a single port but if it's the only one possibility...
You are very helpfull ( i don't know if it's a good english but you make me very happy )
Merci beaucoup

Report Writer Missing Data for Cost Center+Investment Internal Order

Hi Gurus,
I have met a problem on Report writer. T-code KSBB -> Report for Cost Center Group by Cost Elements in diff months.
The report can be drilled down to call KSB1 to give line items on the cost element by cost center/group.
The problem is the drill-down report missed the line items for investment orders. ( Compared with manually use KSB1)
The overhead internal order line items are fine.
For example, document 001-Apr:
Dr. Cost Element 1009                 $900 -- BA 90 Cost Center 90000 Investment order 9001
     Cr. Other cost elements.                  $900
Document 002-Apr
Dr. Cost Element 1009                 $800 -- BA90 Cost Center 90000 Overhead order 7001
     Cr. Other cost elements                      $800
In KSBB report, the cost center group for 90000 in cost element 1009 in Apr only has $800.
And the drilled down report which called KSB1 has the line item for docuemnt 002.
However, when I run KSB1 directly, the total amount for cost element 1009 in cost center 90000 is $1700.
Here is what I checked:
1. I have my ABAPer checked the KSBB program and KSB1 program to debug them in DEV ( DEV and PRD has the same problem). The different to get the data is that in KSB1, it has selected a value type 11 ( Googled: field name is WRTTP, Down payments as expenses. In program: WRTTP means Statistically Actual ) and 04 ( Googled: Actual True Posting. In program: 04 in WRTTP means Actual posting).
But in KSBB, it only select 04 when I clicked the drill down report to call KSB1.
2. I am thinking that the cause was on different types of internal order:
Overhead internal orders are statistical orders. Investment orders are actual orders.
Could you help to throw some light on the problem?
Thank you very much.
Emma

Hi,
Cost Centre vise Report you can take from KSB1
Internal Order Vise Report you can take fro KOB1
Regards,
Sridhar Sha

Is there an automated way to scan my multimedia folder for files that are there and not in my library and add them ?

Is there an automated way to scan my multimedia folder for files that are there and not in my i tune library and add them to y existing library ?
I recenty had a damaged i tune library and had to import an old version.
This last one does not have many of the CD I have copied the past months. And I don't know which ones these are either as they are too many of them.

This will list files that are in the iTunes DB but the files are not in the media folder…
http://dougscripts.com/itunes/scripts/ss.php?sp=listmias
This will list files that are in the media library, but not in the iTunes DB.
http://dougscripts.com/itunes/scripts/ss.php?sp=musicfolderfilesnotadded2
I think it may misbehave with ringtones & some of the obscure media files, but they are both really powerful for repairing mangled libraries.
I would create a new smart playlist for 'Tracks added since (todays date)' so you can easily find any tracks that you add back to iTunes.
Doug has a lot of scripts for iTunes, spread the karma & donate if they are useful to you

Multimedia Offerings for Think Center on Windows 7

Similar Messages

Maybe you are looking for