Multinode installation of 11i

I am installing 11i with 2 noodes,
Do we need to run rapidwiz from all the nodes?
if so, do we need stage areas in both the nodes?
Thanks,
Kavitha

Hi,
Do we need to run rapidwiz from all the nodes?Yes, run it on the database tier node first, copy the config file, then run RapidWiz on other application tier nodes.
if so, do we need stage areas in both the nodes?Yes, stage area should be accessible to all servers (either you have local copies, or access it remotely).
Regards,
Hussein

Similar Messages

Re Installation of 11i

I am attempting to reinstall and it takes only seconds to complete. This installation is looking at a particular file and stating that all products have already been installed. Can anyone tell me where or what that file is? I have already looked at the oraInst.loc file. Any help would be greatly appreciated.
Thanks,
Regina

Regina,
Every time that we reinstalled 11i (rapidwiz) we had to move the oraInventory directory. I would suggest moving this directory instead of deleting it. If other software had been installed, using the oraInventory directory, you would need to put the old one back in place to update that software. Our oraInventory directory is housed in our $ORACLE_BASE. Yours may be in another location.

EBS 12.1.1 multinode installation

thanx for your quick response and i want to give you more explanation about my environment :
4 apps node win 2003 sp2 32bit
2 db node as RAC 64bit win 2003
so what's the guidelines to install EBS 12.1.1 on 4 apps node and 2 db nodes as a RAC
Regards

Hi,
You need to follow the same procedure except that you need to convert the database from single instance to RAC (since Rapid Install does not install a RAC database).
For converting the database to RAC, please refer to (Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]).
Note: Please update the same thread instead of creating new one if your other questions are relevant to the main topic -- Multi Node Installation for EBS 12.1.1
Thanks,
Hussein

R12 multinode installation on IBM_AIX

Hi ;
I try to make imultinode R12 nstallation on IBM_AIX 5.3, i started installation on db server and everything gone soo well. But when i try to make installation on apps server i have this error:
touch: /b01/PROD/db/tech_st/10.2.0/test.tst
RW-00022:Error- Unable to create file wiht proper priviliges:
and same error for some directory path.
The fact is i dont have /b01 partation on my apps server... i showed to path /a01/PROD while i was making installation on db server.
Is anyone have idea why it try to create /b01/PROD that path on apps server
Thanks
Helios

I copied conf file and i copied it to my application node... Before i run rapidwiz i didnt have folder like b01 in my application node.. but when i run rapidwiz its created manualy on my "/" and i had space and file check error on validation screen
when i run rapidwiz its go and look /b01Do you run this on the correct node (issue "hostname") to verify.
If the above is OK, run rapidwiz with "hostname.domain: SID: PORT" and see if you get the same error or not.

Installation of 11i on 32-Bits OEL4 having linking error.

Hi,
I am trying to install 11i (11.5.10.2) on OLE 4.x 32-Bits, but having linking errors when adlnkoh.sh running. The log show following error message cat 10120907.log".
adlnkoh.sh started at Fri Oct 12 09:21:06 EDT 2012
logfile located in /ebs11i/oracle/visdb/9.2.0/install/make.log
Error while running adlnkoh.sh. Please check logfile
Errors while running adlnkoh.sh
There was an error while running the command - /ebs11i/oracle/visdb/9.2.0/temp/VIS_ebs11i40/adrun9i.sh APPS APPS
/ebs11i/oracle/visdb/9.2.0/appsutil/install/adlnkoh.sh: line 207: /ebs11i/oracle/visdb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Now the make log /ebs11i/oracle/visdb/9.2.0/install/make.log is showing following messages:
running genclntsh...
/ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
rm -f oracle dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest expdp impdp imp exp sqlldr rman nid extjob extjobo genezi ikfod grdcscan /ebs11i/oracle/visdb/9.2.0/rdbms/lib/ksms.s /ebs11i/oracle/visdb/9.2.0/rdbms/lib/ksms.o
But when I check details about file kpudfo.o, it is showing 64-Bits, How come this file is 64-Bits when I am installing 32-Bits application?
[oracle@ebs11i40:/ebs11i]$ file /ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o
/ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o: ELF 64-bit LSB relocatable, AMD x86-64, version 1 (SYSV), not stripped
Please help me with this issue.
Thanks.

There was an error while running the command - /ebs11i/oracle/visdb/9.2.0/temp/VIS_ebs11i40/adrun9i.sh APPS APPS
/ebs11i/oracle/visdb/9.2.0/appsutil/install/adlnkoh.sh: line 207: /ebs11i/oracle/visdb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instanceWhat version of gcc have you installed? Please make sure you are using the correct version (Perl Adcfgclone.pl dbTechStack Failed While Relink /usr/lib/gcc/i386-redhat-linux/3.4.6/libgcc_s.so: undefined reference to`dl_iterate_phdr@GLIBC_2.2.4' [ID 417605.1]).
/ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
rm -f oracle dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest expdp impdp imp exp sqlldr rman nid extjob extjobo genezi ikfod grdcscan /ebs11i/oracle/visdb/9.2.0/rdbms/lib/ksms.s /ebs11i/oracle/visdb/9.2.0/rdbms/lib/ksms.o
But when I check details about file kpudfo.o, it is showing 64-Bits, How come this file is 64-Bits when I am installing 32-Bits application?
[oracle@ebs11i40:/ebs11i]$ file /ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o
/ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o: ELF 64-bit LSB relocatable, AMD x86-64, version 1 (SYSV), not stripped
Please help me with this issue.What is the output of "uname -m" command? -- Installing onto Linux And Receive error: Genclntsh: Failed To Link Libclntsh.So.10.1 [ID 340861.1]
Thanks,
Hussein

EM Grid multinode installation

Hi DBAs,
I need to install the Oracle Grid Control (10.2.0.4 iasconsole) on 2 Nodes with pre-existing RAC on RHEL 5. Can you please help me with any doc or instruction how to setup multi-node EM Grid.
Regards
-Samar-

Hi Samar,
did you have a look in the advanced configuration guide of the EM documentation, chapters 3 and 4? There are instructions for several high availability scenario setups.
Guide can be found here:
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/toc.htm#
Best regards,
Robert

Java plugin not working with firefox1.0.4 post 11i installation.

Do anyone has idea which java plugin is requried for firefox1.0.4 to open Java applets after installation of 11i EBS?
I have checked jre1.6 update 5, it is perfectly installed and associated but not working for 11i applets.
Kindly do also tell me where to download the jdk version from?
thanx
Regards,
M. Farooq

Duplicate post
Jiniatior with browser firefox1.0.4 post 11i EBS installation
Re: Jiniatior with browser firefox1.0.4 post 11i EBS installation

Multinode Cloning

Hi all ,
Can someone guide me , what are the steps involved in doing a cloning on a multinode installation 11.5.10.2 on Linux
Thanks in advance
kind regards
Mat

your source doucmant is the following metalink note
230672.1 Cloning Oracle Applications Release 11i with Rapid Clone
if you need any help while cloning plz let us know
fadi
http://oracle-magic.blogspot.com

What is the difference between 11i for LInux (VS) 11i for Windows

Hi,
I have downloaded 11i E-Business suit for Windows and
Installed it successfuly.
I am having problem with windows plateform regarding listner, connection manager, service host, rpc all these stopping/terminating by itself and system rebooting.
I would like to install 11i on Linux.
Q1. Which files I need to download again?
Q2. Is there any script I need to run for LInux?
I have run adautostg.pl and it hasnot given me any error for start cd but when it came to appl_top it said as "This is for windows, continue any way" and I said yes. so it made stage.
I can't run setup as user Oracle as it is not allowed to write on disk, can u also give me suggestion about that?
I am installing 11i on single node.
Q3. I can use the same files of windows for linux as
I saw some .sh shell commands and
startcd/rapidwiz/adautostg.pl is also used in
unix/linux.
Warm Regards,
Rashid.

I have run installation of 11i for windows on Linux plateform and now I would like to share it with u all.
1. I run adautostg.pl by using command $perl adautostg.pl and it has staged all the startcd disks without any error.
2. when it came to other cdies it has prompted me as "this file if for windows; continue any way" and I pressed ok and it has staged all the files without any furthur error.
3. After it, I have made the necessary adjustments to run rapidwiz command and it run successfully. Now it has copied all the 113 files successfuly.It has run adrun9i.sh and is giving me error on process 5. (at 20% of installation) that it cannot run files
adcctclean.sql INSTE8
adclobconv.sql INSTE8
adclobtmp.sql INSTE8
adcmclean.sql INSTE8
adcrdb.sh INSTE8
adcrdbrdlg.sh INSTE8
adcrobj.sh INSTE8_APPLY
adcrobj.sql INSTE8
addbccnv.sql INSTE8
addbprf.sh INSTE8
addbprf.sql INSTE8
addbupdgsm.sql INSTE8
adlicnse.sql INSTE8
adsvdb.sh INSTE8
adsvdcnv.sh INSTE8
adsvdlsn.sh INSTE8
adupdlib.sql INSTE8
afdbprf.sh INSTE8_PRF
afdbprf.sql INSTE8
afmkinit.sh INSTE8_SETUP
Directory: /mnt/hda7/proddb/9.2.0/appsutil/install
adlnkoh.sh INSTE8
Directory: /mnt/hda7/proddb/9.2.0/appsutil/scripts/PROD_localhost
adautocfg.sh INSTE8
adchknls.pl INSTE8_SETUP
addbctl.sh INSTE8
addlnctl.sh INSTE8
adpreclone.pl INSTE8
adstopdb.sql INSTE8
adstrtdb.sql INSTE8
config.c INSTE8
successfuly. I think these files are required for linux installation and are found in linux cdies "RDBMS".
If someone can send me these 11i files for linux at [email protected] I will proceed furthur and will let u know what will happend next in experiment :)

11.5.10.2 Post Installation Check Failures in Linux

Hi All,
I had installed 11i (11.5.10.2) in an external drive (made as a Linux OS through VM Ware) and was trying to access through my laptop (having OS XP Professional)
The Installation of 11i in Linux (RHEL 4) went fine, except during the post installation checks I got the following errors:
1. JSP Check failed
and
2. Environment File Check failed
============================================
For the JSP Check:
a. I ensured the dbc file in $FND_SECURE top is fine
b. The jserv.log file shows as below:
java.lang.NumberFormatException: For input string: "%s_servlet_init_timeout%"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Long.parseLong(Long.java:394)
at java.lang.Long.<init>(Long.java:630)
at org.apache.java.util.Configurations.getLong(Configurations.java:678)
at org.apache.java.util.Configurations.getLong(Configurations.java:657)
at org.apache.jserv.JServServletManager.init(JServServletManager.java:320)
at org.apache.jserv.JServ.start(JServ.java:622)
c. The mod_jserv.log is as follows:
[04/07/2008 15:42:21:813] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:22:233] (EMERGENCY) ajp12: auth did not receive challenge size
[04/07/2008 15:42:22:234] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:29:394] (EMERGENCY) ajp12: auth did not receive challenge size
[04/07/2008 15:42:29:395] (EMERGENCY) ajp12: function auth fail
[04/07/2008 15:42:29:763] (EMERGENCY) ajp12: auth did not receive challenge size
d. I had given the virtual host as vision.imax.info, where imax.info is a named server that is registered
I am able to dig vision.imax.info, as shown below:
[root@vision etc]# dig vision.imax.info
; <<>> DiG 9.2.4 <<>> vision.imax.info
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 3228
;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;vision.imax.info. IN A
;; Query time: 12 msec
;; SERVER: 192.168.222.5#53(192.168.222.5)
;; WHEN: Fri Jul 4 18:59:56 2008
;; MSG SIZE rcvd: 34
but please note that my ifconfig gives the following output:
[root@vision etc]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:5E:C8:97
inet6 addr: fe80::20c:29ff:fe5e:c897/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:15421 errors:0 dropped:0 overruns:0 frame:0
TX packets:11828 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1464189 (1.3 MiB) TX bytes:2554712 (2.4 MiB)
Interrupt:177 Base address:0x1080
eth0:0 Link encap:Ethernet HWaddr 00:0C:29:5E:C8:97
inet addr:192.168.222.5 Bcast:192.168.222.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:177 Base address:0x1080
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2058114 errors:0 dropped:0 overruns:0 frame:0
TX packets:2058114 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:297458110 (283.6 MiB) TX bytes:297458110 (283.6 MiB)
and the linux OS having the static IP as follows:
IP: 192.168.222.5
Mask: 255.255.255.0
Gateway: 192.168.222.5
Primary DNS: 192.168.222.5
========================
And for the Environment File check:
The Error is:
RW 10006: Error: - APPL_TOP environment files has uninstantiated variables
File = /d01/oracle/visappl/VIS_vision.env
But I am not able to locate which variable is not instantiated...
Please help me to resolve this out... Please correct me if I am wrong any where..
Many Thanks....

Please note that, when I restarted the application services in a different terminal, I got the following script Error, only for the below mentioned script:
Executing service control script:
/d01/oracle/viscomn/admin/scripts/VIS_vision/addisctl.sh start
script returned:
addisctl.sh version 115.14
/d01/oracle/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
Unable to stop any Discoverer Sessions. No process-id file found.
Unable to stop any Discoverer Preference. No process-id file found.
Unable to stop any Discoverer Collector. No process-id file found.
/d01/oracle/visora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /d01/oracle/visora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Registering Discoverer Session
Registering the Collector
Applying preferences from file : /d01/oracle/visora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Closing down registry..
Registry File sync...
Registering Discoverer Preference Repository
addisctl.sh: exiting with status 127
.end std out.
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
/d01/oracle/visora/8.0.6/vbroker/bin/vbj: %s_disco_jretop%/bin/jre: not found
.end err out.
Check logfile /d01/oracle/viscomn/admin/log/VIS_vision/07042249.log for details
Exiting with status 1
====================
The /d01/oracle/viscomn/admin/log/VIS_vision/07042249.log file shows the following too:
[Service Control Execution Report]
The report format is:
<Service> <Script> <Status>
Oracle Apache Server VIS_vision adapcctl.sh Started
OracleTNSListener80APPS_VIS_vision adalnctl.sh Started
OracleConcMgrVIS_vision adcmctl.sh Started
OracleFormsServer-Forms60VIS_vision adfrmctl.sh Started
OracleReportServer-Rep60_VIS adrepctl.sh Started
Oracle Metrics Client VIS_vision adfmcctl.sh Started
Oracle Metrics Server VIS_vision adfmsctl.sh Started
Oracle Fulfillment Server VIS_vision jtffmctl.sh Started
Oracle Discoverer services VIS_vision addisctl.sh Failed
Oracle Restricted Apache Server VIS_vision adaprstctl.sh Disabled
Oracle Apache Server VIS_vision for PL/SQL adapcctl.sh Disabled
Oracle TCF SocketServer VIS_vision adtcfctl.sh Disabled
Oracle ICSM VIS_vision ieoicsm.sh Disabled
Oracle iProcurement Bulk Loader VIS_vision icxblkctl.sh Disabled
ServiceControl is exiting with status 1
Where could be the problem for the above issues....

E Business Suite 11i Server Spec for Linux?

Does anyone know, or can suggest possibilities, of a server spec for 11i on Linux. This is for a small company installation of 11i.
Where can I go to ansewer questions like this?
What Linux distributions are supported for 11i?
I was thinking of multiple CPU's, highpoint raid controllers to give RAID 0+1, and 1 or 2 Gb of memory.
thanks
Dave Darrall.

Jimmy,
Our E-business suite 11i has been running on the application tiers RHEL 4, due to the requirement to support large memory configurations on a 32-bit system. Is it true that from RHEL 5, the “hugemem” kernel which achieves this 32-bit memory scalability has been deprecated in favour of the use of 64-bit kernels?
Your 11i application tier will be limited to 32-bit even if you install 32-bit OS on x86-64 hardware.
Our Oracle 11g database is running on RedHat Linux 5.8. Is E-Business suite 11i (application tiers) certified to run on RHEL 5.8?
Yes.
Also for future planning, is E-Business suite 12 (application tiers) certified to run on which versions of RedHat?
Please see:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Linux x86-64 (Doc ID 1330701.1)
Thanks,
Hussein

Installation of 11 i on windows NT

Hi
which document gives all the required steps for installation of 11i on windows NT.
Rapidwiz says
1) checking mks utilities and 'which' is not found
2) JdK available but no executables.
On 2 I have this addl info. I installed latest jdk 1.3.1 and installed on c:\java\jdk1.3.1 directory and the bin directory is right under jdk1.3.1
Can I acess metalink account. I have only purchased evaluation software.
Help on these things appreciated highly
thanks in advance

Hi Ratan,
Do you know where i can buy the Demo Vision 11i of Oracle applications??, if this software exists in the oracle store under some other name?.
thanks
Marco Silva

How to setup multi node installation

Hi all,
I have successfully installed Oracle E-Business Suite 11.5.10 in a single node.
But, I would like to get some suggestions on How to perform the multinode installation in which all the application tier servers in independent nodes?
If the nodes are placed in different places geographically, how can I move all these nodes in to a single network? Is this possible?
Please guide me.
Thanking in advance
Rameshkumar

1. Is it right if I assumed that we must check that
box if we want to install apps tier in more than one
server so that if we only want to install apps tier
in only one server then we don't need to check that
option? Or we better check it even no matter how many
server we installed apps tier into? You only need to check that box if you intend to used a shared application tier filesystem for a multi-node installation. If you are only going to have one app tier server, you don't need to check the box. If you plan on multiple apps tiers, each with its own copy of the application tier file system, you also don't need to check that box.
2. If I still uncheck that option will there be any
problem such as in backup & restore, clone, testing
activity, etc?No, should not be any problem at all.
3. When we created user for each db tier and apps
tier, what will be better, create the same user for
both tiers or differentiate user for each db tier and
apps tier? I'm thinking of using same user for both
tiers to avoid privilege problem later on.
I'd recommend the same user for application tier files on all nodes in the system, and a different user for database-tier files. For example, in our system the database software (RDBMS ORACLE_HOME) and database datafiles are owned by 'oracle', and the EBS application files (APPL_TOP, forms and web server, etc) are owned by a user called 'applprod' (though of course you should choose a user name that makes sense in your environment.
4. Can we start clone process in db tier and apps tier >paralel in multinode environment or still start clone >process in db tier first then apps tier?Still need to do the db tier first, since 'adcfgclone.pl appsTier' will want to talk to a database. :-)
Regards,
John P.
Message was edited by:
jpiwowar (forgot to answer the 4th question the first time, whoops)

How to license Latin American Localization (JL) in Oracle Applications 11i

Hi,
How to license Latin American Localization (JL) in Oracle Applications 11i .
Regards .

Pls check below MOS:-
How To Use OAM To License JA (Asia/Pacific Localizations), JE (European Localizations), JG (Regional Localizations) and JL (Latin-American Localizations) in Oracle Applications ? [ID 351900.1]
How to install Latin American localization? [ID 268396.1]
Also to check currently installed localization, pls check below MOS:-
NOTE:122491.1 - How can I find out what I need for a country installation- globalization 11i?
Thanks,
JD
Edited by: JD on 27-May-2011 03:28

11i APS certification on RHEL 64 bit

Hello,
I am trying to find certification information for 11i Advanced Supply chain Planning on Red Hat Enterprise Linux 64 bit platform.
We are planning to do a platform migration from Solaris to RHEL.
The current installation of 11i APS is on Solaris 64 bit platform. Database is also on 11gR2(11.2.0.3) Solaris 64 bit.
We want to understand if 11i APS is certified on RHEL 64 bit in order to take up the platform migration exercise.
Please advise.
Thanks,
Ganesh

Thanks much! Ark, i could proceed..
by using command
unset DISPLAYand started the installation using below command:
java -d64 -Xmx1024m -jar wls1211_generic.jarextracted 100% successfully and continued to installation, but now i am stuck at the place where its asking for
Register for security updates:
i gave Proxy Server: "localhost" , port: "80" ,username: "spotnuru", password : <gave my password>
now when i say Next and press enter, it says The connection cannot be established to "localhost:80"
i am new to installation, any help is appreciated..
thanks in advance,
Srinivas P.

Multinode installation of 11i

Similar Messages

Maybe you are looking for