Multipath I/O: Removal failed
When I try to Remove Multipath I/O feature (all customized settings on the MultiIO have been removed) , I got this error:
<Error>: Attempt to un-install Multipath I/O failed with error code 0x80070643. Fatal error during installation
Please refer to the full log at: 'C:\Windows\logs\ServerManager.log'
In the Server Manager Log file, I found these logs:
==============================
2320: 2012-05-30 11:15:01.089 [InstallationProgressPage] Begining Sync operation...
2320: 2012-05-30 11:15:01.089 [Sync]
Sync Graph of changed nodes
==========
name : Multipath I/O
state : Deleted
rank : 1
sync tech: CBS
ant. : empty
pred. : empty
provider : Provider
2320: 2012-05-30 11:15:01.089 [Sync] Calling sync provider of Multipath I/O ...
2320: 2012-05-30 11:15:01.089 [Provider] Sync:: guest: 'Multipath I/O', guest deleted?: True
2320: 2012-05-30 11:15:01.089 [Provider] Begin un-installation of 'Multipath I/O'...
2320: 2012-05-30 11:15:01.089 [Provider] Uninstall: Guest: 'Multipath I/O', updateElement: 'MultipathIo'
2320: 2012-05-30 11:15:01.089 [Provider] Un-installation queued for 'Multipath I/O'.
2320: 2012-05-30 11:15:01.089 [Provider] [STAT] For 'Multipath I/O':
2320: 2012-05-30 11:15:01.089 [Provider] [STAT] Un-Configuration took '0.0001109' second(s) total.
2320: 2012-05-30 11:15:01.089 [CBS] uninstalling 'MultipathIo ' ...
2320: 2012-05-30 11:15:02.072 [CBS] ...current state of 'MultipathIo': p: Installed, a: Installed, s: InstallRequested
2320: 2012-05-30 11:15:02.072 [CBS] ...setting state of 'MultipathIo' to 'UninstallRequested'
2320: 2012-05-30 11:15:02.431 [CbsUIHandler] Initiate:
2320: 2012-05-30 11:15:02.431 [InstallationProgressPage] Removing...
2320: 2012-05-30 11:15:14.067 [CbsUIHandler] Error: -2147023293 :
2320: 2012-05-30 11:15:14.067 [CbsUIHandler] Terminate:
2320: 2012-05-30 11:15:14.410 [InstallationProgressPage] Verifying removal...
2320: 2012-05-30 11:15:14.441 [CBS] ...done uninstalling 'MultipathIo '. Status: -2147023293 (80070643)
2320: 2012-05-30 11:15:14.753 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Multipath I/O'[STAT] Un-installation(s) took '13.3523268' second(s) total.
2320: 2012-05-30 11:15:14.753 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: False, Id: 57
2320: 2012-05-30 11:15:14.769 [Provider] Sync Message - OperationKind: UnConfiguration, MessageType: Information, MessageCode: 0, Message: <null>, AdditionalMessage:
<null>
2320: 2012-05-30 11:15:14.769 [Provider] Error (Id=0) Sync Message - OperationKind: Uninstall, MessageType: Error, MessageCode: -2147023293, Message: Attempt to un-install Multipath I/O failed with error code 0x80070643., AdditionalMessage: Fatal error during
installation
2320: 2012-05-30 11:15:14.769 [InstallationProgressPage] Sync operation completed
2320: 2012-05-30 11:15:14.769 [InstallationProgressPage] Performing post install/uninstall discovery...
2320: 2012-05-30 11:15:14.769 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
==============================
What is the trick the remove this multiIO feature ? Did I miss anything?
Thank you.
Hi.
I tried:
1. deleted the 2 files in C:\Windows\system32\ServerManager\Cache directory folder then restarted Server Manager to remove MPI/O - Failed.
2. Ran SFC and System Update Reainess tool. Found no error and then restarted server to remove MPI/O - Failed.
The Error message is similar to the orignal post. Here is the log
===============
3132: 2012-05-31 09:42:48.181 [InstallationProgressPage] Loading progress page...
3132: 2012-05-31 09:42:48.212 [InstallationProgressPage] Begining Sync operation...
3132: 2012-05-31 09:42:48.212 [Sync]
Sync Graph of changed nodes
==========
name : Multipath I/O
state : Deleted
rank : 1
sync tech: CBS
ant. : empty
pred. : empty
provider : Provider
3132: 2012-05-31 09:42:48.212 [Sync] Calling sync provider of Multipath I/O ...
3132: 2012-05-31 09:42:48.212 [Provider] Sync:: guest: 'Multipath I/O', guest deleted?: True
3132: 2012-05-31 09:42:48.228 [Provider] Begin un-installation of 'Multipath I/O'...
3132: 2012-05-31 09:42:48.228 [Provider] Uninstall: Guest: 'Multipath I/O', updateElement: 'MultipathIo'
3132: 2012-05-31 09:42:48.228 [Provider] Un-installation queued for 'Multipath I/O'.
3132: 2012-05-31 09:42:48.228 [Provider] [STAT] For 'Multipath I/O':
3132: 2012-05-31 09:42:48.228 [Provider] [STAT] Un-Configuration took '0.0001436' second(s) total.
3132: 2012-05-31 09:42:48.228 [CBS] uninstalling 'MultipathIo ' ...
3132: 2012-05-31 09:42:49.102 [CBS] ...current state of 'MultipathIo': p: Installed, a: Installed, s: InstallRequested
3132: 2012-05-31 09:42:49.102 [CBS] ...setting state of 'MultipathIo' to 'UninstallRequested'
3132: 2012-05-31 09:42:49.180 [CbsUIHandler] Initiate:
3132: 2012-05-31 09:42:49.180 [InstallationProgressPage] Removing...
3132: 2012-05-31 09:42:57.950 [CbsUIHandler] Error: -2147023293 :
3132: 2012-05-31 09:42:57.950 [CbsUIHandler] Terminate:
3132: 2012-05-31 09:42:58.293 [InstallationProgressPage] Verifying removal...
3132: 2012-05-31 09:42:58.324 [CBS] ...done uninstalling 'MultipathIo '. Status: -2147023293 (80070643)
3132: 2012-05-31 09:42:58.355 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Multipath I/O'[STAT] Un-installation(s) took '10.1042634' second(s) total.
3132: 2012-05-31 09:42:58.355 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: False, Id: 57
3132: 2012-05-31 09:42:58.371 [Provider] Sync Message - OperationKind: UnConfiguration, MessageType: Information, MessageCode: 0, Message: <null>, AdditionalMessage:
<null>
3132: 2012-05-31 09:42:58.371 [Provider] Error (Id=0) Sync Message - OperationKind: Uninstall, MessageType: Error, MessageCode: -2147023293, Message: Attempt to un-install Multipath I/O failed with error code 0x80070643., AdditionalMessage: Fatal error during
installation
3132: 2012-05-31 09:42:58.371 [InstallationProgressPage] Sync operation completed
3132: 2012-05-31 09:42:58.371 [InstallationProgressPage] Performing post install/uninstall discovery...
3132: 2012-05-31 09:42:58.371 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
3132: 2012-05-31 09:42:58.371 [CBS] IsCacheStillGood: False.
3132: 2012-05-31 09:42:59.354 [CBS]
===============
This is the CheckSUR log:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 15.0
2012-05-31 09:23
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 143
No errors detected
Please advise.
-Neil
Similar Messages
-
BR0252E Function remove() failed
While trying to extend the tablespace (PSAPCRM), I encounter an error :
BR1001I BRSPACE 7.00 (40)
BR0252E Function remove() failed for '/oracle/SID/sapbackup/.user.pas' at location global_set-5
BR0253E errno 13: Permission denied
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: seadhacx.log 2009-03-15 22.45.39
BR0280I BRSPACE time stamp: 2009-03-15 22.45.39
BR1007I BRSPACE terminated with errors
Any clues pls ?
Regards
ShajiHi Jacob,
Can you tell us with which user you are running?
I think there are some file permission are missing with that user id.
Please follow SAP NOTE 113747 to give sufficiant access privillages for BRTOOLS.
Regards
Nick Loy -
Product: Java X Update X.. removal failed or error status 1602
Hi
Managing several different environments I repeatedly run into the same error on "to many" computers.
We use SCCM as our primary distribution tool and install Java using the embedded MSI and a custom made MST.
End user platform is: Windows XP and/or Windows 7
The installs works flawlessly in 95% of all cases but the remaining 5% are still a big hurdle to have to handle manually.
Problem:
Installing the newest version returns error code: 1602.
For a long time I have been ignoring it since it generally means that the end user has cancled the installation. But upon furter investigation I have found out that this is not the case.
On the individual computer the eventlog actually reports: Product: Java X Update X.. removal failed or error status 1602.
It is the uninstall of the previous version that fails.
Does anyone know what causes this and possible a solution?
Best Regards,
ChristianThe same problem happened to me. When upgrading from JRE 1.5.0_5 to JRE 1.5.0_6, suddenly no applets would load, and all I could see was the little red X.
I tried to change proxysettings (I dont use a proxy, but it is told at http://www.java.com/en/download/help/redximage.xml that it is due to wrong proxy-settings). It didn't help.
I tried to turn off zonealarm. It didn't help.
I tried to clear the browsers cache. It didn't help.
I have been using both Firefox 1.5, and IE6. None would load the java-applets.
So I uninstalled all older JRE versions and installed JRE 1.4.1_02. It worked!
I then tried to upgrade to JRE 1.5.0. It didn't work.
Now I am back at JRE 1.4.1_02 without knowing why I had to downgrade through 6 versions that through the last year or so has been working fine on my machine.
I have no idea why it suddenly wouldnt work with the newer versions.
Any ideas?
Thank you. -
How to remove "removing failed" on Memory Card
I installed "bloomberg", "Financial Di..." and other applications on memory card.
I formatted my phone Nokia E71, but I forgot to remove on my phone. So when I push my memory card:
- "Bloomberg" and "Financial Di..." are in Menu/Installation, but I can not run. I remove them, my phone showed that "File corrupted".
- Some applications do not appear in Menu/ Installation, I opened Application Manager to remove them, but my phone showed that "Removing failed".
Please tell me how to remove these applications.
Thanks
Solved!
Go to Solution.I would have thought that formatting the card will get rid off those, back up your important stuff beforehand though.
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers -
Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”. - trying to remove account but get this message please help
Try to remove the account in the Internet Accounts preference pane.
-
SMICM : ERROR = remove failed: u2bdvsIsv5bMM7p1EXihbA vc2Ijq_E3SkUkWhu7U
Hi guys,
When checking the trace file under SMICM I have discovered the following error message :
[Thr 10] Wed May 21 13:50:39 2008
[Thr 10] *** ERROR => remove failed: u2bdvsIsv5bMM7p1EXihbA vc2Ijq_E3SkUkWhu7UwvNA [http_r3hdl_m 626]
Does anybody know more about this error and should I be worried or can this error be ignored??
Regards,
YammieHi!
Did you solved the error? We've found a similar error log on our environment.
REgards -
Remove failed when uninstalling onlie share 2.07
Can anyone please help (DO NOT WANT TO HARD RESET DEVICE)
Installed online share 2.07 now i cannot remove.
Remove Failed
Also does not show up in App Manager.
Installed on internal Memory.
Many Thankswhy do you want to remove it?
I ask this cause coincidentally i tried to remove it last night and got the same message cannot be removed
I just installed over it with the upgrade -
Hello all,
I have tried to remove online share 3.0 from my N95, BUT KEEP GETTING REMOVE FAILED.
I have tried removing from app manger and the only option is the online share upgrade which uninstalls successfully but I still have the Online share App in my menu.
Please assist.
This is installed on Internal memory.
This is my Second post as my first post vanished ?
Many ThanksHi,
I have the same issue with an N82. Why cant I simply use App Manager to get rid of it?
Is there some Nokia rule that we, the customers, are not allowed to choose what applications run on our own hardware?
I have absolutely no interest in this application and want it gone, I expect to be able to manage things that I own.
I am simply amazed that Nokia seem to think that it is reasonable to force this type of self serving software on us.
In my case I had a major bluetooth issue and basically had the phone replaced. When I got it back it had Share Online and "My Nokia" installed, and I want both gone.
I guess its time to choose a new platform - and I've only been using Nokia's since 1998.
If I sound frustrated, its only because I am still waiting for a supportive response from the company.
.... life goes on, but maybe with new applicances ( I buy for my company) -
Removing FAILED !! File is corrupt
yesterday i instaled some smartphoneware apps.after that i simply tried to uninstall an app,but all of a sudden it says REmOVING FAILED.when i went to INSTALLED APPS option,it was showing only PHONE MEMORY apps..THE PROBLEM continues ahead...i went to install any SIS app from MEMORY card,it says FILE IS CORRUPT !!!
PLSE FRNDS if YOU DO have any suggestions how to fix it ,then plse write !! WAITING !!!!Providing your Device details are always of MORE help.. but have a look at this thread that may help..
-
N96 - Remove Failed on Nokia Maps
Hi guys
So I have older version of Nokia Maps running on my N96.
I wanted to remove it.
I couldn't see it via App Manager, but I thought I can remove it by clicking on Options --> Remove from the menu.
I get "Remove Failed" everytime I do this. Is there another way of doing this? I don't really want to format my memory card for this.You can't remove it if it is embeded in the firmware. However, you should still be able to update to a newer version if that is what you are trying to do.
-
Dear all,
I know there are quite some threads regarding this issue. But I've been looking at all of them w/o any solution for my problem. Here we go...
I've followed all instructions for a Exchange 2003 to 2010 transition. All went fine to the point I'm trying to uninstall Exchange 2003 via Control Panel/Software/Remove. So far I did the following:
1. Move mailboxes to Exchange Server 2010 using Move Mailbox Wizard or Powershell => successfully
2. Rehome the Offline Address Book (OAB) generation server to Exchange Server 2010 => successfully
3. Rehome Public Folder Hierarchy on new Exchange Server 2010 Admin Group => successfully
4. Transfer all Public Folder Replicas to Exchange Server 2010 Public folder store => successfully
5. Delete Public and Private Information Stores from Exchange 2003 server => successfully
6. Delete Routing Group Connectors to Exchange Server 2003 => successfully
7. Delete Recipient Update Service agreements using ADSIEdit according to
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx => successfully
8. Uninstall all Exchange 2003 servers => fails with "Error code 0X80072030 (8240): There is no such object on the server"
I used the following articles while migrating to Exchange 2010:
http://technet.microsoft.com/en-us/library/bb288905(EXCHG.80).aspx
http://support.microsoft.com/kb/833396/en-us
http://www.simple-talk.com/content/article.aspx?article=882
and several more.
I looked into these forums regarding my problem and came up with:
http://support.microsoft.com/kb/283089/en-us
http://support.microsoft.com/kb/822931
I investigated the following possible reasons:
- homeMDB attribute (no references to my Exchange 2003 anymore)
- HomeMDBBL attribute (as described here
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmigration/thread/f0e3edd7-34e5-46b8-8061-1991aaffc30f) (no Information Stores available anymore as they have been successfully removed)
- msExchHomeServerName attribute (all pointing to my new Exchange 2010 server)
- the "famous" postmaster issue as described here:
http://support.microsoft.com/kb/283089/en-us (pointing to the new Exchange 2010 server)
In order to investigate all attribute related issues a utilized a VBS script resulting in an Excel sheet I was easily able to filter:
SET objRootDSE = GETOBJECT("LDAP://RootDSE")
strExportFile = "C:\temp\MyExport.xls"
strRoot = objRootDSE.GET("DefaultNamingContext")
strfilter = "(&(objectCategory=Person)(objectClass=User))"
strAttributes = "sAMAccountName,msExchHomeServerName,homeMDB,legacyExchangeDN,givenName,sn," & _
"initials,displayName,physicalDeliveryOfficeName," & _
"telephoneNumber,mail,wWWHomePage,profilePath," & _
"scriptPath,homeDirectory,homeDrive,title,department," & _
"company,manager,homePhone,pager,mobile," & _
"facsimileTelephoneNumber,ipphone,info," & _
"streetAddress,postOfficeBox,l,st,postalCode,c"
strScope = "subtree"
SET cn = CREATEOBJECT("ADODB.Connection")
SET cmd = CREATEOBJECT("ADODB.Command")
cn.Provider = "ADsDSOObject"
cn.Open "Active Directory Provider"
cmd.ActiveConnection = cn
cmd.Properties("Page Size") = 1000
cmd.commandtext = "<LDAP://" & strRoot & ">;" & strFilter & ";" & _
strAttributes & ";" & strScope
SET rs = cmd.EXECUTE
SET objExcel = CREATEOBJECT("Excel.Application")
SET objWB = objExcel.Workbooks.Add
SET objSheet = objWB.Worksheets(1)
FOR i = 0 To rs.Fields.Count - 1
objSheet.Cells(1, i + 1).Value = rs.Fields(i).Name
objSheet.Cells(1, i + 1).Font.Bold = TRUE
NEXT
objSheet.Range("A2").CopyFromRecordset(rs)
objWB.SaveAs(strExportFile)
rs.close
cn.close
SET objSheet = NOTHING
SET objWB = NOTHING
objExcel.Quit()
SET objExcel = NOTHING
Wscript.echo "Script Finished..Please See " & strExportFile
What I did find is that all my Exchange enabled users have an legacyExchangeDN attribute that is still pointing to my Exchange 2003 organization:
e.g. "/o=First Organisation/ou=First Administrative Group/cn=Recipients/cn=Administrator"
Could this cause any problems?
Now the in depth look into my "Exchange Server Setup Progress.log":
[09:33:06] Leaving ScPRQ_DoesNotContainLastMAPIMDBInMixedModeAG
[09:33:06] ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg (f:\titanium\admin\src\udog\excommon\prereq.cxx:3133)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckEVSPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:1358)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CCompServer::ScCheckPrerequisites (f:\titanium\admin\src\udog\exsetdata\components\server\compserver.cxx:955)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] CComExchSetupComponent::ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1598)
Error code 0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:06] === IGNORING PREVIOUS ERRORS === HrSetProblemOnInstallAction, while calling ScCheckPrerequisites (f:\titanium\admin\src\udog\bo\comboifaces.cxx:1399)
Der Vorgang wurde erfolgreich beendet.
[09:33:06] Ein Fehler ist beim Überprüfen der Voraussetzungen für die Komponente "Microsoft Exchange" durch Setup aufgetreten:
0X80072030 (8240): Ein solches Objekt ist auf dem Server nicht vorhanden.
[09:33:14] CComBOIFacesFactory::QueryInterface (f:\titanium\admin\src\udog\bo\bofactory.cxx:54)
I did search for:
- Error code 0X80072030 (8240)
- ScPRQ_ServerIsNotRUSResponsibleServerInTheNonEmptyOrg
Nothing so far. In case some more information is needed just let me know.
Any help would be greatly appreciated as I absolutely don't know how to remove my Exchange 2003. Manual removal is not an option.
AlexI kept on searching and found something else:
http://www.outlookforums.com/threads/33038-cannot-uninstall-Exchange-2000
It says that the following groups need to be resided in the AD's default "Users" organizational unit:
- Exchange Domain Servers
- Exchange Enterprise Servers
- Exchange Services Group
Unfortunately I cannot find the "Exchange Services Group". Does that have something to do with my problem?
Furthermore I found out that the Exchange 2003 has been originally installed with SBS 2003 back in time. The SBS 2003 has then be migrated to a regular Windows Server 2003 infrastructure with 2 DCs. But there still is a load of stuff reminiscent of SBS
2003 within the AD.
Then I dug deeper into my AD using ADSIEdit. I found another attribute homeMTA that is pointing to a corresponding Exchange server. After adjusting my aforementioned VBS script a was able to look into that attribute as well. I found 2 users pointing to my old
Exchange server within their homeMTA attribute.
Furthermore I saw that when trying to uninstall Exchange 2003 there is no path to my installation anymore. It's empty:
Another issue?
Regards
Alex -
How to remove failed mailbox move request
Hi all,
Exchange 2010 SP1
i canceled or move failed on several mailboxes. How can I move these mailboxes again since
they still have move request checked?
Thank you.Hi JaneHHH,
Here are some examples:
To just remove the failed moverequests in EMS, RUN Get-Moverequest -MoveStatus Failed | remove-moverequest
Move all moverequests in EMS, RUN get-moverequest | remove-moverequest
You can of course also remove them in EMC, but a simple right-click the once you want to move in EMC|Recipient Configuration|Move Requests and choose "Clear Move Requests"
:Martina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Hi,
There is an update on our server (2012) that keeps failing. Every 2 days it's scheduled to reboot and every time it's the same song & dance. Server reboots, configures update, gets to 98% and reverts it's changes.
How can I actually remove a failed update, so that I can break this cycle? ;) I can't even figure out which update it is that causes this :(
Thanks!
MaikeHi,
You could view the update failure information in Windows Update history.
If you want to remove the update failure information, you could refer to this blog:
Clear the Update Failure Information
http://blogs.technet.com/b/win7/archive/2011/10/18/clear-the-update-failure-information.aspx
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Remove failed DB copy/Add new mailbox DB copy
I have a DB copy that is in a "Failed and Suspended" state. The ContentIndexState is Failed and the ContentIndexErrorMessage is "Catalog is dismounted externally for database". I have attempted automatic reseeding of the DB
copy through the EMC and Management Shell using -CatalogOnly, but that hasn't fixed it. I am considering a manual reseed, but was wondering if it would be easier to remove the current DB copy and just setup a new one. The problem is that I have
never done that so I don't know if I can do it during production hours, without disrupting Exchange operations.
It seems as though I could remove the passive copy, make sure all passive log files are deleted, and then setup a new DB copy from the Active DB. Has anyone done this, or know of any potential problems that could come from trying it?
Thanks!
KevinOh, sure you can do that anytime. I am assuming your have enough server and network resources to handle it.
It does not disrupt the users on the active mounted database.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Remove failing 2003 DC - certificate help
I have ran into an issue where I am unsure of what to do.
I need to demote my 2003 domain controller. All FSMO roles have been moved to another 2008 DC.
The hardware is in such bad shape I don't trust rebooting it. As a test today I removed the network cable waited for issues to arise. I had a few issues with static dns entries. I had those all taken care of.
I noticed even before the removal of the DC I am getting these errors: on the two other DC's.
Certificate enrollment for Local system failed to enroll for a DomainController certificate with request ID N/A from DC01.DOMAIN.LOCAL\name.domain.com (The RPC server is unavailable. 0x800706ba (WIN32: 1722)).
Here is what I don't understand \name.domain.com dosen't match my domain.local I am not sure what this was used for. I took over this environment with no documentation.
Another issues that I am unsure of is my license sites settings inside of sites and services is set to the DC I am trying to remove from the environment. Will this be repopulated with the new DC after demotion?Hi,
>Here is what I don't understand \name.domain.com dosen't match my domain.local I am not sure what this was used for.
I have two guesses for this: the domain could be renamed or cross-forest certificate enrollment is involved.
>Another issues that I am unsure of is my license sites settings inside of sites and services is set to the DC I am trying to remove from the environment. Will this be repopulated with the new DC after demotion?
I am not quite sure about this question, are you saying that the DC which is going to be demoted is a license server? If so, since license server can be installed on a domain controller or a member server, therefore you don’t have
to change the license server. However, if the DC is in a bad shape, you can change the license server through Active Directory Sites and Services:
More information for you:
AD CS: Deploying Cross-forest Certificate Enrollment
http://technet.microsoft.com/en-us/library/ff955845(v=ws.10).aspx
Discover license servers
http://technet.microsoft.com/en-us/library/hh553158(v=ws.10).aspx
Change the site license server for a site
http://technet.microsoft.com/en-us/library/cc737307(v=WS.10).aspx
Best Regards,
Amy
Maybe you are looking for
-
I recently reimaged a brand new W510 w/WinXP w/SP3 & installed Lenovo Toolbox utility. Which immediately identified an issue w/the 1394 Net Adapter in Device Manager. Looking at the Device Status (details) it states "The Device Cannot Start (code 10)
-
Anchored Objects with text wrap, need vertical space
Hi. I'm a fairly new InDesign user and have just this past week learned about anchored objects, threading text frames, numbered lists, and some other fun options. So far InDesign has done most everything I need fairly elegantly. However, I have not
-
Can we create new tablespace in Oracle Database 10g Express Edition?
Hi, Can we create new tablespace in Oracle Database 10g Express Edition instead of using the default "users" tablespace provided? Please advise. Thank you.
-
GAP on credit control very important & tricky
1. Create a sales order with quantity 1 2. Order is blocked because of credit limit check. 3. Release sales order and delivery is created 4. Change order amount on VA02 for this sales order as 10.000 Displays the following warning m
-
Hi, for example - I have a table element and one of its coloums is of type TIME. The automatic field validation (only valid times allowed) is working fine, but now i need to check that only full and half hours are entered. So if the user enteres "11: