Multipe customer numbers under a single snc saprouter

We have a concern regarding saprouter (snc type) and customer numbers.
We are a consulting company providing application hosting for 3 of our customers running SAP systems. All of these systems are hosted in a data centre at our premises. Presently we have 3 separate saprouters for each customer and these 3 customers have separate SAP customer numbers.
Inline with our server consolidations efforts, we are planning to merge these 3 snc saprouters into a single saprouter. While we understand that due to the generation of snc cert which is based on customer number, every saproute cert is unique to that particular customer, are there any work arounds for this? Have there been any solutions for other companies having the same issue i.e. having multiple customers in the same data centre and sharing saprouter?
Please advise the best solution forward to consolidate saprouters.

Hi Stephen,
Question: Can the SAProuter be on the internal network with a private IP address but accessed by via the Public address of our firewall and proxied through?
yes, no problem, just a port forwarding for this one port 3299 for insite and NAT for outsite is required!
Question: Must all these ports be opened? Elsewhere Volker has stated only one port is required to be opened through the firewall.
ONLY port 3299 - I did several setups this way )
Question: Exactly how secure is this connection? What measures have others taken to protect the connection.
As save as a 128 Bit certificate is - by now I didn't hear on breaking that => it is safe with state of the art )
(I would imagine VPN is 128 Bit "only" as well)
=> really go for that ....
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B

Determine the customer numbers for which the installations

Dear All,
I configured VAR Service Desk on SolMan EhP1 + SPS 20, Everything is good, but I have a problem when run report AI_SC_GET_SAP_CUSTOMER_NUMBERS. It can determine my customer numbers, but have only my installation number in table V_AIINSNRS. There are no any installation number of my customers in table V_AIINSNRS .I need installation number of my customer are included in V_AIINSNRS. Please show me about that. Thank you very much!
Thanks and Best Regards,
Tru Hang

Hello,
This is the text from the SPRO activity help:
1.3.9.3.3 Data Transfer from SAP
Use
You can copy the following system data from SAP into the System LandscapeMaintenance (SMSY):
- Name,
- System number,
- Installation number
- Product version.
All data can be copied from SLD or RFC connection. This is an alternative for service providers who
have no, or only restricted, connection to their customers via SLD or RFC.
Requirements
You have determined or maintained the customer numbers for the systems to be generated.
Default Settings
The system automatically generates IBase components, which you need for the Service Desk and Change
Management scenarios. If you do not want IBase to be generated automatically:
1. Choose the transaction DNO_CUST04.
2. Deselect the field: IB_GEN_AUTO (description: Automatic IBase Generation).
3. Save.
Activities
Set Automatic Generation flag
You can:
1. Generate all systems per customer number, or
2. Generate systems per installation number
Case 1: Flag/check whether all systems with a customer number are to be generated, and maintain the
maintenance view V_AISAPCUSTNOS. In this case, the system ignores the flag at installation level.
Case 2:If you select installations for which systems are to be generated, maintain the maintenance view
V_AIINSNRS.
Maintain Settings in SMSY_SETUP
4. Choose: Edit -> Expert Settings.
5. Enter the value A or N for the option Generate Systems by OSS:
- A: Systems are only generated if a 3-digit alpha-numeric ID has been specified for the customer
in maintenance view V_BP_SPC, to distinguish the long names of systems with different
customer numbers, e.g. a system SOL for the customer SAP would be SOLSAP01.
- N: New systems are numbered sequentially when they are generated. System SOL would be
SOL00001.
6. Save.
Data is created by background job REFRESH_ADMIN_DATA_FROM_SUPPORT , which
should be scheduled regularly. If you want to copy the data immediately, you can schedule it
immediately . Check in the job log of transaction SM37 that it ran successfully.
Note: The user under which the job runs must be in the table AISUSER , with authorization for
system data maintenance in the SAP Support Portal.
I hope this information helps.
Best regards,
Miguel Ariñ

Solution and multiple Customer numbers

Dear all,
while setting up new systems in our existing Solution I encounter the problem that I cannot synchronize data with the SAP SMP. The reason is that the S-User maintained in the Solution Settings is not existing in our second SAP Customer Number under which the new systems are installed. However it does not seem to be possible to create two identical S-User Numbers under two different customer numbers. As I don't see an option to define more than one S-User for a Solution I assume that a second Solution needs to defined which then includes the new systems.
From my feeling this is not a comfortable way to resolve this issue, maybe you have a hint how I can keep my existing Solution and synchronize the new systems in there as well?
Thanks a lot for your help!
Christian Schmidtmann

Dear Christian,
This is not possible. Only one S-User ID to one Customer Number per solution.
Please see http://www.service.sap.com and then click the Registration link on the top right hand side (top).
Hope this is helpful.
Regards,
Paul

SEND_SYSTEM_RELATIONSHIP_TO_SUPP job fails with "No customer numbers ..."

While executing SOLMAN_CONNECT tcode, I get the error
SEND_SYSTEM_RELATIONSHIP_TO_SUPP job fails with "No customer numbers in transaction AISUSER".
SAP note
Note 1351731 - Termination SEND_SYSTEM_RELATIONSHIP_TO_SUPP/SOLMAN_CONNECT
says problem fixed against ST 400 with SP SAPKITL431.
I'm running NW 7.0 SPS 15 which has ST 400 SAPKITL425.
I need to get SAPKITL431. but when I search SWDC for this package, I can only find SAPKITL430. I need to get SAPKITL431 in the download basket and have someone at SAP to turn off the MOPZ requirement so I can use DLManager to get the SP dlownloaded and installed. Are there other dependent SPs required. Or am I better off downloading SPS 16 or later.
I need the MOPZ requirement turned off for this until I can get the fix and get MOPZ up and running.

Hi Andreas,
AISUSER was unchanged, which contained the S-user # for user DDIC and myself.
I went thru the steps in note 1140822, eventhough I had turned off BAdI months ago when I was setting up the RFCs for SAP-OSS. I maintain just one S-User. Therefore followed option 2 in the note.
Trying to implement snote 114822.
An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
Exception of class CX_SY_NO_HANDLER
An exception of type 'CX_SY_OPEN_SQL_DB' occurred, that was not caught anywhere in the call hierarchy. It was not handled locally or declared using a RAISING clause.
TC SE19 shows AI_SDK_SP_RFC_RP as active.
Selected New BAdI and Display.
Re-executed note 1140822 and it worked this time. Apparently, the display of AI_SDK_SP_RFC_RP activated this implementation.
Snote 1140822 completed. I set process status to completed.
I reran MOPZ under tc solution_manager. I now get a different error. ERROR: E:/TMWFLOW/MO_BACKEND:025.
I forced a run immediately on SEND_SYSTEM_RELATIONSHIP_TO_SUPPORT, whcih ran successfully NOW.
Now MOPZ runs fine and I can see my files to download. I did not have any logical systems to select, but MOPZ did pickup some patches anyway. Not sure why no logical systems at this point. I defined a few logicals for both SM and satellite systems. I'll address this issue separately and open new thread, if need be.
The one question that remains is using SE19 to display status of AI_SDK_SP_RFC_RP appears to of activated it. Is this right? It fixed something such that now the applying the snote worked in de-activating it.
Thanks for all your help.
-Don Isler - HP SAP CC.
P.S. Is there a way I can upload or email you a word doc that has my screen shots and details of what I tried?
Edited by: Don Isler on Jul 29, 2009 1:36 PM

How to register custom report under Custom Development Application

Hi 2 all
How to register custom report under the Custom Development application in R12 vision DB, and also confirm location/folder of Custom Development application in R12.
Thanks
Zulqarnain

Hi,
You may or may not need to "register" the workflow - it depends on the changes that you made and which Item Type you modified. Some applications are essentially hard-coded to use a specific item type and process, some hard-coded to use an item type but you can configure the process to use, and some allow you to specify which item type and which process to use.
Without knowing exactly what you have done, though, there is no specific advice that anyone can give you here on what you need to do, apart from to ensure that you have saved the new definition to the database.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

How to add two different page numbers in a single page

How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Business partner creation - Not in sync with customer numbers -

Hi All
I am trying to do the BP conversion in collections management.
The customer number range for account group ZXXX is (80000 to 89999) and the external number range flag is not selected.
I have created created a number range Y2 through BUCF, with numbers from (80000 to 89999), I did not choose external flag, thinking it should be same as customer number range. I have created a BP group ZXXX and assigned this number range Y2.
Later when I did the BP conversion through MDS_LOAD_COCKPIT, I observed that the BPs are not in sync with the customer numbers.
So my question, should I have choosen external number range flag in BUCF, even though its not selected in the customer number range? Has this caused the issue?
Please help me understand this and rectify this issue.
thanks in advance.
Krishna

Hi Christobal,
Thank you so much for you response.
As suggested, I have checked BP number range as external. Later when I ran MDS_LOAD_COCKPIT, I get the below messages
Grouping ZXXX has external number assignment, enter a number
Partner data processed with key PartnerGUID 4E1BD7375F080AE0E10080000A5B030E
Grouping ZXXX has external number assignment, enter a number
So is there any other setting which I might be missing?
Please advise.
Thanks
Krishna

Activities in Finance that involves moving of customer numbers

Hi,
I would like to know what are the activities in SAP that are involved with transferring of customers numbers ?
We are having some business shifts that we are renumbering our customer numbers from non-standard numbering to a standard numbering range of XX-series. Apart from AR balance transfer what else should be taken care of from finance ?

Hi bmjunar,
Here are some general links that might be helpful as you try to use Softmotion and SolidWorks:
http://zone.ni.com/devzone/cda/tut/p/id/9566
http://www.ni.com/virtualprototyping/training.htm
Best Regards,
Michael B.
Applications Engineer

Contacts with multiple numbers under the same labe...

i
I have many contacts which have numbers saved under the same label.
For example a contact like this:
First name: A
Mobile: 11
Mobile: 22
Telephone: 33
Telephone: 44
When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows:
A
Mobile: 11
Telephone: 44
Mobile (other): 22
As you see it deleted one of "Telephone" labeled numbers. It also happened when I used PC suite.
It is really annoying as if I save/sync the contact using Ovi, it causes loss of contacts data.
BTW there is no problem using Backup/Restore function of Ovi/PC suite, nor "Copy to memory card" function of the phone itself.
Ovi suit version : 2.1.1.1
Nokia E51 v300.34.56
Windows 7
PS:
tested another one with 6 different numbers under the same "Mobile" label
the result in Ovi is:
AA
Mobile: 11
Mobile (main): 33
Mobile (other): 22
the other 3 numbers were lost

atammin wrote:
Ah, you have an interesting setup here.
Could you answer a few clarifying questions regarding this.
> When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows
* Did you perform a sync? Or did you just connect the phone and look at the contact card in the phone view?
I had performed sync before and realized that some contact data are missing in my phone, so I started investigating to see exactly which contacts are affected by creating some dummy contacts and editing them by clicking on my phones icon below the window of "Contacts" tab in ovi.
* Did you check the contact in your phone (using the phone's UI)? Were all the details there - or are you saying that Ovi Suite lost some of the details?
In fact both. Ovi fails to extract and show some numbers and thus fails to write them back to the phone correctly. The lost details are purged from the phone too.
Just to confirm I've understood the scenario correctly
1) you have contact card in phone with two mobile numbers (same label) and two telephone numbers (same label)
yep
2) you sync with Ovi suite
Either Sync or directly open and save contact.
3) the mobile numbers have been re-labled to Mobile and Mobile (other) but the numbers are preserved
They are re-labled only when viewed in Ovi, but written back to the phone with the same "Mobile" lable as created on the phone.
4) one of the Telephone numbers is completely lost from Ovi Suite and phone.
And this scenario happened with this setup:
- Ovi suite version : 2.1.1.1
- Nokia E51 v300.34.56
- Windows 7
I just want to be clear on the setup and scenario so we can investigate.
thanks, Aki
I also done another test
This is the contact created in phone:
BEGIN:VCARD
VERSION:2.1
N:;A
TEL;CELL:11
TEL;CELL:22
TEL;CELL:33
TEL;CELL:44
TEL;CELL:55
TEL;CELL:66
TEL;VOICE:11
TEL;VOICE:22
TEL;VOICE:33
TEL;VOICE;HOME:11
TEL;VOICE;HOME:22
TEL;VOICE;HOME:33
TEL;VOICE;WORK:11
TEL;VOICE;WORK:22
TEL;VOICE;WORK:33
X-CLASSrivate
END:VCARD
And this is what happens to contact when I just click edit and then save in Ovi.
BEGIN:VCARD
VERSION:2.1
N:;A
TEL;CELL;PREF:11
TEL;CELL:33
TEL;VOICE:33
TEL;VOICE;HOME:33
TEL;VOICE;WORK:33
END:VCARD
I also attached what ovi shows about this contact as an image.
Attachments:
displayed in ovi.PNG ‏9 KB

Office 365 - sharepoint: In Advanced search Page, How to add custom column under property restrictions

In Advanced search Page, How to add custom column under property restrictions?

Hi,
The Navigation control can be added into your HTML page in the Snippet Gallery:
The two links below about how to create HTML master page and adding snippets needed into it for your reference:
http://borderingdotnet.blogspot.jp/2012/12/how-to-create-html-masterpage-for.html
http://msdn.microsoft.com/en-us/library/office/jj822370(v=office.15).aspx
Feel free to reply if there still any question.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

When making a photo book in Aperture. How do you eliminate having the image numbers under the pictures?

When making a photo book in Aperture. How do you eliminate having the image numbers under the pictures?

Click the "Book Actions" cogwheel and select "Page Numbers " -> "Off"
Regards
Léonie

Granularity of authorisation to specific customer numbers required in VA01

Hi SAP SECURITY community,
We need to be able to restrict a particular user to do the following.
1) In VA01, the user should have change, create, display rights when accessing a certain customer number,
2) But when accessing all other customer numbers, that same user should only have read rights.
I beleive this is possible through authorisation groups. Could any of you guys pls provide a step by step practical procedure of how we can accomplish both 1) and 2).
<removed_by_moderator> Thanks a lot guys !!!
regards, Vikram
Edited by: Julius Bussche on Mar 11, 2008 4:31 PM

what are you calling authorization groups??? i'm not sure i can place that thing ...
anyway: not possible, we tried - look here´.

Query to skip special customer numbers while auto generation

Hi
I have a customer number maintenance screen refering table STTMS_CUSTOMER_SRNO_BANK, where customer number is auto generated.
Table:STTMS_CUSTOMER_SRNO_BANK columns are
CUSTOMER_RUNNING_NO , USED_FLAG
Present queries are:
SELECT MIN(customer_running_no)
INTO l_no
FROM sttms_customer_srno_bank
WHERE used_flag = 'N';
SELECT customer_running_no
INTO l_running_no
FROM sttms_customer_srno_bank
WHERE used_flag = 'N' AND customer_running_no = l_no
FOR UPDATE NOWAIT;
Current logic is it takes MIN(customer_running_no) and USED_FLAG is 'N'.
Now an enhancement is to be added that a new table CSTM_CUST_CATEGORY where a range of numbers is reserved for a special classification of customers.
Table:CSTM_CUST_CATEGORY
CUST_CATEGORY START_RANGE END_RANGE
ROYAL 1 100000
VIP 150000 200000
I need to write a query to auto generate customer numbers and the auto generated numbers should not fall in the special customer category like ROYAL,VIP,ie it should not be in the range 1-100000 and 150000-200000.
Please help me to write this query.
Thank you
Mary

Thanks a lot
This query works and serves half my requirement.
Ex..i have customer_running_no from 1300 to 1350 where used flag set to 'N'
and the start_range and end_range I have given is 1300 to 1500.
Now this query skips 1300 to 1350.It gives 1351.But my actual requirement is it should give 1501 as the next customer_running number.May I know what modification should i do to this query to get this expected result.

Personnel numbers under a given payroll area

can anyone let me know any macros/ fm / utility that gets the personnel numbers given a payroll area , begin date and end date ?
How to get the personnel numbers under a given payroll area , is it okay if simply by looking in table PA0001 ?
Thanks!
Uma

Please read this -:)
<a href="/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports to deal with HR Payroll reports</a>
Greetings,
Blag.

Multipe customer numbers under a single snc saprouter

Similar Messages

Maybe you are looking for