Multiplanning area ZMSMELT cannot be used

Hi Guru's
Hoping someone can assist.
I modified a InfoCube by removing key figures as well as time characteristics not being used, I have tested the changes on the BW side which seams 100%, but for some reason in Business planning get strange errors.
I have a few basis planning areas linked to the InfoCube which I then use a few multi planning areas. The problem is after I changed the InfoCube , I now get the error message on all the multi planing areas containing the basis area linked to the modified InfoCube about a certain key figure (in this case 0QUANTITY), the strange thing is, I do want to use that key figure, and therefore did not touch it when modifying the cube, so it is still part of the cube untouched and do exist.
The moment I remove the "problem" basis area from the multi, all seams to be fine, but off course I need to plan on that area.
I am not to sure what the error message relates to regarding "Technical Attributes", any assistance will be greatly appreciated.
Herewith the detail error message
Multiplanning area ZMSMELT cannot be used
Message no. UPC223
Diagnosis
Key figure 0QUANTITY appears in several base planning areas and has different technical attributes there (type, currency/unit of measure, aggregation). This case can then occur if the base planning areas refer to different RFC destinations. However key figures with the same name from different planning areas, can only be included in a multiplanning area, if they have the same technical attributes.
Procedure
Create characteristic 0QUANTITY in all affected systems with the same technical attributes.
Edited by: Rudi Hattingh on Oct 19, 2008 11:39 AM

Hi,
After editing the Infocufe, Go to BPS0, and edit the basic planning area created on this cube and verify whether 0Quantity is present or not.
Check the multiplanning area, and see which are the other basic planning areas involved.
Check the other basic planning areas. Are the infocubes in another source system. If yes, then the definition of the keyfigure might be different in the different source systmes. That you need to verify. If not, edit the multiplanning area and try to continue with your operation.
Please award points if helpful.

Similar Messages

I have installed Adobe Reader 11.0.07 for Mac OS 10.9.3. Have asked this question numerous time without results. The problems I am having are: I cannot scroll using the side slider on downloaded PDF files, nor can I fill in fillable files. Also, and this

I have installed Adobe Reader 11.0.07 for Mac OS 10.9.3. Have asked this question numerous time without results. The problems I am having are: I cannot scroll using the side slider on downloaded PDF files, nor can I fill in fillable files. Also, and this is extremely irritating, I cannot re-initialize the same file or initialize and another PDF file after I have initialized the first file. If you cannot help please let me know if should use an earlier version of Reader or find anther company that has the appropriate software.

Perhaps you missed that you started a discussion at I have OS 10.9.2 and have downloaded latest version of Reader 11. I can no longer fill in form or scroll using the side bar. and you did not respond to the last post there.

Multiplanning Area cannot be used

Hello gurus!
We migrated from BW3.5 to BI 7.0. And we are testing in SANDBOX, we are using the transaction BPS0 for planning, but I have a problem with a Multiplanning area....I got this message: "Multiplanning area CMXSD003 cannot be used"
The message log says:
Multiplanning area CMXSD003 cannot be used
Message no. UPC223
Diagnosis
Key figure 0AMOUNT appears in several base planning areas and has different technical attributes there (type, currency/unit of measure, aggregation). This case can then occur if the base planning areas refer to different RFC destinations. However key figures with the same name from different planning areas, can only be included in a multiplanning area, if they have the same technical attributes.
Procedure
Create characteristic 0AMOUNT in all affected systems with the same technical attributes.
I have 8 planning areas, and I don't use the key figure 0amount in 3 areas...But in the rest of the areas, the 0amount has the same technical attributes.
Besides, in BPS0 in 3.5 I can access to the multiplanning area without problem.
I need your help!!!!....any ideas???
thanks!!!

Hi,
After editing the Infocufe, Go to BPS0, and edit the basic planning area created on this cube and verify whether 0Quantity is present or not.
Check the multiplanning area, and see which are the other basic planning areas involved.
Check the other basic planning areas. Are the infocubes in another source system. If yes, then the definition of the keyfigure might be different in the different source systmes. That you need to verify. If not, edit the multiplanning area and try to continue with your operation.
Please award points if helpful.

When I want to organise my bookmarks most of the options are greyed out and cannot be used including create new folder! Help

'''''''''bold text'''''''''
When i want to organise my bookmarks most of the options on the organise bookmarks menu are greyed out and cannot be used - including create new folder etc. Help please.

Make sure you are not in the Private Browsing Mode:
File > Private Browsing is UNCHECKED.

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

Try Here > AMDS > http://support.apple.com/kb/TS1567

Users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply

Hi All,
Please help me.
I have an issue where users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply. But they are can set Out Of Office automatic reply from OWA. My exchange server is Ms Exchange 2010.
The test E-mail AutoConfiguration failed with this error:
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12175; httpStatus=0.
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12007; httpStatus=0.
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Local autodiscover for mydomain.com starting
Local autodiscover for mydomain.com Failed (0x8004010F)
Redirect check to http://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
Srv Record lookup for http://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x80072EE7)
Srv Record lookup for mydomain.com starting
Srv Record lookup for mydomain.com Failed (0x8004010F)
Any idea?
Thanks,
Pieter

OK.
Please follow this step.
1. As you said you are in coexistence step , so for now all endpoint already point to Exchange 2010 right?
2. Check legacy owa redirect that you already configure
3. In Exchange 2010 , Make sure that you already configure "Autodiscoverinternaluri" by this command set-clientaccessserver -identity "servername" -autodiscoverinternaluri
https://autodiscover.domain.com/autodiscover/autodiscover.xml. and don't forget to create autodiscover record in DNS
4. in Exchange 2010 , Make sure that you already configure "EWS" path by this command set-webservicesvertualdirectory -identity "XXX\Default web site name" -internalurl
https://yourinternalurl/EWS/Exchange.asmx -externalurl https://yourexternalurl/EWS/Exchange.asmx
5. don't forget to replicate freebusy from Exchange 2003 to Excahnge 2010 via public folder.
You error look like client cannot get autodiscover process please check it again.

My bookmarks are gone, I can not create new bookmarks, I cannot navigate using the back button

I am running Mac OSX 10.5.8 and Firefox 3.6.13. Yesterday, after I had been on the internet multiple times, I opened Firefox and my Booksmarks toolbar and navigation toolbar were both empty. My booksmarks don't exist when I open the Organize Bookmarks window. My history is also gone. I cannot navigate using the backbutton. I restarted Firefox and there was no change; restarted my MacBook had no effect. I searched for similar problems and tried opening Tools > Add Ons> Extensions, but there is nothing on that screen, and the 'Find updates' button can not be clicked. It is not keeping me logged into pages that I have been previously logged into, but it does remember passwords. If there are other problems, I have not encountered them yet.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

TS3276 Someone who receives my mail sent from Apple Mail cannot receive attachments or read my email even though they are on a Mac using Safari. How could they be using Safari to receive or read my mail?

Someone who receives my mail sent from Apple Mail cannot receive attachments or read my email even though they are on a Mac using Safari. How could they be using Safari to receive or read my mail?

You can lead a horse to water, but you cannot make it drink. This person receiving my email, while on a Mac with Safari is reading their mail through Safari using Horde--our recent discovery. Why they chose to do that in unclear. The last email we sent, however, was miraculously read and received and the attachment was viewed with no problem after we told them our mail was coming from a Mac thriugh Apple Mail. It seems that telling them that our emails were coming from a Mac and using Apple Mail was enough to make them think that perhaps THEY were doing something not quite right. Thank you both, Level 7 and Level 5.
But thank you especially for the meteorologists in the UK for putting forth the correct routes for Sandy these last days, you probably saved a lot of lives.

Please tell me what media i need or i need to update to transfer videos from iphone to pc xp ... i used to i think but cannot anymore using kodak transfer, photos are ok

please tell me what media i need or i need to update to transfer videos from iphone to pc xp ... i used to i think but cannot anymore using kodak transfer, photos are ok

See the Windows XP section near the bottom of iOS: Import personal photos and videos from iOS devices to your computer
Also, note the following quote from near the top of that section:
Windows XP can't import video files larger than 500 MB using Camera and Scanner Wizard. You can transfer these files from your device by selecting them in My Computer and dragging or copying the files to your computer's hard drive.

Repost on MultiPlanning Area

Hi Guys,
Do you know of any workarounds we could use to build a repost planning function on a multiple planning area in SEM BPS. I know you cant normally do this but can this be achieved through using a planning function but can we achieve this passing values through an exit function.
Regards,
VK

hi
Standard Planning Area means u can assign one info cube i.e. data basis to planning area and the same info cube cannot be assigned to another planning area.
Combination/Union of different planning areas/cubes is called MultiPlanning Area.
Like Multi Provider in BW.
In Multo Planning Area: Physically u don't have any cube, But at the time of creation we select set of planning areas. In Multi Planning Area also u can hv all planning objects like Planning Levels/Packages/Layouts/Functions etc. as standard Planning Area. The data availability from all planning areas.
Mainly Multiplanning Area is used to refer one cube (i.e. Basic Cube) and plan
data in Transactional Cube.
For eg: if u hv 2006 actual data (i.e. R/3) in Basic Cube and to Plan For 2007.
If we use Standard Planning Area u need to load 2006 actual data first into Transactional Cube then plan for 2007. U will hv both years data in ur transactional cube.
But If u use multiplanning area, u need not load into transactional cube but u can refer basic cube data (2006actual) and plan for 2007. Finally u will hv only plan data in ur transactional cube and the perfornance also will be good.
For any further queries , u can send a message
tx
srin

Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.

Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.

Where are you physically located?
What country's Store are you using?
The two have to be the same and the payment method for your account also has to be associated (billing address, where iTunes gift card was purchased) with that country.
Has the ID(s) worked before for purchases for this country's store?

SSRS Execution Account cannot be used with Report Builder

Running SQL Server 2012 SP2, I have specified an Execution Account in Reporting Services Configuration Manager as described here: http://msdn.microsoft.com/en-us/library/ms156302(v=sql.110).aspx
The article states: "You can specify Integrated Security=SSPI if the database server supports Windows integrated security and the account used for unattended report processing has permission to read the database." I have created a data source using
the Report Manager Web interface with connection string: "Data Source=<server>;Initial Catalog=<database>;Integrated Security=SSPI" and "Connect using: Credentials are not required" option.
The Execution Account is a domain user account with db_owner membership on the database in question. When I "Test Connection" in Report Manager, the connection is created successfully.
However, when I attempt to create a new dataset using this data source in Report Builder, I am unable to connect to the data source: "You have specified integrated security or credentials in the connection string for the data source, but the data source
is configured to use a different credential type. To use the values in the connection string, you must configure the unattended report processing account for the report server."
If I change the "connect using" option for the data source to "Windows integrated security" I can successfully create a new dataset and report in Report Builder. After saving the report, I reconfigure the data source for "Credentials
are not required" and I am able to successfully run the report using the Execution Account.
Is this a known limitation? The Report Builder cannot be used with an unattended Execution Account configured?

Hi desmondgc,
According to your description, you have set the execution account for connecting data source. You can connect data source successfully, but can't create dataset with the unattended account. Right?
As we tested in our local environment, we encountered the same issue. Even testing connection successfully in Report Builder, it still says unable connect to data source when creating dataset.
For this issue, I would recommend to submit it to the Microsoft Connect at this link
https://connect.microsoft.com/SQLServer/Feedback.
This connect site will serve as a connecting point between you and Microsoft, and ultimately the large community for you and Microsoft to interact with. Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you
can learn more about and contribute to the exciting projects on Microsoft Connect.
We will keep you updated if we find something, thank you for your posting.
Best Regards,
Simon Hou

This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

I just bought an iPhone 5, and tried to sync it to my iTunes account but when connected it says: "...cannot be used because it requires iTunes version 10.7 or later." However when I try to get iTunes to update it says: "This version of iTunes (10.6.3) is

I just bought an iPhone 5, and tried to sync it to my iTunes account but when connected it says: “...cannot be used because it requires iTunes version 10.7 or later.” However when I try to get iTunes to update it says: “This version of iTunes (10.6.3) is the current version.” Can anyone help?

filterc-r wrote:
Thanks for your reply. My Mac is running 10.5.8: it's 4 years old. When I try to update the OS software, I'm told there are none available.
Be careful - there's a difference between update and upgrade. Your machine is saying there are no updates available, meaning no later versions of OS X 10.5 (Leopard). However, you can very likely upgrade - at least to OS X 10.6 (Snow Leopard), and possibly then to OS X 10.8 (Mountain Lion).
Updates are free, but upgrades cost a bit. That's the dirference.

Cannot be used because it requires iTunes version 10.6.3 or later.

I updated my phone and now when I try and update my podcasts, etc I get this message:
The iPhone “John Mott’s iPhone” cannot be used because it requires iTunes version 10.6.3 or later. Go to www.itunes.com to download the latest version of iTunes.
When I try and update iTunes it tells me I'm up to date.
How do I fix it?
Why did I update? I use Apple because MS always does this. C'mon already!

I'm having a similar problem. Perhaps more complex. I just downloaded the 10.6.3 and it didn't solve the problem for my iPhone 5.
I have the new iPhone 5 and iTunes is asking for iTunes 7.0 in order to recognize the phone. I tried to download iTunes 7.0 but an error comes up stating that I need the 10.6.8. Well I tried to download the 10.6.8 and an error message came up saying that I need minimum of 10.6. So now I'm confused....
These are the error messages in order.
1. The iPhone “iPhone” cannot be used because it requires iTunes version 10.7 or later. Go to www.itunes.com to download the latest version of iTunes.
2. This update requires Mac OS X version 10.6.8 or higher.
3. This update requires Mac OS X version 10.6.
Will I have to pay for the 10.6?
Thanks so much in advance.

Multiplanning area ZMSMELT cannot be used

Similar Messages

Maybe you are looking for