Multiple 0's displaying in Alert Monitor Screen SNC 5.1

When I display the alert monitor in SNC 5.1 and select one of the alert types, they quantity fields are displaying multiple zero's after the number. Has anyone seen this?

Thanks to both of you for the speedy response. I have already seen that article, as well as 790397.1 - PROCESS J000 And M000 Die [ID 790397.1]. I'm just a little confused as to why Oracle is saying it's an out of memory condition when there's nothing in the log or trace files (other than the condition matches a couple of articles they have) that support the conclusion. Don't get me wrong, I'm certainly not an Oracle on Windows expert, most of my stuff revolves around Linux/UNIX and I avoid anything windows like the plague, other than starting a putty session.
My understanding is that each process in a windows 32bit environment gets a 4GB Virtual Address Space, which is split into a lower 2GB application space and an upper 2GB kernel space. If the trace file is showing that only 1.6GB of physical memory has been consumed, wouldn't this indicate that there isn't a single process on the server that is even close to reaching it's 2GB limitation?

Similar Messages

Multiple video streams displayed on separate monitors

I'm working on a project that will have 6 screens showing 6 different pieces running simultaneously. We'll be cutting all 6 pieces in FCP, but i was wondering if there is anyway to view multiple video streams on 6 different displays running at the same time in FCP? Obviously some sort of display hub or router needs to be had, or perhaps some other hardware/software.
Anyone have any great ideas?

My old video professor from school did a lot of video installations. He often had trouble keeping multiple DVD players in sync with one another, they would drift over time. If you are thinking about the DVD player route, make sure you're using the exact same model for each player, and make sure to run tests over a long period of time.
Of course, using an external genlock would probably prevent that, too.

MBP wont display 1080p on monitor any more

I have an early 2011 Macbook pro and a hp 2511x monitor. The setup worked flawlessly before I went off to school. Now that Im back home my macbook wont display 1080p on the monitor, only 720p. While attempting to display 1080p the monitor screen is blank but I am able to move my mouse over to the external dispaly just fine, just no picture. My mac will display 1080p on other external monitors & the monitor will work fine with other computers or xbox on 1080p.
Just upgraded from 10.7 to 10.9 and still not working properly.
Connecting from mini display to hdmi
Thanks!

Hey adz2k14!
Here is an article that will help you troubleshoot this issue with your AirPlay functionality:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Alert Monitor with exceptions in WAD

Hi All,
I'm trying to use alert monitor in web application designer to show two queries with red, green and yellow statuses. In my web template, I have inserted two queries in two tables (both queries have exceptions) and alert monitor as web item. In properties(context menu), I choose infocube on which these queries are build,marked the red, yellow, green status ,mentioned them in list of columns entry and checked the display toolbar entry.
When I execute , It shows the display of alert monitor drop down box with functions (from Info provider, info area, queries..etc) and alert boxes for red, yellow and green. If I check on red box and uncheck other boxes, still I'm seeing all records with other status as well. There is no change in the query result if I switch from red , green or yellow. And also I am not seeing how many rows of red , green or yellow alerts which i should as i have selected in the list of columns entry.
I've set the exceptions in Reporting Agent for these two queries also.
Any Idea why I'm not getting the functionality of alert monitor. Do I need to set up something for alert monitor to work in reporting agent or in alert management in order to use .Am i missing something in configuration
Any ideas and solutions..
Thanks in advance,

LauQ,
Did you figure out the solution?? Is it something to do with the settings of exceptions in reporting agent. I strongly feel so, as the configuration for alert monitor is straight forward in WAD. There is a How to Guide document on..How to Intergrate BW reporting agent with Alert Framework. Did you have a look at it. I'm glancing it right now.. You can find in sdn.. May be that helps.. Please let me know if you get something... I'm still working on this issue..
Thanks ,
Veeru

I need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

i need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
Regards.

The display on my monitor is too large (can't fit the whole screen on my monitor) even though I have the correct resolution. Suggestions?

The display on my monitor is too large (can't fit the whole screen on my monitor) even though the resolution is correct. Suggestions?

Sounds like it may just be enlarged. Have you tried holding down the <ctrl> key and moving the mouse up and down, or scrolling your finger up and down if you have a magic pad.

How to display the GUI that we developed, at middle of monitor screen

I want to display my GUI at middle of monitor screen
display = new JTextArea(5,20);
          JScrollPane scroller = new JScrollPane(display);
          getContentPane().add(scroller, BorderLayout.SOUTH);
          getContentPane().add(gui);
          pack();
          setSize(300,250);
          show();

JFrame.setLocationRelativeTo()
It centers the window if the argument passed to it is null.

Monitor screen totally blank. Menu doesn't display. What do I do?

HP w2338h Monitor-- Screen totally blank. Menu doesn't display. What do I do?

Hi,
Try the steps listed in the below link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01295035&tmp_task=solveCategory&cc=us&dlc=en&lc...
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Questions on Alert monitor

Hi,
I have few questions on alert monitor.
1. If we create an alert and have it as default macro, does it display in interactive planning book without a alert profile assignment? or should we assign an alert profile to see alerts in planning book. I remember that we just need alert profile if we need to check the alerts in a separate screen for our convenience.
2. Is alert profile assignment specific to a user? If that's so, then how we assign different profiles to different users? any transaction? or are they specific to a selection or planning book or version?
3. In Application specific alert profile, in SDP tab, under "SDP - Database Macro Alerts", I see few alerts types apart from standard ones. These were actually our previous alert macros. How did they get created like a alert type?
4. I created a simple macro with change color of cell to red if a condition is satisfied. Also raise an alert for that and assigned it to default. When I go back to the SDP94 screen and run the macro, my cells are highlighted as red whenever the condition is satisfied but when I click on the alerts icons, I get a blue information message "No alerts exist for your selection". When I click on the icon, it gives me a window saying " Internal error analyzing SDP alert".
Can somebody help me understand what's going wrong?
Thanks.

I think you can select that standard type.
However since it was SAP delivered, we chose not to, and instead created more line items in SPRO with text such as "Alert Message 1" etc. We created numbers ranging from 9001 to 9010. While defining the custom alert, under alert type, it showed up these numbers that were setup in SPRO. I would assume that just like you pick up 9001, you should be able to pick up 4100 or 4101 (alert type numbers) which is the standard status alert. If you run out of the numbers, you would definitely need to add more in SPRO settings. Remember the alert text is picked from SPRO, where you can change and make it more meaningful so that users can do sorting on those alerts.

Multiple copies of display on Tecra A7 (Intel 945GM)

I am having problems with my Tecra A7 display, using a Mobile Intel 945GM chip. At one point I started getting multiple copies of my desktop on my screen -- two down, two across, with the very top of the fifth and sixth copy coming in on the bottom.
Initially this was just for the Toshiba and ??Resuming Windows?? screen, but eventually it stayed this way all the time. Windows works normally, just with four really small copies of the desktop. An attached external monitor works fine. I tried checking the Full screen (no borders) box in the Intel graphics manager, as well as all the hotkeys I saw listed there -- nothing helped.

Sounds like the display of your notebook has some connection problems or don't know, maybe there is something wrong in general with the display.
Because, as you already tested an external monitor with your machine, I doubt a driver update or reinstallation would help here.
Nevertheless you could try it, but to get to know what the exact problem is, go to an ASP and let them check your notebook.

ALERT MONITOR

Hello
I have configured the Alert Monitor, Alert is triggered, the message comes on the external mail.
But I have 2 questions related to the Alert Monitor.
1) Explain what the appointment of the following fields in the t-code ALRTCATDEF:
alrtcatdef -> Properties -> Max. No. of Dels
alrtcatdef -> Properties -> Expiry Time in Min.
If I understand correctly, these two parameters make it possible to limit the number sent to external e-mail messages to one Alert category for a specified period of time?
If so, I have this option does not work, it is ignored.
That is, point out in t-code ALRTCATDEF: 3 posts in 5 minutes. 10 generating error messages. I get 10 messages per mailbox.
(Error is generated by running a report, calling class PROXY, which obviously causes an error).
How to limit the number of outgoing messages to external mail Alert for one category for a specified period of time?
2) When an error occurs in the JDBC adapter (eg: "ORA-01400: cannot insert NULL into (" PI "." MY_TABLE "." FIELD_1 ")") can not get data from the container (t-code ALRTCATDEF):
SXMS_TO_ADAPTER_ERRTXT (Data Type - CHAR70)
SXMS_TO_ADAPTER_ERRLINES (Data Type - ALPF_STRING_TAB)
However, other containers, normally return their contents.
In t-code: alrtcatdef -> Long and Short Text -> Long Text (E-Mail, Fax) wrote the following:
Error in Adapter Engine: &SXMS_TO_ADAPTER_ERRTXT&.
Full text errors in Adapter Engine: &SXMS_TO_ADAPTER_ERRLINES []&.
How can I put in an error message JDBC adapter?
Software Component Version:
SAP_ABA: Release - 710, Level - 0007, Highest Support Package - SAPKA71007, Short Description - Cross-Application Component.
SAP_BASIS: Release - 710, Level - 0007, Highest Support Package - SAPKB71007, Short Description - SAP Basis Component.
ST-PI: Release - 2005_1_710, Level - 0003, Highest Support Package - SAPKITLQJ3, Short Description - SAP Solution Tools Plug-In.
PI_BASIS: Release - 2006_1_710, Level - 0007, Highest Support Package - SAPKIPYN07, Short Description - PI_BASIS 2006_1_710.
SAP_BW: Release - 710, Level - 0007, Highest Support Package - SAPKW71007, Short Description - SAP NetWeaver BI 7.1.

abhishek salvi wrote:>
>
How to limit the number of outgoing messages to external mail Alert for one category for a specified period of time?
> RWB --> Alert Rule Definition --> Suppress Multiple Alerts of this Rule
I know and use, but it has many disadvantages.
>
How can I put in an error message JDBC adapter?
> could not get your question....
>the second alert container that you defined will contain more alert details (number of characters).
The fact that SXMS_TO_ADAPTER_ERRLINES reflects more complete information about the error, I know. But I did not receive any information from SXMS_TO_ADAPTER_ERRTXT, and SXMS_TO_ADAPTER_ERRLINES.
Containers returns NULL, while the RWB in Message Monitoring error is displayed.

Alert Monitoring and Notification Mails

I have a requirement to configure CCMS in XI system in such a way that the alerts trigger mails to the outlook users.
This is required in J2EE engine also.
Please tell the T-Codes and Steps.
Thanks

Hi Asad,
When your CCMS is not configured you can only do individual monitoring.
To configure the same you must decide which system is to be the central system for the SCR.
To know what SCR is and to know more about it please go through this link.
https://help.sap.com/saphelp_nw04s/helpdata/en/1e/ec9e38f0d92936e10000009b38f8cf/content.htm
After doing the same please follow these steps.
Log on to the system that is to contain the central repository.
- Choose CCMS ® Configuration ® Alert Monitor, or call transaction RZ21.
- Choose Technical Infrastructure ® System Repository ® Set Repository Role.
- The system displays the Set Repository Role in Central System Administration screen. Choose Central Repository.
And also go through the following links. This I guess will help you solve your problem and I guess it answers your question.
https://help.sap.com/saphelp_nw04s/helpdata/en/e5/15a0380d134f6fe10000009b38f8cf/content.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Regards,
Abhy
PS: Award points for helpful answers.

Alert Monitor Problem (Fields are Invisible)

Hello All,
In SCM 4.0 we have written an User Exit to add own customer specific fields. It was working in SCM 4. Now after our upgrade we are not able to view our customer specific fields in the alert monitor. The BADI is still active and when I debugged the BADI everything (addition of field catlog and value population) seems to fine. Please let me know if any need to maintain any additional setting to make our fields visible in the alert monitor.
Thanks,
Siva.

Siva
I think something is still missing in your layout setting. Display the alerts in the alert monitor . After that go to change layout (the layout icon is the second one to the left of delete icon). When you say change layout a popup screen will be displayed with 2 sections "displayed columns" and "column set". Pull the additional fields from the column set to the displayed columns section and save the layout. (SAP will ask for a custom name , and you cannot save a std layout. So u have to give a custom name). When this is done and the alerts are regenerated the additional fields should defenitely get displayed.
In case you dont see the additional fields in the column set itself ,then it means you do not have those characteristics in your system. You have to check RSD1 in that case.
Thanks
Saradha

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

No display on 2nd monitor with a mini displayport to dvi

Hi there,
I have now owned my Macbook Pro for 2 weeks and received my mini displayport in the post today. Once everything was plugged into my LG monitor, there is a signal present as it shows up in the system preferences and i can move windows to the other screen, but the monitor screen is black and telling me there is no signal.
This is very frustrating as I hate being restricted to a small screen.
Hopefully someone will have be able to help.
thanks,

You are right: Thunderbolt supports both Mini DisplayPort cables and adapters without any problem, but Mini DisplayPort does not support Thunderbolt cables.
If you have got an Apple display with Mini DisplayPort, you can use it with the new Mac Pro. Just use the Mini DisplayPort cable or adapter you need. See > http://support.apple.com/kb/HT5219?viewlocale=en_US&locale=en_US#22

Multiple 0's displaying in Alert Monitor Screen SNC 5.1

Similar Messages

Maybe you are looking for