Multiple account contacts - Outlook and Exchange

Hi,
Does anyone know if it is possible to have contacts of multiple accounts, specifically - work account Exchange contacts via activesync and home Outlook contacts via iTunes, sync to iPad while maintaining them separately? i.e. the contacts does not actually sync between the accounts.
I tired doing this and when I enable the Exchange contacts, I was asked if I want to keep the current contacts that is in my iPad and when I say yes, it warn me able the possibility that the contacts might become duplicated.
Thanks for any info.

I would say no since you have windows and the users guide says:
Contacts
You can sync contacts with applications such as Mac OS X Address Book, Yahoo!
Address Book, and Google Contacts on a Mac, or with Yahoo! Address Book, Google
Contacts, Windows Address Book (Microsoft Outlook Express), Windows Vista
Contacts, or Microsoft Outlook 2003, 2007, or 2010 on a PC. (On a Mac, you can sync
contacts with multiple applications. On a PC, you can sync contacts with only one
application at a time.)

Similar Messages

HT1694 I enter my hotmail account into outlook and I get the 'unable to verify account information'...why?

I enter my hotmail account into outlook and I get the 'unable to verify account information'...why?
My email and password are correct. I can log in and check mail on the site but for some reason not in the app.
Any help is appreciated.

I too had this problem.
I found the answer on another forum question: https://discussions.apple.com/message/25497825#25497825
If you have enabled Two-Step Verification, then you shoud go to following link:
https://account.live.com/Proofs/AppPassword
You will get password for any applications you want to add, just insert that password in place of your regular password and you are good to go.

How to sync up apple contact book and exchange contacts

I have a bunch of contacts in my Apple Contact book but am using Outlook for Mac 2011 for email, contact management, and calendar. I have read that you have to sync your Apple contact book to your exchange account rather than directly to the Outlook for Mac 2011 programs so you don't create duplicates (contacts coming from the Apple address book AND the Exchange server). However, I can't find anything that tells me how to sync the Apple Contacts with my Exchange account. I figure at that point once synced, my exchange account will push the new contacts from the Apple Contact book back into Outlook for Mac 2011 making everything whole.
Any help with this would be greatly appreciated.
Thank you in advance.

itsamacthing,
Thanks for the quick response. I do have the exchange service added and am only bringing the contacts down from the exchange side into the Contacts portion (not syncing mail, calendar, etc). It has seemed to create two different "sections' in the Apple Contacts Address book (Please see screenshot). I was hoping to somehow merge/sync these two so I am always working out of one directory. When I create a contact in my Outlook for Mac 2011 it dumps it in the "Exchange" section and up to my Exchange server. However, when I create one on my iphone and sync the phone with this system via usb cable, it puts all new contacts created in the "On My Mac" section thus not moving it to my Exchange or Outlook for Mac 2011 causing new contacts to only sync with different sections based on where they were created.
(As a side note, I have to sync via the firewire cable due to having over 10,000 contacts. There was an issue with the previous release of IOS that caused massive problems with syncing over the air with that many contacts. I've never fully recovered and have not had the hard to do over the air syncing again, hence the tethered sync).
If there is anything I can do to get this rolled into one Address book that syncs from phone all the way through to Exchange server, I would appreciate any additional direction. I've also included a second screen shot to show the difference between the Exchange contacts total (10,660) and the All on my Mac contacts total (10,774). Ideally they would both say 10,774.
Thank you again.

Do connections between Outlook and Exchange Server continue to sync without proper DNS?

Hi there,
We were acquired by an other company that uses Office365.com, so we are moving accounts over from Intermedia, our existing provider, to your service. My question is this: If i point our MX records over to Office365, will we be able to work with the old calendar
and email items using the existing connection between Outlook and Intermedia Exchange? I understand that no new external mail will be delivered to the Intermedia accounts, but will we still have access to the existing items in the old mailbox as long as we
have the Intermedia accounts?
My plan is to receive new mail at Office365.com while taking our time to copy over old emails from the Intermedia folder to Office 365 folders.
Thanks,
Jeff

Hi,
According to your description, your accounts are moved from on-premise Exchange server to Exchange online server and you have the doubt about the availability of calendar and emails through the on-premise Exchange server.
However, since it’s related to Exchange online, to get more professional and quicker help, I recommend you post it on our Exchange online forum, as Ed said.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Skype Account contact list and skype name changed

Hi!
I have been actively using my skype account again lately and one time last week when I signed in, I just cannot. My username and password are correct. And so what I did was to reset my password. I was able to reset my password through my email and when I signed in to Skype, I found out that my skype account was "hacked", I think. My skype name, profile photo and contact list changed into somebody else's account.
I just want to ask what has happened to my account? Why did that happened? The username and contact list that appears to my account, I think, was leggit and not an act of hacking. Could it be possibly that our accounts switched?

Hi, DaisyrieDumali, and welcome to the Community,
Your report reads to me like your account was compromised (hacked). If you still have control of it, sign on to the account dashboard and change your account's registered e-mail address to something else, and then change the password.
Also, as a proactive measure, ensure your computer's software and patches are updated, and run your preferred anti-virus/malware/spyware program using the most recent virus signature files available.
If you have lost access to your account, you may need to create a new account to use so you can contact Skype Customer Service in order to recover the first account. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
Skype is aware of lingering problems with the website when contacting their customer service agents. If you experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also block reaching an agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Understanding Advanced Find in Outlook and Exchange Online Mode

Hi,
we do see a behaviour in Advanced Find where I'm not sure if it is a bug or "by Design". This only happens when online mode of Outlook is used. Please do not advise to use Cached Moded as we are talking about a Remotedesktop-Services environment
and it is not possible to use Cached Mode here.
When we use "Advanced Find" in Outlook to find sent Messages by the name of the sender we are not able to just enter for example the last name of the sender and get results. As soon was we use the button "Sent to" and choose an account
from the GAL or own contacts we will see results. The issue is: Not all messages sent people are in the GAL or personal contacts. So the search is useless at all.
Search with just the last name - no results:
Search with User selected from the GAL (or local contacts) we will get results:
Is this a bug or "by Design"
Peter Forster | MVP Virtual Machine 2002-2011 | Austria |

Hi Peter,
What's the version of Exchange server you are using?
It seems that the searching hasn't finished from the first screenshot you attached. The
Stop button is still clickable.
According to my testing in my Outlook 2013 environment, it took a long time to finish the searching when using Online Exchange mode, however, it should work when searching with just the last name. This is a known issue that
Outlook Online
mode is having a considerable amount of delay when performing an
advanced search, and we haven't found a solid solution for this. Please wait until the searching finishing (the
Stop button become grayed out, just like it in the second screenshot), and then check if it returns any results.
Please let me know the result.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Crossover, Outlook and Exchange 2007

Hi
So our company has just upgraded our server to Exchange 2007(it was 2003) and I'm having real problems getting my Arch setup to play nice.
I was using Evolution to connect to it and this did everything that I wanted it too.
The evolution-exchange plugin, however, only seems to work with Exchange 2003. I tried the evolution openchange option, but this doesn't allow me to access public folders(essential), send completely grabled emails, and crashes all the time.
So I have now decided that running Outlook in wine is the best option. After trying for a while I discovered that outlook doesn't run at all in normal Wine, so I'm trying out Crossover(v9).
Everything installs fine, but when i go to add the exchange server account, it pops up a dialog asking for my username and password. Once i enter them and hit return, the dialog just reappears over and over and never actually lets me in.
I have tried doing the exact same process in crossover in a Ubuntu VM, and it all works fine, but if i package it up and bring it back to arch, the same problem pops up, and there's still no way to get out.
This really is a killer problem for me as the only way I can access my mail and public folders is through a VM on my machine, but the poor Atom N280 is struggling running that with anything else.
Anyone have any idea how I can fix this, or have some sort of alternative way to get the same thing?

Didn't test it, but
http://sourceforge.net/tracker/index.php?func=detail&aid=2901798&group_id=184600&atid=909907 wrote:public calendars are supported, use /public instead of /users in calendar
URL.
However, public folders in general could be a problem:
http://sourceforge.net/tracker/index.php?func=detail&aid=2968429&group_id=184600&atid=909905 wrote:
Public folder support is partially implemented but still highly
experimental.
In thunderbird, you can try to set /public in IMAP account advanced server
options as public folder path, this may or may not work.

Can not Establish Connection between outlook and exchange 2013

hi guys
i recently install my exchange 2013 sp1. I configured DAG and its working great.
but the main problem is outlook. I deploy all of the dns records in my public dns but now i cannot establish any connection between exchange 2013 and outlook 2013.
I mean when i want to create a new email account for my users i face with this error :
" the name cannot be resoved. the connection to microsoft exchange is unavailable . outlook must be online to connected to complete this action "
and finally when i study an article it refers to enable mapi over https in exchange 2013, I enabled it by powershell cmdlet but when i want to test it it gives me error :D
help me plz :D

Hi,
We need to configure Exchange Server 2013 for mail flow and client access with the following steps.
Create a Send Connecter
Add Additional accepted domains.
Configure the default email address policy.
Configure External URL.
Step5: Configure Internal URL.
Configure an SSL certificate.
For more details, please refer to this document.
http://technet.microsoft.com/en-us/library/jj218640(v=exchg.150).aspx
If there is any further question, please let us know.
Best Regards.

Solution for sending/receiving multiple accounts via Mail and web Gmail

I don't know why I haven't seen this before, especially since I've posted about this with no solutions, but I just discovered I can now do the following:
I have multiple email accounts from multiple domain names, and can send and receive from all accounts through Apple Mail as well as only one Gmail web client.
At the gmail.com web client, I go to Settings: Accounts and Import and click on Send mail from another address. I fill in the obvious info for each email account I want to add, choose 'Send through Gmail', and follow instructions to verify.
At the Apple Mail client, after configuring my Gmail account (instructions on how to do this are all over the web), I go to Preferences: choose the Gmail account: Account Information: Email Address and add in all the email addresses I want to use separated by commas (ie [email protected], [email protected], [email protected])
Now when I send to or from any of these emails, it sends and receives with the correct From: and To: emails, as well as replies to the correct emails.
As for the iPhone, I just add accounts for each of the emails I want to send from and put in wrong info for the incoming mail (ignoring the initial 'can't connect' pop-ups). I receive all mail just fine and can send.
Again, this didn't work a few months ago, but it does now. Maybe I'm missing something without realizing it yet.

godaddy accounts sometimes like port 80 vs 587 as well. just to piggy back on your thread.

Navigate Between Multiple Account Log-in and Log-out

I have an iMac running 10.5.8. I have it set up with five user accounts. Each user has to log-in and log-out to navigate between uses. Is there a way to navigate between multiple users without the constant logging in and logging out by the users?

Top right hand corner of the menu bar, right beside the Spotlight icon, is the Fast User Switching menu.

To get GAL of non default address book from multiple accounts in outlook

I have two domain accounts configured in my outlook, for example [email protected] and [email protected]
There are 2 address books (Please refer to the picture attached). I want to show user to SelectNameDialog by adding the recipients from non-default account's address book. But it adds the names to the selectnamedialog from the default address book and displays.
C# code : Outlook.SelectNamesDialog snd = app.Session.GetSelectNamesDialog();
How to get non-default account’s address book programmatically.
ThankYou for your suggestion.
Note: I am not able to attach the image

Hello,
> Note: I am not able to attach the image
It seems you need to verify your account. See How
to Verify Your MSDN/TechNet Forums Account So that You Can Post Images and Links.
> How
to get non-default account’s address book programmatically.
void DisplayGlobalAddressListForStore()
Outlook.Folder currentFolder =
Application.ActiveExplorer().CurrentFolder
as Outlook.Folder;
Outlook.Store currentStore = currentFolder.Store;
if (currentStore.ExchangeStoreType !=
Outlook.OlExchangeStoreType.olNotExchange)
Outlook.SelectNamesDialog snd =
Application.Session.GetSelectNamesDialog();
Outlook.AddressList addrList =
GetGlobalAddressList(currentStore);
if (addrList != null)
snd.InitialAddressList = addrList;
snd.Display();
public Outlook.AddressList GetGlobalAddressList(Outlook.Store store)
string PR_EMSMDB_SECTION_UID =
@"http://schemas.microsoft.com/mapi/proptag/0x3D150102";
if (store == null)
throw new ArgumentNullException();
Outlook.PropertyAccessor oPAStore = store.PropertyAccessor;
string storeUID = oPAStore.BinaryToString(
oPAStore.GetProperty(PR_EMSMDB_SECTION_UID));
foreach (Outlook.AddressList addrList
in Application.Session.AddressLists)
Outlook.PropertyAccessor oPAAddrList =
addrList.PropertyAccessor;
string addrListUID = oPAAddrList.BinaryToString(
oPAAddrList.GetProperty(PR_EMSMDB_SECTION_UID));
// Return addrList if match on storeUID
// and type is olExchangeGlobalAddressList.
if (addrListUID == storeUID && addrList.AddressListType ==
Outlook.OlAddressListType.olExchangeGlobalAddressList)
return addrList;
return null;
Setting the InitialAddressList property is the programmatic equivalent to selecting an AddressList from the drop-down list for Address Book in
the Select Names dialog box.
In its default state, InitialAddressList is the AddressList that has the property AddressList.IsInitialAddressList set
to True. IsInitialAddressList corresponds to setting Show this address list first in the Addressing dialog
box, which is available by clicking Tools, and then Options in the Address
Book dialog box.
See How to: Get the Global Address List or a Set of Address Lists for a Store for more information.

One iTunes library for multiple accounts, iPhones, laptops and PCs.

First off, I'll apologize up front for asking a question that has probably been asked a million times. I've searched the intarwebs and these forums but I've seen so many different answers and read so many different threads pertaining to my question that I think I've over-informed myself to the point of confusion.
OK, for the longest time I've had one iTunes library running on one Windows PC in my house. I used that for updating all our iPods. That was fine for the last however-many-years we've had iPods.
We just picked-up a couple iPhones last night.
All I want to do is move the iTunes library to our NAS so that we can both access the library from any laptop or PC in order to update the music on our iPhones using our different accounts.
Is there a definitive way to do this, or do I have to follow one of these sideways, shady and round-about ways to get this done.
Having to run upstairs to the PC seems to be completely needless with all this technology we have!
Any help would be appreciated.

After reading this and several other related threads, I am becoming thoroughly confused about all of this. I have a situation similar to the one that pokerpal described in the post dated January 7 at 8:06 pm, except that the music files on my system are located on an external hard drive. Everything else is pretty much the same though - I am the admin user (and the main iTunes user and maintainer) and my girlfriend is a standard user who has no music in her own iTunes library. She can see and listen to and make playlists from and sync her iPod with the music in this library from her account, and I can do the same thing, independent of her, from my account. And if I make a change to information within a song, she doesn't see it, and vice versa, and I understand that. What I don't understand is why when I add a song or an album to the music files by importing a CD or downloading something from the iTunes Music Store, she has no way of knowing that unless I tell her, and then she can add it to her library by using the "Add to Library" function. Is there no way of automatically updating her library files to add the new song(s)? We have almost 15,000 songs and videos in that library, and I don't even want to think about what might have to happen if the answer to my question is "no." Interestingly enough, if I put an update to a Word document in the same exact location (on the hard drive), we can update that and pass it back and forth all day - why is that such a difficult task for iTunes to accomplish?
Sorry I went on so long, but this has been building up for some time, and none of the solutions I've read about here have really been of any help, so I'm a bit frustrated and, as I said at the beginning, confused.
iMac G5, MacBook Mac OS X (10.4.8)

Java program to interface with Microsoft Outlook and Exchange.

I am in the process of writing a Java GUI application that can connect to Microsoft Exchange servers and get appointments information.
I tried using JIntegra's Java Exchange Bridge but I keep getting a "AutomationException - class not registered" error whenever my code gets to the part where it attempts to login.
Ive configured everything properly and have the appropriate access.
Can anyone help me or give me some ideas of another way to implement this GUI?
Thanks

Ive configured everything properlyQuite likely not.
I know almost nothing about JIntegra -- but when I look at their website, I see a "Support" page and a "Knowledge Base" page. Seems to me there is a much higher density of expertise over there than there is here.
I know in Windows you can't use a DLL unless you've registered it, which does something to your registry. And you have to be an administrator to do that. Perhaps you have to do something like that on your machine.

How to transfer multiple account emails from Mac Thunderbird to Windows Outlook 2013 ?

I have around 5 email accounts that I access at regular intervals. I have managed to keep these accouts from years and maintained each email in dufferent folders. Now I am about to give away my mac book and switch over to windows system. All I want is to
transfer the emails from Mac Thunderbird to Outlook in windows. I have transferred the datsbase files of each account from mac to windows laptop but dont know hoe to import these to Outlook 2013. These is no such option to import the thunderbird files in Outlook
2013.
Is there anything I am doing incorrect???
Please help me Migrate all the Thunderbird data to Outlook 2013.

You can add multiple accounts in Outlook and use them separately. But to transfer your emails from Mac Thunderbird you first need to convert the emails of Thunderbird to .PSt format in order to import into Outlook Windows.
There are multiple options available online as this is a common issue.
Look Here:
Export Thunderbird to Outlook Pst
I hope it helps you

Multiple exchange e-mail accounts in outlook 2013

Hello. I'm trying to set-up two exchange e-mail accounts in outlook 2013 (Exchange server is synchronized with Active Directory).
Once I add second account and restart outlook I get password prompt from each of the accounts. And it keeps prompting all the time and one of the accounts do not work. Could you please assist me on how to set-up those multiple exchange e-mail accounts correctly

Setup the second Exchange account in one profile would always keep prompting usernam/password. This is limitation of Outlook profile.
To work around this, I recommand that you may use the tool as below:
http://www.codetwo.com/freeware/autologon/
Note:
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.

Multiple account contacts - Outlook and Exchange

Similar Messages

Maybe you are looking for