Multiple accounts using just one library ... is this possible?

Ok so my partner and i have our own seperate accounts on the imac - mainly for chat accounts & browser bookmarks etc; but we only use iphoto (and itunes) on my account. i would like her to be able to access the library on her account BUT with full access. The 'share photos' is not an option as i want her to be able to upload photos, add keywords and edit on her log in and for those changes to be there when i use iphoto on my account. i have tried moving the iphoto library to Macintosh HD, and although my account will happily open it, when i try to on her account it says its read only (even when iphoto was not pen on my log in). I do have an external HDD but this is used for backup and i would rather not have the main library stored on there as not only will it be a bit slow but it would mess with my backup system!
Any ideas, suggestions or solutions?!
Many thanks

You can check/change the permissions on the library folder in the Finder-File>GetInfo window. Set Group and Others to Read&Write.

Similar Messages

How can I have multiple accounts and only one library

How can I have multiple accounts and only one library that all the purchased items feed into?

ask your wireless provider.

Is it possible to sync multiple accounts to just one account?

I have 2 accounts and one of them I have all my songs on but i can't seem to buy anymore songs from there because, whenever i try to buy my songs it say answer security questions. I have tried many times to reset them but apple doesn't send me the reset email so i can't buy anything from that account but thats where all my songs are. Then i have my second account it works perfectly and I wonder is it possible to put those to accounts in one good account? Please help.

No, you can't merge accounts nor transfer content from one account to another account - content will remain tied to the account that downloaded it.
If you aren't receiving the reset email to your rescue email account (you've checked the spam folder as well as the inbox on that account ?) then contact Support in your country, they should be able to reset them.
Contacting Apple about account security : Contact Apple for help with Apple ID account security
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset check that you've spelt your rescue email address correctly (and if necessary change it) for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID

How do I use Address Book to print multiple labels using just one address?

Hi. I'm trying to print multiple address labels using the same address on each label, but I'm stuck trying to make this happen in Address Book. Can anyone help?
Thanks!

The work-around that I've found to solve this issue is to create a new group in address book, then duplicate the contact 20 times or so, and drag the duplicates to the group you've created. Then, when you go to print, you will have a sheet of 20 or so duplicate labels. If you want to save it to repeat this task later, you can select "save as PDF" in the print menu, and simply print the PDF file next time. (assuming you use the same size labels next time, of course) Then, don't forget to delete the umteen duplicates from address book, taking care not to delete the original.
Not the perfect solution, but it gets the job done. Maybe somebody wants to make an automator action that will do this?

Sending Email from Multiple Accounts, not just one.

I have 3 email accounts set up on my iPhone, 1 Gmail, 2 two POP accounts.
For example if I get an email from Gmail, I check it in the phone and hit reply it goes out, from Gmail.
If I view an email in another POP account (NONGMAIL) and hit reply, the reply is sent from my GMail address. What gives?
If you reply to a message from another account shouldn't it go from that account? I don't want to be responding to work emails with my Gmail address.
Does the iPhone only support 1 account to send email? I tried changing the default account that did nothing using the mail client. Anyone else have this issue.

I'm having my issue. I have a gmail and an IMAP account set up on my phone.
When I have my default mail set to my gmail account, and I go into either inbox of my iphone's email application and send to a third email address, the emails appear to be coming from my gmail account.
When I change my default mail to be my IMAP account, the email STILL appears to be coming from my gmail account, no matter which account I send from.
The punchline is that, with either account set to default and sending from either account, the copy that I BCC to myself ends up being sent to BOTH email accounts.
Any idea what's going on?

Multiple transform/assigns for one variable - is this possible?

Hi,
What I am trying to do is read in a complex XML file. Transform some data, add some other data from another source and update a table in the database with all data.
So currently I read in the XML file.
Do one big transform to map the majority of data to the input variable of my database adapter.
I then call a stored procedure to get some ID values.
I have then been trying to add these ID's to the input variable of my database adapter. Tried both transform and assign, but these seem to overwrite the big transform which I previously did.
Is it possible to update the same variable in more than one transform without overwriting the values set previously?
Thanks in advance for any help

Hi Marc,
Thanks for your help.
I've tried playing around with the <bpelx:insertAfter> command referring to your Blog.
I have a couple of questions, perhaps you could help me with them.
1. I noticed that once I have added this command into the .bpel file I get an error within the designer view. Is this to be expected or am I doing something wrong?
2. Is it possible to specify the XML tag which is used and also use an XPath query?
The code I have added is as follows:
<assign name="Assign_GlobalsToInsert">
<bpelx:insertAfter>
<from variable="InvokeGlobalsGetGlobalsOutputValue"
part="outputParameters"
query="/ns1:outputParameters/GET_VALUE"/>
<to variable="ReceiveFileReadInputVariable"
part="DATA_FILE"
query="/ns3:DATA_FILE/ns3:DataLine/ns3:FinalLine"/>
</bpelx:insertAfter>
</assign>
When I tested this it did add and element with the correct value as expected, however the XML tags were <GET_VALUE> as specified in my query section of the from command. Is there anyway to use a different value for the tags?
I currently get <GET_VALUE>99</GET_VALUE>
I would like to use <TRANS_ID>99</TRANS_ID>
Thanks very much for your help

Can I use my Time Capsule to set up multiple networks, or just one?

Can I use my Time Capsule to set up multiple networks, or just one? We'd like to offer the internet to clients who are at our studio, but don't want them able to access all our computers, so a second network for them would be useful.

Two big IFs here.
Not all versions of the Time Capsule have Guest Networking capability, so it might be a good idea to verify that first. Can you provide the model number of your Time Capsule. it's on the bottom of the device.....starts with an "A" followed by four numbers.
Next, assuming that the Time Capsule has Guest Network capability, the next requirement would be to verify that your modem is compatible with the Time Capsule for that feature.
Basically, you need a simple modem.....not a modem/router or gateway device that is often furnished by Internet Service Providers. If you are not sure what you have, post back with the make and model number of your "modem" and we'll see if we can find some details ont he device.

Is it better to use just one project or to jump back and forth?

Greetings,
I am using Captivate 4. And I am wondering if it is better to use just one project or to jump back and forth?
I have one main project and rather than make one big project, I wondered about jumping off to small projects and returning to the main one.
I was trying to figure out the suggestion of jumping back to slide 10 and jump off to another project and then back to slide 20.
Do the projects have to be published to see this work?
I am just learning about Captivate so I am unsure of the best practices.
Thanks.

It's not that easy in Captivate projects to jump to a particular slide midway through another project. Captivate is set up by default to just launch each project from the first slide.
There have been workarounds published on this forum that allowed jumping into the middle of another project, but they can require some complex coding in either JavaScript or ActionScript.

Icloud lists 2 email addresses. How can I change it to use just one.

icloud lists 2 email addresses. How can I change it to use just one?

Sign out of iCloud on the iCloud system prefs. Then, sign in with your new.
However, purchases from iTunes and the Mac App store are forever tied to the old AppleID. There is no way to change that short of deleting the old purchases and purchasing new under the new AppleID.
Based on everything that has happened lately with people using social engineering to gain access to other people’s AppleID’s, you need to speak to someone at Apple regarding your account. If you think you knew the answers to your questions and you are not getting emails anymore, someone may have gained access to your old account and has changed all of that info.

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

Why can't I open and answer an instant imessage notification using just one key(such as enter key)? If I shouldn't, what's the use of answering right from notification?

Why can't I open and answer an instant imessage notification using just one key(such as enter key)? If I shouldn't, what's the use of answering right from notification? I can instead, move my mouse to the app, right?

Hi,
The Alert option in Notifications gives the Reply option
9:33 pm Monday; December 8, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Hi.could use just one program .i just want adobe dreamweaver for training .how could i bay it please ?.thankyou very much

hi.could use just one program .i just want adobe dreamweaver for training .how could i bay it please ?.thankyou very much

Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html

I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?

I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?

You are allowed to have two working installations so if you want to have it on two machines you can. If you want it on more than that then you need to manage which ones are working at any given time such that only two are usable.

I have my iTunes library on my home PC, which is linked to my iPad 2 for music etc. I also have an iPhones 4S, which I would also like to pick up the music from my library, is this possible ?

I have my iTunes library on my home PC, which is linked to my iPad 2 for music etc. I also have an iPhones 4S, which I would also like to pick up the music from my library, is this possible ?

Hello chickenrob,
Indeed, this can be done with Home Sharing. The article linked below details how to set it up.
iTunes: Setting up Home Sharing on your computer
http://support.apple.com/kb/HT4620
Cheers,
Allen

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

Not easily, unless you backed up your data.
Did you? If not, let that be a lesson to never install anything without a backup:
https://discussions.apple.com/docs/DOC-1992
https://discussions.apple.com/docs/DOC-1948

Multiple accounts using just one library ... is this possible?

Similar Messages

Maybe you are looking for