Multiple Activity Codes lost after upgrade?
We just upgraded UCCX from 8.5.1 su3 to CUCM to 9.1(1a)
In UCCX 8.5.1 CAD we could select multiple Activity codes by holding down the CTRL key, since our upgrade we are not able to do so.
It seems that we have lost functionality, is there any way to turn this functionality back on?
Thank you
FYI: TAC let me know that Cisco removed the functionality of selecting multiple Close Codes from the new version, Disapointing for us, to have Cisco remove a function that we used....
I have let our Cisco Team know our disproval......
Similar Messages
-
After upgrading to 10.6.8, I almost immediately began experiencing multiple random kernel panic errors. I reinstalled the operating system that came with my notebook from the cd (10.6?) and the problem went away. I upgraded again to 10.6.8 and again began experiencing the same error. I have since gone back and installed the operating syatem from the cd and then upgraded to 10.6.7. I have not had a single kernel panic error since, but I would like to upgrade to 10.6.8 so that I can install Lion when it is avaialable. Any thoughts as to how I can do this without experiencing all of the accompanying kernel panic errors?
Thank you. The log is below:
Anonymous UUID: CC4821C8-35CD-469C-BE4C-98F1DE35B903
Sun Jun 26 21:18:00 2011
Machine-check capabilities (cpu 3) 0x0000000000000c09:
family: 6 model: 37 stepping: 2 microcode: 9
Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000800 invalid
IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
IA32_MC2_STATUS(0x409): 0xb200000000020005 valid
MCA error code: 0x0005
Model specific error code: 0x0002
Other information: 0x00000000
Threshold-based status: No tracking
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0000000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0000000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0000000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0000000000000000 invalid
panic(cpu 3 caller 0x2aaf41): Machine Check at 0x002b1eb9, thread:0x85833d4, trapno:0x12, err:0x0,registers:
CR0: 0x8001003b, CR2: 0x02282868, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x000100de, EBX: 0x00000630, ECX: 0x00000000, EDX: 0x7fffffff
ESP: 0x5c82bd28, EBP: 0x5c82bd28, ESI: 0x00000000, EDI: 0x5501e0a8
EFL: 0x00000002, EIP: 0x002b1eb9
Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
0x550b8fb8 : 0x21b837 (0x5dd7fc 0x550b8fec 0x223ce1 0x0)
0x550b9008 : 0x2aaf41 (0x59dfe4 0x59e0d1 0x2b1eb9 0x85833d4)
0x550b90f8 : 0x2a29f2 (0x1 0x3b40c858 0xfffd9085 0x83077fff)
0x5c82bd28 : 0x2b2124 (0x32 0x0 0x0 0x0)
0x5c82bd48 : 0x11f1db7 (0x5501e0a8 0xffffffff 0x7fffffff 0xffffffff)
0x5c82be28 : 0x11f3850 (0xffffffff 0x7fffffff 0x0 0x0)
0x5c82bf28 : 0x2ad0c5 (0xffffffff 0x7fffffff 0x10 0x202)
0x5c82bf48 : 0x225bba (0x0 0x4ffad2b2 0xd5 0x5502d488)
0x5c82bfa8 : 0x22810b (0x85833d4 0x2280f4 0x0 0x8c57764)
0x5c82bfc8 : 0x2a179c (0x0 0xffffffff 0x10 0xa1f1064)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(142.6.0)@0x11f0000->0x1213fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 916750825314
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0x142d000, size 0x65536) - last unloaded 138176310496
loaded kexts:
com.Symantec.kext.SAVAPComm 11.0.6 - last loaded 30941770731
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.filesystems.ntfs 3.4
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMikeyDriver 2.0.5f13
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleHDA 2.0.5f13
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleIntelHDGraphics 6.3.6
com.apple.driver.AppleIntelHDGraphicsFB 6.3.6
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.GeForce 6.3.6
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleLPC 1.5.1
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f13
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f13
com.apple.iokit.IOHDAFamily 2.0.5f13
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.nvidia.nv50hal 6.3.6
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.58f15
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500325ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 -
How can I recover all my MAIL emails lost after upgrading to TIGER?
Hello,
I just bought Mac OSX Tiger today and after upgrading from the previous Mac OSX and after launching Mail, I discovered that all my INBOX emails were LOST!!!
I still have the Draft emails, the Sent emails and Trash but no trace of my 1,425 ancient and precious INBOX emails!
Please help me recover them. I tried lots of ways to get them back but cannot find them. I'd like to also understand what happened.
Thank you!
iBookG4HI Greta, Did you Clean Install Tiger, or Upgrade from a previous OS? as if the latter, you might find them in the ARchived files.
I upgraded to Tiger in December and it caused problems with mail but I didnt lose the messages. So I am thinking you did a clean install.
Post back with more info please
Imac FP 800Mhz 80gb 256 RAM Mac OS X (10.4.3) 512 extra Ram iLife 04 LaCie 160gb Ext Airport Express 6.1.1
Imac FP 800Mhz 80gb 256 RAM Mac OS X (10.4.3) 512 extra Ram iLife 04 LaCie 160gb Ext Airport Express 6.1.1 -
GMAIL Lost after upgrade to IOS 8.3
I have lost access to my GMAIL accounts after upgrading to IOS 8.3 !
IOS Settings does not provide me a way to enter a new application password for the account - there is NO PASSWORD box displayed anywhere in the GMAIL configuration. So I tried deleting the account and re-adding it but i get stuck in an endless loop of two-step confirmation and it "appears" to add the account (prompts me for which features - mail, notes, calendar, etc.) but then when all is said and done NO GMAIL ACCOUNT shows up in my list of accounts. WTH?
And trying to navigate Apple's support screens has become an exercise in frustration and futility!
Anyone got any ideas how to fix this mess?Just wanted to add to this thread. I found out that this might be related to using the iCloud Keychain on iOS and with a computer using Mac OS X. Due to how iCloud Keychain stores all passwords across all synced devices, which can be both iOS devices and Mac OS X computers, the methods for accessing and updating those passwords has changed. Not sure whether this is intentional by Apple or not, but it seems that the ability to update passwords stored in iCloud Keychain is not something you can do through iOS (or at least, I have not been able to find a way to access the keychain and view/update any of the passwords stored there).
If you have a computer set up to use iCloud Keychain, you can use the Keychain.app to view/modify any passwords that are stored there, which "should" update the passwords stored on the iOS device, if that keychain item is actually synced to the iCloud Keychain. (Tested this and confirmed)
The problem appears to arise specifically if you only have one iOS device (or only have iOS devices) using iCloud Keychain. The option to update passwords seems to be missing. Not sure it this is new to 8.3, but this is the first time I have run into this problem, and cannot seem to find any reports detailing this problem anywhere else. In fact, to a greater degree, most articles/sites that discuss the iCloud Keychain only refer to the usernames and passwords stored by Safari, which are not the only passwords and information stored by the iCloud Keychain. This issue being a prime example.
I did notice that when re-adding my gmail account using my iPhone, the login page was actually just a webkit presentation of the gmail login page (webkit being the underpinnings of Safari, used for displaying HTML, but not actually the full app or Safari), which is where I entered my username and password, which I am assuming is now stored in my iCloud Keychain. I even checked in Settings>Safari>Passwords&Autofill>Saved Passwords, and my gmail username and password are NOT listed there, so iCloud Keychain is storing some items somewhere else, which is not accessible by the end user through the UI. -
System exception code 0xc0000005 after upgrading to LabVIEW 8.2
After upgrading to LabVIEW 8.2 from LabVIEW 8.0 I am continously getting a system reboot on my PXI (8187) when attempting to run my real time loops which worked fine with LabVIEW 8.0. The loops seem to start, and within less than a 30 seconds the system reboots. Upon reboot a message is displayed reboot due to system error. After running and getting this error again the system reboots into safe mode. Looking at the nirtlog file on the PXI, there is system crash log which list the exception code as 0xC0000005 and a listing of loaded dlls.
Does anyone have any idea what may be leading to this?
Thanks,
KevinThe following is a simple example that produces the exception and reboots the PXI. This VI was originally created on a machine with LabVIEW version 8.0 and run on a PXI-8187 w/ RealTime version 8 and it ran without issue. I then took the VI to a machine running LabVIEW 8.2, I opened the VI, which compiled it to version 8.2, and ran it on another PXI-8187 w/ RealTime version 8.2 and I got a system exception and the PXI rebooted. If I run the two loops at the same priority level, it seems to run without issue. Also if I run with the loops at different priority levels and place a check in the Discard Missed Periods and in the Maintain Original Phase of the lower priority loop, it seems to run fine as well. However if I uncheck either the Discard Missed Periods or the Maintain Original Phase (as is set in the attached VI) the exception will occur. Any thoughts on what is going on, am I doing something wrong?
Thanks,
Kevin
Attachments:
TestLoop.vi 155 KB -
Activation Code - Elements 6 Upgrade
I am getting an invalid serial number when I try to login to upgrade my Photoshop Elements 6 to the more recent version. I am on Mac OS 10.10.1. I see from past posts there have been issues previously with activation codes on Mac.
Does anyone else have this problem?Are you talking about a redemption code or a serial number?
-
I lost all data after upgrading my iPhone 3G to iOS4. I was able to recover only the information that syncs with mobileme, everything else was gone, in all apps: bank accounts, passwords, notes, games, settings, etc -everything
I already restored and restarted, even used time machine, nothing seems to work. Any help?I am trying to update to the newest software, and get a warning that i need to save/transfer new purchases to my library. I know the last time i did this update i went with continue, and as the others in the posting have indicated lost information. It didnt matter to me at that time, but now that I have more info to lose, i dont want to do it, so the other option on it is to do as it asks. But, I am having a hard time doing that. I have done what they have asked by going to file and transferring, but, it doesnt seem to be working. As i continue to get the same warning. I am not going to update this till i get the answer to do it properly this time. But, want to know why it doesnt want to transfer the info that it requires, for me to continue on. I think this is why the others in the thread are losing their info.
-
Attached documents lost after upgrade to iCal 4.0.4
Attached documents lost in iCal after upgrade to iCal 4.0.4; I used to scan documents (written invitations etc.) and attach them to the iCal event. Can I restore them or are they lost forever?
I have exactly the same problem. Came to add a scanned letter to an appointment, and found a) there's nowhere to put it and b) my appointments with similar attached files are now file-less. Where are they? Anyone know?
-
Problem activating iphone 4 after upgrading to iOS 5
I have purchased an iphone 4 which is factory unlocked in Malaysia. I upgraded the phone to IOS 5 from the US Store since I live in USA and frequently travel to Asia. After upgrading the phone it worked with both a Malaysian Sim Card and a Thai Sim Card. I then purchased an iphone 4S and am able to use it everywhere as it is also unlocked. When I erased the iphone 4 and reset it, it will not let me activate the phone with either the original sim card or any other sim cards. Why? How do I correct this problem?
Did you check your security software settings? eliminating conflicts from third-party security software.
-
Airport connections lost after upgrade to Snow Leopard
After upgrading to Snow Leopard, I am no longer able to connect to the Internet wirelessly. I have had to resort to connect via wired connection. I have tried to reconfigure the connection. It finds my wireless network, but when I type in my password it says it is not correct. I know it is an issue with Snow Leopard as it worked fine prior to the upgrade and my other devices connect with no problem.
Go into Displays Preferences and, if you haven't already done so previously, put a checkmark in the box for "Show displays in menu bar". Then, click on the resulting icon that shows up in the menu bar to drop the menu and select "Number of Recent Items" and set it to 10. Now drop the menu a second time and see if there are two 1920 x 1080 resolutions. If so, one of them may be the older one previously in use that was working.
-
Room directory overview lost after upgrade to stack 12
Hi,
after upgrading to stack 12 I can't see the created rooms anymore.
Under collaboration > room directoy I see that there are 5 rooms cause there are 5 lines but the room names I can't see anymore.
Consequently I can't access the rooms anymore.
What's going wrong? Can anybody help me?
Thanks
SusanneHi Gilles,
thanks, the note solved a part of the problems.
Now I can see the rooms in the directory and I can create new one. But if I access into an old room I see only empty content and an empty navigation panel.
New created rooms have no problems. Do you have the same
problem?
Also I can't delete the test rooms again. -
IWorks documents lost after upgrading to ios8
How can i get my iWorks documents after upgrading to ios8?
Other than the fact that you cannot connect to WiFi, we have no idea what you have tried, so see if something in ether of these support articles helps.
http://www.techradar.com/us/news/phone-and-communications/mobile-phones/ios-8-wi fi-battery-drain-fix-problems-1266599
iOS: Troubleshooting Wi-Fi networks and connections -
Multiple apple apps crashing after upgrading HD on MBP
So I manually upgraded my hard drive today on my Macbook Pro (Santa Rosa mid 2007) to a Hitachi travelstar 500gb SATA, 7200 rpm drive. I restored the new drive using my last time machine backup.
I am running 10.6.2.
Since then, I notice multiple apps crash when attempting to open them. So far, I've noticed this includes Safari (nightly Webkit works fine), Mail, and Software Update. I cannot open any of these programs. I have no idea why this is happening, any advice and help is greatly appreciated!
Here is the error log from Mail as an example, I can provide the others as well:
Process: Mail [894]
Path: /Applications/Mail.app/Contents/MacOS/Mail
Identifier: com.apple.mail
Version: ??? (???)
Build Info: Mail-10770000~4
Code Type: X86-64 (Native)
Parent Process: launchd [200]
Date/Time: 2009-12-30 00:01:43.391 -0800
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 3927 sec
Crashes Since Last Report: 10
Per-App Crashes Since Last Report: 9
Anonymous UUID: 668A8257-7F5E-40B2-84FE-1C88472C4F93
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __ZNK3JSC6JSCell17getTruncatedInt32ERi
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
in /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 2 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.8
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: Hitachi HTS725050A9A364, 465.76 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Message was edited by: Reid WainessNevermind, found multiple instances of this on the web after Time Machine restores. It seems to be a problem with the restore process. I reinstalled 10.6 and everything is normal again.
-
Boot camp lost after upgrading to Yosemite from mountain lion
I lost my windows7 boot camp after I upgrade to Yosemite from mountain lion. When I press ALT when rebooting there is no more alternative to boot for window anymore. I did read some thread about this but my case is different since when I tried to type 3 steps(diskutil.......etc) as LonerT user answers it did not work. The attached files here are what I faced with. Please help. I have a lot of important files in windows
If you look at the GAP between GPT3 and GPT4 it is start/size of 782929176/37595880 but the NTFS header starts at 782929920 according to your Testdisk output shown here.
MS Data 782929920 976773112 193843193
The difference is 782929920 - 782929176 = 744 bytes. You will need to delete the current GPT4 and recreate a new GPT4. Please stop if you see any error messages and post here.
1. Delete the old entry and create a new entry at GPT#4.
sudo gdisk /dev/disk0
p
d
4
n
4
782929920
976773112
0700
p
w
y
Here is an example of the delete/new...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1452940543 692.6 GiB AF00 Customer
3 1452940544 1454210079 619.9 MiB AB00 Recovery HD
4 1454211072 1954209791 238.4 GiB 0700 Microsoft basic data
2. This is a tedious process and you want to check after the second 'p'rint command that it looks reasonable, before the 'w'rite and 'y'es to confirm.
3. You will need to reboot after the change, because the disk you are booted from is the one being modified. Reboot will rebuild disk0s4 using the start/end you entered.
4. Run the dd command - sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C and check that the first line contains "R.NTFS".
5. Once you have a working GPT#4, a new hybrid MBR needs to be created which will overwrite what you see in your Fdisk output. This is also done using GPT Fdisk (Gdisk). Your numbers will look different than what are in the following example. In most cases, you will use the default except entry 4, which should have a 'y' for bootable flag.
sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk /dev/disk0: 490234752 sectors, 233.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 59BDFEEB-1EB4-4529-94FE-3CBC2C3CD513
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 490234718
Partitions will be aligned on 8-sector boundaries
Total free space is 2604 sectors (1.3 MiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EF
2 409640 401060383 191.0 GiB AF05 Macintosh HD
3 401060384 402329919 619.9 MiB AB00 Re
4 402331648 490233848 41.9 GiB 0700 Microsoft basic data
Command (? for help): r
Recovery/transformation command (? for help): h
WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.
Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 2 3 4
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): AF
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): AB
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): 07
Set the bootable flag? (Y/N): y
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk0.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.
6. a. Test 1 - Can you see your Bootcamp volume in Finder.
b. Test 2 - Can you files in the Bootcamp volume?
c. Test 3 - Can you see Bootcamp in your System Preferences -> Startup Disk.
d. Test 4 - If Test 1-3 are successful, select Bootcamp and click on Restart. You may need Windows startup repair, if you see a hanging underline cursor at the top left corner of your screen. In most cases, it is not required.
Here is an example...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1452940543 692.6 GiB AF00 Customer
3 1452940544 1454210079 619.9 MiB AB00 Recovery HD
4 1454211072 1954209791 238.4 GiB 0700 Microsoft basic data -
LR4: tone curve settings lost after upgrade
I've find an annoying bug in this new version that makes me really crazy.
I've a Nikon D300S and a D7000.
After the importation of the catalog in the new Lightroom 4 all the D7000 .dng files have lost all the tone curve settings (I normally use linear).
The D300S files instead retain the tone curve settings.
It's a very strange behaviour: I've lost more than half of my old photo settings.
It's really frustrating.
Will be resolve soon this problem?
Until that day, for my older works I'll be obliged to continue to use LR3.I've probably found a sort of workaround!
I've made some "organized" tests and here I report my findings.
Using LR3.5, I prepared a "test catalog" using 4 images from 7 different cameras (28 images total): for each of them, I used both the original nef and the dng converted file (56 files in the catalog), all develop process was set to "2010".
The cameras were Nikon D70, D90, D200, D300s, D700, D5000, D7000.
I applied a strong tone curve to each image in a way that the appearance was heavily characterized.
Before exit LR3.5, I SAVED ALL THE METADATA TO THE FILES.
Opening and converting the catalog using LR4, doesn't show any visual change until I zoom in library or open the develop module: both these operation lead to a flat image with the strong tone curve lost.
Curiously, the history retains the original steps but they are ineffective: histogram and tone curve changes according to the visual change but for some camera the "new" tone curve is "medium contrast", for others (D5000, D90) is "linear", for D300s is "custom" (linear with blacks cut at 9.8%, and this explain my initial impression that D300s's curves were untouched, sorry). This last behavior may depend on the fact that I've different default develop settings depending on the camera serial number.
Finally, the update to the 2012 process only minimally changes the visual appearance and surely doesn't restore the lost tone curves.
And here is the UNEXPECTED WORKAROUND: doing a READ METADATA FROM FILES IT RESTORES THE TONE CURVES (and the 2010 process)! Upgrading the process to 2012 minimally changes the visual appearance again but now the strong tone curve is present and evident.
Maybe you are looking for
-
How do I use home sharing with direct TV / Verizon internet. I have turned on Home sharing on apple tv and in iTunes but can't see the library in apple tv. I can see the photo stream but thats it. Any Ideas????
-
Java applet warning keeps coming back for signed applet
I have an applet signed with certificate issued by a public CA cert verisign. This applet prints document to the printer. When it loads everything looks good and checks on the screen and the user is prompted to allow access to the printer. Even, thou
-
Hi, I cannot start my aperture any more it crashes immediatly. I installeed Final cut express and updated it before starting it. I also updated the plugin manager. I need fast help what do I need to do to get working again? Matthias
-
FF_5 how to ignore error
Hi experts, My client asked us to include a file bank statements (FF_5) with a bank account is not set because it does not wish to record entries in this account. Currently the file is rejected in full. Do you know how to integrate a file ignoring th
-
Why don't I have enough permision
I seem to have not enough permission to save on to my desktop and many internal folders including my external harddrive. I have already used Disk Utility and used Repair Disk Permission... I'm a little reluctant to gut everything on my hard drive and