Multiple AD with same unique name

Our requirement is configure 2 AD servers with GRC ( version 10). But the tricky part is around 300 users in both the domians are same. ef.
Domain  \ User name
NBC \ test
PBS \ test
Now I have to integrate these 2 domains in ABAP.  My problem is once I hook NBC AD it will create test and if I hook up PBS it will not create test.  But I need that too.  (may be I want pass say test1 instead of test) Can this be doable?  How?
Kedar

Our requirement is...
Yep, had this requirement as well.
All these various user name collisions and worse is different IDs for the same person can be solved relatively easily by IdM.
But best practice is still to remove the collisions and use unique IDs. Same goes for deleting users (dont do it).
Good luck.
Cheers,
Julius

Similar Messages

  • Multiple Infoobject with same technical name

    Hi All,
    I have a very basic question which confuses me a lot.
    I have installed a BI content info cube 0SD_C03(Sales overview) and it is installed in Info Area -  ERP Analytics -->sales and distribution analyses. I checked the dimensions of it and 0customer( master data attr) is linked as a dimension. I created a copy of 0SD_C03 and the new Infocube name is ZSD_C03_T. It also has the same 0customer master data attr as a dimension(obviously!).
    Now both the infocubes have different technical name(0SD_C03 and ZSD_C03_T) since they will be storing different sets of data(lets say). but the technical name of the master data (0CUSTOMER) is the same for both cubes.
    ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
    If I search the Info provider section for "0CUSTOMER", i get two entries: One within my info area and another within another info area. And also i can keep doing (Right click Info area--> Insert Characteristic as Infoprovider) on every other info area and insert 0CUSTOMER in every other info area.
    ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
    ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there  be diffferent Infoobject with same technical name be present in different info areas?
    Sorry if i am too elaborate, I hope i have made my questions clear.

    Hi,
    ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
    A. same 0CUSTMER you can use the different places it holds same data.
        source is the 0CUST_ATTR -> target is 0CUSTOMER.
    ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
    A. it will contain the same set of data.
        it has the overwrite function.
    ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there  be diffferent Infoobject with same technical name be present in different info areas?
    A. you triggered the 5 times for specif DTP means you will 5 entries for different info areas.
    finally i will say you use the 0CUSTOMER no of places where you required and no need to create the ZCUSTOMER.
    Thanks,
    Phani.

  • Multiple MovieClips with same instance name

    I'm following a tower defence tutorial and part of the code is set up so I can build towers on the "grass" movie clip. I wanted to add more patches of "grass" and gave them all the same instance name so I can be able to place towers on them, but I have the problem that I can only place towers on the first item I placed and has the instance name of "grass". I can't seem to place towers on the other patches of grass.
    I removed the instance name of the first patch of grass and it let me build towers on the second patch, but the second patch only.
    I was following this tutorial: http://www.goofballgames.com/2010/01/31/how-to-build-a-tower-defense-f lash-game-part-2-placing-towers/
    Here is the code for it I believe:
    onClipEvent (load)
        active = 0;
    onClipEvent (enterFrame)
        if (active == 1)
            setProperty("", _x, int((_root._xmouse - 10) / 20) * 20 + 20);
            setProperty("", _y, int((_root._ymouse - 10) / 20) * 20 + 20);
      hitTestOnGrassMovieClip = _root.grass.hitTest(_x, _y, 1);
            if (hitTestOnGrassMovieClip) {
                gotoAndStop(1);
       _root.ranger.gotoAndStop(1);
            else {
                gotoAndStop(2);
       _root.ranger.gotoAndStop(2);
            _root.ranger._x = _x;
            _root.ranger._y = _y;
            _root.ranger._width = _root["tower_" + tower].range * 2;
            _root.ranger._height = _root["tower_" + tower].range * 2;
    on (press)
    hitTestOnGrassMovieClip = _root.grass.hitTest(_x, _y, 1);
    hitTestOnDeSelectMovieClip = _root.deselect.hitTest(_x, _y, 1);
        if (hitTestOnGrassMovieClip || hitTestOnDeSelectMovieClip) {
            if (hitTestOnGrassMovieClip) {
       ++_root.towerCount;
       _root["tower_" + tower].duplicateMovieClip("t" + _root.towerCount, 500 + _root.towerCount);
       a = _root["t" + _root.towerCount];
       a._x = _x;
       a._y = _y;
       a.active = 1;
      active = 0;
      setProperty("", _x, 1000);
      _root.selectedTower = "";
      _root.ranger._x = 1000;
      _root.ranger._width = 10;
      _root.ranger._height = 10; 
    }

    1.  You cannot use the same instance names for different objects and expect more than one to be targeted.  You need to assign unique names, or you can store references to them in an array and use the array to target them.
    2. You are posting AS2 code in the AS3 forum.  You should repost in the AS2 forum.  http://forums.adobe.com/community/flash/flash_actionscript

  • Multiple Accounts With Same Display Name Lync 2013

    Hi All,
    I have a single user in my Lync 2013 environment that sees three different users with the same exact display name. All three users have a different SIP address.
    User1 - Melissa A. - [email protected]
    User2 - Melissa A. - [email protected]
    User3 - Melissa A. - [email protected]
    Upon looking at the contact card, each user has the same display name but correct email address. However there is another email address line that appears underneath the original Send Email address line - on other computer's this appears as "IM".
    The user is running a Windows Server 2012 Standard on a Hyper-V Virtual Machine. I've tried re-installing the Office 2013 suite as well as forcing an Global Address Book update from his local machine. All data is correct in Lync Server and Active Directory.
    Can someone please advise? Could it be a corrupt database?
    Thanks in advance,
    Adrian

    Hi Adrian,
    You could try deleting the following data for the user.
    1.  User profile:
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    2. Registry Key:
    HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
    3. Outlook Contact
    Delete the related Contact Cards in Outlook
    Hope it can be helpful.
    Best regards,
    Eric

  • Update multiple fields with same/diffrent name

    I have the form is displayed  order no, message and sent_date. Mesage and Date sent are editable.  I can change value from both colums in diffrent values then hit submit for update.  My code below is loop thur message and date sent field then update them based on the pk ID.  Unfortunately, it didn't work as the expected.  Can you please help?
    Oder NO
    Message
    Date Sent
    5463
    first message
    12-10-12
    5463
    second message
    10-13-12
    <cfset myIds = ArrayNew(1)>
    <cfform name="update" method="post">
    <cfloop query="qMesg">
       <cfscript>
            ArrayAppend(myIds, "#id#");
            </cfscript>
         <cfinput type="text" value="#mesg#" name="mesg">
         <cfinput type="text" value="#dateformat(sent_date, 'mm-dd-yy')#" name="sent_date" validate="date" />
         <cfinput type="submit" name="submit" value="Update">
    </cfloop>
      <cfset myIdsList = #ArrayToList(myIds, ",")#>
       <cfinput type="hidden" name="ids" value="#myIdsList#">
    </cfform>
    <!---update--->
    <cfif isDefined("form.submit")>
    <cfloop index="idIdx" list="#newsids#" delimiters=",">
    <cfloop list="#form.mesg#" index="x">
    <cfloop list="#form.sent_date#" index="y">
          update [tblMessg]
         set mesg = <cfqueryparam value="#x#" cfsqltype="cf_sql_varchar">,
               sent_date = <cfqueryparam value="#y#" cfsqltype="cf_sql_date">
       where id = <cfqueryparam value="#idIdx#" cfsqltype="cf_sql_integer">
      </cfloop>
    </cfloop>
    </cfloop>
    </cfif>

    I am with Dan on this (identifying the field names with IDs), but prefer cfloop to cfoutput within cfform. Furthermore, I would put the submit button outside the loop.
    <cfloop query="qMesg">
        <cfscript>
        ArrayAppend(myIds, "#id#");
        </cfscript>
        <cfinput type="text" value="#mesg#" name="mesg#id#">
        <cfinput type="text" value="#dateformat(sent_date, 'mm-dd-yy')#" name="sent_date#id#" validate="date" />
    </cfloop>
    <cfinput type="submit" name="submit" value="Update">
    With proper handling, one loop should be sufficient on the action page.
    <cfloop index="idIdx" list="#form.ids#" delimiters=",">
        <cfset current_message = form["mesg" & idIdx]>
        <cfset current_date_sent = form["sent_date" & idIdx]>
        <cfquery>
        UPDATE tblMessg
        SET mesg = <cfqueryparam value="#current_message#" cfsqltype="cf_sql_varchar">,
        sent_date = <cfqueryparam value="#current_date_sent#" cfsqltype="cf_sql_date">
        WHERE id = <cfqueryparam value="#idIdx#" cfsqltype="cf_sql_integer">
        </cfquery>
    </cfloop>

  • Multiple members with same alias

    I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

    Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

  • To create multiple files with same content but with different names

    Hi SapAll.
    here i have got a tricky situation on Idoc to File Scenario.
    in my interface of an Idoc to file ,there  is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
    which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
    so here for now iam using one reciever file communication channel.
    can any body give me the quick answer.
    regards.
    Varma

    What do you mean by different names?
    when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
    You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
    If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
    Do not use a BPM!
    Regards,
    Abhishek.

  • Mounting multiple directories with same name on different severs to a single mount point on another server

    We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
    The files in these directories will be different.
    These same name directories on multiple severs has to be mounted to a single directory on another sever.
    We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
    Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

    You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
    No sure if this works. If this works, then you will have in this case just an additional level in the tree.

  • Using multiple SSIDs with same name but different PSKs

    I have a central WLC 2504 controller that is being used for remote site FlexConnect 1141 APs. They all advertise three different SSIDs. One SSID is a global SSID that is the same at every office. One is a hidden SSID using 802.1x machine auth.
    The one I am trying to get working is the local office guest network. These SSIDs are all the same at each office but should have different PSKs. They are local to the office, therefore would only ever be applied to a specific FlexConnect group.
    I understand why in theory this is generally not a good idea but given these are for remote sites I'd like it to be possible. I always get this message though:
    "WLAN with duplicate SSID and L2 security policy found"
    Is there a way around this? New WLC code that allows it maybe?

    I was able to configure three (more I think possible) WLANs with same SSID name and all are WPA2-AES-PSK on the same WLC and all are enabled at hte same time.
    Note that you can not have any of those broadcasting on same AP group. Each WLAN can be only broadcasted on a separate AP group. For your sites, It will probably need you to define an AP group for each site to broadcast different WLANs on different sites.
    You can do that if all your WLANs have an ID of 17 or higher. (the reason is, WLANs of 1-16 are by default broadcasted on the default AP group. and because those can not be on the same AP group - including the default one - then you can't have them with WLAN IDs 1-16. i.e on same - default - AP group)
    HTH
    Amjad
    rating useful replies is more useful than saying "Thank you"

  • Multiple accounts with same email can't acces original account

    ok, so i created a new skype. I was messing with skype account on my desktop and wound up unlinking and re linking the account basically i made 2 extra accounts and they have my live: random.namehere_1 and live: random.namehere_2 and i cant log into my original one anymore also when i try to do a recovery it says i have 2-3 skype accounts on my email and i cant log into my accounts by typing in the live:random.namehere and the  password it just says ooops something went wrong basicallly saying the pw and account name are wrong when they arent i made sure of it. so how do i eliminate the cloned accounts and log into the main one.  

    Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
    I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
    I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

  • How To Create Table View With Same Column name But Different Table?

    Hi All,
    I have the problem to create a tableview with same column name but in different table.
    The Table that i have:-
    Table - PAC051MPROFORMA
    Column - mrn,visitid
    Table - PAC051TPROFORMA
    Column - mrn,visitid
    Table - PAC052MTRANSBILL
    Column - mrn,visitid
    Then i want to create a table view to view that table. This is my SQL
    CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
    As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
    where
    *(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
    and
    *(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
    That SQL Return this error = ORA-00957: duplicate column name
    Then I modify that SQL to
    CREATE VIEW pacviewproforma (mrn,visitid)
    As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
    where
    *(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
    and
    *(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
    This time this error return = ORA-01730: invalid number of column names specified
    What should i do?
    Thanks...

    Hi,
    SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
      2  As Select
      3  PAC051MPROFORMA.mrn,
      4  PAC051MPROFORMA.visitid,
      5  PAC051TPROFORMA.mrn,
      6  PAC051TPROFORMA.visitid,
      7  PAC052MTRANSBILL.mrn,
      8  PAC052MTRANSBILL.visitid
      9  from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
    10  where
    11  (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
    12  and
    13  (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
    CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
    ERROR at line 1:
    ORA-00957: duplicate column namePlease give different names to each column.
    Something like this..
    SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
    _visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
      2  As Select
      3  PAC051MPROFORMA.mrn,
      4  PAC051MPROFORMA.visitid,
      5  PAC051TPROFORMA.mrn,
      6  PAC051TPROFORMA.visitid,
      7  PAC052MTRANSBILL.mrn,
      8  PAC052MTRANSBILL.visitid
      9  from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
    10  where
    11  (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
    12  and
    13  (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
    View created.
    SQL> DESC  pacviewproforma;
    Name                                      Null?    Type
    MPROFORMA_MRN                                      NUMBER
    MPROFORMA_VISITID                                  NUMBER
    TPROFORMA_MRN                                      NUMBER
    TPROFORMA_VISITID                                  NUMBER
    MTRANSBILL_MRN                                     NUMBER
    MTRANSBILL_VISITID                                 NUMBER
    ORA-01730: invalid number of column names specifiedThe list of column nmae you specified during the CREATE VIEW should match with the SELECT list of the view.
    Twinkle

  • Read multiples files with same extension

    how to read multiples files with same extension in java.
    for ex : i would like to read all .DAT files from C drive using java.
    How is it done

    - You create the filter
    - You get the list of files
    - You open and read each file.
    For the first two above you look at java.io.File and listFiles(FileFilter filter).
    For the third you find whatever input stream is appropriate from java.io.*

  • Multiple accounts with same email

    I have multiple accounts with same email
    The one that has all my contacts is the one attached to FB but for some odd reason I can no longer access this specific account
    When I try to reset my password, it only keeps asking me to change my FB password
    Once I try logging in on Skype, it keeps asking my FB to connect to the other 2 Skype accounts, completely diffente usernames
    I am only interested in the one that originally connected to my FB as it has all my contacts
    As my other 2 accounts are my old Skype accounts and have my old contacts from years ago

    Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
    I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
    I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

  • Two query with same technical name in Quality

    Hi experts,
    I have two queries in Quality with same technical name. I used the program RENAME_DUPLICATE_ELEMENTS to rename the query and its renaming the latest query instead of the old Query. I am in BI 7.0 system and cant find a note that applies to BI 7.0. There are quite a few notes on 3.x system. Has somebody faced the same problem. What did you do. If there is a note for bi 7.0, please let me know so i can resolve with the Basis team.

    We had similar issues - this happens when you create a query locally and then transport the same.
    The queries have an internal GUID which is generated locally and this causes duplicates.
    You can :
    1. Delete queries using the GUIDS ( you can find this in RZCOMPDIR or RSRREPDIR tables ) using RZDELETE to delete queries.
    identify your older version query and then delete the same and you should be good to go...
    also try identifying the same using program
    ANALYZE_RSZ_TABLES

  • How to get two fields with same tech name in LIS Extractors?

    Hi Experts,
    I need "ERDAT" field from two structures (QMSM & QMFE) in 2LIS_18_IOTASK extractor.
    In LBWE first I moved ERDAT from QMSM. When I moved ERDAT from QMFE it gives an error:
    "Field with same technical name is already available in the Extract Structure".
    I don't want to create Append Structure as we need to write User exit.
    Can any one tell me how to get this field added in the extractor from QMSM and QMFE?
    Thanks for your help.
    Regards,
    Sree

    this is not possible as the all those fields are put in one structure. per definition you can't put the same field name twice in a structure, table in the data dictionary...
    hence, you really need to use an append and fill via user exit
    M.

Maybe you are looking for