Multiple addresses for one address usage type?

Hi all,
I was always under the impression that you could have only one address selected for a given time period for an address type.  And when I try to add multiples in my system, I can only do so by ensuring the validity dates do not overlap.
But then I ran across a statement in the SAP Business Partner document that makes me wonder if you can configure it differently such that you can have multiple addresses valid at the same time for a given address usage.
Per the document [http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABP/CABP.pdf]:
"If you have assigned several addresses to an address type, the first address entered is marked as being the standard usage.  If you wish to define a different address as the standard usage for an address type, select the desired address and choose Standard usage."
Can someone confirm or deny that it is possible to have multiple addresses active for the same validity period for an address type?
And if it is possible, what is the configuration setting that allows it as such?
Thanks
CN

CN -
Yes. It is possible to have multiple addresses of the same type for the BP and you will nominate one of them as the standard address for that address type during the actual address creation.
To configure go to
SPRO ->  IMG -> Cross App Components -> SAP BP-> BP -> Basic Settings -> Address Deterrmination -> Address Types
When you set up your address types here there is a column which denotes if it can have multiple addresses or not.
Regards,
Nikhil
Edited by: Nikhil on Jun 16, 2011 8:04 AM

Similar Messages

  • Multiple addresses for one contact in a Group

    I need to add a work address and a home address for ONE contact in my address book to a group. How can I do this without expanding the group and manually adding the other address? I don't want to have to expand the group. Thanks for any assistance.

    Rather than dragging the card in from the Address Book, start typing the person's name. Mail will give you a pop-up menu on choices. Pick one. Then repeat and pick the other. This is less convenient if you want to put someone in a group and send to both addresses in the group... in that case, V.K.'s solution is the best you'll do.

  • Two address for one company code

    Hi SAPians,
    I have a doubt in maintaining company address for Invoice output!
    Is it possible to maintain two Address for one company code?
    Like if XYZ company code and say it has has two customers AB and CD.
    Then if i want to maintain Company address on print layout for invoice Different to each. how can i achieve it.
    If yes, please through light on it.
    Regards,
    Romesh

    Hi ,
    As far i know it is not possible to have two different address for the same company code.As table can hold only single unique data.
    As far as the above answer is concerned, we use International version fo Customers not for Company Codes.
    Hope it helps.
    Thanks and Regards
    Rohit.

  • Multiple component instances for one component usage

    Hi,all
    How can I create multiple component instances for one component usage.
    I'm using the following code for creating  a single component instance for specific component usage:
    if(c_Usage.hasActiveComponent())
          c_Usage.deleteComponent();
    if(wdContext.currentContextElement().getSelectedTab().equalsIgnoreCase("Registered"))
          c_Usage.createComponent("health.gov.registered.Registered";);
    I can't create one more component instance for
    IWDComponentUsage c_Usage
    cause I have to delete the component instance associated with this component usage.
    Any idea how can I do it anyway?
    Regards,
    Michael

    Hi,
    To create another instance of the same component you need to embed the same component under the Used Components more then once. For Example if you have Componet A to which you want to embed Component B then under "Used Components" of Component A add component B twice.

  • HT1051 Trying to change Shipping and Delivery address for one in the US, from Canada, and can't do it. State and zip code appears in red but no change in country name.  Using French (Canada) iPhoto app.

    Trying to change Shipping and Delivery address for one in the US, from Canada, and can't do it. State and zip code appears in red but no change in country name.  Using French (Canada) iPhoto app.

    Larry's right, You can still use your credit card, you just need to change the "billing address" to the recievers address. It gets billed to your CC and delivered to the US

  • Printing multiple forms for one output types.

    Hi,
    I need to print the form 4 times for one specific output type.  My internal table contains only one record, but for that one record also i need to print 4 forms. How can i do this, i tried using control parameters but in vain.
    Any suggestions of how to achieve this,
    Thanks & Regards,
    Ramana.

    Hi,
    I am working with only one smart form. But there are different output types(ZVSL, ZVFX, ZVFE & ZVFI) configured for that form. But for one specific output type (ZVSL), i need to repeat the print for 4 times.
    Thanks & Regards,
    Ramana

  • How do i scan multiple pages for one attachment

    I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Multiple Vendors for one Document Number in BW

    Hello All,
    We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
    All issues are coming for Process Key 1 only.
    *For Example:*
    Document: 9400000007
    Schedule Line:1
    Doc Item: 1
    Vendor:
    0010019229 - Incorrect Vendor
    0010018962 - Correct Vendor
    Committed Quantity: 0
    Doc Type:
    ZNB
    ZNPP
    Process Key: 1
    Not sure how to upload screen shot.
    Please suggest.
    Thanks,
    Vijay

    Hi ,
    Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
    Regards
    Rahul Bindroo

  • Can you have multiple users for one account?

    Can you have multiple users for one account? if so how do you set it up.
    We are using it for our department and it would be great to see who created what form instead of it being all one name.

    Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
    More information on how to share :
    http://forums.adobe.com/docs/DOC-2462
    Information on how to copy a forms to a different account :
    http://forums.adobe.com/docs/DOC-1390
    Hope this helps
    Gen

  • How to open multiple sessions for one user?

    Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
    When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 1
    update my_table set col1 = 0 where row_id = 1
    select col1 from my_table where row_id = 1
    -- shows result is 0and then enter into the second worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
    I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
    Re: Help with Procedure
    Edited by: tem on Apr 18, 2012 6:44 AM

    Thanks Jim,
    Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
    This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
    I don't see an option for "Worksheet".
    UPDATE:
    OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
    select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
    Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
    Edited by: tem on Apr 18, 2012 8:00 AM

  • Multiple Values For one Condition in Choose From List

    I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

    Hi,
    Check this thread
    How to set a Multiple condition in a single CFL
    Hope that helps,
    Vasu Natari.

  • Multiple Labels for One Order

    Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

    Hi Aj
    Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
    I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
    I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
    PLease confirm your thoughts.
    Regards
    Jai

  • Multiple currency for one vendor

    Hi,
    Is there any way to have multiple currency for one Vendor?

    Hi Siva,
    Yes, It is possible to maintain multiple currency for one vendor. How ? The procedure as follows.
    During vendor creation using T-code XK01 and currency enter input data screen select Extra option on the top of the screen click and display  'Add Purchasing Data'  option click opened new screen and give input data plant, tick mark of the option Data retent.at plant level allowed and tick for OK.
    After that, you have enter multiple currency for the same vendor during vendor creation time, then you will create PO using T-code ME21N the currency field you have fill as you required currency by default first currency of vendor created will be display.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Multiple choose for one parameter

    Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
    Select ....
    where ....
    content.style IN (:p_style)
    (content.style is a column in table "content", and "p_style" is a bind variable)
    i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
    Li

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
    Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
    Select ....
    where ....
    content.style IN (:p_style)
    (content.style is a column in table "content", and "p_style" is a bind variable)
    i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
    Li<HR></BLOCKQUOTE>
    you can do that by flowing the stap
    at first you will write a select statement
    select ...
    From ...
    where Style (colomn name) = &style1
    then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
    then you write in after parameter form trigger...
    IF :P_style = 'All' then
    :style1 := null;
    Else :style1 := 'and style (style means your column name) = :P_style;
    end if;
    null

  • Multiple payers for one sold to party

    Hi All,
    Can we have multiple payers for one sold to party?
    Thanks

    Hi
    Yes, you can have multiple PAYER for one Sold-to-party (only in the Customer master).
    This Partner relationship is maintained in two places. They are,
    > Customer master ( sales area data > partner function tab )
    > Sales documents (at Header level and Item level)
    In Customer master data, you can have multiple partners ( e.g, multiple Payers) for one Partner function( e.g, SH,BP,PY).
    But in Sales document, you can have only one Partner for one Partner function.
    So, you can have only in Customer master data multiple pertners. So, first create the different Payers through XD01 ,choosing Account group "Payer".
    Then assign all those PAYERS  in the master data of the Sold-to-party by going in the change mode XD02 and save it.
    When you create the Billing document, system will give a pop-up of those list of Payers and you have to choose one . You can have only one Payer in one Billing document.

Maybe you are looking for