Multiple agentry servers installed in the same  system?

Hello Experts,
          There are two agentry servers installed in the same system,but in different drives(C and D drive).I have given access to one server remotely,in the sense the applications to the server in one drive are published by other developers who are connecting to the server through network. In the other drive server iam publishing the applications developed locally.But after deployment,when i connect to the server to retrieve definitions,iam getting the latest application published.
Is this situation possible,because when we connect to the server we are using ip address of the system where the server is installed,if both the servers are running in different drives,then which server application will be deployed,Is there any possibility to connect to the server instances(in my system two server instances),so that the application that is deployed to individual servers can be retrieved?
Thanks in advance
Regards,
Sravanthi
Message was edited by: Michael Appleby

Hi Sravanthi,
I do not believe that you can run two Agentry Servers on the same hardware without making other changes (like running them on SMP 2.3).  I would suggest that you look into the documentation for SMP 2.3 as your best solution at this time.  Hopefully some more savvy Agentry folks will chime in with a more detailed response.
Regards, Mike
SAP Customer Experience Group - CEG
Message was edited by: Michael Appleby

Similar Messages

  • Can you have multiple RMI Servers listen at the same port?

    Hi,
    I am wondering if is possible to assign many RMI servers to the same port. I have a working RMI system that is assigning a single server to a specified port when the server is created. I need to scale my project to incorporate Activation and the ability to go through a firewall. I have the power to punch holes in the firewall, so I am thinking that I would like to set up a port for all my activated servers to listen on. Is this possible to put them all on one port?

    Yes you are correct. However, I am wanting the actual servers listening on the same port. I have noticed that when I do not assign a port number when binding my RMI servers to the registry, then the rmi system sets them all up listening on the same port. This port is random and changes each time I restart my server system, which rebinds all the servers to the rmiregistry again. I am look for a way to use custom socket factories and then tell the servers the exact port to listen at. I keep getting port already in use issues though when I try to assign more than one server to a particular port. I don't know if this is even possible. Has anyone ever gotten this to work?

  • Pro & Express Installed On The Same System

    One of our videographers recently installed Final Cut Express 4.0 along side our enterprise standard Final Cut Pro 5.1.4 for a current educational video project that initailly used Final Cut Express 4.0 in the field.
    Now, when one of our producers is trying to import the Express project files into either Express or Pro on that system she is receiving an error that basically says that the files are too new to be opened.
    In my mind, the solution to this issue would be to uninstall both Pro and Express and then do a clean install of Pro 6 or 7.
    Thoughts... suggestions?

    This error message is something that has been occurring with FCE 4 occasionally.
    You may get more info on the FCE Forum.
    FWIW I don't think it has anything to do with both apps being installed on the same computer.
    I have them both and have never had a problem with FCE 4 and FCP 5 on one computer and FCE 4 and FCP 6 on another.
    The only people experiencing the trouble have just had FCE 4 installed.
    CORRECTION !
    It has also been happening to FCP 6 users. If you do a search you should find plenty of correspondence.
    Message was edited by: Ian R. Brown

  • AlChemy stops working when Xonar is installed in the same system as X-Fi?

    A while back I tried to use an X-Fi Prelude and Xonar D2 in the same system. For the most part this worked, however AlChemy would no longer allow hardware sound in various games on the X-Fi. The results were the same whether DS3D-GX was turned on or off on the Xonar. Another user on a forum I frequent has been able to replicate the issue with a Creative X-Fi and Xonar Essence STX. Can someone suggest what might be happening and hopefully let me know if there is a work-around?

    Try older (year+) xonar drivers. Xonar and X-Fi worked fine for me back in 2009. Recently I re-inserted Xonar with newest drivers for some testing and discovered same bug. I think this may have something to do with more agressi've/reckless hooking in GX service (HrMsg), even if GX disabled in Xonar's CP. Killing this process with task manager seems to fix Alchemy.

  • Multiple engines on the same system

    hi,
    Can anyone tell me how i can setup multiple j2ee engine instances on the same system. I know that this is possible if the instances are from different releases. I currently want to install multiple 710 AP 7 instances on a system. But it dosent work . I am assuming it is because the servers listen on the same port.
    Does anyone have a solution to this?
    Regards,
    anoop

    Hi,
    Create multiple instances as follows,
    1. Select NetWeaver'04 Java System(J2EE Only)
    2. <DB>->Central System ->Custom Installation
    Use different SystemID while giving input parameters.
    You can have multiple instances on the same
    application server,
    http://help.sap.com/saphelp_erp2005/helpdata/en/c4/3a5e90505211d189550000e829fbbd/frameset.htm
    Srinivasan T
    <b>Helpful answer=>points</b>

  • Multiple instances of ColdFusion Builder on the same system?

    Hi Folks,
    Four of us work remotely in my company.  It is not uncommon for us to all remote desktop into a system reserved for our use and three of us be using CFEclipse at the same time.  We recently installed ColdFusion Builder on this system and found that it would only allow one instance of ColdFusion Builder to run.  When attempting to start a second instance CFBuilder would show the flash screen and then nothing more. 
    Is anyone aware of workarounds or other changes that will enable us to run multiple instances of CFBuilder on the same system?
    Thanks in advance,
    Thomas Woestman

    Will look into this issue.
    But for now as a workaround, whenever you want to launch CF Builder if there is .bolt file please delete the .bolt it from
    C:\Program Files\Adobe\Adobe ColdFusion Builder\ . And you will be able to launch it even while other has kept it open.
    Thanks,
    Krishna

  • Running Production Premium CS5 & CS6 on the same system / any issues ?

    Still not sure which way to go with the CS6 upgrade, non-Creative cloud version.. 
    Run both on the same system or uninstall CS5 first.. 
    Prefer not to slow down the system but CS5 is running perfectly now..  
    Anyone tried both at the same time ?
    How is opening existing CS5 projects with CS6, this is a concern for me & why I might like to have both installed on the same system ?

    Having installed CS5, CS5.5, CS6 and CC is no problem. They are separate installs.
    Moving projects from CS5 --> CS5.5 --> CS6 --> CC is no problem.
    Moving projects from CC --> CS6 is not possible.
    Moving projects from CS6 --> CS5.5 can be problematic.

  • Can CS3 & Premiere Pro 1.5 co-exist in the same system?

    Yes, I know that by 2012 standards both pieces of software are outdated, but... Due to a resinstall of XP on a system that has a Matrox RT100 card (originally PPro 1.5, worked VERY nicely for YEARS!), and since I have CS3 in a newer "software only" version system, I thought it might be a good idea to migrate CS3 to the older machine (as a backup) prior to upgrading to CS6 on the newer machine.
    Thoughts, suggestions, and money (HA!!) are appreciated!
    Gustavo...
    (Premiere user since version 4 - with lots of "war-stories" about using Premiere for broadcast when broadcasters were drinking the Avid-FCP kool-aid!)

    Yes, all versions exist independently, so they can be installed on the same system.
    Mylenium

  • Can multiple 10.1.4.0.1 IDMS servers be installed on the same host?

    As far as I remember 10.1.2.2 was not supporting installation of multiple OID on the same host?
    Can multiple 10.1.4.0.1 IDMS servers be installed on the same host?
    TIA

    Nothing would stop you from installing 11i and R12 on the same server as long as ORACLE_HOMEs, APPL_TOPs, and COMMON_TOPs of each instance are installed in separate directories. The only pitfall would be the performance (unless you have sufficient resources).
    Please don't consider this plan for production instances!
    Thanks,
    Hussein

  • In windows how do we install and activite multiple versions of tuxedo at the same time ?

    Hi All,
    In windows how do we install and activate multiple versions of tuxedo at the same time ?
    Advance wishes

    You can run different versions of Tuxedo on the same server, as long as they are installed in different directories.
    See PeopleTools 8.53 installation manual Task 3-1: Installing Oracle Tuxedo
    You can install Oracle Tuxedo once for each release on a machine, regardless of the number of PeopleSoft
    applications or databases the server supports. For example, if you are a PeopleSoft 9.1 customer and have
    Oracle Tuxedo 6.5 installed, you may install Oracle Tuxedo 6.5 and Oracle Tuxedo 11gR1 on the same
    machine in separate directories. For example:
    On Windows, you may install into C:\oracle\tuxedo11gR1_VS2010 and C:\tux65.
    On UNIX, you may install into /home/oracle/tuxedo11gR1 and /prod/tuxedo/6.5.
    E-TUX: Can Multiple Versions of Tuxedo Coexist on One Physical UNIX or Linux Server? (Doc ID 607828.1)

  • Installing 10g and 11g on the same system?

    I have Windows XP and have installed 10g database. Can I install 11g on the same system and I can switch to use either of database?
    Thanks in advance.

    Hi,
    I'm working in a linux machine and choose to use also two different users. Of course I'm using two different ORACLE_HOME directories.I think that the best approach.Just a question ,are you keeping the "GROUP" same or different?
    Anand

  • ECC and BW in the same system - Gotchas?

    From the documents, and from the information from SAP, it appears that BW 3.5 can be installed into an ERP 2004 / ECC 500 system. Does anyone have any experience with this during the ECC 5 rampup?
    I have a client that is considering this and would like to know of any gotchas before we hit them.
    For instance the documents mention you need to tune the Oracle database with the parameter "star_transformation_enabled=true", which is normally used in a BW system.  What impact, if any, will that have the ECC side of things?

    Hi John,
    Just to respond to your post and clarify some of the areas.
    1. The mySAP ERP 2004 ECC 5.0 and it's internal SAP BW is <b>not</b> an MCOD implementation. The SAP BW is internal with the ECC (same instance, same database schema, and same database. Whereas MCOD is different instances, different schemas, but same database. One important point is that MCOD and mySAP ERP 2004 fully support three tier architecture.
    2. MCOD was <u>not</u> recommended for a mix of OLTP and OLAP applications on all databases until recently (e.g. recommended for SAP R/3 Enterprise and mySAP SRM but not SAP R/3 Enterprise and SAP BW). This has recently  changed where a combination of OLTP and OLAP is now supported: See http://service.sap.com/mcod or see SAP note 712777.
    3. SAP BW Performance: In a mySAP ERP 2004 ECC 5.0 system with the internal SAP BW functionality active, the system must be configured for both the transaction processing and OLAP functions. This configuration must include load balancing if you have high usage. Without load balancing you are unable to target activities to specific servers or separate different user groups. Obviously if you have only one server load balancing is not available. It is strongly recommended to use the three system configurations for SAP ERP applications and SAP BW.
    4. Automatic multiple Instance shutdown:
    For MCOD this is not the case that shutting down one system in your MCOD installation will also shutdown your other MCOD systems; this only happens if you also close the database (remember it is the only part that this shared). The instances can be started and shutdown independently.
    For the internal SAP BW within ECC 5.0 you have "one system" so if you shut it down, you really shut it down.
    5. Impact of applying patches or doing client copies:
    For MCOD systems, the systems are independent and can be patched and administered independently. The only common part is the database. The database maintenance and patching does affect all the connected MCOD systems. For processes like system copies, these are also independent of the other systems. Obviously if you share the same server for the different systems you need to take care with CPU and memory usage of these functions.
    As SAP BW within ECC 5.0 is the same system, you have to patch the system all at once (recommendation is to use SP-Stacks). A SAP_BASIS support package applied to ECC is also applied to SAP BW at the same time. With regard to client copies, client copies are only supported for ERP 'OLTP' clients (not for the SAP BW client).
    6. "The headaches just are not worth it....especially since server prices are low…"
    I would not totally agree with this comment. For mySAP ERP this low price server argument also works for adding more app servers to ERP and doing load balancing. The use of MCOD or the internal SAP BW within ECC will be made on a number of factors by the customer with different weighting being applied to each of the Pros and Cons.
    The new "internal SAP BW within ECC 5.0" gives customer's system architects more options and increases the flexibility of the total solution in general (delivery of a centralized EDW, deliver of operation reporting, deliver of application or organization specific datamarts to name a few). With more options and flexibility, more decision points need to be reviewed and analyzed which can be a good thing.
    I hope this helps,
    Mike.

  • How can I have C++ 4.2 and C++ 5.8 installed on the same box?

    I am involved in porting C++4.2 code to C++ 5.6 and I would like to know if I could have both compilers sitting side by side on the same machine.
    While using one compiler against the other, do I have to set any environment variables to tell the compiler which set of include files it needs to use? Or are these configured during installation? (I have used the compiler for a long time but I have never thought about how the installation works)

    You should not a problem with this as long as you install each version on different uniqe directory. But please make sure the OS platform is supported by both versions. There are an issue with multiple releases on the same system with Solaris 10, but I don't think you use Solaris 10 because C++ 4.2 is not supported on Solaris 10.
    Yes, you need to set environment variables to tell the compiler which set of include files, binaris or libraries it needs to use. It is not configured during installation.
    -Ngoc

  • Migrating Transports via CHaRM to the same system more than once

    Good Day;
    Does anyone know if CHaRM has the capabilities to migrate transports (within a maintenance cycle) to the same system multiple times?
    Let me explain.
    When we move a maintenance cycle (release) through our landscape we move from;
    Development system - Quality system - Volume system. Then to production
    UAT is being done in both the quality system and the volume system.
    Once all testing is complete, we refresh the volume system with a fresh copy of the production system and re-import all the transports. This is to allow our BASIS team to do regression (batch) and load testing.
    Is there a way to use CHaRM to migrate the transports or is this something that needs to be done manually (as it is today).
    Thanks All,
    Regards
    Don Newton

    Just Ceaning up

  • After firefox update it will not stream video, explorer will on the same system, what is the problem?

    Firefox notified me that an update was available to install and after this install was complete I could not stream video from any site. I was instructed to clear my browser cache, I did ti no avail. I updated Adobe Flash and exhausted the extent of my troubling abilities w/o causing any major system unrest. I accessed the same video steam through explorer on the same system, but firefox is a far superior browser and I like to solve this problem to avoid having to find another browser.
    Please advise
    Aaron Schuler

    I have the same problem.  After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work.  I took the phone to Verizon, but they said they can't fix it, go to Apple
    I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now.  I'm also not going to buy any more Apple products.  Their upgrade caused this problem, and they are not standing behind their producet.

Maybe you are looking for