Multiple airport express airtunes problem

Hi,
I have my wireless network setup, using my AirPort Extreme with 802.11n to create the wireless network, then i have a new AirPort Express (with 802.11n) and an old AirPort Express (not 802.11n).
The two additional AirPort Expresses i have setup to connect to the wireless network, they all look fine and return the green light - but my problem is, that i am only able to select the new AirPort Express in my iTunes (as external speekers) - i can not get it to show me the old AirPort Express
It is kindof sad, now my old AirPort Express is useless - the point was that i should be able to have them both as external audio targets for my iTunes...
I hope you guys can help me.
Kind regards,
Rasmus Burkal, Denmark

Hi again Bob,
Just one thing i find "funny" - you know, in the AirPort tool, you can go and change the settings of a AirPort device. If I go to the "new" Express, I can change the "name" of the iTunes speakers (the name that apear in my iTunes drop-down) - but when I try to do that at the "old" Express, when I click update - I gives me a warning - saying something like "not supported by this wireless apple device" (even though the setting is avalible from the AirPort tool)
All the best,
Rasmus

Similar Messages

Airport Express + AirTunes problem

My problem is this: I am getting only one channel of audio (sound from the left speaker only) from the speakers connected to my Airport Express. This missing channel behavior is consistent whether I'm connecting to the AX using AirTunes from my Mac Pro, my wife's iMac, either of our iPhones, my 2nd gen iPod touch, our iPad, or the iBook G4 in the kitchen. The AX behaves normally as to giving us wireless access in the west end of the house.
The problem started when I unplugged the Bose speakers from the AX to clear off the counter when we had family over; before that it worked fine (as in both audio channels, in stereo, were working).
I've tried a different analog audio cable (stereo minijack cable) between the AX and the speakers. Both of the cables I have work with all our other gadgets (2 iPhones, an iPad, and several different iPods) on these particular Bose speakers.
I have also reset the AX to factory default using the reset button, and reconfigured it by hand (not from a saved config file).
I suspect something has failed in the AX; can anybody suggest any other fixes to try?
For the sake of completeness, the AX is version 6.3. Wireless mode is Participate in a WDS network. Radio mode 802.11b/g compatible. WDS mode is WDS Remote. Connection sharing is Off (Bridge Mode). IPv4 is Using DHCP. Of course, Enable AirTunes is checked, I've given the iTunes Speaker name "Kitchen", with no password. We have an Airport Extreme 802.11g base station version 5.7 which functions as the router/DHCP server for our home. I have restarted it, but have not reset it or anything (I have not wanted to do that, with all the ports I have forwarded, etc.)
Thanks,
Andrew

Suggest that you plug a pair of headphones directly into the audio jack on the AirPort Express to "simulate" speakers. Restart things, and give a listen.
Sound in both ears? Your AirPort Express is fine and the problem is in the cabling or elsewhere.
Sound in only one ear? The internal connector on the audio jack inside the Express is not making contact, or there is an audio signal path problem inside the Express.
What are your results?

Connection problems when I use multiple Airport Expresses

I have one Mac that I use to stream music to multiple Airport Express's. Its seems that when I connect to 3 expresses things work fine. If I connect to 4 the sound cuts out on all speakers.
Is 3 the limit or am I doing something wrong?

Yes you can but....
With the apex in the ceiling you may get a signal loss from your main wireless system. To be able to do what you want in a whole home sound system they all need to be on the main wireless system. You also have to plug them in to a wall outlet which may be an issue with your fire regulations with them inside the walls/ceiling. With airplay you have some limitation also. If she has an ios device and likes say pandora she can only do it to one set of speakers/APex. Only itunes from a computer can do multiple/house party sound. I have 2 APex in my house and love them all. If your main wifi is out of range for some of the new APex's you can run 1 cat5/6 (APex is 10/100) and make a new network and bridge the rest to it. As long as your new wire is connected to your main network you will stay on the same network.
So now you get sound and a roaming wifi through out the house. (that's what I did but not in the ceiling.)
Sonus are good but $$$. by then rewire!

AirTunes and multiple Airport Express modules

I was curious if there are plans to support connecting to multiple Airport Express modules? I have two modules in my home and would love to be able to send music to two different places at the same time.
If there is a plan to introduce this option I'd love to know and if I already can I'd love to know how.
Thanks

I would love to know this as well.
I have just purchased an older home and re-wiring the
house is somewhat out of the question.
I purchased two AirPort Express modules's, but then
found out you can only play to one at a time. I
would love to be able to play one play list in the
basement and another in the living room upstairs
without having to run two iTunes.
Or at least play the same playlist to both at the
same time?
I too would like to know this. I have an older home and would like the option of playing the same music throughout the house or in just one location.
Even being able to hear what is playing from the
iTunes player would be decent as well.
Any thoughts?
Stephane
G4 Mac OS X (10.4.3)

Regarding an Apple TV and an existing Airport Express/AirTunes setup

alright, i think i'm going to make the jump now for the new Apple TV. but i do have a few questions, particularly re: my existing Airport Express/AirTunes and wiring since i'm really maxed out in terms of open ports that i have left.
—my HDMI will have to go through a new HDMI smart switch hub into my older plasma that has one HDMI input. no problem, i've researched the smart switch, and realize the Apple TV may go in the low priority input since it seems to throw a continous current. if anyone LOVES their smart switch, throw me a bone here.
--however, i will need to go audio optical out into my receiver based on my current setup. and my receiver's optical inputs are all currently used. however, one is in use by a nearby Airport Express. since that AE has been used for AirTunes for years, i assume i can now safely ditch it's optical out since i will now be running my music through the Apple TV instead, correct? and therefore i will have my receiver's optical input now freed up, and there goes my Apple TV wire instead. just looking for verification here.
--since this AE is right there, will I get any speed advantage to the Apple TV by dropping an Ethernet cable from the AE's output into the Apple TV's Ethernet input, rather than relying on a pure wireless signal? my assumption is no, since they are both receiving the signal from my Airport Extreme on the other side of the house, but i thought it was still a worthwhile question.
--this particular AE has also been acting as a WiFi range extender (it's b,g,n). so i guess i will still just leave it plugged into the wall, but turn off it's AirTunes sharing, correct?
--(side note: if i wind up not needing the AE's optical out, and i don't need it's Ethernet out, i will then be moving it across the room since i'm ridiculously tapped out of electrical outlets by my entertainment center. and that's where the Apple TV power cord will go. just a boring fyi)
--i truly think i had another important question, but i cannot remember it. so i'll repost when it comes to me.
so i think i know my answers, but i always learn in these forums. so any thoughts or feedback is greatly appreciated.
thank you!

kevinopp wrote:
—my HDMI will have to go through a new HDMI smart switch hub into my older plasma that has one HDMI input. no problem, i've researched the smart switch, and realize the Apple TV may go in the low priority input since it seems to throw a continous current. if anyone LOVES their smart switch, throw me a bone here.
Older AppleTV did not play well with some switches, so it'd be sensible to get advice about one that definitely works with the new unit. They may have ironed out HDMI glitches but too early to tell.
--however, i will need to go audio optical out into my receiver based on my current setup. and my receiver's optical inputs are all currently used. however, one is in use by a nearby Airport Express. since that AE has been used for AirTunes for years, i assume i can now safely ditch it's optical out since i will now be running my music through the Apple TV instead, correct? and therefore i will have my receiver's optical input now freed up,
Yes, the AppleTV will replace the Airport for optical audio duties from your iTunes library. Add an iPhone/iPas Remote app and it should work very nicely as it did with the 1st gen.
--since this AE is right there, will I get any speed advantage to the Apple TV by dropping an Ethernet cable from the AE's output into the Apple TV's Ethernet input, rather than relying on a pure wireless signal? my assumption is no, since they are both receiving the signal from my Airport Extreme on the other side of the house, but i thought it was still a worthwhile question.
I doubt it would be of any benefit as AppleTV has wireless n anyway.
--this particular AE has also been acting as a WiFi range extender (it's b,g,n). so i guess i will still just leave it plugged into the wall, but turn off it's AirTunes sharing, correct?
In that case if it's an extender you may need it on for AppleTV to pick up the wireless, though I think I'd try and see if it receives the main signal adequately first.
--i truly think i had another important question, but i cannot remember it. so i'll repost when it comes to me.
I know that feeling.

Multiple Airport Express issues revisted

I've been trying to set up multiple airport expresses. I want to wirelessly connect to two stereos and stream to both at the same time. Any help would be greatly appreciated.
So far I tried the directions below. But after following them, when I was in itunes, it would not acknowledge either AX. When I was making the suggested settings in the Airport tab, as listed below, it asked me for the name of the network. I wasn't sure what to put there though.
I can set up each on its own network, but then itunes can only find one stereo at a time.
Thanks for you help.
For each AirPort Express Base Station (AX):
Perform a "factory default" reset
- (ref: http://docs.info.apple.com/article.html?artnum=108044)
To set up AirTunes on the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)
- Select "Multiple Speakers" from the speaker selection at the bottom of the iTunes window.

You need to have one of the AirPort Express (AX) join the wireless network created by the other one. See KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Airport Exreme - Airport Express droupout with multiple Airport Express sta

I have multiple airport express's, an iMAc, a Airport extreme router, all software/firmware to current release. If I play on the iMac and one set of remote speakers, no problems, once I add two airport express stations with iTunes, I get the dropouts. Any ideas. I have already got rid of wds, changd channels, tc. to no avail.

I have the same set up and had the same issue and a guy at apple support gave me a tip to try and it worked!. First remove all the expresses from the power outlets keeping your airport extreme running. I also recommend using a different channel say 11. and use ap grapher
http://www.chimoosoft.com/products/apgrapher/
to see if your network looks like it's running well after you resetup your everything or before you bother doing this. I found my audio gear was really messing with my airports bandwidth and when I moved it to a new spot ap grapher showed I was getting a nice steady 54mbit/sec.
So again unplug the expresses and keep the extreme up and running.
You must first do a reset on the airport express by pushing in the little white button on the bottom with a paper clip for a few seconds, but you should check out how to reset the airport express via apple's web site because there are 2 types of resets one with it plugged in and one with it not. Not sure which is right reset method so check that yourself.
Once you have reset it you want to set the first express to extend your preexisting airport extreme network using the airport setup utility. If you have two expresses you may only need to do this to the last one in the chain but it can't hurt to reset them all form scratch.
Once the first express is up and running you then unplug the airport extreme from it's power outlet. Then you go to set up the 2nd express after you reset it and here lies the trick. You extend the 2nd express off the first express without the extreme involved. Then you plug in the extreme back into the power and bingo you have tricked the express #2 to extend from the first express and they wind up with new ip numbers like 10.0.1 and 10.0.2. Instead of them competing for signal using the same ip address they now have their own individual ip address, it turns it into an extension chain. If that makes sense I don't know what the tech terms are for this but it did cure my issues of dropouts I thought it was odd that they had the same addresses so it makes sense that they should have their own.
Micro wave ovens cause drop outs and so do some wireless phones but you can always check on your signal using AP grapher. I found that when I walk around with my MacBookPro in my house that the expresses really don;t have much of a range so if they are really far apart that could also be an issue. I'm sure the N versions are much better and I am thinking about upgrading.
Hope this helps cause it sure took a long time to type:)

Regarding a 2nd gen. Apple TV and existing Airport Express/AirTunes setup

alright, i think i'm going to make the jump now for the new Apple TV. but i do have a few questions, particularly re: my existing Airport Express/AirTunes and wiring since i'm really maxed out in terms of open ports that i have left.
—my HDMI will have to go through a new HDMI smart switch hub into my older plasma that has one HDMI input. no problem, i've researched the smart switch, and realize the Apple TV may go in the low priority input since it seems to throw a continous current. if anyone LOVES their smart switch, throw me a bone here.
--however, i will need to go audio optical out into my receiver based on my current setup. and my receiver's optical inputs are all currently used. however, one is in use by a nearby Airport Express. since that AE has been used for AirTunes for years, i assume i can now safely ditch it's optical out since i will now be running my music through the Apple TV instead, correct? and therefore i will have my receiver's optical input now freed up, and there goes my Apple TV wire instead. just looking for verification here.
--since this AE is right there, will I get any speed advantage to the Apple TV by dropping an Ethernet cable from the AE's output into the Apple TV's Ethernet input, rather than relying on a pure wireless signal? my assumption is no, since they are both receiving the signal from my Airport Extreme on the other side of the house, but i thought it was still a worthwhile question.
--this particular AE has also been acting as a WiFi range extender (it's b,g,n). so i guess i will still just leave it plugged into the wall, but turn off it's AirTunes sharing, correct?
--(side note: if i wind up not needing the AE's optical out, and i don't need it's Ethernet out, i will then be moving it across the room since i'm ridiculously tapped out of electrical outlets by my entertainment center. and that's where the Apple TV power cord will go. just a boring fyi)
--i truly think i had another important question, but i cannot remember it. so i'll repost when it comes to me.
so i think i know my answers, but i always learn in these forums. so any thoughts or feedback is greatly appreciated.
thank you!

I received my apple tv yesterday (wednesday the 29th). I bought a new computer on september 2 and also ordered the ATV and i got next day air. I think that why i got mine so quick. the tracking said i wouldnt get it until october first. But besides that the new apple TV is so awesome. i quickly viewed all my pictures and movies from my mac, used my netflix account, you tube, and a few other features. i also got my iphone to work as the remote which is way better than the standard remote. my only problem is i want to pair my wireless keyboard and cant find out how to do it...

Connecting to multiple Airport Express base stations at the same time?

I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single internet connection behind my stereo and it's connected to the Pay TV. My options seem to be getting a new line installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
Is this possible? Are there other alternatives?
Many thanks

Nate, Welcome to the discussion area!
Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

Airport Express/AirTunes Not Working with New Verizon FIOS Connection

I was just set up with the new Verizon FIOS high speed internet, and now my Airport Express/AirTunes will not connect to my remote speakers like it did previously. The option for them is still there on iTunes, however when I select them, I get the horizontal barber pole for a minute, then the speaker selction goes back to computer.
In more detail:
Previously I had a Comcast internet connection which went through a Linksys wireless router. My Mini picked up the internet with this connection. Then I had an Airport Express hooked up to some remote speakers. They worked fine. Now, I have the Verizon wireless router hooked in directly to my Mini through the ethernet cable. I see the wireless network created by the Verizon router. I still see the wireless network created by the Linksys router. However, my iTunes can not connect to my AE/AirTunes speakers.
Note, I did reset the AE and then using Airport Setup Assistant, tried to locate it again, but it came up with nothing (other than my neighbor's new Verizon router).
Any help would be appreciated.
Thanks!

Still no luck. The green light is on for the AE.
Thanks in advance for the help.

Multiple Airport Express streams?

Is it possible to have more than one Airport Express Unit receiving different signals from different iOS devices? E.g. My iMac plays one track, my iPhone plays another and my iPad plays another?
I have a 4 input hub in my house powering 4 sets of ceiling speakers in various rooms and want to know if multiple Airport Express units mean I don't have to go down the Sonos route as all my music is on iTunes.
Thanks in advance

I do this regularly. I have 5 AX units connected to various receivers around the house. I can stream to a subset of speakers from one device and have another device stream to others. I don't see why I couldn't stream five stream to these speakers.
But the big caveat is that most of my AX units are connected via a gigabit ethernet network not a wireless connection (yes I know the AX units are not gigabit, but my network is). If you were trying to do this via wireless you might quickly run out of bandwidth. This is particularly true for IOS devices. For example, I have an ipad that can stream internet radio. If you think about it the ipod in this case has to first get the wireless signal and then send it back out to the AX, immediately doubling the amount of spectrum used compared to streaming from a device that has the music stored on it. That's probably why my internet radio app won't let me select multiple speakers the way I can with itunes or airfoil.

Multiple airport express's

Can i have multiple airport expresses acting as range extenders on the same network?

Yes, if you remember that they all must connect to the "main" base station.
Apple's extend a wireless network feature works like the hub and spokes of a wheel. Your AirPort Extreme would be the "hub" and each AirPort Express would reside at the end of a separate "spoke".
Each AirPort Express only communicates to the hub....not to another Airport Express at the end of another spoke.....so it is important that the AirPort Express devices be located about the same distance from the hub....and....that they are closer to the hub than they are to another AirPort Express.

Multiple Airport Express without Airport Extreme

Is it possible to have multiple Airport Expresses on a network without the router being an Airport Extreme? I have a Buffalo router and can't get more than on Airport Express to be recognized. Is this possible?

The Express must be configured to "join a wireless network" to be able to stream iTunes to your stereo. It sounds like you have one device working OK, is that correct?
If you can't get AirPort Utility to "see" your other Express, temporarily connect an ethernet cable from your computer to the Express and then open AirPort Utility to see if that helps. You will configure it to "join" your wireless network.
When you have it configured, you can disconnect the ethernet cable and move the Express to the location that you want.

Connecting to multiple Airport Express base stations for internet and TV?

I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single ethernet connection behind my stereo and it's connected to the Pay TV. My options seem to be an ethernet splitter (maybe - any ideas?), getting a new ethernet connection installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
Is this possible? Are there other alternatives?
Many thanks

Nate, Welcome to the discussion area!
Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

I am a big fan of both the Airport Extreme and Airport Express. In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters. We have a good quality wired Cat5e ethernet network extended between the buildings and offices now. Is this possible and does it seem like a good practical solution? I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas.

Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

Multiple airport express airtunes problem

Similar Messages

Maybe you are looking for