Multiple airport-units - Airplay issue.

My network consists of one airport extreme and one airport express unit.
I am located quite far from the main unit (extreme), so I'm using the express as an network extender, or a "repeater" as you might call it. The express also doubles as my airplay receiver. So far, so good.
My brother, who is located closer to the extreme automatically gets connected to the express, (since it is even closer). The problem is that whenever I use airplay, his connection to our network gets really unstable and laggy (Since the airplay function occupies at least 150 kbit/s of upload to the express). And he's giving me **** about it.
My question is: is it possible for my brother to bypass the airport express connection, and directly connect to the airport extreme, while still charing the same network?
Hope that wasn't to confusing!
Cheers!

Hi,
Yes its possible.
Solutions is: As per my experience you have to create a Business Role. (EX: If you have 3 Units under your organization) Every Unit u have to create a Business Role and you have to maintain Role Cofig., key After done Role Cofigar you have to assign to Business Role.
Role Cofig., - IMG->CRM->UI Frame work->UI framework Definition ->Define Role Configuration Key
You assign role configuration keys to business roles in the IMG:
Customer relationship management > Business roles > Define business roles
Thanks
Krishna Mohan

Similar Messages

ITunes 11.0.5 Update and Airport Express AirPlay Issue

After updating my iTunes to 11.0.5 I receive the following error whenever I try to connect to either of my two 1st Gen AirPort Express units: "An error occurred while connecting to the AirPlay device [Airport Express 1 or 2]. The network connection timed out."
Everything was working fine before updating two days ago.
Connection is as follows:
1x AirPort Extreme 802.11n (2nd Gen) "BaseStation" - v7.6.4
1x AirPort Express 802.11n (1st Gen) "Basement" - v7.6.4 - Connected to BaseStation via Ethernet - AirPlay Enabled
1x AirPort Express 802.11n (1st Gen) "Living Room" - v7.6.4 - Connected to BaseStation via WiFi - AirPlay Enabled
1x MacMini OSX10.6.8 - iTunes 11.0.5 (5) - Connected to BaseStation via Ethernet
1x MacBook Pro OSX10.7.5 - iTunes 11.0.5 (5) - Connected to BaseStation via WiFi
iTunes on both the MacMini and MacBook Pro can see the AirPort Express units in the speakers drop down, however when trying to send music to one or both of the units I receive the time out error.
I've tried all the usuall fixes like restarting/reseting the AirPort devices, restarting the Macs, etc. But I'm still recieving this error.
Please help. Thank you.

try to go to this link to download http://www.apple.com/itunes/download/
However, many people say they only got 11.0.5 but everytime i click the link it's 11.1
give it a try

TS1398 Airport Express - Airplay issue

While trying to connect to my airport expess from my computer I got an unknown error (-15000) does anyone know how to solve?

Try temporarily connecting a pair of stereo headphones to the audio port on the AirPort Express Base Station (AX). Do you still just get static? If so, then it may be possible that the AX's internal audio circuitry or audio port itself has malfunctioned. If not, then it could be the cable or your audio receiver/speakers that may be the issue.

Multiple business units - authorization issue

Hi folks,
I'm wondering does anyone have experience dealing with an organization comprised of many different business units all using CRM 2007.
We are looking to find information on how best to configure the system to handle this with regards to authorizations. For example if division A needed visibility on certain areas of division B's information is this easy to configure and how would one go about doing it?
Bit of a vague question I know but any help would be gratefully received.
Thanks,
bubbleabu

Hi,
Yes its possible.
Solutions is: As per my experience you have to create a Business Role. (EX: If you have 3 Units under your organization) Every Unit u have to create a Business Role and you have to maintain Role Cofig., key After done Role Cofigar you have to assign to Business Role.
Role Cofig., - IMG->CRM->UI Frame work->UI framework Definition ->Define Role Configuration Key
You assign role configuration keys to business roles in the IMG:
Customer relationship management > Business roles > Define business roles
Thanks
Krishna Mohan

Using Multiple Airport Express units to play Music to Multiple Sound System

Goal
- play music on my iMac and in one other sound system(I'am aware of the one
system limit )
- I have multiple Airport Express units(3) for different sound systems and wish
to select the room using iTunes.
Reality
if I reset all the airport express units in the house(3) I can initially see the units. On going through the setup I'am able to configure each unit to be part of my wireless network and get the airport express to power cycle. However after this process only the last AE unit is visable via itunes. If I use the airport utility it can find no units when scanning. If I power cycle one of the non visible units it becomes visable but I cannot play music to the unit and trashes the connectivity to the one working AE unit.
What am I doing wrong ?

Sorry - I led you astray unnecessary in my last posted message. The reference I provided was for setting up a remote base station. That is not applicable to your situation, so please ignore.
In your case, you want to use the Airport Utility to configure each Airport Express so that it "join" (and not "extends") your existing wireless network.
What I suggest you do is:
1. get each Airport Express into a known default state by doing a factory default reset per these instructions. Hold down the reset button for 10-15 seconds, until you see four green flashes in rapid succession
2. put all Airport Express devices, and the wireless Mac you are using to configure the Airport Expresses, into the same room as the wireless router you are using
3. configure one Airport Express at a time, and as I said above use the Airport Utility to configure each Airport Express to "join" the existing wireless network - ie select your Airport Express device as shown in the Airport Utility, click the "Continue" button (not the Manual setup button), and follow the instructions. The name of the wireless network you are joining is the same as the name of the wireless network your existing wireless router is creating. Make sure you also specify the same security protocol (WEP/WPA) and wireless network password as your Mac requires to connect to your existing wireless network.

Multiple Airport Express issues revisted

I've been trying to set up multiple airport expresses. I want to wirelessly connect to two stereos and stream to both at the same time. Any help would be greatly appreciated.
So far I tried the directions below. But after following them, when I was in itunes, it would not acknowledge either AX. When I was making the suggested settings in the Airport tab, as listed below, it asked me for the name of the network. I wasn't sure what to put there though.
I can set up each on its own network, but then itunes can only find one stereo at a time.
Thanks for you help.
For each AirPort Express Base Station (AX):
Perform a "factory default" reset
- (ref: http://docs.info.apple.com/article.html?artnum=108044)
To set up AirTunes on the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)
- Select "Multiple Speakers" from the speaker selection at the bottom of the iTunes window.

You need to have one of the AirPort Express (AX) join the wireless network created by the other one. See KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Cannot select multiple airports using remote app.

Why can't I select multiple airport express units using the remote app?

Thanks for the reply.. I also tried that way.. I face couple of issues
1) I could not find an option of saving a Draft Message
2) After multiple recipients(I have selected 12 recipients) in "TO" section, if I type a word in "TO" such as "Pre", it shows me all the contacts containing "Pre" but I cannot select the last contact incase there are more than 20 contacts coz I am unable to scroll down till the end.. If I do so.. I cannot select coz screen scrolls up automatically..
Pls try ... If required I will insert video

Connection problems when I use multiple Airport Expresses

I have one Mac that I use to stream music to multiple Airport Express's. Its seems that when I connect to 3 expresses things work fine. If I connect to 4 the sound cuts out on all speakers.
Is 3 the limit or am I doing something wrong?

Yes you can but....
With the apex in the ceiling you may get a signal loss from your main wireless system. To be able to do what you want in a whole home sound system they all need to be on the main wireless system. You also have to plug them in to a wall outlet which may be an issue with your fire regulations with them inside the walls/ceiling. With airplay you have some limitation also. If she has an ios device and likes say pandora she can only do it to one set of speakers/APex. Only itunes from a computer can do multiple/house party sound. I have 2 APex in my house and love them all. If your main wifi is out of range for some of the new APex's you can run 1 cat5/6 (APex is 10/100) and make a new network and bridge the rest to it. As long as your new wire is connected to your main network you will stay on the same network.
So now you get sound and a roaming wifi through out the house. (that's what I did but not in the ceiling.)
Sonus are good but $$$. by then rewire!

Use ar_receipt_api_pub create_cash API across multiple oper units

Hi,
I have a requirement to create AR receipts across multiple operating units and I am using the AR_RECEIPT_API_PUB's create_cash() to do that. The APIs work fine and I can create receipt in oper unit A. But when I changed to a different operating unit B and call the API, it terminated with NO_DATA_FOUND error.
If I run my same code with operating unit B and then oper unit A, it created receipts in oper unit B but returned NO_DATA_FOUND in oper unit A. That way I confirmed there is no set-up issues with both oper units.
I tried following 4 different ways to switch to different operating unit but all resulted in NO_DATA_FOUND:
1) mo_global.init('AR');
2) mo_global.init('AR'); fnd_client_info.set_org_context(&org_id>);
3) mo_global.init('AR'); mo_global.set_policy_context('M', &org_id) ;
4) mo_global.init('AR'); mo_global.set_policy_context('S', &org_id) ; (My EBS set-up has multi oper units, but I tried 'S' flag because of lack of ideas)
Please help. Thanks!
Mike.

@MikeLi,
Did you find any solution for this problem? We are facing this problem on R12 while creating AR receipts across multiple operating units. We will be glad if you share the solution. We have tried all possible ways; but did not help. When we look at the mo_glob_org_access_tmp ; we have access to all organizations; but the api returns 'no data found'
Thanks.

Check Payment Processing Across Multiple Operating Units

Hi There
We are currently implementing Oracle R12 at the company I work for. Our solution implementer has informed us that you cannot process one check (cheque) payment across multiple operating units and that this is an outstanding enhancement with Oracle. Therefore (if we accept) this we will have to process a seperate check per operating unit which will increase our payment processing significantly.
Can anyone out there:
A. Confirm this is indeed an issue
B. Are you aware if Oracle are doing anything about it and
C. Is there any workaround that we could consider to lessen the impact.
Thanks

Hi,
Scenario 1
If you are going to make Single check payment to the same supplier having different sites under various operating units, oracle has provided a workaround, i.e. to make a manual payment in payables module, however it would not generate any payment instruction.
Scenario 2
If you are going to make single check payment to various suppliers in different/same operating units, it is not allowed by Oracle, as there is no logic behind it. You cannot have 1 check generated for different suppliers ...
I am assuming you are referring to Scenario 1, in which case, i would say there is an WORKAROUND suggested by Oracle to make use of MANUAL PAYMENT method, which you could discuss with your Solution Implementer.
Regards,
Ivruksha

Multiple Airport Express streams?

Is it possible to have more than one Airport Express Unit receiving different signals from different iOS devices? E.g. My iMac plays one track, my iPhone plays another and my iPad plays another?
I have a 4 input hub in my house powering 4 sets of ceiling speakers in various rooms and want to know if multiple Airport Express units mean I don't have to go down the Sonos route as all my music is on iTunes.
Thanks in advance

I do this regularly. I have 5 AX units connected to various receivers around the house. I can stream to a subset of speakers from one device and have another device stream to others. I don't see why I couldn't stream five stream to these speakers.
But the big caveat is that most of my AX units are connected via a gigabit ethernet network not a wireless connection (yes I know the AX units are not gigabit, but my network is). If you were trying to do this via wireless you might quickly run out of bandwidth. This is particularly true for IOS devices. For example, I have an ipad that can stream internet radio. If you think about it the ipod in this case has to first get the wireless signal and then send it back out to the AX, immediately doubling the amount of spectrum used compared to streaming from a device that has the music stored on it. That's probably why my internet radio app won't let me select multiple speakers the way I can with itunes or airfoil.

Multiple airport connections

I have an airport express that I use for sending music to my stereo, all works fine. If i want to connect to this I have to disconnect from by home hub that provides my internet, I had read that you can have multiple airport express connections so you can stream to different rooms in the house? Can this also be done with other routers? I have a BT Homehub and an airport express, and they are not beside each other, that was just incase someone suggests plugging in the express unit into the main router.
Thanks
Fudzy

Go to airport utility select the airport express you want to manage and when it prompts you tell it to join an existing network. This works.

Org unit reporting to multiple Org units

Hi,
We have set the A002 relationship as time constraint 002 and the B002 is set up as time constriant 3 but we are still able assign the org unit to report to multiple org units. Can you please let me know how to fix this issue.
Thanks
Vick

Hi,
Change the reporting relationshipp time constraint as 1
Regards,
Nitin

After adding Apple TV, my itunes multiple speaker icon (airplay?) blocks speaker output on my pc. Local speaker output will not highlight. Any ideas?

After installing Apple TV on another TV, my Itunes on my PC will not output to speakers. Apple TV added multiple speaker icon but it will not highlight "local computer". I can check box but volume bar won't open and no sound comes through although speaker mixer shows signal. Any ideas?

This same thing is happening to me on only my 2011 Macbook Pro. My other macs and iOS devices can all stream audio to my airplay devices (airport express and atv2) just fine.
On my Macbook Pro trying to play to 1 external speaker
Click the airplay button in iTunes (airplay logo lights blue)
Select ATV2 or Airport Express
Airplay logo goes back to gray
No audio is played out of airplay
On my Macbook Pro trying to play to multiple external speakers
Click the airplay button in iTunes
Select "Multiple speakers..."
Check the box next to ATV2 or Airport express
Check box "depresses" like I've clicked it, but the box is never checked
No audio is played out of airplay
Like I said, all of these things work perfectly on all of my other apple devices. It's just this one Macbook Pro that it's failing on. It seemed like it just started failing a month or so ago. It's driving me bonkers!

Airport Exreme - Airport Express droupout with multiple Airport Express sta

I have multiple airport express's, an iMAc, a Airport extreme router, all software/firmware to current release. If I play on the iMac and one set of remote speakers, no problems, once I add two airport express stations with iTunes, I get the dropouts. Any ideas. I have already got rid of wds, changd channels, tc. to no avail.

I have the same set up and had the same issue and a guy at apple support gave me a tip to try and it worked!. First remove all the expresses from the power outlets keeping your airport extreme running. I also recommend using a different channel say 11. and use ap grapher
http://www.chimoosoft.com/products/apgrapher/
to see if your network looks like it's running well after you resetup your everything or before you bother doing this. I found my audio gear was really messing with my airports bandwidth and when I moved it to a new spot ap grapher showed I was getting a nice steady 54mbit/sec.
So again unplug the expresses and keep the extreme up and running.
You must first do a reset on the airport express by pushing in the little white button on the bottom with a paper clip for a few seconds, but you should check out how to reset the airport express via apple's web site because there are 2 types of resets one with it plugged in and one with it not. Not sure which is right reset method so check that yourself.
Once you have reset it you want to set the first express to extend your preexisting airport extreme network using the airport setup utility. If you have two expresses you may only need to do this to the last one in the chain but it can't hurt to reset them all form scratch.
Once the first express is up and running you then unplug the airport extreme from it's power outlet. Then you go to set up the 2nd express after you reset it and here lies the trick. You extend the 2nd express off the first express without the extreme involved. Then you plug in the extreme back into the power and bingo you have tricked the express #2 to extend from the first express and they wind up with new ip numbers like 10.0.1 and 10.0.2. Instead of them competing for signal using the same ip address they now have their own individual ip address, it turns it into an extension chain. If that makes sense I don't know what the tech terms are for this but it did cure my issues of dropouts I thought it was odd that they had the same addresses so it makes sense that they should have their own.
Micro wave ovens cause drop outs and so do some wireless phones but you can always check on your signal using AP grapher. I found that when I walk around with my MacBookPro in my house that the expresses really don;t have much of a range so if they are really far apart that could also be an issue. I'm sure the N versions are much better and I am thinking about upgrading.
Hope this helps cause it sure took a long time to type:)

Multiple airport-units - Airplay issue.

Similar Messages

Maybe you are looking for