Multiple alarms 'swapping' so that only one works

I have encountered a strange bug in iCal that I wonder if anyone can help me with. If I create an event with multiple alarms, say, one reminder 60 minutes prior, and a second reminder 5 minutes prior, iCal swaps them around so that the 5 minute reminder is listed first, therefore the 60 minute alarm never goes off! This is really frustrating, and I'd love to hear any ideas people have to fix this.
Cheers
Greg

You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O.

Similar Messages

Why is it when I plug in any headphone that only one works?

Why is it when I plug in any headphones that only one works?

the song is in mono or only one track
one of your headphones is broken
there's something wrong internally in your iPod.
Try different songs to see if all of them only play on one side. also try apps to see if the sound is on one side or both.
Try a different set of headphones/ear buds to see if they sound different
if neither of the above fixes it then you may want to have Apple check out the device and see if the jack is broken

Job with Multiple Schedule of same time & only one is executed, Why

Hi ALL,
I've Created a package to notify report in email as excel, which is using a path to render report and save it as excel.
This package was need to be schedule every first day of month and on every Friday even at morning 7 AM.
So logically these are two events.
But if we see on 1 May 2015 we have Friday and plus first day of month
So technically this should fail.
either for IO operation for render &
storing data over same location with same file name.
To replicate this i created two three schedule
Below is the job history, job is invoked by only one schedule
Question-
1) Why one one schedule execute?
2) why "sched2" only , it could be "sched3" only or "DentalOperationStackAndRank-Sched1" Only?
Another this i result into error if different job executing same package at same schedule.
FYI- package is deployed at database level
HS

Hi HS,
As described in this
article, more than one job can run on the same schedule, and more than one schedule can apply to the same job.
And I make a test about your scenario, when configuring a SQL Server job with three schedules that reference same dates and times, my job behaves as yours that only one schedule is executed, but the job is invoked by schedule2 or schedule 3 in my environment.
It is a normal behavior of SQL Server job in my opinion. For more details about such scenario, you can track the job following this
blog.
However, when I configure three jobs that run on the same schedule, everything works well and the three jobs all run successfully.
I recommend you configure three different jobs that execute same package at same schedule .
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

How to validate that only one check box is checked in detail block

Hi All,
I am using oracle Forms 10G on windows.
I need help on how to validate that only one check box is checked in detail block. I have multiple records in the detail block and I have check boxes for each record in the detail block.
I have a button to select the values from the detail records where the check box is checked. But I want to make sure that only one record is check not more than one.
How do I validate this on a push button trigger?
Thanks

When I've done this kind of thing, I create a Form level variable of TYPE number and then add or subtract to this variable as I check and uncheck the checkboxes. If the value of the variable is 1, then you know that only one checkbox is selected. If the value is greater than 1, then you know the user has selected more than one check box. You could also add code to your When-Checkbox-Changed trigger to test the variable and instruct the user to un-check selected record before selecing a new record.
With respect to the Form level variable, you can use a GLOBAL, PARAMETER or Program Unit package specification. I prefer to use the PU Package Spec as this method has a smaller memory footprint. For example, in the Program Unit node of the object navigator create the following;
/* Form variables package spec */
PACKAGE Form_Vars IS
CheckBox_Cnt     NUMBER := 0;
END;Now in your When-Checkbox-Changed trigger...
BEGIN
   IF ( Form_Vars.CheckBox_Cnt = 0 ) THEN
      Form_Vars.CheckBox_Cnt := Form_Vars.CheckBox_Cnt + 1;
   ELSE
      /* it's assumed the value is greater than 0 */
      Message('Please uncheck selec ted record before choosing a new record.');
      RAISE Form_Trigger_Failure;
   END IF;
END;Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Feb 3, 2011 10:15 AM

Why after updating to ios 7 on iphone 4g do I have 2 facebook icons? Only one works. How do I get rid of the other one?

I recently update to the new ios 7 software on iphone 4. Now I have 2 app icons for facebook. Only one works and opens facebook. How do I get rid of the other? Tried deleting it out the old way but it has no "x" to take it out with?

okay never mind. I powered off and back on and the second not working icon is gone. So if anybody else has this same problem, give it a try

I get two tabs with my identical home page every time I open Firefox. How do I "unpin" one of them so that only one tab is populated when I open Firefox?

When I installed Firefox I inadvertently responded "yes" when asked if I wanted to "pin" my home page to the browser. l also designated that page (my Juno page) as my home page. So now whenever I open Firefox, two tabs appear with my identical home page. How do I fix it so that only one tab appears when I open Firefox?

Its not my home page, Like I said, I hae my home page also come up in a different tab (google) I also get the welcome to FF4 on a seperate tab. My home page is set to google. But I dont want the welcome screen to pop up

Multiple rollover areas on a slide, only one works

Hi all,
Long time reader, first time poster. I have been looking through all the forums and can't find a solution for this issue.
I have a slide with six rollover captions, arranged in two rows of three. Beneath each rollover caption is a regular caption containing a statement; the viewer is intended to mouse over the statement, and the rollover will pop up a caption saying whether the statement is true or false. After ten seconds a button appears and pauses the slide, and the viewer can click the button to go to the next slide.
When I preview the project, only the top left of the boxes works right away as intended. Then after ten seconds, the button appears, and the other five start working just fine. One weird thing is that during that first ten seconds, the mouse cursor still changes to a hand icon on all of the rollovers, so it recognizes that they are there, but nothing pops up.
The issue seems to have to do with the button, but I have tried adjusting its timing, its order in the layer stacks, I have tried deleting the button, I have tried copying all the elements except the button to a new slide, and I'm still getting the same problem, and the buttons start working properly at the ten-second mark regardless of where the button is. All the rollover captions and rollover areas have identical properties as far as I can tell. The rollover areas are at the top of the layer stack, and are not overlapping. The top left (on the stage) is always the only one that works properly, no matter how I arrange them in the layer stack.
I have tried everything I can think of. Now I humbly turn to you. Shot of my timeline below. Thanks in advance!
-JB

Are there any objects on earlier slides that are set to Rest of Project that might be overlapping your hit areas on this slide?
For example, something that caused a similar issue once was having a widget on an earlier slide. The widget in question (Adobe Course Companion) was set to Rest of Project and ended up obscuring the hit area of interactive objects on later slides. Not sure if this helps, but if you were able to paste these Smart Shapes into a different single slide project and they still didn't work there, then my idea probably wouldn't be an issue either. This might be one of those issues that only happens on a MAC.

SQL Command returns multiple records, but I see only one record in report

I work with Crystal Reports XI R2 SP3 and Oracle 10g R2 database.
I have an SQL Command that returns multiple records. Command name is "CommDivisionNames" and it returns column "CommDivisionNames.DIVISION_NAME". When I place this field into report details section of the report, I can see all 10 records returned and this is how it should be. I actually need this field to be placed in the report header section, and when I place the field there, then I see only the first record. I set that field as "can grow = true". When I do "browse field data" for this field, I see that all 10 records are there, but only the first one is displayed in report header section.
I thought that I can place SQL Command field anywhere on the report (page header, footer, details) and that it will always show all records that it returns from the database. Can that be done?
My "main part" of the report returns different set of records, and that's what I have in "report details" section. I need this list of divisions to be in the report header section, so user can see that the report was executed for DivA, DivC, DivE.
Thank you,
Milan

sharonamt:
Users select divisions from parameter, but the parameter multi values are division_numbers (1,5,10), not division_names. Division_names are visible in parameter_prompt_window as description, but parameter remembers only numbers and I don't know how I can reuse division_names later in formula.
I do join for division_numbers and make them into one string variable and pass to sub-report, but I think that I can only get these division_names by calling an SQL command or calling stored procedure.
If I try to do join({MySQLcommand.DIVISION_NAME}) I get error message "A string array is required here".
Carl:
I'm playing with cross-tab and I can use it to see all division_names in the report-header section. Since I need them in only one column or only one row, I have to edit cross-tab object and turn all unneeded border lines to white to make them look invisible. So, cross-tab could be a solution for my problem here.
Another option could be to re-write my SQL command. Since I've read here that SQL command could be written in the same way as I would write a stored procedure, then I could use a bit more complex code to get all multiple division names from the database table into a local cursor, and then use do-while loop to concatenate them into one string, and then to return that string as one record (like 'DivA, DivB, DivC'), and then it should not be a problem to display only that one record/string in report header. It is my understanding that Crystal Reports can call stored procedure that works with many cursors/recordsets and CR will use only the last recordset from the stored procedure. Do you think it could be done this way?
Thank you,
Milan

3 isight cameras on a network. Only one works

I'm at a church and three of us have isight cameras. We can talk to each other, but my computer is the only one that can use isight to connect to people outside of our church building. The other cameras won't do video or audio chats with people outside the building. Any ideas? I checked the firewall settings in system preferences and they're exactly the same. I'm not sure where to start.

Hello Scott,
... two users that are having the problem only use their isight cameras with ichat av. ... when he connects the camera, it freezes ichat. any ideas on that?I have never seen an instance where connecting a camera causes iChat to freeze. That user needs to do the same iSight tests you have done and check out the other the iSight Tips and FAQ.
Suggestions to help new iChat users get started can be found at Using iSight with iChat AV.
All iChat AV 3 users should upgrade to 10.4.2. 10.4.2 upgrades iChat to iChat AV 3.0.1, which significantly reduces iChat problems for many users. If you are still having problems, there are other tips in Help for iChat AV 3 Problems.
<hr> ... switch the router that the main internet line flows through for the church and school.If you have multiple subnets or LANs in your "church and school" you may have induced problems that way. You can easily check whether this is the source of your problems by moving one of the Macs that currently does NOT work to the LAN connection you are using that DOES work. If that fixes your issue with the problem Mac, the problem is in your configuration or connections.

Multiple users shuts down to only one user

I have multiple users on my IMac.
Recently when I go to log on the computer instead of show all users, it shows only one user (not me) and I have to log on to that user and log off to see all users again.
Any ideas how to fix this?

After migrating your whole user account from another computer you will be left with 2 user acounts on the target computer.
The best way to keep just the new user account is to log into the account you want to keep, then go into system preferences > users&groups (Accounts if using snow leopard) then delete the other account.
(Make sure you have a backup of any files you wish to keep on that user account if any)
If you wanted to just merge particular files from one computer to another instead of creating two user accounts you would be better off using the good old drag and drop method instead of migration assistant.

How do I link multiple Spry Accordions so that when one is opened the other ones close?

I have created a web site using six Spy Accordions as the menu. I know this is not what they are usually used for but the animation as they open was just right for the site. I've gotten them working just as perfectly as I could want, with one exception. Because there are six independent accordions they all open and close independently. What I want is a way to link them so that when you open up one it closes the others so only one is open at a time. I've looked and looked for anyone anywhere talking about this and I've found nothing. I'm not even sure if it's possible. I know that Spry is being fazed out and jQuary is basically replacing it. I have considered heading in that direction but I've put so much time into this and it works so perfectly except that one thing. Here's the website for referance: http://journeywilderness.com/
Please... if anyone has any ideas about how to make only one Accordion open at a time please please help me. I'm frustrated beyond words at this.
Thank you.

You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O.

How do I create a dropdown with three options so that only one is visible in a form (non-flowable)

I'm working on a form which needs to provides three options for the user out of a drop down list. When the user chooses one option, only that subform is to be visible. Two of the three subforms are text fields, and the third subform is a series of fields which are editable by the user.
How do i create a dropdown with three options in it, so that in each instance only one subform is visible? This needs to happen in the same space on the main form.

Hi Nellie,
Here is the form back to you. There were three main issues:
In order for dynamic behaviour, like showing and hiding, the form must be saved as a Dynamic XML Form in the save-as dialog.
While you can use a minus sign when naming objects and subforms, it will cause scripts to fail. I have changed the name of the subforms so that they now use an underscore.
The dropdown had specified values in the Object > Binding palette (1, 2, 3), so the script needs to use these in the if statements.
When sharing forms on Acrobat.com, the best option is to select the file in your workspace and then click Publish. This will make it available to anyone who has the published URL.
I hope that helps,
Niall

ALE-IDOC- Multiple IDOCs gets triggered with only one output exists

Dear Gurus,
We need you help to resolve the issue being faced with IDOC in our system.
From Sales order , an EDI output ZF40 gets trigggered which is a order confirmation. This is being sent to a Logical system
(Partner type LS in IDOC) which is F4F (Partner no.)
Now the issue is at sales order level, only one output line with ZF40 is triggered and in processing log one IDOC no. is showing.
We have received complaint from the external party F4F that for a same sales order , multiple IDOCs (around 500 IDOC's each in 3min interval )are being received at their end. We have checked in SAP , all these IDOC's were triggered from SAP only. All IDOC's are in green in SAP. But from where these IDOC's got originated is not known.
We have checked the batch jobs and not seems to be triggered from there.
Is there any other way that IDOC can originate automatically.? Please advise your valuable inputs as it will help to stop triggering of IDOC's (around 11,000 so far) in SAP and in receiving system.
Regards
Anand MOhanasundaram.

In t.code V/30, go to the output details. Here uncheck the box for multiple issuing and check again.
Regards,

Multiple events per date with only one photo each - Unwanted

I have the eyefi wireless sd card in my camera and it is setup to transmit my photos into iphoto automatically, which it does. However, the problem arises in that iphoto creates multiple events for the same date each containing only one photo. I would prefer that iphoto create individual events per date and have the multiples of that date's photos within. I thought I had the settings configured to do so as I have preferences set for autosplit events one per day but I still see events such as - July 3, 2008 - July 3, 2008 - July 3, 2008 - each with only one photo inside.
I am wondering if it is something in iphoto's settings or the way in which eyefi transmits the photos into iphoto.
Any thoughts?

I do not have a WiFi connection to my camera so can not test but am just guessing
I can think of two possibilities
- 1 - if you are taking the photos with the WiFi connected then each time you snap a photo it may be being sent which would be looked at as a new import and therefore create a new event - to stop this I believe you would have to not have a full time WiFi connection to your camera or somehow set the camera to send batched - not each one - iPhoto will take each batch into and follow the rules for making events for that batch even if you camera is sending many batches of One photo
- 2 - You have the preference for making batches set to one every two hours and there is a long time between photos - I'm guessing that #1 is more likely
LN

Two 4th gen iPods, only one works via firewire

I've had my 4th gen iPod for a while now. I just got my wife one over craigslist. Hers came with a firewire connection. However, only my Ipod will sync with our iMac 10.4.11, iTunes 7.6. Her ipod only charges. I know that after the 4th gen's firewire was no longer available for syncing. Why would only one of the two ipods work with firewire when they are identical? (both running ipod software 3.1.1)

It looks like the answer to my problems was a bad hard drive. Sent it to the ipod doctor and after a $159 repair, I'm back in business http://nycipoddoctor.com/

Multiple alarms 'swapping' so that only one works

Similar Messages

Maybe you are looking for