Multiple ALV

Hi all,
I am using alv grid to display a report.
As I click one of the radio button One report should be displayed.When we click another button another set of report should be displayed. Each report uses different itab.
I need to commonize the use of the fn REUSE_ALV_BLOCK_GRID_DISPLAY.
I dont want to use the same fn again but with different itab name.
Regards,
Priya

Hi,
you could use your radio button to change the search of the fieldcatalog.
Don't set the name of any structure, just the fieldcatalog.
I think, you must use the internal table to set the data into the ALV Grid.
Rgd
Frédéric

Similar Messages

Multiple ALV Grids on the same window.

Hi,
Can someone tell me if it's possible to display multiple ALV grids on the same window.If so how is it done.Please note that I am talking about Grid Display and not List Display.
Regards,
Swathi Balakrishnan

Hi,
This can be done even i have done a report.
Its very simple create three containers as below.
Just repeat three times if u need to create three containers.
See this sample code using custom container.
START-OF-SELECTION.
Begin of process logic
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS01'.
SET TITLEBAR 'SALESTTL'.
A L V G R I D
IF o_grid_container IS INITIAL.
 CREATE OBJECT o_grid_container
 EXPORTING
 container_name = 'CCONTAINER1'.
 CREATE OBJECT o_grid
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid_container.
FOR first A L V G R I D
 PERFORM set_grid_field_catalog
 CHANGING i_grid_fcat.
 PERFORM modify_grid_fcat_predisplay
 CHANGING i_grid_fcat.
 PERFORM set_grid_layout_set
 CHANGING struct_grid_lset.
 PERFORM sort_outtable CHANGING i_sort_fcat.
PERFORM populate_grid_data TABLES i_grid_outs i_grid_outs_pro.
 SORT i_grid_outs BY year month.
 CALL METHOD o_grid->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid_lset
 CHANGING
 it_outtab = i_grid_outs[]
 it_fieldcatalog = i_grid_fcat[]
 it_sort = i_sort_fcat. " Period
ENDIF.
IF o_grid1_container IS INITIAL.
 CREATE OBJECT o_grid1_container
 EXPORTING
 container_name = 'CCONTAINER2'.
 CREATE OBJECT o_grid1
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid1_container.
* FOR SECOND ALV GRID
 PERFORM set_grid1_field_catalog
 CHANGING i_grid1_fcat.
 PERFORM modify_grid1_fcat_predisplay
 CHANGING i_grid1_fcat.
 PERFORM set_grid1_layout_set
 CHANGING struct_grid1_lset.
 PERFORM sort_outtable1 CHANGING i_sort_fcat1.
PERFORM populate_grid1_data TABLES i_grid1_outs i_grid1_outs_pro.
 SORT i_grid1_outs BY year month.
 CALL METHOD o_grid1->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid1_lset
 CHANGING
 it_outtab = i_grid1_outs[]
 it_fieldcatalog = i_grid1_fcat[]
 it_sort = i_sort_fcat1. " Period
ENDIF.
IF o_grid2_container IS INITIAL.
 CREATE OBJECT o_grid2_container
 EXPORTING
 container_name = 'CCONTAINER3'.
 CREATE OBJECT o_grid2
 EXPORTING
 i_appl_events = 'X'
 i_parent = o_grid2_container.
FOR THIRD ALV GRID
 PERFORM set_grid2_field_catalog
 CHANGING i_grid2_fcat.
 PERFORM modify_grid2_fcat_predisplay
 CHANGING i_grid2_fcat.
 PERFORM set_grid2_layout_set
 CHANGING struct_grid2_lset.
PERFORM populate_grid2_data TABLES i_grid2_outs i_grid2_outs_pro.
 SORT i_grid2_outs BY year month.
 PERFORM sort_outtable2 CHANGING i_sort_fcat2.
 CALL METHOD o_grid2->set_table_for_first_display
 EXPORTING
 i_bypassing_buffer = space
 is_variant = ws_f_grid_disvar
 i_save = ws_c_grid_save
 is_layout = struct_grid2_lset
 CHANGING
 it_outtab = i_grid2_outs[]
 it_fieldcatalog = i_grid2_fcat[]
 it_sort = i_sort_fcat2. " Period
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
As the events are registered as application events, control is first
passed to the program's PAI. The call 'cl_gui_cfw=>dispatch' will
forward control to ABAP object event handling and the appropriate
event handler will be called (if present). This allows the user to
selectively process events.
DATA: i_return_code TYPE i .
CALL METHOD cl_gui_cfw=>dispatch
 IMPORTING return_code = i_return_code.
save_ok = ok_code.
CASE save_ok.
 WHEN 'BACK' OR 'END' OR 'CANC'.
 PERFORM exit_program.
ENDCASE.
CLEAR save_ok.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form EXIT_PROGRAM
 text
FORM exit_program.
CALL METHOD o_grid_container->free.
CALL METHOD o_grid1_container->free.
CALL METHOD o_grid2_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
 Error in FLush
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. " EXIT_PROGRAM
If u want get more idea revert back to me.
Thanks & Regards,
Judith.

Single Printing for Multiple ALVs in Splitter Containers

Hi,
I am creating multiple ALVs (3 to 4) of CL_GUI_ALV_GRID class in my report. The ALVs are being displayed inside the splitter containers of class CL_GUI_SPLITTER_CONTAINER. My question is how to print all the ALVs inside these multiple containers with a single execution? I've found a close answer to this at this thread but it is using the REUSE_ALV... function.
How to print multiple ALV Grids with only one print dialog?
Is there a way to do this by making use of the CL_GUI_ALV_GRID printing functionality, if there is?
Thanks for your kind attention,
Kamal.

-found alternative.

What's the coolest, slickest way to present multiple ALV reports?

Greetings and good day, everyone.
Okay, I'm working on an update program, and the users have identified at least three different reports they would like coming out of this thing. One report is a list of transactions that fail internal logic checking, the second report is a list of transactions that pass internal logic checking but fail to update via a BAPI, and a third report is a list of transactions that pass checks and process correctly (i.e. update the database) via the BAPI.
At first, still being a newbie, I was wondering how I was going to create multiple ALV reports. I know I could do this using the WRITE statement, writing each report one after the other, but they have asked for the ALV report so they can do all the ad-hoc manipulating, sorting, etc. that ALV provides.
I came up with these options:
1. Instead of filling my single screen with the container control for an ALV report, as I usually do, this time I could put three containers on the screen. However, I know that cramps space, and I don't know if they'll be able to adjust or move things around other than scrolling.
2. Display a single ALV report on the screen, but have buttons somehow on the top that somehow take the user to other screens for the other reports.
3. First give the user a screen with all the buttons for the reports. They choose one, and the ALV report displays. They can click back to return to this screen, then choose a different report.
Nobody else in the office has done anything like this yet using the ALV, so I've got a chance to break some new ground internally and do something slick. Which option is best, and if so, do you have examples or general guidelines of how I do it? I've not had dialog programming, although I do understand the concepts from VB/Delphi experience over 10 years ago. I think I lean toward option 2, but I figured this couldn't be new ground in the SAP world and surely someone's done exactly this sort of thing.
Please help! ALL helpful responses, as always, are awarded points! Thanks so much!
Dave

Dave,
These are all good suggestions. I would just remember to keep in mind when designing your report two different things.
1. Can your program be run in foreground or background? If it has to be run in background due to data volumes you will lose all interactive capabilities of ALV. You might also not be able to do three different ALVs on the screen in background.
2. I am not sure if I understand your option 3 but if you are talking about the user selecting the options before the load the data, they might have to attempt to load the data multiple times to get all of the report.
My recommendation ( I think somebody already mentioned this) is to have a single ALV with a column on your report that the user can then sort or filter by. This way you are not limited to a program that has to be run in foreground.
Chris

How can I add a custom title to multiple ALV reports selected by layout?

Greetings and good day, everyone!
Within the past week or so, I posted a question asking the best way to create a program that would generate multiple ALV reports. I got some great ideas, and I've actually coded up a few simple demos based on your feedback -- thank you!
Here's the issue I'm running into: Many of you suggested that I put all report records into one table, and create a field that I could use to filter on later to determine which fields I want to display for the report. For example, if I have 3 different reports, I put all the fields for all 3 reports into a table. I then add a "report key" field. As I put records into the report table for report 1, I code "01" into the "report key" field. I do the same for reports 2 and 3, assigning each a "report key" of "02" and "03", respectively.
I then set up layouts in the ALV for each of the three reports, using the filter option to only pull records with the "report key" value for that particular report. This all works wonderfully! However, I seem to have lost the ability to show a custom title for each layout. I can create a generic TITLEBAR (like "Reporting Center") but I don't know how to reset the grid's title when a layout is selected. I was hoping that SAP might use the layout description as the title on each page, but it doesn't -- it uses the TITLEBAR text.
Any ideas? I think this might be the best way to program multiple ALV reports, but if I can't display the right report title for a particular layout, I'll probably have to go back to my other alternative of putting each report in its own container/screen, and having a button to access each report from the application toolbar.
Thanks,

Srikanth,
I don't have any Selection Screen radio buttons for the user to select a particular report; in my case, they specify some needed criteria by the program in the Selection Screen, the program goes off and does a fair bit of processing/updating, and then displays the ALV reports when finished. They don't want to choose one particular report to view ahead of time; they want to have all 3 (in my case) there to see what processed correctly, what was eligible to process but kicked out with errors, and what failed some matching checks done up front (this layout includes additional fields from the input file so they can see what didn't match up against R/3).
So, while I do like the code example you presented, I don't think it's going to help me in my case.

Multiple ALV GRID reports on a single page

hi all
I have an urgent requirement where I need to show 2-3 alv grids on a single page. Please let me know if it is possible to do so. If yes how. Sample code would be very helpful.
thanks in advance.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 16, 2008 1:45 PM

HI,
Create multiple custom containers and call the method CALL METHOD sap_grid->set_table_for_first_display multiple times.
This will display multiple ALV grids on a single page.
Code Below:
MODULE create_objects OUTPUT.
CREATE OBJECT g_custom_container
 EXPORTING
 PARENT =
 container_name = 'CUST_CRTL'
 STYLE =
 LIFETIME = lifetime_default
 REPID =
 DYNNR =
 NO_AUTODEF_PROGID_DYNNR =
EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6
IF sy-subrc <> 0.
 MESSAGE e143(z1).
ENDIF.
*Create object for sap grid
CREATE OBJECT sap_grid
 EXPORTING
 I_SHELLSTYLE = 0
 I_LIFETIME =
 i_parent = g_custom_container
 I_APPL_EVENTS = space
 I_PARENTDBG =
 I_APPLOGPARENT =
 I_GRAPHICSPARENT =
 I_NAME =
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE e144(z1).
ENDIF.
CREATE OBJECT g_custom_container1
 EXPORTING
 PARENT =
 container_name = 'CUST_CRTL1'
 STYLE =
 LIFETIME = lifetime_default
 REPID =
 DYNNR =
 NO_AUTODEF_PROGID_DYNNR =
EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6
IF sy-subrc <> 0.
 MESSAGE e143(z1).
ENDIF.
*Create object for sap grid
CREATE OBJECT sap_grid1
 EXPORTING
 I_SHELLSTYLE = 0
 I_LIFETIME =
 i_parent = g_custom_container1
 I_APPL_EVENTS = space
 I_PARENTDBG =
 I_APPLOGPARENT =
 I_GRAPHICSPARENT =
 I_NAME =
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE e144(z1).
ENDIF.
CREATE OBJECT g_custom_container2
 EXPORTING
 PARENT =
 container_name = 'CUST_CRTL2'
 STYLE =
 LIFETIME = lifetime_default
 REPID =
 DYNNR =
 NO_AUTODEF_PROGID_DYNNR =
EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5
 OTHERS = 6
IF sy-subrc <> 0.
 MESSAGE e143(z1).
ENDIF.
*Create object for sap grid
CREATE OBJECT sap_grid2
 EXPORTING
 I_SHELLSTYLE = 0
 I_LIFETIME =
 i_parent = g_custom_container2
 I_APPL_EVENTS = space
 I_PARENTDBG =
 I_APPLOGPARENT =
 I_GRAPHICSPARENT =
 I_NAME =
 EXCEPTIONS
 error_cntl_create = 1
 error_cntl_init = 2
 error_cntl_link = 3
 error_dp_create = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE e144(z1).
ENDIF.
ENDMODULE. " create_objects OUTPUT
*& Module fill_fcat OUTPUT
 text
MODULE fill_fcat OUTPUT.
CONSTANTS : lc_x TYPE c VALUE 'X',
 lc_a TYPE c VALUE 'D'.
*Prepare field catalog for all Summary Report
wa_field-fieldname = 'BUKRS'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '12'.
wa_field-col_pos = '1'.
wa_field-coltext = text-002. "'Company Code'.
APPEND wa_field TO fcat.
CLEAR wa_field.
wa_field-fieldname = 'CURR'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '10'.
wa_field-col_pos = '2'.
wa_field-coltext = text-022."'Currency'.
APPEND wa_field TO fcat.
CLEAR wa_field.
wa_field-fieldname = 'KUNNR'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '10'.
wa_field-col_pos = '3'.
wa_field-coltext = text-005."'Customer Number'.
APPEND wa_field TO fcat.
CLEAR wa_field.
wa_field-fieldname = 'NAME1'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '13'.
wa_field-col_pos = '4'.
wa_field-coltext = text-007."'Customer Name'.
APPEND wa_field TO fcat.
CLEAR wa_field.
wa_field-fieldname = 'KLIMK'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '12'.
wa_field-col_pos = '5'.
wa_field-coltext = text-008. " 'Credit Limit'.
APPEND wa_field TO fcat.
CLEAR wa_field.
wa_field-fieldname = 'DMBTR'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '16'.
wa_field-col_pos = '6'.
wa_field-coltext = text-009. "'Current Balance Calculated'.
APPEND wa_field TO fcat.
CLEAR wa_field.
CLEAR wa_field.
wa_field-fieldname = 'BLNC'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '23'.
wa_field-col_pos = '7'.
wa_field-coltext = g_bal_date. "'Balance b/f @ (Date taken from Z table) '.
wa_field-fix_column = 'X'.
APPEND wa_field TO fcat.
CLEAR wa_field.
CLEAR wa_field.
wa_field-fieldname = 'DATE'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '8'.
wa_field-col_pos = '7'.
wa_field-coltext = text-021. "'Balance b/f Date @ Z Table balance'.
APPEND wa_field TO fcat.
CLEAR wa_field.
CLEAR wa_field.
wa_field-fieldname = 'INVOICES'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '13'.
wa_field-col_pos = '8'.
wa_field-coltext = text-012. "'Invoices'.
APPEND wa_field TO fcat.
CLEAR wa_field.
CLEAR wa_field.
wa_field-fieldname = 'PAYMENTS'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '13'.
wa_field-col_pos = '9'.
wa_field-coltext = text-013. "'Payments'.
APPEND wa_field TO fcat.
CLEAR wa_field.
CLEAR wa_field.
wa_field-fieldname = 'DMBTR'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '23'.
wa_field-col_pos = '10'.
wa_field-coltext = g_bal_date1. "'Balance c/f @ (Date of Lodgement from selection screen)'.
APPEND wa_field TO fcat.
CLEAR wa_field.
CLEAR wa_field.
wa_field-fieldname = 'CHECK'.
wa_field-tabname = 'T_BSID_BSAD'.
wa_field-outputlen = '13'.
wa_field-col_pos = '11'.
wa_field-coltext = text-020. "'CHECK'.
APPEND wa_field TO fcat.
CLEAR wa_field.
CLEAR g_layout.
g_layout-zebra = lc_x.
g_layout-sel_mode = lc_a.
*Prepare field catalog for all Invoice Extract
wa_field1-fieldname = 'BUKRS'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '12'.
wa_field1-col_pos = '1'.
wa_field1-coltext = text-002. "'Company Code'.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
wa_field1-fieldname = 'KUNNR'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '13'.
wa_field1-col_pos = '2'.
wa_field1-coltext = text-005."'Customer Number'.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
wa_field1-fieldname = 'NAME1'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '13'.
wa_field1-col_pos = '3'.
wa_field1-coltext = text-007."'Customer Name'.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
wa_field1-fieldname = 'GJAHR'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '7'.
wa_field1-col_pos = '4'.
wa_field1-coltext = text-015. " 'Fiscal Year'.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
wa_field1-fieldname = 'BELNR'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '10'.
wa_field1-col_pos = '5'.
wa_field1-coltext = text-016. "'Invoice Number'.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
CLEAR wa_field1.
wa_field1-fieldname = 'CURR'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '8'.
wa_field1-col_pos = '6'.
wa_field1-coltext = text-022."'Currency'.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
wa_field1-fieldname = 'DMBTR'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '13'.
wa_field1-col_pos = '7'.
wa_field1-coltext = text-017. "'Invoice Amount '.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
CLEAR wa_field1.
wa_field1-fieldname = 'BLDAT'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '12'.
wa_field1-col_pos = '8'.
wa_field1-coltext = text-018. "'Date of Shipment'.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
CLEAR wa_field1.
wa_field1-fieldname = 'DUEDT'.
wa_field1-tabname = 'T_INVOICE'.
wa_field1-outputlen = '13'.
wa_field1-col_pos = '9'.
wa_field1-coltext = text-019. "'Due Date Calculated'.
APPEND wa_field1 TO fcat1.
CLEAR wa_field1.
CLEAR g_layout1.
g_layout1-zebra = lc_x.
g_layout-sel_mode = lc_a.
*Prepare field catalog for all Payment Extract
CLEAR wa_field2.
wa_field2-fieldname = 'BUKRS'.
wa_field2-tabname = 'T_PAYMENT'.
wa_field2-outputlen = '12'.
wa_field2-col_pos = '1'.
wa_field2-coltext = text-002. "'Company Code'.
APPEND wa_field2 TO fcat2.
CLEAR wa_field2.
CLEAR wa_field2.
wa_field2-fieldname = 'KUNNR'.
wa_field2-tabname = 'T_PAYMENT'.
wa_field2-outputlen = '13'.
wa_field2-col_pos = '2'.
wa_field2-coltext = text-005. "'Customer Number'.
APPEND wa_field2 TO fcat2.
CLEAR wa_field2.
CLEAR wa_field2.
wa_field2-fieldname = 'NAME1'.
wa_field2-tabname = 'T_PAYMENT'.
wa_field2-outputlen = '13'.
wa_field2-col_pos = '3'.
wa_field2-coltext = text-007. "'Customer Name'.
APPEND wa_field2 TO fcat2.
CLEAR wa_field2.
CLEAR wa_field2.
wa_field2-fieldname = 'GJAHR'.
wa_field2-tabname = 'T_PAYMENT'.
wa_field2-outputlen = '11'.
wa_field2-col_pos = '4'.
wa_field2-coltext = text-015. "'Fiscal Year'.
APPEND wa_field2 TO fcat2.
CLEAR wa_field2.
CLEAR wa_field2.
wa_field2-fieldname = 'BELNR'.
wa_field2-tabname = 'T_PAYMENT'.
wa_field2-outputlen = '13'.
wa_field2-col_pos = '5'.
wa_field2-coltext = text-016. "'Invoice Number'.
APPEND wa_field2 TO fcat2.
CLEAR wa_field2.
CLEAR wa_field2.
wa_field2-fieldname = 'CURR'.
wa_field2-tabname = 'T_PAYMENT'.
wa_field2-outputlen = '11'.
wa_field2-col_pos = '6'.
wa_field2-coltext = text-022."'Currency'.
APPEND wa_field2 TO fcat2.
CLEAR wa_field2.
wa_field2-fieldname = 'DMBTR'.
wa_field2-tabname = 'T_PAYMENT'.
wa_field2-outputlen = '13'.
wa_field2-col_pos = '7'.
wa_field2-coltext = text-017. "'Invoice Amount'.
APPEND wa_field2 TO fcat2.
CLEAR wa_field2.
CLEAR g_layout2.
g_layout2-zebra = lc_x.
g_layout-sel_mode = lc_a.
ENDMODULE. " fill_fcat OUTPUT
*& Module display_data OUTPUT
 text
MODULE display_data OUTPUT.
g_layout3-variant = g_save.
CALL METHOD sap_grid->set_table_for_first_display
 EXPORTING
 I_BUFFER_ACTIVE =
 I_BYPASSING_BUFFER =
 I_CONSISTENCY_CHECK =
 i_structure_name = 'gt_display'
 is_variant = g_layout3
 i_save = 'A'
 i_default = 'X'
 is_layout = g_layout
 IS_PRINT =
 IT_SPECIAL_GROUPS =
 IT_TOOLBAR_EXCLUDING =
 IT_HYPERLINK =
 IT_ALV_GRAPHICS =
 IT_EXCEPT_QINFO =
 CHANGING
 it_outtab = t_bsid_bsad
 it_fieldcatalog = fcat
 IT_SORT =
 IT_FILTER =
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4 .
IF sy-subrc <> 0.
 MESSAGE e145(z1).
ENDIF.
g_layout4-variant = g_save1.
CALL METHOD sap_grid1->set_table_for_first_display
 EXPORTING
 I_BUFFER_ACTIVE =
 I_BYPASSING_BUFFER =
 I_CONSISTENCY_CHECK =
 i_structure_name = 'gt_display1'
 is_variant = g_layout4
 i_save = 'A'
 i_default = 'X'
 is_layout = g_layout1
 IS_PRINT =
 IT_SPECIAL_GROUPS =
 IT_TOOLBAR_EXCLUDING =
 IT_HYPERLINK =
 IT_ALV_GRAPHICS =
 IT_EXCEPT_QINFO =
 CHANGING
 it_outtab = t_invoice
 it_fieldcatalog = fcat1
 IT_SORT =
 IT_FILTER =
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4 .
IF sy-subrc <> 0.
 MESSAGE e145(z1).
ENDIF.
g_layout5-variant = g_save2.
CALL METHOD sap_grid2->set_table_for_first_display
 EXPORTING
 I_BUFFER_ACTIVE =
 I_BYPASSING_BUFFER =
 I_CONSISTENCY_CHECK =
 i_structure_name = 'gt_display2'
 is_variant = g_layout5
 i_save = 'A'
 i_default = 'X'
 is_layout = g_layout2
 IS_PRINT =
 IT_SPECIAL_GROUPS =
 IT_TOOLBAR_EXCLUDING =
 IT_HYPERLINK =
 IT_ALV_GRAPHICS =
 IT_EXCEPT_QINFO =
 CHANGING
 it_outtab = t_payment
 it_fieldcatalog = fcat2
 IT_SORT =
 IT_FILTER =
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4 .
IF sy-subrc <> 0.
 MESSAGE e145(z1).
ENDIF.
ENDMODULE. " display_data OUTPUT
*& Module exit INPUT
 text
MODULE exit INPUT.
CALL METHOD g_custom_container->free.
CLEAR t_bsid_bsad[].
CALL METHOD g_custom_container1->free.
CLEAR t_invoice[].
CALL METHOD g_custom_container2->free.
CLEAR t_payment[].
LEAVE PROGRAM.
ENDMODULE. " exit INPUT
*& Module user_command_1100 INPUT
 text
MODULE user_command_1100 INPUT.
MOVE g_ok_code TO g_saveok_code.
CLEAR g_ok_code.
CASE g_saveok_code.
*on BACK leave program
 WHEN 'BACK'.
 CALL METHOD g_custom_container->free.
 CALL METHOD g_custom_container1->free.
 CALL METHOD g_custom_container2->free.
 CLEAR: g_custom_container,
 g_custom_container1,
 g_custom_container2.
 LEAVE PROGRAM.
 SET SCREEN 1000.
 CALL TRANSACTION 'Z5172'.
 CALL SELECTION-SCREEN 1000.
 set screen 0.
 leave screen.
*on CANCEL leave program
 WHEN 'EXIT'.
 CALL METHOD g_custom_container->free.
 CALL METHOD g_custom_container1->free.
 CALL METHOD g_custom_container2->free.
 LEAVE PROGRAM.
*on CANCEL leave program
 WHEN 'CANCEL'.
 CALL METHOD g_custom_container->free.
 CALL METHOD g_custom_container1->free.
 CALL METHOD g_custom_container2->free.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " user_command_1100 INPUT

Multiple ALV Objects in one Report

I have multiple ALV ojbects in one ABAP report (one a grid, and one a tree). When selecting the choose display layout for either object - it returns the layouts for BOTH objects. Is there any way of limiting this to only return the layouts for the appropriate object?
Thanks in advance.

Hi Heather,
in methode set_table_for_first_display you can use the parameter is_variant of type DISVARIANT. Use the field HANDLE in this structure to distinguish the two ALV Objects. Fill also field REPORT of the same structure with sy-repid.
Regards Florian

Display Multiple ALV layouts on one screen

Hi,
I have created 4 ALV Catalogues named: ALVCAT1, ALVCAT2, ALVCAT3, ALVCAT4
I have also created the corresponding internal tables with data for each catalogue: ALVITAB1, ALVITAB2, ALVITAB3, ALVITAB4
I have so far used the following function to generate each of the catalogues above:
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME     = SY-CPROG
      I_INTERNAL_TABNAME = 'ALVITAB1'
      I_INCLNAME         = SY-CPROG
    CHANGING
      ct_fieldcat        = ALVCAT1[].
And I have used the following function module to display the table as ALV:-
*DISPLAYING REPORT AS ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = SY-CPROG
      I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
      i_callback_user_command = 'USER_COMMAND'
      IT_FIELDCAT             = ALVCAT1[]
     i_screen_start_column = 10
     i_screen_start_line   = 15
     i_screen_end_column   = 200
     i_screen_end_line     = 20
    TABLES
      t_outtab                = ALVITAB1.
How can I now using the above function modules or similar function modules to DISPLAY multiple ALV layouts on a single SCREEN. Each layout should be treated separately with their own ALV tool bar etc.
In this case i need to display 4 screens but I have scenarios where i need to also display 5.
Would be really grateful for your guidance with source code to achieve this.....
Thnx
Salman
Edited by: Salman Akram on Sep 20, 2010 2:47 PM

Hi
Try this [Link|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=61243570] or the below program
BCALV_TEST_GRID_DRAG_DROP
or else
Try to use splitter container to display multiple ALVs on one screen
here is the demo program RSDEMO_SPLITTER_CONTROL
the below code will help you to call grid using splitter control
     EXPORTING
        container_name = 'CUSTOM'.
    CREATE OBJECT splitter
      EXPORTING
        parent = container
        rows    = 1
        columns = 1
        align   = 15.
    CALL METHOD splitter->set_row_height
      EXPORTING
        id     = 1
        height = 1.
    CALL METHOD splitter->get_container
      EXPORTING
        row       = 1
        column    = 1
      RECEIVING
        container = container_1.
    CREATE OBJECT grid1
      EXPORTING
        i_parent = container_1.
    CALL METHOD grid1->set_table_for_first_display
      EXPORTING
        is_layout       = gss_layout
        is_variant      = lwa_variant
        i_save          = 'A'
      CHANGING
        it_outtab       = gt_report_list
        it_fieldcatalog = gtt_fld_cat.
Regards
Edited by: Anesht on Sep 20, 2010 11:49 PM

Multiple ALV Display

Hi All,
How can i display Multiple ALV Grids at a time in the output screen ?
I have to create dynamic table structures for each ALV, but all this ALV's has to be displayed at 1 time in the first output screen!
Regards
Rakesh.

Have a custom control on the screen.
Create a custom conatiner.
Use EASY splitter container.
Now you have two containers, in which each of the ALV grids can be displayed with the two dynamic tables you have.
Look at the BCALV examples in your system.
Regards,
Ravi
Note - Please mark all the helpful answers

How to create Multiple ALV Lists, Each list on one new page

Hi All,
I have a requirement of displayiong data on multiple ALV Lists.
Ex:
I have data in internal table MATNR QTY   VALUE
M1   2    3USD
M1   2    3USD
M2   2    3USD
M2   2    3USD
M3   2    3USD
M3 2    3USD
M4 2    3USD
M4   2    3USD
In The above internal table data , i have to displat M1 on one page and M2 on second,M3 on third and M4 on 4th page.....This may go to MN.
I have tried to do this with REUSE_ALV_BLOCK_LIST_APPEND, But if Lists are fixed like 3 or 4 , I can use this method.
Can any one help me on this?
Thanks,
Suresh.

Hi Peter,
Yes I think that this is the way we will be probably go but not sure what the correct terms are for what I am looking for. Not sure if you are allowed to post examples of specific commercial plug ins here but if not, what should I search for. I know if sounds daft but it's a real case of not knowing what it is I am looking for. I am a complete InDesign newcomer who uses it at the moment for simple flyers etc so more than happy to find someone who can do the more complex stuff for me. The price lists will need to be done inhouse and on a regular basis.
thanks
Jen

Multiple ALV display in one screen using SALV(Factory method)...

Hello Experts,
I tried using the old 'REUSE_ALV_BLOCK_LIST_APPEND' but it does not suit my
requirement. So will it be possible to display multiple ALV display(block) using
SALV?

check the sample code..
REPORT zsalv_demo_multiple.
DATA: salv1 TYPE REF TO cl_salv_table,
      salv2 TYPE REF TO cl_salv_table,
      salv3 TYPE REF TO cl_salv_table.
DATA: g_custom TYPE REF TO cl_gui_custom_container,
o_splitter    TYPE REF TO cl_gui_splitter_container,
o_grid1 TYPE REF TO cl_gui_container,
o_grid2 TYPE REF TO cl_gui_container,
o_grid3 TYPE REF TO cl_gui_container.
DATA: it_flight TYPE STANDARD TABLE OF sflight,
      it_carr TYPE TABLE OF scarr,
      it_book TYPE TABLE OF sbook.
START-OF-SELECTION.
SELECT * FROM sflight
INTO TABLE it_flight
UP TO 20 ROWS.
SELECT * FROM scarr
INTO TABLE it_carr
UP TO 20 ROWS.
SELECT * FROM sbook
INTO TABLE it_book
UP TO 20 ROWS.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ABC'.
CREATE OBJECT g_custom
EXPORTING container_name = 'CONT'.
CREATE OBJECT o_splitter
EXPORTING parent = g_custom
rows    = 3
columns = 1.
CALL METHOD o_splitter->get_container
    EXPORTING
      row       = 1
      column    = 1
    RECEIVING
      container = o_grid1.
CALL METHOD o_splitter->get_container
    EXPORTING
      row       = 2
      column    = 1
    RECEIVING
      container = o_grid2.
CALL METHOD o_splitter->get_container
    EXPORTING
      row       = 3
      column    = 1
    RECEIVING
      container = o_grid3.
cl_salv_table=>factory(
    EXPORTING
      r_container    = o_grid1
    IMPORTING
      r_salv_table   = salv1
    CHANGING
      t_table        = it_flight
cl_salv_table=>factory(
    EXPORTING
      r_container    = o_grid2
    IMPORTING
      r_salv_table   = salv2
    CHANGING
      t_table        = it_carr
cl_salv_table=>factory(
    EXPORTING
      r_container    = o_grid3
    IMPORTING
      r_salv_table   = salv3
    CHANGING
      t_table        = it_book
CALL METHOD salv1->display.
CALL METHOD salv2->display.
CALL METHOD salv3->display.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
Flow Logic..
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
in the Screen i placed a custom control and named it as CONT

Reg multiple ALV grid in a window

Hi friends,
I have an interesting requirement where i need to have multiple alv grid in my screen, how do i accomplish this, i cannot use containers in my screen as the number of grids in my screen vary.

Have a look at standard transaction DWDM.
Regards,
Aparna

Default Layout for Multiple ALV displays

Hello All,
I have a requirement where I am displaying multiple ALV grid displays on different tabs of a screen.
Now I have to set a default layout for each of the grids separately as they have different fields.
Please let me know how to do it, I am using OO ALV display.
Thanks a lot
Ruchi

Hi,
According to your grid called pass the variant name
 gs_variant-report = sy-repid.
 gs_variant-username = sy-uname.
 gs_variant-variant = v_vari. " Your variant Name
 call method grid1->set_table_for_first_display
 exporting
 is_layout = gs_layout
 is_variant = gs_variant "<<<<<<<<<
 i_save = 'A'
 it_toolbar_excluding = i_exclude[]
 changing
 it_outtab = i_output[]
 it_fieldcatalog = i_fieldcat[]
 exceptions
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 others = 4.
a®

Writing text above multiple ALV list

Hi,
I have multiple ALV lists and want to add a different text above each one. How can this be achieved? I am using sort to separate the lists. thanks
sort-fieldname = 'MATNR'.
sort-up = 'X'.
sort-group = '*'.
APPEND sort TO it_sort.
CLEAR sort.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    i_callback_program = sy-repid
    it_fieldcat        = it_fieldcat
    it_sort            = it_sort
TABLES
    t_outtab           = it_data
EXCEPTIONS
    program_error      = 1.
Edited by: Hin Lai on Jan 7, 2011 9:40 PM

Well, why not debug FBL5N and see how that transaction does this?
Hmmm....
Debugging may not help. The separate lists are handled by the display variant. You should be able to do the same thing if all of your lists use the same field catalog and are in the same or can be put in the same table.
Rob
Edited by: Rob Burbank on Jan 7, 2011 5:36 PM

Multiple ALV Grid Panes in single screen

Hi all,
How can we get multiple ALV Grid panes in single output.
Is it possible to get the same without using OOPS.
Thanks in advance.
Eswar

Hi,
You can do this by creating 2 custom controls on the layout of the screen, and then you will also need to create 2 custom containers in your ABAP program, 1 for each ALV.
Ex :
grid TYPE REF TO cl_gui_alv_grid,
custom_container TYPE REF TO cl_gui_custom_container,
grid TYPE REF TO cl_gui_alv_grid,
custom_container TYPE REF TO cl_gui_custom_container,
regards,
Advait

Multiple ALV reports on one page

How to display multiple ALV reports on one page.

this done by this code....
*& Report ZPR_02
REPORT ZPR_02.
TYPE-POOLS: SLIS.
Tables Declaration.
TABLES: MARA.
*Internal tables and data declaration.
DATA: BEGIN OF IT_MARA OCCURS 0,
 MATNR LIKE MARA-MATNR,
 MTART LIKE MARA-MTART,
 MBRSH LIKE MARA-MBRSH,
 END OF IT_MARA,
 BEGIN OF IT_MARC OCCURS 0,
 MATNR LIKE MARC-MATNR,
 WERKS LIKE MARC-WERKS,
 EKGRP LIKE MARC-EKGRP,
 END OF IT_MARC,
 BEGIN OF IT_MARD OCCURS 0,
 MATNR LIKE MARD-MATNR,
 WERKS LIKE MARD-WERKS,
 LGORT LIKE MARD-LGORT,
 LABST LIKE MARD-LABST,
 END OF IT_MARD.
DATA: WA_FIELD_CAT TYPE SLIS_FIELDCAT_ALV,
 IT_FIELD_CAT1 TYPE SLIS_T_FIELDCAT_ALV,
 IT_FIELD_CAT2 TYPE SLIS_T_FIELDCAT_ALV,
 IT_FIELD_CAT3 TYPE SLIS_T_FIELDCAT_ALV,
 WA_KEYINFO TYPE SLIS_KEYINFO_ALV,
 IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
 IT_EVENTS1 TYPE SLIS_T_EVENT WITH HEADER LINE,
 IT_EVENTS2 TYPE SLIS_T_EVENT WITH HEADER LINE,
 IT_EVENTS3 TYPE SLIS_T_EVENT WITH HEADER LINE.
*Selection Screen.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
*Start Of selection.
START-OF-SELECTION.
*Selecting the data.
PERFORM SELECT_DATA.
*Populating the field catelogue.
PERFORM BUILD_FIELD_CAT.
*Displaying the final output.
PERFORM DISPLY_OUTPUT.
*& Form Select_data
 Selecting the data.
FORM SELECT_DATA .
SELECT MATNR
 MTART
 MBRSH FROM MARA
 INTO TABLE IT_MARA
 WHERE MATNR IN S_MATNR.
IF NOT IT_MARA[] IS INITIAL.
 SELECT MATNR
 WERKS
 EKGRP FROM MARC
 INTO TABLE IT_MARC
 FOR ALL ENTRIES IN IT_MARA
 WHERE MATNR EQ IT_MARA-MATNR.
ENDIF.
IF NOT IT_MARC[] IS INITIAL.
 SELECT MATNR
 WERKS
 LGORT
 LABST FROM MARD
 INTO TABLE IT_MARD
 FOR ALL ENTRIES IN IT_MARC
 WHERE MATNR = IT_MARC-MATNR
 AND WERKS = IT_MARC-WERKS.
ENDIF.
ENDFORM. " Select_data
*& Form Build_field_cat
 Populating the field catelogue.
FORM BUILD_FIELD_CAT .
DEFINE M_FIELDCAT1.
 WA_FIELD_CAT-TABNAME = &1.
 WA_FIELD_CAT-FIELDNAME = &2.
 WA_FIELD_CAT-SELTEXT_L = &3.
 APPEND WA_FIELD_CAT TO IT_FIELD_CAT1.
END-OF-DEFINITION.
DEFINE M_FIELDCAT2.
 WA_FIELD_CAT-TABNAME = &1.
 WA_FIELD_CAT-FIELDNAME = &2.
 WA_FIELD_CAT-SELTEXT_L = &3.
 APPEND WA_FIELD_CAT TO IT_FIELD_CAT2.
END-OF-DEFINITION.
DEFINE M_FIELDCAT3.
 WA_FIELD_CAT-TABNAME = &1.
 WA_FIELD_CAT-FIELDNAME = &2.
 WA_FIELD_CAT-SELTEXT_L = &3.
 APPEND WA_FIELD_CAT TO IT_FIELD_CAT3.
END-OF-DEFINITION.
M_FIELDCAT1 'MARA' 'MATNR' 'Material No'.
M_FIELDCAT1 'MARA' 'MTART' 'Material type'.
M_FIELDCAT1 'MARA' 'MBRSH' 'Industry Sector'.
M_FIELDCAT2 'MARC' 'MATNR' 'Material No'.
M_FIELDCAT2 'MARC' 'WERKS' 'Plant'.
M_FIELDCAT2 'MARC' 'EKGRP' 'Purchasing Group'.
M_FIELDCAT3 'MARD' 'MATNR' 'Material No'.
M_FIELDCAT3 'MARD' 'WERKS' 'Plant'.
M_FIELDCAT3 'MARD' 'LGORT' 'Storage Loc'.
M_FIELDCAT3 'MARD' 'LABST' 'Valued Stock'.
IT_EVENTS1-NAME = 'TOP_OF_PAGE'.
IT_EVENTS1-FORM = 'F_TOP_OF_PAGE_ONE'.
APPEND IT_EVENTS1.
CLEAR IT_EVENTS1.
IT_EVENTS2-NAME = 'TOP_OF_PAGE'.
IT_EVENTS2-FORM = 'F_TOP_OF_PAGE_TWO'.
APPEND IT_EVENTS2.
CLEAR IT_EVENTS2.
IT_EVENTS3-NAME = 'TOP_OF_PAGE'.
IT_EVENTS3-FORM = 'F_TOP_OF_PAGE_THREE'.
APPEND IT_EVENTS3.
CLEAR IT_EVENTS3.
ENDFORM. " Build_field_cat
*& Form disply_output
 Displaying the final output.
FORM DISPLY_OUTPUT .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
 EXPORTING
 IS_LAYOUT = IT_LAYOUT
 IT_FIELDCAT = IT_FIELD_CAT1[]
 I_TABNAME = 'IT_MARA'
 IT_EVENTS = IT_EVENTS1[]
IT_SORT = IT_SORT
I_TEXT = ' '
 TABLES
 T_OUTTAB = IT_MARA .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
 EXPORTING
 IS_LAYOUT = IT_LAYOUT
 IT_FIELDCAT = IT_FIELD_CAT2[]
 I_TABNAME = 'IT_MARC'
 IT_EVENTS = IT_EVENTS2[]
IT_SORT = IT_SORT
I_TEXT = ' '
 TABLES
 T_OUTTAB = IT_MARC .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
 EXPORTING
 IS_LAYOUT = IT_LAYOUT
 IT_FIELDCAT = IT_FIELD_CAT3[]
 I_TABNAME = 'IT_MARD'
 IT_EVENTS = IT_EVENTS3[]
IT_SORT = IT_SORT
I_TEXT = ' '
 TABLES
 T_OUTTAB = IT_MARD .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
IS_PRINT = IS_PRINT
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " disply_output
*& Form top_of_page_one
 text
FORM F_TOP_OF_PAGE_ONE.
WRITE: / 'Header details (MARA)'.
ENDFORM. "top_of_page_one
*& Form top_of_page_one
 text
FORM F_TOP_OF_PAGE_TWO.
WRITE: / 'Item details (MARC)'.
ENDFORM. "top_of_page_one
*& Form top_of_page_one
 text
FORM F_TOP_OF_PAGE_THREE.
WRITE: / 'Item details (MARD)'.
ENDFORM. "top_of_page_one
regards,
venkat.

Multiple ALV

Similar Messages

Maybe you are looking for