Multiple animations on a page

what about creating multiple animations one the same page in
FW? In IR each rollover has it's own animation timeline so you can
make as many animated rollovers as you want, but in fireworks there
is just one frame timeline. I tried getting around this by putting
a animation symbol in the over state on a button but it won't let
me. Don't tell me i have to create individual animations and place
them in dreamweaver!

goatmud wrote:
> what about creating multiple animations one the same
page in FW? In IR each
> rollover has it's own animation timeline so you can make
as many animated
> rollovers as you want, but in fireworks there is just
one frame timeline. I
> tried getting around this by putting a animation symbol
in the over state on a
> button but it won't let me. Don't tell me i have to
create individual
> animations and place them in dreamweaver!
>
At this point, I recommend you post the PNG file so some of
us can take
a look at it.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Similar Messages

Multiple animations for Responsie page

Hi
I am building a website with responsive webdesign in Dreamweaver. For the mobile I want a different animation the tablets/desktops hoe can I do this?
Beceau with the normal responsiveness in Edge the mobile I can;t get the placements good So I want to make two different animations on optimized for mobile (480px width) and the other for tablet/desktop (640 to 960).
this is the website I am working on: 55k-producties.businesscatalyst.com
Regards,
F. Knijn

goatmud wrote:
> what about creating multiple animations one the same
page in FW? In IR each
> rollover has it's own animation timeline so you can make
as many animated
> rollovers as you want, but in fireworks there is just
one frame timeline. I
> tried getting around this by putting a animation symbol
in the over state on a
> button but it won't let me. Don't tell me i have to
create individual
> animations and place them in dreamweaver!
>
At this point, I recommend you post the PNG file so some of
us can take
a look at it.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Multiple animations on one page scale incorrectly

Tried to find an answer but I can only see that having multiple edge animations on one page is troublesome so far. However I've managed to get them working but there's one problem with scaling it responsively:
http://aspekt-management.ru/test/
The idea is having two tabs and in each there's an animation so once I press a button - corresponding tab with animation inside is shown and another one becomes hidden.
But in 2014.1 version second animation always looks small till I resize browser viewport! After resizing browser width even by 1px - animation fits to the frame nicely. But then it breaks the first animation so once I get back to it - it behaves in a similar broken way.
How can I make them both actually fit to their parent divs once loaded?
What makes animations appear in such a size, I'm not sure I've specified anything like this in animations or site css.
This is what I've copied from EA export code to my html:
<script>AdobeEdge.loadComposition('main_process', 'main_process', {
    scaleToFit: "width",
    centerStage: "horizontal",
    bScaleToParent:true,
    minW: "0",
    maxW: "undefined",
    width: "940px",
    height: "260",
}, {"style":{"${symbolSelector}":{"isStage":"true","rect":["undefined","undefined","940px"," 260px"],"fill":["rgba(255,255,255,1)"]}},"dom":[{"rect":["410","70","120px","120px","auto" ,"auto"],"id":"preloader42","fill":["rgba(0,0,0,0)","images/preloader42.gif","0px","0px"], "type":"image","tag":"img"}]}, {"style":{"${symbolSelector}":{"isStage":"true","rect":["undefined","undefined","940px"," 260px"],"fill":["rgba(255,255,255,1)"]}},"dom":[{"rect":["0px","0px","940px","260px","auto ","auto"],"id":"home_process_stat","fill":["rgba(0,0,0,0)","images/home_process_stat.png", "0px","0px"],"type":"image","tag":"img"}]});
   AdobeEdge.loadComposition('main_master', 'main_master', {
    scaleToFit: "width",
    centerStage: "horizontal",
    bScaleToParent:true,
    minW: "0",
    maxW: "undefined",
    width: "940px",
    height: "260"
}, {"dom":[{"rect":["410px","70px","120px","120px","auto","auto"],"id":"preloader42","fill": ["rgba(0,0,0,0)","images/preloader42.gif","0px","0px"],"type":"image","tag":"img"}]}, {"dom":[{"rect":["0px","0px","940px","260px","auto","auto"],"id":"main_master_stat","fill ":["rgba(0,0,0,0)","images/main_master_stat.png","0px","0px"],"type":"image","tag":"img"}] });
     AdobeEdge.bootstrapCallback(function(compId) {
console.log("Composition loaded...", compId);
Ironically, I havent had such a problem before, current website with older animations works correctly:
Aspekt

After some more research, my problem is slightly different from the original post. I'm using setTimeout to stagger the load times of multiple compositions. I'm using bScaleToParent: true to resize the individual compositions within their divs. HOWEVER, if a div's display is hidden when the edge comp is loaded, the composition defaults to the minWidth as set in Edge Animate, and only resizes when the viewport is resized.
I'm working around this by setting the opacity of the hidden divs to 0 instead of the display to none.... but it is NOT ideal.

Is it really true that EA CC 2014 does NOT support multiple animations on a single page?

My page has multiple animations that I have spent days designing, and now my developer is telling me we can only use one.
Is this seriously true? A lack of detail on this issue will surely drive me to use another product like Hype or Google...
http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html#multiplecompositions

Hi,
Please check this article, you can still use multiple composition on a single page, it is working on Edge CC214
Nesting Animate compositions with the Composition Loader by Edge Commons | EdgeDocks.com
I will check more on this with the concern team and let you know.
Regards,
Devendra

Multiple iframes on One Page Trigger One from Another

So I am creating multiple animations on a single page. The page is a PHP page and was built long ago. I am just replacing some images with Edge Animate animations.
I want to do them in a sequence. So I was wondering if there was a way in the time line of one, to trigger the start of another? Each is going to be in an individual iframe. Which I know compounds the issue.
I thought of just putting some lead seconds in each of the animations so they sort of pause, but that would assume all of them load at the exact same time to keep the timing.
Any help would be appreciated.

Due to browser security, I don't think it would be possible to have one iframe talk to another in the way you want.
Is there a reason you are using iframes instead of DIVs?
I created a simple demo of what I think you want to do here, but just using DIVs: http://thetraininggrounds.com/An-test/end-trigger-second-an/combined_an.html
What I did was start with two compositions. In the second one, at 0ms, I set a trigger of sym.stop(); to ensure this would not play until I told it to.
In the first one, I set the complete event (i.e. when it's done playing) to start the second composition. I used the code: Edge.getComposition("EDGE-253701960").getStage().play();
You will, of course, need to substitute the actual composition ID for the one I included in getComposition.
Then it was simply a matter of including the preload .js file for both and the stage divs for both into the same page.
There is definitely more you can do, and I suggest checking out the API documentation for more info: http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html
I hope this helps.

The Best Tool For Multiple Animated Objects

Hi,
I am expirimenting with Flash Web Sites, and I would like suggestions as to a starting point for my project, and I am assuming a Flash website is where I would start.
Basically, If I were to open up a web page, I would like to see multiple animated objects. For example, if I were to simulate an Emergency Room, I would have an EKG displaying a heart rate, then perhaps see a breathing maching apparatus moving up and down, a Drip bag (sorry, don't know the real term), dripping into a patient's tube. And of course, if I were to roll over an object it would animate, and if clicked on more animation or on to another page.
I tried creating the animated objects in Fireworks, and I thought I could combine various Firworks files into one, but it didn't work (too many frames), either becasue I lack the knowlege of how to do this or simply it cannot be done that way in Fireworks. I had a background with one animated flashing object (that was easy), but combining multiple independent objects, I could not figure it out.
Someone suggested that I would have to use Action Scripts, which made me realize, I don't know the best way to accomplish my example above, and although I know I may be over my head, I would just like to get direction as to where I should begin.
Should it all be in Flash in the first place? To continue on with the example above, after a user clicks on the rollover image, a girney comes rolling in and we are giving choices on a monitor with what our next actions should be, which would take us into another page. (this is just to give you perpective of what I am trying to accomplish).
Should I create independent animated objects (files) in Fireworks, then somehow import them into their specified location in Flash.
I hope this makes sense and I am hoping someone is kind enough to provide a starting point.
Best.

Flash is the best tool for what you want and most of it can be done once you get a handle on the basics.
For you interactivity (rollOvers / triggering more animations with mouse) you will need some actionscript but don't get hung up on that now.
There is a world of info out there. Google "animation basics in flash) you may have to weed through some garbage but you will find what you are looking for somewhere.

How can I combine multiple animations. (Play another animation after one has finished with a click?)

How can I combine multiple animations. (Play another animation after one has finished with a click?) Like a slideshow but with animations. any ideas?

You can do this by calling up the different edge Animate composition html pages using buttons and an iframe:
To get a general idea, put this in the body of an html page and insert your own URLs where indicated
<iframe id="iframeID" src="yourFirstURL" width="640" height="480">
<p>Your browser does not support iframes.</p>
</iframe>
<button onclick='loadIframe("iframeID", "firstAnimURL")'>First Animation</button>
<button onclick='loadIframe("iframeID", "secondAnimURL")'>Second Animation</button>
<button onclick='loadIframe("iframeID", "thirdAnimURL")'>Third Animation</button>
<script>
function loadIframe(iframeID,url) {
//alert("Hello");
document.getElementById("iframeID").src = url;
</script>
Peter Small

Bug. Can't put two Edge Animate animations on same page

Alrighty. Just thanked Adobe for fixing responsive scaling issue. Now there seems to be a new one. When I put two Edge Animate animations on the same page, they both disappear entirely from view! Both in live view (or what was fluid grid view) and when trying to preview in any browser. The responsive design is working great but if I put two animations on the same page they both just disappear! GONE!
Maybe there is some code I can use to stop this from happening. I have done a number of tests over the last hour or so. My smile (from the responsive fix) is now a frown again. I can not continue to work like this. Please let me know if there is something I am doing wrong. I could have two animations in one page no worries before this release but the responsive design wasn't working properly. NOW the responsive design works but I can not have MORE THAN ONE ANIMATION on same page. Thanks for your time. Kind regards Julian.

Hi Julian,
First, in general, you can't create two instances of the same edge composition (this is not supported by EdgeRuntime), to be used in the same file.
But if you want to use same composition multiple times, then follow the steps to create multiple copies to be treated as multiple instances:
    1. Open the composition whose multiple instance you want to use.
    2. Change the "Composition Class" to some other value
    3. Do a SaveAs and save it to create another copy of the same composition. // This copy can be treated as an instance.
    4. Repeat the steps 2 to 4, to create multiple copies of the same composition, and you will end up creating multiple instances.
Second, you need to do small changes manually in the DreamWeaver html file.
    So, right now if you import two Edge Compositions in the html page, it will come as follow in the html <head/> section:
Before Modification: Dropbox - problem.rar

<meta http-equiv="X-UA-Compatible" content="IE=Edge">
<script>
var custHtmlRoot="Untitled-1/Assets/";
var script = document.createElement('script');
script.type= "text/javascript";
script.src = custHtmlRoot+"edge_includes/edge.5.0.0.min.js";
var head = document.getElementsByTagName('head')[0], done=false;
script.onload = script.onreadystatechange = function(){
if (!done && (!this.readyState || this.readyState == 'loaded' || this.readyState == 'complete')) {
done=true;
var opts ={
    scaleToFit: "width",
    centerStage: "none",
    minW: "0",
    maxW: "undefined",
    width: "550px",
    height: "400px"
opts.htmlRoot =custHtmlRoot;
AdobeEdge.loadComposition('Untitled-1', 'EDGE-1372833673', opts,
{"dom":{}}, {"dom":{}});
script.onload = script.onreadystatechange = null;
head.removeChild(script);
head.appendChild(script);
</script>
<style>
        .edgeLoad-EDGE-1372833673 { visibility:hidden; }
    </style>


<meta http-equiv="X-UA-Compatible" content="IE=Edge">
<script>
var custHtmlRoot="Untitled-2/Assets/";
var script = document.createElement('script');
script.type= "text/javascript";
script.src = custHtmlRoot+"edge_includes/edge.5.0.0.min.js";
var head = document.getElementsByTagName('head')[0], done=false;
script.onload = script.onreadystatechange = function(){
if (!done && (!this.readyState || this.readyState == 'loaded' || this.readyState == 'complete')) {
done=true;
var opts ={
    scaleToFit: "width",
    centerStage: "none",
    minW: "0",
    maxW: "undefined",
    width: "550px",
    height: "400px"
opts.htmlRoot =custHtmlRoot;
AdobeEdge.loadComposition('Untitled-2', 'EDGE-1372913196', opts,
{"dom":{}}, {"dom":{}});
script.onload = script.onreadystatechange = null;
head.removeChild(script);
head.appendChild(script);
</script>
<style>
        .edgeLoad-EDGE-1372913196 { visibility:hidden; }
    </style>

After Modification:Dropbox - resolved.rar

<meta http-equiv="X-UA-Compatible" content="IE=Edge">
<script>
var custHtmlRoot="Untitled-1/Assets/";
var script = document.createElement('script');
script.type= "text/javascript";
script.src = custHtmlRoot+"edge_includes/edge.5.0.0.min.js";
var head = document.getElementsByTagName('head')[0], done=false;
script.onload = script.onreadystatechange = function(){
if (!done && (!this.readyState || this.readyState == 'loaded' || this.readyState == 'complete')) {
done=true;
var opts ={
scaleToFit: "width",
centerStage: "none",
minW: "0",
maxW: "undefined",
width: "550px",
height: "400px"
opts.htmlRoot =custHtmlRoot;
AdobeEdge.loadComposition('Untitled-1', 'EDGE-1372833673', opts,
{"dom":{}}, {"dom":{}});
script.onload = script.onreadystatechange = null;
head.removeChild(script);
//For 2nd Composition
(function(){
var custHtmlRoot = "Untitled-2/Assets/";
var opts = {
scaleToFit: "width",
centerStage: "none",
minW: "0",
maxW: "undefined",
width: "550px",
height: "400px"
opts.htmlRoot =custHtmlRoot;
AdobeEdge.loadComposition('Untitled-2', 'EDGE-1372913196', opts, {"dom":{}}, {"dom":{}});
head.appendChild(script);
</script>
<style>
        .edgeLoad-EDGE-1372833673 { visibility:hidden; }
        .edgeLoad-EDGE-1372913196 { visibility:hidden; } /* Styles from both composition can be merged together, optional but good practice */
    </style>

Do let me know in case if it doesn't work.
hope it helps,
Vivekuma

Multiple Animations for a single MovieClip sprite

Ok, after hours of exhausting searching, and having to learn how to animate a simple sprite for the 100th time, I hope I might found I more specific, and better explained answer to my problem.
I'm trying to make a flash game, of course, and I want my main Player sprite to be able to play multiple animations based on specific input. So, a running right animation, a running left animation, a jump animation, and an attack animation.
At the moment, the most I can seem to achieve is to create a single timeline, with a default frame in the exact middle. Then when player holds left, it plays the previous frame, or scrolls backwards through the timeline. When the Right key is held, it plays forward from the default middle.
It's ugly and extremely limited. I've tried using the gotoAndStop() and gotoAndPlay() methods, but because the statement checking for the key being pressed is constantly being checked, it will stay on the frame chosen for those methods, rather than move forward along the time line.
I would greatly appreciate a better method for this, or a more specific tutorial to achieve the goal i'm looking for.
I've seen mention of the attachMovie() method, but I can not find an understandable explanation of how to properly use it in the way I desire.
essentially, the sprite will have the default standing frame while no keys are pressed. Then, if the right key is down, it plays the running right animation. When the left key is down, it plays the running left animation. When the jump key is pressed, it plays the jump animation. And when the attack key is pressed, it plays the attack animation.
I hope that's enough information and that it's understandable, if not, let me know what more you need to know and I'll do my best to explain it more.

You can do this a number of ways but I will try to explain the what I think is the easiest.
Step 1
Draw a box on the stage
Step 2
convert this into a movieclip (F8), name this myCharacter (or anything you want really), then press ok. Now select this movieClip and in the properties dialogue box, type "box", again, without the quotes. Then press enter.
Step 3
Double click this new movieClip (this should take you into this movieClip timeline)
Step 4
Now press F6, 3 times. This wil give you 3 additional key frames on this timeline. You should now have 4 key frames.
|Step 5
Select key frame 1 on this timeline and press F8. Type into the diag box "standing", without the quotes. Then select the Movie Clip radio button, if it is not already selected.
Step 6
Step 12
Make sure your library is in view, if not Ctrl+L. You should see the movement clips you created, running_right, running_left, etc. Double Click any one of these and add the animation your want in these movs.
There we go, simples.....Test you animation and see how you are doing.
Select key frame 2 on this timeline and press F8. Type into the diag box "running_right", without the quotes. Then select the Movie Clip radio button, if it is not already selected.
Step 7
Select key frame 3 on this timeline and press F8. Type into the diag box "running_left", without the quotes. Then select the Movie Clip radio button, if it is not already selected.
Step 8
Select key frame 4 on this timeline and press F8. Type into the diag box "jumping", without the quotes. Then select the Movie Clip radio button, if it is not already selected.
Great, once you have done this, these new movieClips should now have appeared in your library (press Ctrl+L if you cannot see your library)
Ok then you have just created your movement MovieClip. You now need to get back to the main timeline. You can just keep on clicking the stage to get back to this location. Once there you need to select the box you have just created and name this "box" for the time being.
Ok then a little bit of programming now.
Step 9Create a new layer in the timeline and name it scripts.
Step 10Then select this layer and press F9 on your keyboard. THis should bring up the scripting pane for this frame.
Step 11Type in the following code
box.stop();// when you run this animation, this command will stop your box from doing anything
var keyBoardListener:Object = new Object();// Creates a new Object for the keyboard presses
keyBoardListener.onKeyDown = function() {
if (Key.isDown(Key.LEFT)) {// runnning LEFT action
_root.box.gotoAndStop(3);// Frame where the running right animation is
} else if (Key.isDown(Key.RIGHT)) {// running RIGHT action
_root.box.gotoAndStop(2);// Frame where the running right animation is
} else if (Key.isDown(Key.UP)) {// JUMPING action
_root.box.gotoAndStop(4);// Frame where the JUMPING animation is
keyBoardListener.onKeyUp = function() {
_root.box.gotoAndStop(1);// When the keys are released, this action takes your animation back to frame 1, where your character is just standing still.
Key.addListener(keyBoardListener);// this assigns the listener to your key press detection Object.
Step 12
Edit the action movs within your library by double clicking each one and adding movement to each. Then test your animation.

How do I attach multiple files from the pages app to my email

I'm trying to attach multiple documents from the "Pages" app to my email. I'm using an ipad. It is only letting me attach one at a time and send each document as individual emails. I would like to be able to send one email with all 4 documents at the same time. Any suggestions?
Another thought- When I go to my gmail app to compose an email, I have the following to send:
to:
cc:
subject:
But there is not a paperclip to click to attach any documents either. Is this all connected and something in my ipad settings needs to be adjusted?

You can only attach one file at a time to email in the Pages app
You cannot attach files in the mail app. If you want to email a file, you do it from within the app where the file is saved such as what you did with Pages.

I am unable to print multiple copies on 1 page

I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

Hi,
In order to print multiple documents on one page, you may follow the steps mentioned below:-
Press Command+p- Select multiple pages or booklet
If you are not getting these options, please send us a screenshot to better understand the issue.
Regards,
Nakul

Animated gif and page refresh problem

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

Passing multiple values to another page via a sql report

Having trouble passing multiple values to another page via a popup SQL report
I have two fields one called "descr" and another called "Met"
when I use the code below all works fine and the value of "descr" is passed
Select '<a href="javascript:popUp2('''
|| 'f?p=&APP_ID.:950:&SESSION.::&DEBUG.::'
|| 'P950_TYPE:'
|| descr
|| ''', 790, 460);"style="color:darkred; font-weight: bold;font-size: 90%">'
|| descr
|| '</a>' "Note"
But when I want to pass another value, all goes bonkers and instead of the value of the field being passed the literal text is passed.
can someone look at my code below and see what may be wrong
Select '<a href="javascript:popUp2('''
|| 'f?p=&APP_ID.:950:&SESSION.::&DEBUG.::'
|| 'P950_TYPE,P950_CODE:'
|| descr, Met
|| ''', 790, 460);"style="color:darkred; font-weight: bold;font-size: 90%">'
|| descr
|| '</a>' "Note"
I appeciate your help looking into this
FYI (Here is the entire SQL for reference)
With t
as
(SELECT
CASE WHEN KEY = 2 then
CASE WHEN WCS_CPT > :P940_METRIC_1_WCS_CPT1 then
'<span style="color:Red; ">'||TO_CHAR(WCS_CPT,'FML999G999G999G999G990D00')||'</span>' else
'<span style="color:#399304; ">'||TO_CHAR(WCS_CPT,'FML999G999G999G999G990D00')||'</span>' end
else '<span style="color:#180c8b;">'||TO_CHAR(WCS_CPT,'FML999G999G999G999G990D00')||'</span>' end "WCSCPT",
CASE WHEN KEY = 2 then
CASE WHEN WCS_TOI_PER_FTE < :P940_METRIC_2_WCS_TOI_PER_FTE then
'<span style="color:Red; ">'||TO_CHAR(WCS_TOI_PER_FTE,'999G999G999G999G990')||'</span>' else
'<span style="color:#399304; ">'||TO_CHAR(WCS_TOI_PER_FTE,'999G999G999G999G990')||'</span>' end
else '<span style="color:#180c8b;">'||TO_CHAR(WCS_TOI_PER_FTE,'999G999G999G999G990')||'</span>' end "WCSTOIPERFTE",
CASE WHEN KEY = 2 then
CASE WHEN WCS_SIO_PER_FTE < :P940_METRIC_3_WCS_SIO_PER_FTE then
'<span style="color:Red; ">'||TO_CHAR(WCS_SIO_PER_FTE,'999G999G999G999G990')||'</span>' else
'<span style="color:#399304; ">'||TO_CHAR(WCS_SIO_PER_FTE,'999G999G999G999G990')||'</span>' end
else '<span style="color:#180c8b;">'||TO_CHAR(WCS_SIO_PER_FTE,'999G999G999G999G990')||'</span>' end "WCSSIOPERFTE",
CASE WHEN KEY = 2 then
CASE WHEN WCS_TC_PER_FTE < :P940_METRIC_4_WCS_TC_PER_FTE then
'<span style="color:Red; ">'||TO_CHAR(WCS_TC_PER_FTE,'999G999G999G999G990')||'</span>' else
'<span style="color:#399304; ">'||TO_CHAR(WCS_TC_PER_FTE,'999G999G999G999G990')||'</span>' end
else '<span style="color:#180c8b;">'||TO_CHAR(WCS_TC_PER_FTE,'999G999G999G999G990')||'</span>' end "WCSTCPERFTE",
CASE WHEN KEY = 2 then
CASE WHEN WCS_ADSL_PER_FTE < :P940_METRIC_5_WCS_DSL_PER_FTE then
'<span style="color:Red; ">'||TO_CHAR(WCS_ADSL_PER_FTE,'999G999G999G999G990')||'</span>' else
'<span style="color:#399304; ">'||TO_CHAR(WCS_ADSL_PER_FTE,'999G999G999G999G990')||'</span>' end
else '<span style="color:#180c8b;">'||TO_CHAR(WCS_ADSL_PER_FTE,'999G999G999G999G990')||'</span>' end "WCSADSLPERFTE",
CASE WHEN KEY = 2 THEN
TO_CHAR(MONTH,'MON-YY')
else
'METRICS'
end "MONTH"
FROM (
SELECT DISTINCT
ROW_NUMBER() OVER (ORDER BY KEY DESC) AS ROW_NUM, KEY, WCS_CPT, WCS_TOI_PER_FTE, WCS_SIO_PER_FTE, WCS_TC_PER_FTE, WCS_ADSL_PER_FTE, MONTH
from TW_M_KEYMETRICS
WHERE TO_DATE(UPPER(MONTH),'DD/MON/YY') >= TO_DATE(UPPER(:P940_START_OF_THIS_FIN_YEAR),'DD/MON/YY')
ORDER BY KEY ASC, ROW_NUM, MONTH)
WHERE ROW_NUM <= :P940_MONTHS_SINCE_FIN_START)
Select '<a href="javascript:popUp2('''
|| 'f?p=&APP_ID.:950:&SESSION.::&DEBUG.::'
|| 'P950_METRIC_TYPE,P950_METRIC_VALUE:descr,MET'
|| ''
|| ''', 790, 460);"style="color:darkred; font-weight: bold;font-size: 90%">'
|| descr
|| '</a>' "Note"
, max(Met) METRICS, max(Jul) Jul08, max(Aug) Aug08, max(Sep) Sep08, max(Oct) Oct08, max(Nov) Nov08, max(Dec)Dec08, max(Jan) Jan08, max(Feb) Feb08, max(Mar) Mar08, max(Apr) Apr08, max(May) May08, max(Jun) Jun08
from (
Select 'Cost Per Transaction' descr,
decode (MONTH, 'METRICS', WCSCPT) MET,
decode (MONTH, 'JUL-08', WCSCPT) Jul,
decode (MONTH, 'AUG-08', WCSCPT) Aug,
decode (MONTH, 'SEP-08', WCSCPT) Sep,
decode (MONTH, 'OCT-08', WCSCPT) Oct,
decode (MONTH, 'NOV-08', WCSCPT) Nov,
decode (MONTH, 'DEC-08', WCSCPT) Dec,
decode (MONTH, 'JAN-08', WCSCPT) Jan,
decode (MONTH, 'FEB-08', WCSCPT) Feb,
decode (MONTH, 'MAR-08', WCSCPT) Mar,
decode (MONTH, 'APR-08', WCSCPT) Apr,
decode (MONTH, 'MAY-08', WCSCPT) May,
decode (MONTH, 'JUN-08', WCSCPT) Jun
from t
union all
Select 'Total Orders Issued Per FTE' descr,
decode (MONTH, 'METRICS', WCSTOIPERFTE) MET,
decode (MONTH, 'JUL-08', WCSTOIPERFTE) Jul,
decode (MONTH, 'AUG-08', WCSTOIPERFTE) Aug,
decode (MONTH, 'SEP-08', WCSTOIPERFTE) Sep,
decode (MONTH, 'OCT-08', WCSTOIPERFTE) Oct,
decode (MONTH, 'NOV-08', WCSTOIPERFTE) Nov,
decode (MONTH, 'DEC-08', WCSTOIPERFTE) Dec,
decode (MONTH, 'JAN-08', WCSTOIPERFTE) Jan,
decode (MONTH, 'FEB-08', WCSTOIPERFTE) Feb,
decode (MONTH, 'MAR-08', WCSTOIPERFTE) Mar,
decode (MONTH, 'APR-08', WCSTOIPERFTE) Apr,
decode (MONTH, 'MAY-08', WCSTOIPERFTE) May,
decode (MONTH, 'JUN-08', WCSTOIPERFTE) Jun
from t
union all
Select 'SIOs Per Billing FTE' descr,
decode (MONTH, 'METRICS', WCSSIOPERFTE) MET,
decode (MONTH, 'JUL-08', WCSSIOPERFTE) Jul,
decode (MONTH, 'AUG-08', WCSSIOPERFTE) Aug,
decode (MONTH, 'SEP-08', WCSSIOPERFTE) Sep,
decode (MONTH, 'OCT-08', WCSSIOPERFTE) Oct,
decode (MONTH, 'NOV-08', WCSSIOPERFTE) Nov,
decode (MONTH, 'DEC-08', WCSSIOPERFTE) Dec,
decode (MONTH, 'JAN-08', WCSSIOPERFTE) Jan,
decode (MONTH, 'FEB-08', WCSSIOPERFTE) Feb,
decode (MONTH, 'MAR-08', WCSSIOPERFTE) Mar,
decode (MONTH, 'APR-08', WCSSIOPERFTE) Apr,
decode (MONTH, 'MAY-08', WCSSIOPERFTE) May,
decode (MONTH, 'JUN-08', WCSSIOPERFTE) Jun
from t
union all
Select 'Total Calls Answered per FTE' descr,
decode (MONTH, 'METRICS', WCSTCPERFTE) MET,
decode (MONTH, 'JUL-08', WCSTCPERFTE) Jul,
decode (MONTH, 'AUG-08', WCSTCPERFTE) Aug,
decode (MONTH, 'SEP-08', WCSTCPERFTE) Sep,
decode (MONTH, 'OCT-08', WCSTCPERFTE) Oct,
decode (MONTH, 'NOV-08', WCSTCPERFTE) Nov,
decode (MONTH, 'DEC-08', WCSTCPERFTE) Dec,
decode (MONTH, 'JAN-08', WCSTCPERFTE) Jan,
decode (MONTH, 'FEB-08', WCSTCPERFTE) Feb,
decode (MONTH, 'MAR-08', WCSTCPERFTE) Mar,
decode (MONTH, 'APR-08', WCSTCPERFTE) Apr,
decode (MONTH, 'MAY-08', WCSTCPERFTE) May,
decode (MONTH, 'JUN-08', WCSTCPERFTE) Jun
from t
union all
Select 'ADSL Orders per FTE' descr,
decode (MONTH, 'METRICS', WCSADSLPERFTE) MET,
decode (MONTH, 'JUL-08', WCSADSLPERFTE) Jul,
decode (MONTH, 'AUG-08', WCSADSLPERFTE) Aug,
decode (MONTH, 'SEP-08', WCSADSLPERFTE) Sep,
decode (MONTH, 'OCT-08', WCSADSLPERFTE) Oct,
decode (MONTH, 'NOV-08', WCSADSLPERFTE) Nov,
decode (MONTH, 'DEC-08', WCSADSLPERFTE) Dec,
decode (MONTH, 'JAN-08', WCSADSLPERFTE) Jan,
decode (MONTH, 'FEB-08', WCSADSLPERFTE) Feb,
decode (MONTH, 'MAR-08', WCSADSLPERFTE) Mar,
decode (MONTH, 'APR-08', WCSADSLPERFTE) Apr,
decode (MONTH, 'MAY-08', WCSADSLPERFTE) May,
decode (MONTH, 'JUN-08', WCSADSLPERFTE) Jun
from t
GROUP by descr
Frank

Borg Species 5618 wrote:
Having trouble passing multiple values to another page via a popup SQL report
But when I want to pass another value, all goes bonkers and instead of the value of the field being passed the literal text is passed.
can someone look at my code below and see what may be wrong
Select '<a href="javascript:popUp2('''
|| 'f?p=&APP_ID.:950:&SESSION.::&DEBUG.::'
|| 'P950_TYPE,P950_CODE:'
|| descr, Met
|| ''', 790, 460);"style="color:darkred; font-weight: bold;font-size: 90%">'
|| descr
|| '</a>' "Note"
Hi Frank,
You should close this parameters with single quotation. Try this -
Select '<a href="javascript:popUp2('''
|| 'f?p=&APP_ID.:950:&SESSION.::&DEBUG.::'
|| 'P950_TYPE,P950_CODE:'
*|| 'descr, Met'*
|| ''', 790, 460);"style="color:darkred; font-weight: bold;font-size: 90%">'
|| descr
|| '</a>' "Note"
Hope this helps.
Regards,
M Tajuddin
http://tajuddin.whitepagesbd.com

I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. Mac users can no longer read the page numbers but pc users can.

I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. As of about 2 weeks ago the mac users can no longer read the page numbers they get a font error message and see only -- where the page information should be. The pc users do not have this same problem. When I replace our regular font (URW Grotesk) with a system font (Verdana) everyone is able to read the page numbers. This is a new issues, I have been creating these documents in the same way for years without a problem. I have been on hold and on and off calls for the last two hours, I keep getting hung up on once I find someone in adobe support to talk to!

Hi KnoopL,
Are the Mac users using Preview to view the pdfs or Adobe Reader?
Regards,
Rave

Multiple animations on a page

Similar Messages

Maybe you are looking for