Multiple apps not working after iTunes 6 install

ITunes 6.0 and QuickTime 7.0.3 were installed by Automatic Software update. Since then multiple apps including Safari, Mail, and all Dashboard Clients. At first System Preferences was working but has since stopped. All seem to start up but stop after just a couple seconds with the message "The application XXX quit unexpectedly" I have run Disk Utilities Repair Disk Permissions and Repair Disk, from the hard drive and Install DVD. I can't find all the preference files (for Safari and Mail at least). What to do next?

I second this problem. Although I'm not sure what it relates to (if it's the download of iTunes 6.0, or something else), I too am experiencing problems with many different applications quitting unexpectedly. The problem was initially seen when I inserted a DVD to watch, and DVD Player quit. I thought that there might be some new software I could download (which there was... DVD player 4.6), so I downloaded the new software, but the installation application kept quitting. Also, "Software Update" quits unexpectedly, which I found when I tried up update to Mac OS X (10.4.2) from simple 10.4 using that application.
To Steven - sorry that I cannot offer any advice, but can only share with you in your question of What to do next.

Similar Messages

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • Many apps not working after upgrade

    I have a lot of apps not working after upgrade even apple's remote, splash id etc... Anyone else or is it just me?

    I had trouble with MPR, but since it's free, I just deleted it and reloaded it directly from the App store onto the phone. It had an upgrade, too, that must have clashed with the 2.2 upgrade. Once I did the download, it was fine.

  • IMessage not working after IOS7 install?

    iMessage not working after IOS7 install?

    Yep, it has issues. Word is that Apple is working on an update to fix it but no idea when it'll be rolled out.

  • TS1702 Certain apps will not work after ios6 install.

    Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • Camera App not working after update to iOS 7.1.1 on iPhone4

    Hi Guys,
    I have recently downloaded iOS7.1.1 ipsw from the apple website for the correct version of my iphone4 [GSM] and updated my phone.
    The camera app is now not responsing at all and i dont even see a picture in the camera app. I tried the update again and found that the problem is still evident.
    Please let me know if we share the same problem and also any solution if you come across.
    Regards,
    Sheikh M

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • Ipad camera app not working after update 7.1.1 and using skype on video call

    Hello,
    i updated my mini ipad to ios 7.1.1
    then i used skype for video call...
    It worked fine for a few minutes then the front camera stopped working
    Stopping skype and starting the camera app, i saw that the front camera was no more working...black screen
    instead rear camera was working...
    Then i tried to reset the device (pressing sleep and home button) and uninstalled skype
    Now front camera works more or less, but the camera app seems always almost freezed, i cant change easily the options,
    i cant record a video, only camera for snapshots is working...
    any suggestion?
    is it possible to uninstall the camera app and try to reinstall it?
    Thanks!

    Updating to iOS 7.1.2 doesnt solving problem at all, even my front camera also begin not working after I did that. Everything's OK when I using rear cam, but just freeze and blurred on screen while switched to the front cam. And have to resetting to go back to rear cam. My iPhone4's camera itself, rear and front, are in good performance before. And I've tried anything such as reset, hard reset, restoring, setting up as new device, etc, without any result since then. If some people say it was about hardware issued, I thing so weird because too many same hardware problems coincident happened at the same moment. So I just only hope the Apple will listening and solving all problems wisely. Thanks b4.

  • Adobe reader not working after cs5 install

    adobe reader not working after cs5 install

    Nobody can tell you anything without proper system info or other technical details like exact version info.
    Mylenium

  • T mobile broadband stick not working after lion instal

    T mobile broadband USB stick not working after lion install

    No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

  • Snow leopard app store not working after clean install. Anyone else having this problem?

    The App store has stopped working after a clean install of OS X Snow Leopard. The get/install buttons go grey after I've clicked on them then nothing....
    It doesn't hang, all the navigation buttons work fine, and I can log into iTunes fine. Just can't buy anything...

    Try resetting the App Store and Clearing Cookies.
    Reset       Learned from Old Toad

  • My Verizon app not working after iOS 7 update

    I have an iphone 4s.  After I upgraded to ios 7, the my verizon app stopped working.  Today, the app got an update in the app store to version 3.6.0.  I installed the update, but it still does not work.  When I run it, it spins the circle dots for a while and comes back with "Error: A communication error has occured [sic]. Please ensure Internet connection and try again."  And it has a "Reload App" button, which I press, and it does the same thing.  This happens whether I'm on wifi or 3g.  Several times I've tried rebooting the phone, deleting and reinstalling the my verizon app, but it still doesn't work.  Does anyone else have this problem?  How did you solve it?  Thanks.

    I did the network reset, but that didn't help.  FYI if you're thinking of resetting network settings, the only negative side-effect is that the phone forgets all of its wifi networks.
    I did a restore from backup via iTunes, and that didn't help either.
    I've had a couple other issues with iOS 7, and what I did was reset the firmware via iTunes but I didn't restore from backup.  Now My Verizon works.  The reason I did this drastic step was because my Safari was messed up in iOS 7 in another way, and restoring from backup didn't help that either, but I had a hunch that getting Safari fixed would fix My Verizon.  (I can't know for sure if I was right about that.)
    Here's the thing:  Apps like My Verizon that really just load web pages use Safari's settings for the web. So I would try this if I were still stuck with My Verizon not working: Go into Safari settings, and clear cookies and history and cache data, and make sure the "Block Cookies" setting is set to either "Never" or "From third parties and advertisers."  Then reboot your phone for good measure, and try My Verizon again.

  • Airplay from Windows7 PC to Apple-TV 2 does not work after iTunes Upgrade

    Hi,
    after the latest iTunes Upgrade 10.1.2.17, AirPlay discontinued to work!
    My Apple-TV shows up as speakers, but after choosing the A-TV I get a massage that it can not connect to remote speakers. Unknown error (-15000).
    I have rebooted the A-TV and PC multiple times. The AirPlay function works fine if done with iPhone 4!
    Pleas help! Thanks in advance!

    I forgot to say... Airparrot shows up in your system tray after you install. As long as you are on the same network as your Apple TV, just right click the Airparrot icon and select Apple TV as your Airplay device. Voila!
    http://airparrot.com
    Then hook up your wireless keyboard and mouse and plop on the couch for some supersized web browsing.

Maybe you are looking for