Multiple "Archiving" is accidentally changing direction on me. Anyone else?(Starts going DOWN sometimes)

I may need some help figuring out exactly what causes this - I'm pretty sure its random and a bug. In the last couple years that I have used Mail, I have developed a system where I keep my oldest most important mail that still needs to be processed (I keep my inbox as close to empty as possible) at the bottom of my inbox so my inbox looks something like this from top to bottom (Email 1, Email 2 , Email 3 , Email 4 , Email 5) since 4 and 5 are likely a few weeks older than the top 3 - I'll skip over them (intentionally leaving them in my inbox) and highlight Email 3. Let's say I want to archive Email 3. I press Archive and it dissapears from my inbox. The next thing Mail does is move on to the "next" message. In the past (and most of the time in Mountain Lion) Mail will highlight what WAS Email 2. So multiple presses of Archive will allow me to clean up the "middle" of my inbox from the bottom going UP.
Ever since Mountain Lion install (Mail 6.0) on the only 2 of my Macs that I have upgraded yet - Mail seems to sometimes go DOWN the list. Meaning that after Archiving Email 3, it moves on to what WAS Email 4, so a few multiple Archive clicks will effect clean out the Bottom of my email list instead of the middle.
I clean up large amounts of emails in a day and do this in a fast way. My brain from years of doing this - acts very fast and lately when I'm working in mail I find I get 4 emails in before i realize I've just gone in the wrong direction and Archived things I didn't want to. Luckily I can hit undo a few times, click off of the message in question, and then Mail reverses its "direction" and fixes things.
I'm not sure its something I'm doing - but I figure it would help if another one of you can confirm this is happening to them also.
Thanks.

oh and for the record "I keep my oldest and still important emails at the bottom" means that my mail is sorted in date order and I don't archive things I'm not done with yet.

Similar Messages

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

HT4528 i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

i am having problems since downloading ios8. app freezing, display orientation locking up, calls coming into multiple phones associated with same apple id. Anyone else having these issues? i did not download the update

No. But thank for asking.

Contacts close and changes are lost. Anyone else?

When editing an existing contact, after making a change to the details for a contact (editing an existing phone, adding a new phone or email), if you scroll down such that the "Delete Contact" button is shown THEN press the "Done" button, the contacts application will close and all changes will be lost.
Has anyone else noticed this behaviour?
G

Thanks for that but it’s Windows and I have a mac, however, I can follow it a bit might get a result with it. Thnks
Bill Towers
[email protected]
(='.'=)
For our future, please consider the environment before printing this.
This communication and any attachments are confidential and may contain privileged information or copyright material. Any unauthorised use, copying, review or disclosure is prohibited. If you are not the intended recipient, please contact us immediately and delete this message.

How to change direction of a spreadsheet to start from the right side?

default spreadsheet direction on numbers is left to right. would it be possiable to change it into right to left direction instead?

Mbahaie wrote:
I am not interested in installing MS products on my MacBook!!!
MS products for Mac do not do what you want. OpenOffice is NOT an MS product. Try it.
To ask for new features from Apple, you can go to
http://www.apple.com/feedback

MULTIPLE ARCHIVER PROCESSES FAQ ( ORACLE 8I NEW FEATURE )

제품 : ORACLE SERVER
작성날짜 : 2002-04-19
MULTIPLE ARCHIVER PROCESSES FAQ ( ORACLE 8I NEW FEATURE )
=========================================================
PURPOSE
1. LOG_ARCHIVE_MAX_PROCESSES가 하는 역할
2. LOG_ARCHIVE_MAX_PROCESSES 값은 동적으로 변경 가능한지 여부
3. Archiver process의 갯수가 동적으로 바뀌는 메카니즘
4. 어떤 archiver process가 online log를 archive시켰는지 판단 방법
Explanation
1. LOG_ARCHIVE_MAX_PROCESSES가 하는 역할
Oracle 8i에는 다중 archive destination을 지원하며, 단일 archiver의
부하를 줄여주기 위해 multiple archiver process를 사용할 수 있다.
LOG_ARCHIVE_MAX_PROCESSES 파라미터로 구동시킬 최대 ARCH 프로세스의
갯수를 지정하면 된다.
만약 LOG_ARCHIVE_START 값이 TRUE로 지정되어 있다면 인스턴스 구동시
init 파일에 지정된 LOG_ARCHIVE_MAX_PROCESSES에 지정된 값을 읽어
들인다. 만약 LOG_ARCHIVE_START 값이 true인데 LOG_ARCHIVE_MAX_PROCESSES
값이 별도로 지정되어 있지 않을 경우에는 arc0 프로세스만을 구동시킨다.
LOG_ARCHIVE_MAX_PROCESSES 값이 별도로 지정되었을 경우 (1 - 10 범위),
arc0, arc1 과 같은 추가 프로세스를 구동시킨다.
하지만, 이 파라미터 값을 기본값 1이 아닌 다른 값으로 명시적으로 지정할
필요는 없다. 왜냐하면, 시스템에서 몇개의 ARCn 프로세스가
필요한지를 판단하여, 추가 ARCn 프로세스를 생성하기 때문이다.
2. LOG_ARCHIVE_MAX_PROCESSES 값은 동적으로 변경 가능한지 여부
alter system 명령에서 set LOG_ARCHIVE_MAX_PROCESSES=n 으로
지정하여 동적으로 값을 변경할 수 있다. 이때 n은 1 부터 10사이의
값이어야 한다. 하지만, LOG_ARCHIVE_START 값이 FALSE로 지정되어
있을 경우에는, 명령을 실행시켜도 아무런 영향을 미치지
못한다.
3. Archiver process의 갯수가 동적으로 바뀌는 메카니즘
만약 LOG_ARCHIVE_START 값이 TRUE로 지정되어 있다면, 오라클에서는
구동시 하나의 archiver process (ARC0)를 구동시킨다. 이 파라미터
값은 필요시 LATER SYSTEM 명령으로 지정된 갯수만큼의
archive process를 구동시킬 수 있다.
예)
SVRMGRL>alter system set LOG_ARCHIVE_MAX_PROCESSES=4;
위 명령을 실행 시키면 다음과 같은 절차에 따라 ARC1, ARC2, ARC3를
추가한다.
1) Shadow process는 primary archive process에게 프로세스 갯수를
늘릴 것을 요청한다.
2) Archiver process는 kcrrschd 함수를 호출한다. (kcrrschd:
다중 arch process를 schedule)
3) 만약 요청된 process의 갯수가 현재 사용중인 archiver process
갯수보다 작은지 확인한다. 만약 새로 지정된 값이 적거나, ARCHIVING이
DISABLE 된 상태라면 다른 조치를 취하지 않고 return 한다. 그렇지
않다면 지원되는 최대 갯수인 10을 넘는지 확인하고 10을 넘을 경우에는
프로세스의 갯수를 10으로 지정한다.
4) Scheduler 함수는 kcrxs{} structure에 대한 latch를 확보한다.
여기서 kcrxs{} structure는 ARCH Activation status를 나타낸다.
5) Scheduler 함수는 지정된 process 갯수 만큼 loop를 돌면서
schedule된 상태를 structure KCRRSCHED에 반영시킨다.
6) 그리고 나서 latch를 release 시킨 후 kcrrsmp 함수를 ( kcrrsmp:
다중 arch processs 구동 ) 호출한다.
7) kcrrsmp 함수는 kcrrxs{} structure (ARCH 구동 상태)에 대한 latch를
확보하여 code 실행을 serialize 시켜 이 함수가 동시에 실행되더라도
한번에 하나씩 실행될 수 있도록 한다.
8) pending 상태에 있는 archiver process를 스케쥴링 하고, dead process가
있으면 clean up 시킨다.
9) 그리고 나서 이 함수는 지정된 process 갯수 만큼 loop를 돌면서
KCRRSCHED 상태를 KCRRSTART으로 바꾸어, archiver process들을
구동 준비 상태로 만든다.
10) latch를 release 시킨 후 ARCH 프로세스를 구동시킨다.
11) kcrrsmp함수는 latch를 다시 획득한다. 각각의 archiver 프로세스는
자기 자신을 activate 시킬 것을 통보 받는다. archiver process는
자기 자신을 activate 시킨 후 alert file에 관련 사항을 기록한다.
12) 호출을 하는 함수는 모든 archiver process가 자기 자신을
activate 시키고, kcrrxs structure의 내용을 갱신할 때 까지
sleep 상태에서 대기한다.
13) 끝으로, 현재 archiver process의 갯수가 요청된 archiver process
의 갯수와 일치 하면, latch를 release 시키고 break 한다. ( C
에서의 break )
alert. log 에는 위 과정이 다음과 같이 반영된다.
sql: prodding the archiver
ALTER SYSTEM SET log_archive_max_processes=4;
Tue Jul 13 02:15:14 1999
ARC0: changing ARC1 KCRRNOARCH->KCRRSCHED
ARC0: changing ARC2 KCRRNOARCH->KCRRSCHED
ARC0: changing ARC3 KCRRNOARCH->KCRRSCHED
ARC0: STARTING ARCH PROCESSES
ARC0: changing ARC1 KCRRSCHED->KCRRSTART
ARC0: changing ARC2 KCRRSCHED->KCRRSTART
ARC0: changing ARC3 KCRRSCHED->KCRRSTART
ARC0: invoking ARC1
Tue Jul 13 02:15:15 1999
ARC1: changing ARC1 KCRRSTART->KCRRACTIVE
Tue Jul 13 02:15:15 1999
ARC0: Initializing ARC1
ARC0: ARC1 invoked
ARC0: invoking ARC2
ARC1 started with pid=10
ARC1: Archival started
Tue Jul 13 02:15:15 1999
ARC2: changing ARC2 KCRRSTART->KCRRACTIVE
Tue Jul 13 02:15:15 1999
ARC0: Initializing ARC2
ARC2 와 ARC3도 동일한 절차를 따른다.
흥미로운 사실은 프로세스의 갯수를 줄일 수도 있다는 것이다. 예를 들어
다음과 같은 명령을 실행시킬 경우
SVRMGRL>alter system set LOG_ARCHIVE_MAX_PROCESSES=2;
다음과 같은 작업이 순서대로 실행된다.
1) shadow process는 현재 active 상태인 archiver process와 접속을 한다.
2) archiverprocess는 kcrrxmp 함수를 호출한다. ( kcrrxmp: 다중
Arch process 정지 )
3) kcrrxmp 함수는 kcrrxs{} structure에 (ARCH 구동 상태) 대한 latch를 획득하여 다른 프로세스에서 structure를 동시에 병경하지 않도록 한다.
4) 새로 요청된 archiver process의 갯수가 현재 사용중인 archiver process
의 갯수보다 작은지 확인한다.
5) 만약 작다면, archiver process 목록 가운데, 가장 최근에 schedule
되어, archival 작업에 schedule 차례가 금방 돌아 오지 않을 프로세스를
찾아낸다.
6) 각각의 프로세스에 대해 KCRRACTIVE 상태에서 KCRRSHUTDN로 상태를
변경할 것을 요청한다.
7) 상태가 바뀌면, OS에서 해당 프로세스를 종료시키도록 하고, 상태를
KCRRDEAD로 바꾼다. 관련된 상태 정보가 정리되고 kcrrxs{} structure의
내용이 갱신된다.
6) ,7) 과정은 지정된 archiver process 갯수로 줄어들 때 까지
반복된다.
8) 새로운 archiver process의 갯수로 kcrrxs structure 내용이 갱신된다.
9) latch를 release 시킨다.
상태 변동은 다음과 같이 alert. log 파일에 반영된다.
sql: prodding the archiver
Tue Jul 13 00:34:20 1999
ARC3: changing ARC0 KCRRACTIVE->KCRRSHUTDN
ARC3: sending ARC0 shutdown message
ARC3: changing ARC1 KCRRACTIVE->KCRRSHUTDN
ARC3: sending ARC1 shutdown message
ARC3: received prod
Tue Jul 13 00:34:20 1999
ALTER SYSTEM SET log_archive_max_processes=2;
Tue Jul 13 00:34:20 1999
ARCH shutting down
ARC0: Archival stopped
ARC0: changing ARC0 KCRRSHUTDN->KCRRDEAD
Tue Jul 13 00:34:20 1999
ARCH shutting down
ARC1: Archival stopped
ARC1: changing ARC1 KCRRSHUTDN->KCRRDEAD
4. 어떤 archiver process가 online log를 archive시켰는지 판단 방법
Archiver process는 round-robin 방식으로 archiving 작업을 수행하도록
schedule 된다. 만약 다중 archiver process가 부하에 따라 activate 된
경우는 여러가지 경우의 수가 있을 수 있다. Oracle 8i에서는 다중
archive log dest를 지원하면서 archive log에 대한 duplexing을 지원
하기 때문에, 어떤프로세스가 log file을 archive 시켰는지를 기록할 필요가
있다.
Oracle 8i에서 archival 작업은 성공할 때 마다 trace file에 archiver
process 명을 기록한다.
다음은 관련 trace file의 주요 내용이다.
Instance name: v815
Redo thread mounted by this instance: 1
Oracle process number: 12
Unix process pid: 3658, image: oracle@oracle8i (ARC3)
*** Session ID:(12. 1) 1999. 07. 13. 02. 15. 15. 000
*** 1999. 07. 13. 02. 15. 15. 000
*** 1999. 07. 13. 02. 33. 06. 000
ARC3: Begin archiving log# 1 seq# 38 thrd# 1
ARC3: VALIDATE
ARC3: PREPARE
ARC3: INITIALIZE
ARC3: SPOOL
ARC3: Creating archive destination 1 : '/bigdisk/oracle8i/dbs/arch/1_38.
dbf'
ARC3: Archiving block 1 count 1 to : '/bigdisk/oracle8i/dbs/arch/1_38.
dbf'
ARC3: Closing archive destination 1 : /bigdisk/oracle8i/dbs/arch/1_38.
dbf
ARC3: FINISH
ARC3: Archival success destination 1 : '/bigdisk/oracle8i/dbs/arch/1_38.
dbf'
ARC3: COMPLETE, all destinations archived
ARC3: ArchivedLog entry added: /bigdisk/oracle8i/dbs/arch/1_38. dbf
ARC3: ARCHIVED
*** 1999. 07. 13. 02. 33. 06. 000
ARC3: Completed archiving log# 1 seq# 38 thrd# 1
이 정보를 가지고, archive process 3이 log sequence 38번을
destination 1 :/bigdisk/oracle8i/dbs/arch 에 archive 시킨 것을 알 수 있다.
Reference Ducumment
<Note:73163.1>

제품 : ORACLE SERVER
작성날짜 : 2002-04-19
MULTIPLE ARCHIVER PROCESSES FAQ ( ORACLE 8I NEW FEATURE )
=========================================================
PURPOSE
1. LOG_ARCHIVE_MAX_PROCESSES가 하는 역할
2. LOG_ARCHIVE_MAX_PROCESSES 값은 동적으로 변경 가능한지 여부
3. Archiver process의 갯수가 동적으로 바뀌는 메카니즘
4. 어떤 archiver process가 online log를 archive시켰는지 판단 방법
Explanation
1. LOG_ARCHIVE_MAX_PROCESSES가 하는 역할
Oracle 8i에는 다중 archive destination을 지원하며, 단일 archiver의
부하를 줄여주기 위해 multiple archiver process를 사용할 수 있다.
LOG_ARCHIVE_MAX_PROCESSES 파라미터로 구동시킬 최대 ARCH 프로세스의
갯수를 지정하면 된다.
만약 LOG_ARCHIVE_START 값이 TRUE로 지정되어 있다면 인스턴스 구동시
init 파일에 지정된 LOG_ARCHIVE_MAX_PROCESSES에 지정된 값을 읽어
들인다. 만약 LOG_ARCHIVE_START 값이 true인데 LOG_ARCHIVE_MAX_PROCESSES
값이 별도로 지정되어 있지 않을 경우에는 arc0 프로세스만을 구동시킨다.
LOG_ARCHIVE_MAX_PROCESSES 값이 별도로 지정되었을 경우 (1 - 10 범위),
arc0, arc1 과 같은 추가 프로세스를 구동시킨다.
하지만, 이 파라미터 값을 기본값 1이 아닌 다른 값으로 명시적으로 지정할
필요는 없다. 왜냐하면, 시스템에서 몇개의 ARCn 프로세스가
필요한지를 판단하여, 추가 ARCn 프로세스를 생성하기 때문이다.
2. LOG_ARCHIVE_MAX_PROCESSES 값은 동적으로 변경 가능한지 여부
alter system 명령에서 set LOG_ARCHIVE_MAX_PROCESSES=n 으로
지정하여 동적으로 값을 변경할 수 있다. 이때 n은 1 부터 10사이의
값이어야 한다. 하지만, LOG_ARCHIVE_START 값이 FALSE로 지정되어
있을 경우에는, 명령을 실행시켜도 아무런 영향을 미치지
못한다.
3. Archiver process의 갯수가 동적으로 바뀌는 메카니즘
만약 LOG_ARCHIVE_START 값이 TRUE로 지정되어 있다면, 오라클에서는
구동시 하나의 archiver process (ARC0)를 구동시킨다. 이 파라미터
값은 필요시 LATER SYSTEM 명령으로 지정된 갯수만큼의
archive process를 구동시킬 수 있다.
예)
SVRMGRL>alter system set LOG_ARCHIVE_MAX_PROCESSES=4;
위 명령을 실행 시키면 다음과 같은 절차에 따라 ARC1, ARC2, ARC3를
추가한다.
1) Shadow process는 primary archive process에게 프로세스 갯수를
늘릴 것을 요청한다.
2) Archiver process는 kcrrschd 함수를 호출한다. (kcrrschd:
다중 arch process를 schedule)
3) 만약 요청된 process의 갯수가 현재 사용중인 archiver process
갯수보다 작은지 확인한다. 만약 새로 지정된 값이 적거나, ARCHIVING이
DISABLE 된 상태라면 다른 조치를 취하지 않고 return 한다. 그렇지
않다면 지원되는 최대 갯수인 10을 넘는지 확인하고 10을 넘을 경우에는
프로세스의 갯수를 10으로 지정한다.
4) Scheduler 함수는 kcrxs{} structure에 대한 latch를 확보한다.
여기서 kcrxs{} structure는 ARCH Activation status를 나타낸다.
5) Scheduler 함수는 지정된 process 갯수 만큼 loop를 돌면서
schedule된 상태를 structure KCRRSCHED에 반영시킨다.
6) 그리고 나서 latch를 release 시킨 후 kcrrsmp 함수를 ( kcrrsmp:
다중 arch processs 구동 ) 호출한다.
7) kcrrsmp 함수는 kcrrxs{} structure (ARCH 구동 상태)에 대한 latch를
확보하여 code 실행을 serialize 시켜 이 함수가 동시에 실행되더라도
한번에 하나씩 실행될 수 있도록 한다.
8) pending 상태에 있는 archiver process를 스케쥴링 하고, dead process가
있으면 clean up 시킨다.
9) 그리고 나서 이 함수는 지정된 process 갯수 만큼 loop를 돌면서
KCRRSCHED 상태를 KCRRSTART으로 바꾸어, archiver process들을
구동 준비 상태로 만든다.
10) latch를 release 시킨 후 ARCH 프로세스를 구동시킨다.
11) kcrrsmp함수는 latch를 다시 획득한다. 각각의 archiver 프로세스는
자기 자신을 activate 시킬 것을 통보 받는다. archiver process는
자기 자신을 activate 시킨 후 alert file에 관련 사항을 기록한다.
12) 호출을 하는 함수는 모든 archiver process가 자기 자신을
activate 시키고, kcrrxs structure의 내용을 갱신할 때 까지
sleep 상태에서 대기한다.
13) 끝으로, 현재 archiver process의 갯수가 요청된 archiver process
의 갯수와 일치 하면, latch를 release 시키고 break 한다. ( C
에서의 break )
alert. log 에는 위 과정이 다음과 같이 반영된다.
sql: prodding the archiver
ALTER SYSTEM SET log_archive_max_processes=4;
Tue Jul 13 02:15:14 1999
ARC0: changing ARC1 KCRRNOARCH->KCRRSCHED
ARC0: changing ARC2 KCRRNOARCH->KCRRSCHED
ARC0: changing ARC3 KCRRNOARCH->KCRRSCHED
ARC0: STARTING ARCH PROCESSES
ARC0: changing ARC1 KCRRSCHED->KCRRSTART
ARC0: changing ARC2 KCRRSCHED->KCRRSTART
ARC0: changing ARC3 KCRRSCHED->KCRRSTART
ARC0: invoking ARC1
Tue Jul 13 02:15:15 1999
ARC1: changing ARC1 KCRRSTART->KCRRACTIVE
Tue Jul 13 02:15:15 1999
ARC0: Initializing ARC1
ARC0: ARC1 invoked
ARC0: invoking ARC2
ARC1 started with pid=10
ARC1: Archival started
Tue Jul 13 02:15:15 1999
ARC2: changing ARC2 KCRRSTART->KCRRACTIVE
Tue Jul 13 02:15:15 1999
ARC0: Initializing ARC2
ARC2 와 ARC3도 동일한 절차를 따른다.
흥미로운 사실은 프로세스의 갯수를 줄일 수도 있다는 것이다. 예를 들어
다음과 같은 명령을 실행시킬 경우
SVRMGRL>alter system set LOG_ARCHIVE_MAX_PROCESSES=2;
다음과 같은 작업이 순서대로 실행된다.
1) shadow process는 현재 active 상태인 archiver process와 접속을 한다.
2) archiverprocess는 kcrrxmp 함수를 호출한다. ( kcrrxmp: 다중
Arch process 정지 )
3) kcrrxmp 함수는 kcrrxs{} structure에 (ARCH 구동 상태) 대한 latch를 획득하여 다른 프로세스에서 structure를 동시에 병경하지 않도록 한다.
4) 새로 요청된 archiver process의 갯수가 현재 사용중인 archiver process
의 갯수보다 작은지 확인한다.
5) 만약 작다면, archiver process 목록 가운데, 가장 최근에 schedule
되어, archival 작업에 schedule 차례가 금방 돌아 오지 않을 프로세스를
찾아낸다.
6) 각각의 프로세스에 대해 KCRRACTIVE 상태에서 KCRRSHUTDN로 상태를
변경할 것을 요청한다.
7) 상태가 바뀌면, OS에서 해당 프로세스를 종료시키도록 하고, 상태를
KCRRDEAD로 바꾼다. 관련된 상태 정보가 정리되고 kcrrxs{} structure의
내용이 갱신된다.
6) ,7) 과정은 지정된 archiver process 갯수로 줄어들 때 까지
반복된다.
8) 새로운 archiver process의 갯수로 kcrrxs structure 내용이 갱신된다.
9) latch를 release 시킨다.
상태 변동은 다음과 같이 alert. log 파일에 반영된다.
sql: prodding the archiver
Tue Jul 13 00:34:20 1999
ARC3: changing ARC0 KCRRACTIVE->KCRRSHUTDN
ARC3: sending ARC0 shutdown message
ARC3: changing ARC1 KCRRACTIVE->KCRRSHUTDN
ARC3: sending ARC1 shutdown message
ARC3: received prod
Tue Jul 13 00:34:20 1999
ALTER SYSTEM SET log_archive_max_processes=2;
Tue Jul 13 00:34:20 1999
ARCH shutting down
ARC0: Archival stopped
ARC0: changing ARC0 KCRRSHUTDN->KCRRDEAD
Tue Jul 13 00:34:20 1999
ARCH shutting down
ARC1: Archival stopped
ARC1: changing ARC1 KCRRSHUTDN->KCRRDEAD
4. 어떤 archiver process가 online log를 archive시켰는지 판단 방법
Archiver process는 round-robin 방식으로 archiving 작업을 수행하도록
schedule 된다. 만약 다중 archiver process가 부하에 따라 activate 된
경우는 여러가지 경우의 수가 있을 수 있다. Oracle 8i에서는 다중
archive log dest를 지원하면서 archive log에 대한 duplexing을 지원
하기 때문에, 어떤프로세스가 log file을 archive 시켰는지를 기록할 필요가
있다.
Oracle 8i에서 archival 작업은 성공할 때 마다 trace file에 archiver
process 명을 기록한다.
다음은 관련 trace file의 주요 내용이다.
Instance name: v815
Redo thread mounted by this instance: 1
Oracle process number: 12
Unix process pid: 3658, image: oracle@oracle8i (ARC3)
*** Session ID:(12. 1) 1999. 07. 13. 02. 15. 15. 000
*** 1999. 07. 13. 02. 15. 15. 000
*** 1999. 07. 13. 02. 33. 06. 000
ARC3: Begin archiving log# 1 seq# 38 thrd# 1
ARC3: VALIDATE
ARC3: PREPARE
ARC3: INITIALIZE
ARC3: SPOOL
ARC3: Creating archive destination 1 : '/bigdisk/oracle8i/dbs/arch/1_38.
dbf'
ARC3: Archiving block 1 count 1 to : '/bigdisk/oracle8i/dbs/arch/1_38.
dbf'
ARC3: Closing archive destination 1 : /bigdisk/oracle8i/dbs/arch/1_38.
dbf
ARC3: FINISH
ARC3: Archival success destination 1 : '/bigdisk/oracle8i/dbs/arch/1_38.
dbf'
ARC3: COMPLETE, all destinations archived
ARC3: ArchivedLog entry added: /bigdisk/oracle8i/dbs/arch/1_38. dbf
ARC3: ARCHIVED
*** 1999. 07. 13. 02. 33. 06. 000
ARC3: Completed archiving log# 1 seq# 38 thrd# 1
이 정보를 가지고, archive process 3이 log sequence 38번을
destination 1 :/bigdisk/oracle8i/dbs/arch 에 archive 시킨 것을 알 수 있다.
Reference Ducumment
<Note:73163.1>

How to change direction of flame effect?

I want to animate a rocket ship in my presentation so that it launches out of the top of the slide. I thought that I could use the flame effect on an object combined with a move but I don't see any way I can change the direction of the flame so that it is going down. I know I could do this with video or something but just wondered if there is a way to change the direction of the flame effect.
Thanks!

bump
I thought perhaps of having the rocket fly downward, record as movie, then paste it back in, that all works except— I can't seem to figure how to have the rocket move (action) and the flame (transition) happen simultaneously.
In Adobe After Effects I could see doing this, just not sure here, will keep experimenting.
Would be a nice option to combine multiple actions to run simultaneously.

Rules applied to multiple cells trigger color changes when any of the cells

"Rules applied to multiple cells trigger color changes when any of the cells meet the rule’s condition." That's what Help says, but when I follow the directions, it doesn't work. This is in Numbers 08.
I have a table where the contents of one column are either "YES" or "NO", depending on formulas using variables from other cells. If YES, I want the fill of that cell and that of two adjacent cells to change from white to green. I select all three cells and use conditional format rules for "text contains:" YES, then choose my fill color. When I return to the table and introduce values for the variables that trigger the rule, only the cell in the YES/NO column changes to green; the other two remain white.
While I am spreadsheet challenged, I usually can follow directions as plain as those in Help, but it's not working. I couldn't find anything in the discussions after an hour of searching. Is this a known problem or am I just stupid?

For what it's worth, that's the way I read that line in the User Guide as well. What it actually appears to mean, though is 'Rules applied to multiple cells apply independently to each of the cells."
Here's a workaround for your three adjacent columns. Long, but fairly simple steps.
Add a second table to the sheet (Table 2).
Resize the second table to one column wide and as many rows as you want to apply the conditional format to.
Set the width of the column to the same width as the three columns you want to highlight, and the row height(s) to match the rows.
Format to table to have NO Header or Footer row or column.
Use the Wrap Inspector to uncheck "Object causes wrap"
In the first top cell of Table 2, enter an = sign, then Click on Table 1 in the sidebar, Click on the first cell that will hold YES or NO.
Fill the formula down the rest of Table 2.
With all cells in Table 2 selected, use the Cell Format inspector to set the 'text contains yes' rule and the conditional fill colour for these cells.
Test the conditional formating by introducing values into Table 1.
Click on Table 1 in the sidebar, then use the Table inspector to set Cell Fill to 'none'.
Click on Table 2 in the sidebar, then drag that table onto table 1 aligning it to cover the cells in which the conditional formating is to appear.
When positioned (and still selected), go to the Arrange menu and Send Backward to move Table 2 behind the (transparent) cells in Table 1.
With Table 2 still selected, click on the Cell Borders color well and set the Opacity of the borders to 0%.
Click the Text inspector and set the Text colour Opacity for Table 2 to 0%.
Regards,
Barry

The crystal screen of my ipad mini broke after I accidentally droped it. Does anyone know if it can be fixed directly with Apple? How much will it cost to get it fixed/replaced?

The crystal screen of my ipad mini broke after I accidentally droped it. Does anyone know if it can be fixed directly with Apple? How much will it cost to get it fixed/replaced?

"Abuse" includes dropping it. If it's not a manufacturing fault: These prices are roughly the same in other coutries to the US.
Out-of-Warranty Service     If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
     A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
          Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPad is eligible for Out-of-Warranty service. Replacement iPads have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see the AppleCare+ for iPad and Apple Repair Terms And Conditions for further details.

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one?

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?

If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
Or take it to a genius bar if you have one near?
Or further explain what setting you are needing fixed back and im sure someone here can help you for free!

My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...

My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...

ok turn it off manually and turn it back on while holding the apple logo bottor or the function botton this will give you an option to choose if you want to startup with osx ow windows. let me know if this works
<Email Edited By Host>

I accidentally changed network settings and now I can't connect to internet

(I posted this on the board for OS X 10.4, but I figured my OS is irrelevant to my problem, so I thought I'd post it here for a better chance of getting help)
I accidentally changed some network settings on one of the computers on my network, and now it wont connect to the internet. All the other computers on the network work fine. I guess I need help getting things back to how they were.
I have absolutely no experience with networks, so I don't have a clue what to do. One thing I notice that might be of help is that when it's set to "Configure: Using DHCP," the section for "Router:" is blank. No address. The router address on all the other computers is 192.168.1.1. Similarly, the IP address on all the computers is some variation of 192.168.1.x, but on the problem computer it's a completely random number (as far as I can tell).
Any help would be EXTREMELY appreciated.
Thanks!

Open Network preferences on the computer, select the connection method, click on the Advanced button. Click on the TCP/IP tab and set the Configure IPv4 drop down menu to DHCP. Click on the Apply button.
BTW, you need to post your questions in the appropriate forum which would have been the appropriate Tiger forum. This is the Snow Leopard forum.
Message was edited by: Kappy

How can I add drop shadow to a vehicle that changes direction ?

Hi,
Flash CS5
Is it possible to add drop shadow to plan views of vehicles (vehicles are png images as MovieClips) such that as the vehicles change direction along roads (also png images) the shadow is always cast to north west ot the vehicle ? Buildings in the base png image have shadows but vehicles also need them so as to belong to the scene and not appear false.
How is it done ?
Is there control over opacity and softness ?
If I were to have plan views of humans walking would the shadows follow the leg movements ?
Envirographics

you can control the dropshadow's angle property dynamically. and, yes the dropshadowfilter has an alpha and strength properties you can use.
use the help files to see all the properties you can use.

XSLT recursion changed direction from JDK1.4 to JDK1.5?

We make use of XSLT template recursion, and when we tried to test our code with JDK 1.5, the recursion "changed direction". I believe some sort of optimization is taking place that's inappropriately switching around the order or something.
Here's a test case:
test-data.xml:
<?xml version="1.0" encoding="utf-8"?>
<rating>3</rating>test-temp.xml:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet
    version="1.0"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html"/>
<xsl:template match="/">
<html>
<body>
<xsl:call-template name="showRating">
<xsl:with-param name="num" select="'1'"/>
</xsl:call-template>
</body>
</html>
</xsl:template>

<xsl:template name="showRating">
   <xsl:param name="num"/>
    <xsl:if test="$num <= rating">
    <img border="0" src="yellow_star.gif" valign="absmiddle"/>
    </xsl:if>
    <xsl:if test="$num > rating">
    <img border="0" src="white_star.gif" valign="absmiddle"/>
    </xsl:if>
<xsl:if test="$num <= '4'">
<xsl:text>
</xsl:text> 
<xsl:call-template name="showRating">
<xsl:with-param name="num" select="$num + 1" />
</xsl:call-template>
</xsl:if>
</xsl:template>
</xsl:stylesheet>testxslt.java:
import java.io.*;
import javax.xml.transform.*;
import javax.xml.transform.stream.*;
public class testxslt {
public static void main(String[] args) {
    try {
      new testxslt();
    catch(Throwable t) {
      System.err.println(t + ": " + t.getMessage());
      t.printStackTrace();
private testxslt() throws Exception {
    String stylesheet = readFile("test-temp.xml");
    String data = readFile("test-data.xml");
    String out = transform(stylesheet, data);
    System.out.println(out);
private String readFile(String filename) throws IOException {
    StringBuffer out = new StringBuffer();
    Reader r = new FileReader(filename);
    int count;
    char buf[] = new char[1024];
    while((count = r.read(buf)) > 0)
      out.append(buf, 0, count);
    r.close();
    return out.toString();
private String transform(String stylesheet, String data) throws Exception {
    ByteArrayOutputStream resultStream = new ByteArrayOutputStream();
    StreamResult transStreamResult = new StreamResult(resultStream);
    Source xmlData = new StreamSource(new StringReader(data));
    StreamSource styleSource = new StreamSource(new StringReader(stylesheet));
    TransformerFactory tf = TransformerFactory.newInstance();
    Templates t = tf.newTemplates(styleSource);
    Transformer trans = t.newTransformer();
    trans.transform(xmlData, transStreamResult);
    return resultStream.toString();
}If you run it with jdk1.4, the yellow stars will (correctly) print first. If you run it with JDK 1.5, the white stars will print first.
WTF?

More info: I downloaded xalan from xml.apache.org, and by adding xalan.jar to the classpath, I can get JDK1.5 to output the stars in the right order. So this appears to be some issue having directly to do with the XSLTC transformer.

Multiple Archive databases

I can split out multiple archive databases just like I split out multiple primary databases on Exch 2013, correct?
Thank you.

Hi,
Do you mean you want to split one archive database into multiple archive databases? If so, you can move some archive mailboxes from one archive database to another archive database using the New-MoveRequest command.
If I have misunderstood your concern, please feel free to let me know. For more details about the New-MoveRequest command, please refer to
New-MoveRequest.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Multiple "Archiving" is accidentally changing direction on me. Anyone else?(Starts going DOWN sometimes)

Similar Messages

Maybe you are looking for