Multiple Assignments Issue

We are in process of implementing Multiple assignments for a clients despite the assignment carries same Payroll and GRE .Could anyone list on the impact of having multiple assignments , any document id to review,
Basically to take a stock of bad effects , when configuring Retropay, Tax distribution, Benefits Deduction..etc..Please advise
Thanks
-S-

Hi
Thanks for that - I now have it working.
I am however having issues with Totals.
They are fine in Discoverer Plus but I need to run this report in Desktop.
In Desktop, I have totals for rows and totals for columns for both HeadCount and FTE.
Initially, none were showing.
After changing the aggregation option from 'Default aggregation behaviour' to 'Show the sum of the values', I now get everything except the grand total for HeadCount.
Example below
______________Head Count____________________________FTE
________Asg Cat 1______Asg Cat 2____Total______Asg Cat 1____Asg Cat 2______Total
Org1________2____________3__________5__________2____________3___________5
Org2________1____________2__________3__________1____________2___________3
Total________3____________5_____________________3____________5___________8
As you can see, I'm getting every total except the total of '8' for HeadCount but I am getting it for FTE.
I know this is often due to folder joins, but FTE and HeadCount are coming from the same folder, yet FTE is working and HeadCount isn't.
Any ideas?
Many thanks
Martin
Edited by: christm31 on May 4, 2012 10:27 AM

Similar Messages

Multiple Assignments in Timekeeper entry form

Team,
We are trying to setup multiple assignments for Timekeeper.
We followed the whitepaper out on Metalink and got most of the stuff working.
Now, we are showing a list of jobs for each employee to choose from whether it is primary job or secondary job.
The issue that we are getting into, how do we filter the list just for the employee that we are entering timecard for.
This is doable in Self service using right conditions but not clear on how to do this in timekeeper.
Has anyone done this before?
Any help will be appreciated.
Thanks
Arul

I presume you have a specific column in TK for the job and that you have linked this through the TK layout preference.
Have you tried making the LOV behind this column dependent on the employee id of the row you are querying? Not sure if it's possible, but worth a try.
Otherwise, I would suggest that you create a Time Entry Rule which is linked to a TER Group just for the TK. The TER could then do the validation to make sure you don't select an invalid value for the employee. It's a bit late in the process, but would prevent errors.
This TER has been used on my projects to ensure that the hours type selected is valid for the employee. This is a simialr scenario.
Regards
Tim

NI Multiple Assignments Checkbox - Person Record

Hi,
Please can someone explain what the "NI Multiple Assignments" checkbox is used for on the person record (ie, what it represents)? It looks as though it represents whether a user has multiple assignments, however why would we need a checkbox to do that? Surely we could derive that from the assignment records? We have some issues around RTI which we think may be related to this.
Regards

I think , we can use to have same NI element to the other assignment whihc we will set up on person , if we set multiple assignments and all assignments having same NI is concept behind this

Multiple OS issues with Email set up; "People" ; Synching phone not working as advertised

Nokia Lumia 822
Purchased yesterday (2/10/13)
So far I have spent 14 hours attempting to resolve what feel like endless errors and bugs. If I can;t get these resolved in the next 48 hours the phone goes back. I am so disappointed I waited especially for this phone - heard great stuff. My experience is it sucks. Worst phone ever.
1) POP3 email accounts are non functional. I have attempted to set up and delete and re-set up now multiple times. Each time presents a fresh new nightmare.
Issue 1 - Email account receives email but will not send. Error message goes something like <" Problem sending message. Message failed to send. Problem with Files or Data on your device." >
Issue 2 - Tapping email + accounts sends me back to start screen cannot even set up account
Issue 3 - I get to add email account I enter my information but no account is created
Issue 4 - I set up an account and I get an error message stating my information cannot be found.
Issue 5 - trying to open email from start screen just resets to start screen over and over and over NEVER opens the account.
These are deal breaker issues. I have multiple email accounts on different platforms. If I cannot access my various emails AND send from those accounts this is NOT the phone for me.
2) PEOPLE does not function. ALSO multiple various issues and never the same one twice.
Issue 1 - I tap on a contact and get sent to the start screen over and over and over and over again.
Issue 2 I tap on a contact and the phone freezes and wont respond unless I pull the battery
Issue 3 I open a contact and make an edit, save the contact but the change is never reflected in the list
Issue 4 I try and search for a contact and the search freezes - only option is to return to start screen
3) Scrolling thru any APP randomly takes me back to start screen.
I dread attempting to synch Outlook calendar and contacts on my PC to hotmail - especially if I can't even set up email. And it seems like even holding it will jettison me out of anything I'm doing and back to start screen.
If I can't get these issues resolved. look like I'll be going back to my 3 year old Blackberry Bold which performed flawlessly. It may not be the most impressive phone out there but it did what I needed it to do with out any issues.

Interesting Twitter conversation VZWSupport on Twitter. It was suggested to try a HARD reset - and if that doesn't work take the phone back.
Since I don;t have anything set up yet that's my solution.
I see a BlackBerry Z10 in my future

A person can have multiple assignments as an employee.

I'm interested for the architecture using 2 PERNR.
A person can have multiple assignments as an employee. To make a distinction between employment relationships (employees = 0EMPLOYEE) and real people (0PERSON), the person is an attribute of the employee.
Why "multiple assignments"? for what?

Hi Konstantin,
This may be the case in concurrent employment.
Please check:
http://help.sap.com/saphelp_47x200/helpdata/en/31/39de77c15c5043b0b420b60a89e4db/content.htm
In general, when an employee has two personnel assignments, we generally create two separate positions and assign the same personnel numbers to these positions, percentage of which assignment not be more than 100%.
However, if according to customer policy, a real person is to be paid/benefits are arranged differently based on the personel assignment he/she is holding, then you will need two separate employee numbers. In the end, however, there is only one physical person so you will maintain this information using 0PERSON characteristic.
Regards,
Dilek

Union deductions across multiple assignments

Hi there,
We are setting up Unison Union deductions which has rates based in steps on the total pay across all assignments. We have a wide use of multiple assignments. Due to the way it is calculated it is not possible to calculate the Unison amount against each individual assignment and combine it.
I gather we can do this using Historic Rates but have so far failed to get it picking up rates from all assignments.
Any help is greatly appreciated
Neil

Can you see if this metalink note helps
How to Run One FSG Report For Multiple Sets of Books [ID 1023889.6]
Thanks,
Anil

Employes with Multiple Assignments

Hi all
can you please let me know how can i get list of employees with multiple assignments.
Thanks in advance

This has now been resolved, closing this post.
thanks

OTL Multiple Assignments Approvals

Hi All,
I have configured OTL time entry with multiple assignments successfully. Each assignment has its own Supervisor. Now I am faced with the challenge on how to send approvals for multiple assignments. I started using Formula(Select mechanism) but not quite clear on if each line entered on the time card, will go thru the formula. and pick the Supervisor.
I would appreciate any inputs.
Thanks
Veena

Authorized delegate screens won't support these customizations. Also on the approval front, its a tough job getting the approval routed based on the assignments, would rather suggest for a redesign of the solution approach.
--Shiv

Multiple Goods Issue documents for single delivery?

Hi
I am getting multiple goods issue documents for single delivery.
In a order there are 3 line items, and one delivery is created and 3 goods issue documents.
What is the probable reasons for this.
The requirement is for one order with n items there should be one delivery document and one goods issue document.
Inputs requested.

Since you havent put the issue in details, I have listed my guessses.
This may be happening due to mainly these three reasons. Please answer them and get back to me.
1) The three Good issue may be happeneing due to split delivery active for the item. If yes then correction should be in the Material master.
2) the availability check scheduled is set in that way. If yes please configure the availability and transfer of requirement.
3) Scheduling of the goods throught that particular shipping point. If yes then please conficgure the shipping tab in Logistic Execution.
Please let me know if the problem persists and award points if solved.
Thanks
Adi

Oracle HR restrictions based on multiple assignments and multiple GRE's.

In oracle HR, with multiple assignments and multiple GRE. How can we restrict to having 1 assignment per GRE. I do not want more than 1 assignments per GRE. Has anyone done this before?

Hi,
If the requirement is to prevent the creation of multiple assignments, you can achieve that by personalizing the assignment form.
Thanks
Satheesh

Multiple assignments of one sales order to several customers

Hello all,
One of my users send me a Excel report with multiple assignments of sales orders to different sold-to parties. It looks somehow like this:
Sold-to Sales Order
A........100
.........200
B........100
.........200
.........300
C........100
.........200
This error is not reproduceable but occured now the second time. If I run the query it looks fine.
Before I blame it to the user I would like to know if there are any technical reasons why this could happen, e.g. a change run is active while the report is running or the OLAP engine or the cache may be buggy in certain cases.
Any hints?
thanks,
Marco
Message was edited by: myself
Marco Males

Thanks for all your replies!
I checked the cube content and it was okay. But I didn't check the index. If this was wrong then every user would have the same problem, wouldn't they?
My guess is that it was a problem with refreshing the report. I told the user to delete all data and then save the workbook again. So, when he refreshes it, there are no old values in it.
Marco

My dv5 laptop has an internal "typing" noise/multiple security issues

I'm not sure if this is a problem, but since I've had all kinds of issues with this particular model (the first Pavilion we were sent by HP had to be returned because the engineers finally deemed it unfixable), I thought I'd ask. I'm a little nervous about a sound that makes me think of little gremlins inside the unit typing away. It's not constant, but I'm wondering if that's normal and what the noise is.
Another problem is that periodically I'll get a message about the computer having "multiple security issues". I then do a virus scan, which turns out fine, so I don't know what it means.

The Intel chipset issue is not at all related for your Notebook. Its quite unfortunate you are facing this problem as I would say its a coincidence that even your second hard drive went bad so soon.
Time for you to RMA the new hard drive.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Multiple CS6 issues

Hi -
At work we recently got upgraded to CS 6 and I've encountered multiple functional issues which have slowed our workflow down considerably.
1) Drag and dropping from either the color or line swatches on the bottom of the tool bar (at right) no longer works. Dragging and dropping from the color pallet (fill or line) does not work either. In order to change color of an object we either have to create a NEW object with the new line or fill color and eye dropper it, or select the object- go to the CMYK (or RGB) sliders and enter the numerical version of the colors we want. VERY tedious.
2) for the reasons listed in #1, the gradient tool has become nearly unusable. You simply can not drag new colors into the gradient to edit it at all. The gradient tool has always been somewhat difficult to use- with CS6 it has become useless.
3) there are numerous glitchy interface issues that have cropped in- just one is the PMS swatch libraries- trying to get the library to list by name does not work periodically and the search swatch by number option randomly disappears and reappears. Recently the option to search field has disappeared completely and scrolling through the PMS swatch book constantly jumps back to the top (PMS 100 yellow) when trying to select colors. This effectively makes using the PMS swatches useless. We've had to do a work around by importing shapes filled with certain PMS colors and eye dropper them as needed. Not a great way to work as you can imagine.
Has anyone else encountered these issues and are there work arounds? We've done re-installs and that has not helped so far. Please note they are not letting us upgrade to CS Cloud version so no help there either. yay.
Thanks in advance for any help!
David

David,
Did you reinstall using the full three step way?
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Multiple iPhone Issues

Hello,
I have been having multiple iPhone issues after updating my phone to iOS 6.1 and restoring it my phone number is grayed out on Facetime and iMessage in Settings and sometimes when I go to the app store the old app store design loads that was in iOS 5 and the search and updates and buttons below get reaaranged
It looks like that in messages and Facetime
NOTICE THAT THE EMAILS AND NUMBER ARED EDITED!
Please help me fix this issue

have you tried turning off imessage in settings and then turning it back on again to re-activate? have you tried resetting the phone by holding the sleep/wake button and the home button until the phone restarts?

Multiple freeze issues on my laptop

Hello.
I'm experiencing multiple freeze issues lately. Inspecting all logs available but found nothing.
1. sometimes gdm freezes while switching users in Gnome 3. I share my laptop with my wife, separate accounts. While switching from one user to another, somethimes gdm (screen with account names) hangs, in situations when both users are logged or one is not. Only thing that helps is to switch to console, log in and restart gdm.
2. I had issues with suspend, so I turned off suspend based on inactivity. Now sometimes when laptop has some idle time and is inactive, screen turns off. Then it hands, all leds are on, unable to wake (turn on display), nothing works, switching to console, nothing.
3. Total freeze while logging into Gnome 3 session of my wife. Black screen, all leds on, only hard turn off (long press power button).
I inspected all logs in /var/log, also .xsession-errors in both home folders of both users. Can't find anything .... I'm desperate. Please post some tips, how to log more. I can't even submit or search for some bugs as I can't determine even what is the cause.
My laptop is ASUS X50Z.
lspci:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Packages installed -> http://pastebin.com/efUsSdr4
I will gladly post more info.

lsmod:
Module Size Used by
fuse 66858 2
ipv6 288122 24
ext3 191948 1
jbd 63179 1 ext3
uvcvideo 64995 0
videodev 85100 1 uvcvideo
media 10565 2 uvcvideo,videodev
v4l2_compat_ioctl32 8644 1 videodev
cryptd 8309 0
aes_x86_64 7508 2
aes_generic 26138 1 aes_x86_64
ecb 2073 1
btusb 11385 0
joydev 9895 0
bluetooth 150884 1 btusb
arc4 1410 2
ath9k 86553 0
radeon 994864 3
mac80211 221931 1 ath9k
ttm 54872 1 radeon
drm_kms_helper 25721 1 radeon
serio_raw 4294 0
i2c_piix4 8224 0
psmouse 55501 0
snd_hda_codec_realtek 282216 1
ath9k_common 1858 1 ath9k
drm 185736 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 5199 1 radeon
i2c_core 20460 6 videodev,radeon,drm_kms_helper,i2c_piix4,drm,i2c_algo_bit
pcspkr 1819 0
asus_laptop 14098 0
sr_mod 14951 0
ath9k_hw 304895 2 ath9k,ath9k_common
ath 14770 2 ath9k,ath9k_hw
cdrom 36553 1 sr_mod
r8169 45411 0
evdev 9530 10
cfg80211 165636 3 ath9k,mac80211,ath
sparse_keymap 3120 1 asus_laptop
k10temp 2883 0
processor 24224 0
thermal 7799 0
button 4470 0
ac 2344 0
video 11164 0
battery 6453 0
snd_hda_intel 22410 2
snd_hda_codec 80889 2 snd_hda_codec_realtek,snd_hda_intel
sp5100_tco 4568 0
shpchp 26281 0
mii 4059 1 r8169
pci_hotplug 25454 1 shpchp
snd_hwdep 6357 1 snd_hda_codec
snd_pcm 74368 2 snd_hda_intel,snd_hda_codec
rfkill 15498 4 bluetooth,asus_laptop,cfg80211
snd_timer 19544 1 snd_pcm
snd 58362 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6210 1 snd
snd_page_alloc 7153 2 snd_hda_intel,snd_pcm
vboxdrv 1790690 0
ext4 375413 2
mbcache 5881 2 ext3,ext4
jbd2 70667 1 ext4
crc16 1359 2 bluetooth,ext4
sd_mod 28275 3
usbhid 35352 0
pata_acpi 3376 0
hid 82435 1 usbhid
ohci_hcd 21714 0
pata_atiixp 3928 0
ahci 20005 2
libahci 19559 1 ahci
libata 166724 4 pata_acpi,pata_atiixp,ahci,libahci
ehci_hcd 40794 0
usbcore 144144 6 uvcvideo,btusb,usbhid,ohci_hcd,ehci_hcd
scsi_mod 132794 3 sr_mod,sd_mod,libata
dm_mod 69692 12
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Bratislava"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(dm-mod vboxdrv)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="gorgoroth"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng netfs crond dbus gdm networkmanager @dropboxd sshd cupsd)

Multiple Assignments Issue

Similar Messages

Maybe you are looking for