Multiple Attachement in Apex Mail
Hi,
Can we add more than one attachment in a mail ? , I tried using APEX_MAIL.ADD_ATTACHMENT, In this only 1 attachment i am able to add. I have a requirement to attach more than one, Please suggest me how to add more than one attachment.
I am using oracle 11g XE and Apex 4
Thanks
Sudhir
Sudhir_Meru wrote:
I did not post any code it was a explanation on the requirement.You said:
I tried using APEX_MAIL.ADD_ATTACHMENTPost what you tried.
I was trying to explain to the userExplain what to whom? You've lost me.
As it says in the documentation linked to above:
>
ADD_ATTACHMENT Procedure
This procedure sends an outbound email message from an application as an attachment. To add multiple attachments to a single email, APEX_MAIL.ADD_ATTACHMENT can be called repeatedly for a single email message.
Similar Messages
-
Multiple attachment in sender mail adapter with PI 7.11
Hello all,
I've got a scenario MAIL -> PI -> MAIL.
In my sender adapter mail, i have two attachment.
From what i've saw on different thread, it wasn't possible to handle this case in standard with PI 7.0.
Is it possible now with PI 7.11 ? Or must i develop a specific module for that ?
Thank you.Hi Jean ,
I got the same issue too, the Scenario is MAIL ->FILE . Mail Sender Adapter picks up the 1 PDF attachment and saves in network folder successfully but not multiple attachments of a mail.
These are the setting in Module configuration I made:
1. The IMAPS was used in Mail Sender Adapter : imaps://10.192.101.16:993/Inbox
*IP address of the Mail Server was got from the Admin )
2. Ports : 143, 993 are opened for the Mail Server to access for XI SERver ( Raised an Ticket to open Ports of Mail server :NZTxxx.dknz.nzcorp.net)
3. As the attachment was only in PDF : Added swapbean in Module tab as below :
Process Sequesnce :
-Make sure: AF_Modules/PayloadSwapBean Modul key : TRANSFORM is added before sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
-And under Module Configuration select : TRANSFORM as Module Key and add >
swap.keyName Content-Disposition
swap.keyName Content-Description
swap.keyValue attachment;filename='MailAttachment-1.pdf"
swap.keyValue MailAttachment-1
-IF you get to know how to fetch multiple attachment , Please update.
Thanks,
Vara -
How to send multiple attachment in single mail
i am using FM SO_NEW_DOCUMENT_ATT_SEND_API1 for sending mail.
pls guide me how can i modify my code so that i can send multiple attachmentsHi Manish,
Check out the links below.
E-mail multiple PDF attachments
Send a Single Mail with Multiple Attachment
Hope it helps.
Regards,
Amit
*Always reward points for helpful answers
Message was edited by:
Amit Kumar -
How to send multiple attachements in single mail
Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path LIKE rlgrap OCCURS 0 WITH HEADER LINE,
lt_index TYPE sy-tabix,
doc_type(3) TYPE c,
descr LIKE it_objpack_basis-obj_descr,
temp_data LIKE w_path,
temp1 TYPE string,
tab_lines TYPE i,
langu(15) TYPE c,
expirydate TYPE so_obj_edt,
L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
'not logged on for 180 days for client' sy-mandt
INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num = w_tab_line.
it_objpack_basis-doc_type = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
temp1 = w_path.
descr = w_path.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '\'
string = descr
IMPORTING
head = descr
tail = temp_data.
CALL FUNCTION 'STRING_REVERSE'
EXPORTING
string = descr
lang = 'E'
IMPORTING
rstring = descr.
CALL FUNCTION 'STRING_SPLIT'
EXPORTING
delimiter = '.'
string = descr
IMPORTING
head = temp_data
tail = doc_type.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = temp1
filetype = 'BIN'
header_length = 0
read_by_line = 'X'
replacement = '#'
TABLES
data_tab = it_upload.
DESCRIBE TABLE it_upload LINES tab_lines.
DESCRIBE TABLE it_objbin_basis LINES lt_index.
lt_index = lt_index + 1.
LOOP AT it_upload.
wa_objbin_basis-line = it_upload-line.
APPEND wa_objbin_basis TO it_objbin_basis.
CLEAR wa_objbin_basis.
ENDLOOP.
it_objpack_basis-transf_bin = 'X'.
it_objpack_basis-head_start = 0.
it_objpack_basis-head_num = 0.
it_objpack_basis-body_start = lt_index.
it_objpack_basis-body_num = tab_lines.
it_objpack_basis-doc_type = doc_type.
it_objpack_basis-obj_descr = descr.
it_objpack_basis-doc_size = tab_lines * 255.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_objpack_basis
contents_txt = it_objtxt_basis
contents_bin = it_objbin_basis
receivers = it_reclist_basis
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc EQ 0.
SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji -
Multiple attachment download in mail
Have an email with 18 attachments (word and excel stuff) is my only option to click (or right-click) each one to download them?? or is there a quicker (read simpler) way.
This is via web browser iCloud, as I'm running an older macbook Pro.....You can same them all at the same time with this option in Mail:
Witb the online Mail click on the paperclip:
and then you only have to click once on each of the listed attachments to download them:
No right clicking needed.
OT -
Sending Multiple attachements (PDF) in a single email
Hello All,
I came across below link but could not understand.
How to send multiple attachements in single mail
Any idea how i can send email with Multiple attachements (PDF format files). Thanks.Smart Form PDF Link
http://help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://sap.ionelburlacu.ro/sap0/sapsf001.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/16/a369b1800e4bdda978ee0fe3b7bd2c/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-img.com/smartforms/smart-001.htm
Rewards if useful................
Minal -
Sending mail with multiple attachment
hi.
i want to send mail with multiple attachment.
i m succeed in sending multiple attachment but the second pdf is not open.
its given error like "This file is damaged and could not be open.
pls check my code. and
give the solution....
point should be assured...........
hope all u r understand my problem..
& tell me where is i m missing something.
REPORT YSDPASALE1_MAIL LINE-SIZE 110.
data : year_month(6) type c.
data : from_date like sy-datum,to_date like sy-datum.
INITIALIZATION.
year_month = sy-datum+0(6).
CONCATENATE year_month '01' into from_date.
to_date = sy-datum.
ranges : temp for mkpf-budat.
temp-low = from_date.
temp-high = to_date.
append temp to temp.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
jobname like TBTCJOB-JOBNAME,
L_RELEASE(1) TYPE c.
CONSTANTS : l_c_device(4) VALUE 'LOCL'.
DATA : t type i value 0.
DATA : p_email1 like somlreci1-receiver,
p_sender LIKE somlreci1-receiver.
Data Declaration
DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_desc1 TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des,
gd_mtitle LIKE sodocchgi1-obj_descr.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
DATA: BEGIN OF mailstr OCCURS 0,
p_email like somlreci1-receiver,
END OF mailstr.
DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
SUBMIT YSDPASALE1 with bdt in temp
to sap-spool
with line-size = '255'
with KEEP_IN_SPOOL = 'X'
with IMMEDIATELY = ' '
WITHOUT SPOOL DYNPRO
AND RETURN
NEW-PAGE PRINT ON
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf.
select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
from ymail
where ytcode = 'YMIS008'.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
'request to be created.'.
ENDIF.
wait up to 3 seconds.
submit YSD_MONTHLY_SALES
USING SELECTION-SET 'MAIL'
to sap-spool
with KEEP_IN_SPOOL = 'X'
with IMMEDIATELY = ' ' "SPACE
WITHOUT SPOOL DYNPRO
AND RETURN
NEW-PAGE PRINT ON
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
new-page print off.
IF sy-batch EQ 'X'.
gd_attachment_desc1 = 'YMIS10'.
gd_mtitle = 'Monthly Sales Report'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf1.
loop at it_mess_att.
move it_mess_att1 to it_mess_att.
APPEND it_mess_att.
endloop.
APPEND LINES OF it_mess_att1 to it_mess_att.
free it_mess_att1.
it_mess_att[] = it_mess_att1[].
insert LINES OF it_mess_att1 into it_mess_att.
APPEND LINES OF it_mess_att2 to it_mess_att .
insert LINES OF it_mess_att1 into it_mess_att.
insert LINES OF it_mess_att2 into it_mess_att.
loop at ymis008tab into mailstr.
p_email1 = mailstr-p_email.
p_email1 = '[email protected]'.
PERFORM process_email.
endloop.
clear mailstr.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ELSE.
SKIP.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM convert_spool_to_pdf1.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att1 = gd_buffer.
APPEND it_mess_att1.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
CHECK gd_recsize > 0 or gd_recsize1 > 0.
PERFORM send_email." USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email." USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = gd_attachment_desc1 .
gd_attachment_desc = 'YPP18 - Daily Highlights'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Dear Sir,'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'kindly find the attached document'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Do not reply on this mail, It is generated from SAP'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Regards,'.
APPEND it_mess_bod.
it_mess_bod = 'Arpit Shah'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
it_mess_att1
using "p_email
gd_mtitle
'Testing mail generated from SAP'
'Daily Highlights Abstract Report - YPP18'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
it_attach1
using "p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data1-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
For 2nd Attachments
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach1 INDEX w_cnt.
w_doc_data-doc_size = w_doc_data1-doc_size +
( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
APPEND LINES OF it_attach1 to t_attachment.
t_attachment[] = it_attach1[].
APPEND LINES OF it_attach1 to t_attachment.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS008'."ld_attdescription.
t_packing_list-obj_name = 'YMIS008'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
clear t_packing_list.
for 2 attachments
data : a type i,b type i.
a = t_packing_list-body_num.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = a + 1. "1
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
a = t_packing_list-body_num.
clear t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = a + 1.
t_packing_list-body_num = t_packing_list-body_num + 1.
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
t_packing_list-body_num = a + t_packing_list-body_num .
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
loop at ymis008tab into mailstr.
t_receivers-receiver = mailstr-p_email. "ld_email.
t_receivers-receiver = p_email1.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'. "X "Read Acknoledgement
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
endloop.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Rgds.
ArpitHi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John. -
Send a Single Mail with Multiple Attachment
Hi Every One,
SO_DOCUMENT_SEND_API1 is the function Module used to send a file as attachment with the mail.My requirement is to send more than one file as multiple attachments in the same mail. Is this Possible? and How?
Regds,
Rajeev.NYes this is possible. This is what the packing_list parameter of this function module is for. You put all of your content together into the contents_bin or the contents_txt (or a combination of both). You then add an entry into the packing_list table for each individual element. Here is some code samples for filling in the packing_list:
objpack-transf_bin = 'X'.
objpack-head_start = body_counter.
objpack-head_num = 1.
objpack-body_start = body_counter.
objpack-body_num = tab_lines.
objpack-doc_type = extention.
objpack-obj_name = objhead.
move objhead to
objpack-obj_descr.
body_counter = body_counter + tab_lines.
objpack-doc_size = tab_lines * 255.
append objpack.
We keep a counter for each element. We have to supply the starting position of each element and its total lenght. -
Send Mail with Multiple Attachment
How to send mail with multiple attachment. The documents are in a table column BLOB. Read and attach in to mail directly.
We dont want save the documents into hard disk and attach to mail. Please Help
If you have java procedure or Pl/Sql Procedure. I think pl/sql cant. So please mail me code to [email protected] mail id. Thank you.
Thanks in advance
SelvamHi all
Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like pdf,doc,txt,xls,jpg, .
And also the Utl_mail is very slow. Its using RAW type.
I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
Thank you,
Selvam -
Sending UTL_SMTP mail with Multiple attachment
Hi,
My Environment ----> Oracle Database 11g r1 on Windows 2003 Server (64Bit).
The below script i used for sending mail with single attachment now i am trying to send mail with multiple attachment please tell me how to achieve this
DECLARE
/*LOB operation related varriables */
v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
l_buffer RAW(54);
l_amount BINARY_INTEGER := 54;
l_pos INTEGER := 1;
l_blob BLOB := EMPTY_BLOB;
l_blob_len INTEGER;
v_amount INTEGER;
/*UTL_SMTP related varriavles. */
v_connection_handle UTL_SMTP.CONNECTION;
v_from_email_address VARCHAR2(30) := '[email protected]';
v_to_email_address VARCHAR2(30) := '[email protected]';
v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
/* This send_header procedure is written in the documentation */
PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
BEGIN
UTL_SMTP.WRITE_DATA(v_connection_handle,
pi_name || ': ' || pi_header || UTL_TCP.CRLF);
END;
BEGIN
/*Preparing the LOB from file for attachment. */
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
l_blob_len := DBMS_LOB.getlength(l_blob);
/*UTL_SMTP related coding. */
v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
UTL_SMTP.OPEN_DATA(v_connection_handle);
send_header('From', '"Sender"');
send_header('To', '"Recipient"');
send_header('Subject', v_subject);
--MIME header.
UTL_SMTP.WRITE_DATA(v_connection_handle,
'MIME-Version: 1.0' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Body
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: text/plain;' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' charset=US-ASCII' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer := NULL;
l_pos := l_pos + l_amount;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Close Email
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
UTL_SMTP.CLOSE_DATA(v_connection_handle);
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
EXCEPTION
WHEN OTHERS THEN
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
RAISE;
END;
Thank you
ShanHi Saubhik
Thanks for your reply, below script i used to send mail with multiple attachments, plsql code is executing without any error messages and i am also able to receive mail with the multiple attachment.
i used your code which u posted in OTN then i changed little bit as per my need, output is ok.but the problem is if i want to add one more file then i have to add more varaiables in the code. i want to make the code which i can add more attachments without adding more varaiables i don't know the way to do this. can u please give me some hints.
Thanks for your help
Shan
Script Used:
DECLARE
/*LOB operation related varriables01 */
v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
l_buffer RAW(54);
l_amount BINARY_INTEGER := 54;
l_pos INTEGER := 1;
l_blob BLOB := EMPTY_BLOB;
l_blob_len INTEGER;
v_amount INTEGER;
/*LOB operation related varriables02 */
v_src_loc2 BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT1.LOG');
l_buffer2 RAW(54);
l_amount2 BINARY_INTEGER := 54;
l_pos2 INTEGER := 1;
l_blob2 BLOB := EMPTY_BLOB;
l_blob_len2 INTEGER;
v_amount2 INTEGER;
/*UTL_SMTP related varriavles. */
v_connection_handle UTL_SMTP.CONNECTION;
v_from_email_address VARCHAR2(30) := '[email protected]';
v_to_email_address VARCHAR2(30) := '[email protected]';
v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
/* This send_header procedure is written in the documentation */
PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
BEGIN
UTL_SMTP.WRITE_DATA(v_connection_handle,
pi_name || ': ' || pi_header || UTL_TCP.CRLF);
END;
BEGIN
/*Preparing the LOB from file for attachment01. */
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
l_blob_len := DBMS_LOB.getlength(l_blob);
/*Preparing the LOB from file for attachment02. */
DBMS_LOB.OPEN(v_src_loc2, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob2, TRUE); --Create temporary LOB to store the file.
v_amount2 := DBMS_LOB.GETLENGTH(v_src_loc2); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob2, v_src_loc2, v_amount2); -- Loading from file into temporary LOB
l_blob_len2 := DBMS_LOB.getlength(l_blob2);
/*UTL_SMTP related coding. */
v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
UTL_SMTP.OPEN_DATA(v_connection_handle);
send_header('From', '"Sender"');
send_header('To', '"Recipient"');
send_header('Subject', v_subject);
--MIME header.
UTL_SMTP.WRITE_DATA(v_connection_handle,
'MIME-Version: 1.0' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Body
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: text/plain;' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' charset=US-ASCII' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment01
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer := NULL;
l_pos := l_pos + l_amount;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Mail Attachment02
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Type: application/octet-stream' ||
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
' filename="' || 'export1.log' || '"' || --My filename
UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
/* Writing the BLOL in chunks */
WHILE l_pos2 < l_blob_len2 LOOP
DBMS_LOB.READ(l_blob2, l_amount2, l_pos2, l_buffer2);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer2));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer2 := NULL;
l_pos2 := l_pos2 + l_amount2;
END LOOP;
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
-- Close Email
UTL_SMTP.WRITE_DATA(v_connection_handle,
'--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
UTL_SMTP.WRITE_DATA(v_connection_handle,
UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
UTL_SMTP.CLOSE_DATA(v_connection_handle);
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
DBMS_LOB.FREETEMPORARY(l_blob2);
DBMS_LOB.FILECLOSE(v_src_loc2);
EXCEPTION
WHEN OTHERS THEN
UTL_SMTP.QUIT(v_connection_handle);
DBMS_LOB.FREETEMPORARY(l_blob);
DBMS_LOB.FILECLOSE(v_src_loc);
DBMS_LOB.FREETEMPORARY(l_blob2);
DBMS_LOB.FILECLOSE(v_src_loc2);
RAISE;
END;
PL/SQL procedure successfully completed.
Edited by: SHAN2009 on May 11, 2011 1:05 PM -
How to send multiple attachment s with a mail??
Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepakHi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M *
REPORT zpan_02m .
*-MAIN DECLARATION----
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
c1(10),
c2(10),
END OF wi_data.
wi_data-c1 = 'Line 1'. wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'. wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'. wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'. wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF,
con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
wi_data-c2
INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines / 2.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num = 14.
objpack-body_start = 14.
objpack-body_num = tab_lines / 2.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname. reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
OBJECT_PARB =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh. -
Is it a way to read Multiple Attachment and send all - Mail Sender?
Hi Friends ,
Can you please tell me how to send multiple Attachment in Mail Sender Adapter ?
<b> I am able to bring Multiple Attachement in Payload .But, Only one attachemen't data is passed to IS.</b>
First form the attachement i read as row bye row. Rowe like <b>123 56 98 56 9</b>6 like that , then in Integration Process i am using<b> XSLT Mapping</b> to get my required format .
It is getting the data from the First Attachement only. <b>But i am having Three attachement in payload as MailAttachement-1 , MailAttachement-2 , MailAttachement-3 like that .</b>
<b>Can you please tell me how to pass to IS as one by one attachement ?</b>
Regards .,
V.RangarajanYou want to separate each attachment in one single message?
If yeah, change your xslt mapping to a multimapping, which generate the several messages.
If not, in the receiver mail adapter, select "keep atachments" checkbox.
Regards,
Henrique. -
How to attach Multiple attachments to single mail
How to attach multiple pdfs to single mail ?
or
how to attach one pdf & One excel & One word document to single mail ?
Thanks In AdvanceHello Karunya,
Please refer to the link below.
https://wiki.sdn.sap.com/wiki/display/Snippets/Send%20email%20with%20multiple%20zipped%20attachments
Regards,
P Bansal -
Sending mail to multiple mailid from apex
Hi,
I need to send mail to multiple users from apex which is taken from a database table column. Is it possible to use LOV to send mail to multiple mail id? I tried with using collection but unable to reach it.
APEX_COLLECTION.CREATE_COLLECTION_FROM_QUERY_B(
p_collection_name => List_of_mailid,
p_query => select column from table where cond='Y');
any ideas.... thanks in advance.What you need to do is, build a string with the multiple e-mail addresses, and then when you want to send mail See this oldie but goodie thread:
Have mutiple email addresses in Apex Email functionality
Thank you,
Tony Miller
Dallas, TX -
Separate valid mail attachment in sender mail adapter
Hi Experts,
I am working on Mail -> RFC scenario in pi 7.3.
Our channel is able to process new mail having valid attachement (i.e. .xml) file.
But sometime attachment contain invalid format also like pdf, or .txt file with valid attachment.
With these types of mail, channel throw error and do not process it. But my requirement is to separate the valid attachment and process it and delete it from mail box.
What our channel is doing is it skips these kind of mails and only change the status from unread to read.
Regards
JitenderHi Jean ,
I got the same issue too, the Scenario is MAIL ->FILE . Mail Sender Adapter picks up the 1 PDF attachment and saves in network folder successfully but not multiple attachments of a mail.
These are the setting in Module configuration I made:
1. The IMAPS was used in Mail Sender Adapter : imaps://10.192.101.16:993/Inbox
*IP address of the Mail Server was got from the Admin )
2. Ports : 143, 993 are opened for the Mail Server to access for XI SERver ( Raised an Ticket to open Ports of Mail server :NZTxxx.dknz.nzcorp.net)
3. As the attachment was only in PDF : Added swapbean in Module tab as below :
Process Sequesnce :
-Make sure: AF_Modules/PayloadSwapBean Modul key : TRANSFORM is added before sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
-And under Module Configuration select : TRANSFORM as Module Key and add >
swap.keyName Content-Disposition
swap.keyName Content-Description
swap.keyValue attachment;filename='MailAttachment-1.pdf"
swap.keyValue MailAttachment-1
-IF you get to know how to fetch multiple attachment , Please update.
Thanks,
Vara
Maybe you are looking for
-
How do I transfer files from pc to mac using an external drive?
I get the that I copy files from the PC to the external drive and then copy to mac. What I do not know is what format does the external drive need to be? FAT32 is somewhat limiting.
-
Master table with two child tables in ADF Framework
Hi, I'm trying to implement single master with two detail tables using oracle adf framework of Jdev 11.1.1.4.0. I'm able to do single master-detail by using view link but unable to achieve nested details block i.e., master with nested child blocks. I
-
About read manifest problem.
Hi, I have a problem .Who can tell me how to read [*.jar]/META-INF/MANIFEST.MF file using codes in the jar ? Thanks for help!
-
CX_SY_READ_SRC_LINE_TOO_LONG what does it mean ?
Hello all. I've got the problem with FM 'REUSE_ALV_FIELDCATALOG_MERGE'. My report always fails at calling this FM. Here is the part of error message that i get: An exception occurred. This exception is dealt with in more detail below . The exce
-
ERROR during creating new Database
OS: Solaris 10 x86 (10/08) Oracle: Release 10.2.0.2.0 - Production (Standard Edition) I have just installed Oracle without basic/sample database. I was going to find out how to make it handy. What I did: # created initeric1.ora file control_files = (