Multiple attachements on mail

Dear all,
can anyone tell me how I can send a mail with two attachements. I can send one mail, but I'm a bit lost with the settings for the second attachement...

Hello,
Use this sample report.
report ztest.
data: itcpo like itcpo,
      tab_lines like sy-tabix.
* Variables for EMAIL functionality
data: maildata   like sodocchgi1.
data: mailpack   like sopcklsti1 occurs 2 with header line.
data: mailhead   like solisti1 occurs 1 with header line.
data: mailbin    like solisti1 occurs 10 with header line.
data: mailtxt    like solisti1 occurs 10 with header line.
data: mailrec    like somlrec90 occurs 0  with header line.
data: solisti1   like solisti1 occurs 0 with header line.
perform send_form_via_email.
*       FORM  SEND_FORM_VIA_EMAIL                                      *
form  send_form_via_email.
  clear:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
  refresh:  mailtxt, mailbin, mailpack, mailhead, mailrec.
* Creation of the document to be sent File Name
  maildata-obj_name = 'TEST'.
* Mail Subject
  maildata-obj_descr = 'Subject'.
* Mail Contents
  mailtxt-line = 'Here is your file'.
  append mailtxt.
* Prepare Packing List
  perform prepare_packing_list.
* Set recipient - email address here!!!
  mailrec-receiver = [email protected]'.
  mailrec-rec_type  = 'U'.
  append mailrec.
* Sending the document
  call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = maildata
            put_in_outbox              = ' '
       tables
            packing_list               = mailpack
            object_header              = mailhead
            contents_bin               = mailbin
            contents_txt               = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            operation_no_authorization = 4
            others                     = 99.
endform.
*      Form  PREPARE_PACKING_LIST
form prepare_packing_list.
  clear:    mailpack, mailbin, mailhead.
  refresh:  mailpack, mailbin, mailhead.
  describe table mailtxt lines tab_lines.
  read table mailtxt index tab_lines.
  maildata-doc_size = ( tab_lines - 1 ) * 255 + strlen( mailtxt ).
* Creation of the entry for the compressed document
  clear mailpack-transf_bin.
  mailpack-head_start = 1.
  mailpack-head_num = 0.
  mailpack-body_start = 1.
  mailpack-body_num = tab_lines.
  mailpack-doc_type = 'RAW'.
  append mailpack.
  mailhead = 'TEST.TXT'.
  append mailhead.
* File 1
  mailbin = 'This is file 1'.
  append mailbin.
  describe table mailbin lines tab_lines.
  mailpack-transf_bin = 'X'.
  mailpack-head_start = 1.
  mailpack-head_num = 1.
  mailpack-body_start = 1.
  mailpack-body_num = tab_lines.
  mailpack-doc_type = 'TXT'.
  mailpack-obj_name = 'TEST1'.
  mailpack-obj_descr = 'Subject'.
  mailpack-doc_size = tab_lines * 255.
  append mailpack.
*File 2
  mailbin = 'This is file 2'.
  append mailbin.
  data: start type i.
  data: end type i.
  start = tab_lines + 1.
  describe table mailbin lines end.
  mailpack-transf_bin = 'X'.
  mailpack-head_start = 1.
  mailpack-head_num = 1.
  mailpack-body_start = start.
  mailpack-body_num = end.
  mailpack-doc_type = 'TXT'.
  mailpack-obj_name = 'TEST2'.
  mailpack-obj_descr = 'Subject'.
  mailpack-doc_size = tab_lines * 255.
  append mailpack.
endform.
Regards,
Chandru

Similar Messages

  • Is it a way to read Multiple Attachment and send all     - Mail Sender?

    Hi Friends ,
                          Can you please tell me how to send multiple Attachment in Mail Sender Adapter  ?
                     <b>      I am able to bring Multiple Attachement in Payload .But, Only one attachemen't data is passed to IS.</b>
                        First form the attachement i read as row bye row. Rowe like  <b>123 56 98 56 9</b>6 like that  , then in Integration Process i am using<b> XSLT Mapping</b> to get   my required format .
                         It is getting the data from the First Attachement   only. <b>But i am having Three attachement in payload  as MailAttachement-1  , MailAttachement-2 , MailAttachement-3 like that .</b>
                     <b>Can you please tell me how to pass to IS as one by one attachement  ?</b>
    Regards .,
    V.Rangarajan

    You want to separate each attachment in one single message?
    If yeah, change your xslt mapping to a multimapping, which generate the several messages.
    If not, in the receiver mail adapter, select "keep atachments" checkbox.
    Regards,
    Henrique.

  • Sending mail with multiple attachment

    hi.
    i want to send mail with multiple attachment.
    i m succeed in sending multiple attachment but the second pdf is not open.
    its given error like "This file is damaged and could not be open.
    pls check my code. and
    give the solution....
    point should be assured...........
    hope all u r understand my problem..
    & tell me where is i m missing something.
    REPORT  YSDPASALE1_MAIL LINE-SIZE 110.
    data : year_month(6) type c.
    data : from_date like sy-datum,to_date like sy-datum.
    INITIALIZATION.
    year_month = sy-datum+0(6).
    CONCATENATE year_month '01' into from_date.
    to_date = sy-datum.
    ranges : temp for mkpf-budat.
    temp-low = from_date.
    temp-high = to_date.
    append temp to temp.
    DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
           jobname like TBTCJOB-JOBNAME,
           L_RELEASE(1) TYPE c.
    CONSTANTS : l_c_device(4)    VALUE 'LOCL'.
    DATA : t type i value 0.
    DATA : p_email1 like somlreci1-receiver,
            p_sender LIKE somlreci1-receiver.
    Data Declaration
    DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
    Spool IDs
    TYPES: BEGIN OF t_tbtcp.
            INCLUDE STRUCTURE tbtcp.
    TYPES: END OF t_tbtcp.
    DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
          wa_tbtcp TYPE t_tbtcp.
    Job Runtime Parameters
    DATA: gd_eventid LIKE tbtcm-eventid,
          gd_eventparm LIKE tbtcm-eventparm,
          gd_external_program_active LIKE tbtcm-xpgactive,
          gd_jobcount LIKE tbtcm-jobcount,
          gd_jobname LIKE tbtcm-jobname,
          gd_stepcount LIKE tbtcm-stepcount,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc.
    DATA:  w_recsize TYPE i.
    DATA: gd_subject  LIKE sodocchgi1-obj_descr,
          it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_sender_type     LIKE soextreci1-adr_typ,
          gd_attachment_desc TYPE so_obj_nam,
          gd_attachment_desc1 TYPE so_obj_nam,
          gd_attachment_name TYPE so_obj_des,
          gd_mtitle LIKE sodocchgi1-obj_descr.
    Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
          gd_destination LIKE rlgrap-filename,
          gd_bytecount LIKE tst01-dsize,
          gd_buffer TYPE string.
    CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
               c_no(1)     TYPE c   VALUE ' ',
               c_device(4) TYPE c   VALUE 'LOCL'.
    Binary store for PDF
    DATA: BEGIN OF it_pdf_output OCCURS 0.
            INCLUDE STRUCTURE tline.
    DATA: END OF it_pdf_output.
    DATA: BEGIN OF mailstr OCCURS 0,
            p_email like somlreci1-receiver,
          END OF mailstr.
    DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
    DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
          ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
          ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
          ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
    SUBMIT YSDPASALE1 with bdt in temp
                           to sap-spool
                          with line-size = '255'
                           with KEEP_IN_SPOOL = 'X'
                           with IMMEDIATELY = ' '
                           WITHOUT SPOOL DYNPRO
                           AND RETURN
       NEW-PAGE PRINT ON
       DESTINATION l_c_device
       IMMEDIATELY ' '
       KEEP IN SPOOL 'X'
       NEW LIST IDENTIFICATION 'X'
       NO DIALOG.
       new-page print off.
      IF sy-batch EQ 'X'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
        PERFORM convert_spool_to_pdf.
        select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
          from ymail
          where ytcode = 'YMIS008'.
    ELSE.
       SKIP.
       WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
               'request to be created.'.
      ENDIF.
    wait up to 3 seconds.
      submit YSD_MONTHLY_SALES
                                USING SELECTION-SET 'MAIL'
                                to sap-spool
                               with KEEP_IN_SPOOL = 'X'
                               with IMMEDIATELY = ' ' "SPACE
                               WITHOUT SPOOL DYNPRO
                               AND RETURN
       NEW-PAGE PRINT ON
       DESTINATION l_c_device
       IMMEDIATELY ' '
       KEEP IN SPOOL 'X'
       NEW LIST IDENTIFICATION 'X'
       NO DIALOG.
       new-page print off.
        IF sy-batch EQ 'X'.
        gd_attachment_desc1  = 'YMIS10'.
        gd_mtitle = 'Monthly Sales Report'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
        PERFORM convert_spool_to_pdf1.
       loop at it_mess_att.
        move it_mess_att1 to it_mess_att.
        APPEND it_mess_att.
       endloop.
       APPEND LINES OF it_mess_att1 to it_mess_att.
       free it_mess_att1.
        it_mess_att[] = it_mess_att1[].
        insert LINES OF it_mess_att1 into it_mess_att.
        APPEND LINES OF it_mess_att2 to it_mess_att .
         insert LINES OF it_mess_att1 into it_mess_att.
         insert LINES OF it_mess_att2 into it_mess_att.
       loop at ymis008tab into mailstr.
         p_email1 = mailstr-p_email.
          p_email1 = '[email protected]'.
           PERFORM process_email.
       endloop.
           clear mailstr.
          wait up to 5 seconds.
          SUBMIT rsconn01 WITH mode   = 'INT'
                          WITH output = 'X'
                          AND RETURN.
      ELSE.
        SKIP.
      ENDIF.
          FORM obtain_spool_id                                          *
    FORM obtain_spool_id.
      CHECK NOT ( gd_jobname IS INITIAL ).
      CHECK NOT ( gd_jobcount IS INITIAL ).
      SELECT * FROM  tbtcp
                     INTO TABLE it_tbtcp
                     WHERE      jobname     = gd_jobname
                     AND        jobcount    = gd_jobcount
                     AND        stepcount   = gd_stepcount
                     AND        listident   <> '0000000000'
                     ORDER BY   jobname
                                jobcount
                                stepcount.
      READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
      IF sy-subrc = 0.
        message s004(zdd) with gd_spool_nr.
        gd_spool_nr = wa_tbtcp-listident.
        MESSAGE s004(zdd) WITH gd_spool_nr.
      ELSE.
        MESSAGE s005(zdd).
      ENDIF.
    ENDFORM.
          FORM get_job_details                                          *
    FORM get_job_details.
    Get current job details
      CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
           IMPORTING
                eventid                 = gd_eventid
                eventparm               = gd_eventparm
                external_program_active = gd_external_program_active
                jobcount                = gd_jobcount
                jobname                 = gd_jobname
                stepcount               = gd_stepcount
           EXCEPTIONS
                no_runtime_info         = 1
                OTHERS                  = 2.
    ENDFORM.
          FORM convert_spool_to_pdf                                     *
    FORM convert_spool_to_pdf.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
    FORM convert_spool_to_pdf1.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att1 = gd_buffer.
        APPEND it_mess_att1.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
          FORM process_email                                            *
    FORM process_email.
      DESCRIBE TABLE it_mess_att LINES gd_recsize.
      DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
      CHECK gd_recsize > 0 or gd_recsize1 > 0.
      PERFORM send_email." USING p_email1.
    perform send_email using p_email2.
    ENDFORM.
          FORM send_email                                               *
    -->  p_email                                                       *
    FORM send_email." USING p_email.
    CHECK NOT ( p_email IS INITIAL ).
      REFRESH it_mess_bod.
    Default subject matter
      gd_subject         = 'Subject'.
      gd_attachment_desc = gd_attachment_desc1 .
    gd_attachment_desc = 'YPP18 - Daily Highlights'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      it_mess_bod        = 'Dear Sir,'.
      APPEND it_mess_bod.
    it_mess_bod        = ' '.
    APPEND it_mess_bod.
      it_mess_bod        = ' '.
      APPEND it_mess_bod.
      it_mess_bod        = 'kindly find the attached document'.
      APPEND it_mess_bod.
    it_mess_bod        = ' '.
    APPEND it_mess_bod.
    it_mess_bod        = 'Do not reply on this mail, It is generated from SAP'.
    APPEND it_mess_bod.
    it_mess_bod        = ' '.
    APPEND it_mess_bod.
      it_mess_bod        = ' '.
      APPEND it_mess_bod.
      it_mess_bod        = 'Regards,'.
      APPEND it_mess_bod.
      it_mess_bod        = 'Arpit Shah'.
      APPEND it_mess_bod.
    If no sender specified - default blank
      IF p_sender EQ space.
        gd_sender_type  = space.
      ELSE.
        gd_sender_type  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_mess_bod
                                          it_mess_att
                                          it_mess_att1
                                    using "p_email
                                          gd_mtitle
                                         'Testing mail generated from SAP'
                                         'Daily Highlights Abstract Report - YPP18'
                                          'PDF'
                                          gd_attachment_name
                                          gd_attachment_desc
                                          p_sender
                                          gd_sender_type
                                 changing gd_error
                                          gd_reciever.
    ENDFORM.
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables it_message
                                              it_attach
                                              it_attach1
                                        using "p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
    data:   t_packing_list like sopcklsti1 occurs 0 with header line,
            t_contents like solisti1 occurs 0 with header line,
            t_receivers like somlreci1 occurs 0 with header line,
            t_attachment like solisti1 occurs 0 with header line,
            t_object_header like solisti1 occurs 0 with header line,
            w_cnt type i,
            w_sent_all(1) type c,
            w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
    ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data1-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    For 2nd Attachments
    * Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach1 INDEX w_cnt.
      w_doc_data-doc_size = w_doc_data1-doc_size +
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
    APPEND LINES OF it_attach1 to t_attachment.
      t_attachment[] = it_attach1[].
    APPEND LINES OF it_attach1 to t_attachment.
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 0.
      t_packing_list-body_start = 1.
    DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
      DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  'YMIS008'."ld_attdescription.
      t_packing_list-obj_name   =  'YMIS008'."ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
      clear t_packing_list.
    for 2 attachments
      data : a type i,b type i.
       a = t_packing_list-body_num.
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 0.
      t_packing_list-body_start = a + 1. "1
    DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
      DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  'YMIS10'."ld_attdescription.
      t_packing_list-obj_name   =  'YMIS10'."ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    a = t_packing_list-body_num.
    clear t_packing_list.
    * Create attachment notification
    t_packing_list-transf_bin = 'X'.
    t_packing_list-head_start = 1.
    t_packing_list-head_num   = 1.
    t_packing_list-body_start = a + 1.
    t_packing_list-body_num = t_packing_list-body_num + 1.
    DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
    t_packing_list-body_num = a + t_packing_list-body_num .
    t_packing_list-doc_type   =  ld_format.
    t_packing_list-obj_descr  =  'YMIS10'."ld_attdescription.
    t_packing_list-obj_name   =  'YMIS10'."ld_attfilename.
    t_packing_list-doc_size   =  t_packing_list-body_num * 255.
    APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
    loop at ymis008tab into mailstr.
      t_receivers-receiver = mailstr-p_email.  "ld_email.
      t_receivers-receiver = p_email1.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'. "X   "Read Acknoledgement
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
    endloop.
       CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    Rgds.
    Arpit

    Hi Arpit,
    Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
    Regards,
    John.

  • Multiple attachment in sender mail adapter with PI 7.11

    Hello all,
    I've got a scenario MAIL -> PI -> MAIL.
    In my sender adapter mail, i have two attachment.
    From what i've saw on different thread, it wasn't possible to handle this case in standard with PI 7.0.
    Is it possible now with PI 7.11 ? Or must i develop a specific module for that ?
    Thank you.

    Hi Jean ,
    I got the same issue too, the Scenario is MAIL ->FILE . Mail Sender Adapter picks up the 1 PDF attachment and saves in network folder successfully but not multiple attachments of a  mail.
    These are the setting in Module configuration I made:
    1. The IMAPS was used in Mail Sender Adapter : imaps://10.192.101.16:993/Inbox
    *IP address of the Mail Server was got from the Admin )
    2. Ports : 143, 993 are opened for the Mail Server to access for XI SERver ( Raised an Ticket to open Ports of Mail server :NZTxxx.dknz.nzcorp.net)
    3. As the attachment was only in PDF : Added swapbean in Module tab as below :
    Process Sequesnce :
    -Make sure: AF_Modules/PayloadSwapBean Modul key : TRANSFORM is added before sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
    -And under Module Configuration select : TRANSFORM as Module Key and add >
    swap.keyName Content-Disposition
    swap.keyName Content-Description
    swap.keyValue attachment;filename='MailAttachment-1.pdf"
    swap.keyValue MailAttachment-1
    -IF you get to know how to fetch multiple attachment , Please update.
    Thanks,
    Vara

  • Send Mail with Multiple Attachment

    How to send mail with multiple attachment. The documents are in a table column BLOB. Read and attach in to mail directly.
    We don’t want save the documents into hard disk and attach to mail. Please Help
    If you have java procedure or Pl/Sql Procedure. I think pl/sql can’t. So please mail me code to [email protected] mail id. Thank you.
    Thanks in advance
    Selvam

    Hi all
    Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like ‘pdf’,’doc’,’txt’,’xls’,’jpg’,….
    And also the Utl_mail is very slow. Its using RAW type.
    I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
    Thank you,
    Selvam

  • Sending UTL_SMTP mail with Multiple attachment

    Hi,
    My Environment ----> Oracle Database 11g r1 on Windows 2003 Server (64Bit).
    The below script i used for sending mail with single attachment now i am trying to send mail with multiple attachment please tell me how to achieve this
    DECLARE
    /*LOB operation related varriables */
    v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
    l_buffer RAW(54);
    l_amount BINARY_INTEGER := 54;
    l_pos INTEGER := 1;
    l_blob BLOB := EMPTY_BLOB;
    l_blob_len INTEGER;
    v_amount INTEGER;
    /*UTL_SMTP related varriavles. */
    v_connection_handle UTL_SMTP.CONNECTION;
    v_from_email_address VARCHAR2(30) := '[email protected]';
    v_to_email_address VARCHAR2(30) := '[email protected]';
    v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
    v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
    l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
    /* This send_header procedure is written in the documentation */
    PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
    BEGIN
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    pi_name || ': ' || pi_header || UTL_TCP.CRLF);
    END;
    BEGIN
    /*Preparing the LOB from file for attachment. */
    DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
    DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
    v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
    DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
    l_blob_len := DBMS_LOB.getlength(l_blob);
    /*UTL_SMTP related coding. */
    v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
    UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
    UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
    UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
    UTL_SMTP.OPEN_DATA(v_connection_handle);
    send_header('From', '"Sender"');
    send_header('To', '"Recipient"');
    send_header('Subject', v_subject);
    --MIME header.
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'MIME-Version: 1.0' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Body
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: text/plain;' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' charset=US-ASCII' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Attachment
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: application/octet-stream' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' filename="' || 'export.log' || '"' || --My filename
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    /* Writing the BLOL in chunks */
    WHILE l_pos < l_blob_len LOOP
    DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
    UTL_SMTP.write_raw_data(v_connection_handle,
    UTL_ENCODE.BASE64_ENCODE(l_buffer));
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    l_buffer := NULL;
    l_pos := l_pos + l_amount;
    END LOOP;
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Close Email
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
    UTL_SMTP.CLOSE_DATA(v_connection_handle);
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
    EXCEPTION
    WHEN OTHERS THEN
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
    RAISE;
    END;
    Thank you
    Shan

    Hi Saubhik
    Thanks for your reply, below script i used to send mail with multiple attachments, plsql code is executing without any error messages and i am also able to receive mail with the multiple attachment.
    i used your code which u posted in OTN then i changed little bit as per my need, output is ok.but the problem is if i want to add one more file then i have to add more varaiables in the code. i want to make the code which i can add more attachments without adding more varaiables i don't know the way to do this. can u please give me some hints.
    Thanks for your help
    Shan
    Script Used:
    DECLARE
    /*LOB operation related varriables01 */
    v_src_loc BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT.LOG');
    l_buffer RAW(54);
    l_amount BINARY_INTEGER := 54;
    l_pos INTEGER := 1;
    l_blob BLOB := EMPTY_BLOB;
    l_blob_len INTEGER;
    v_amount INTEGER;
    /*LOB operation related varriables02 */
    v_src_loc2 BFILE := BFILENAME('DATA_PUMP_DIR', 'EXPORT1.LOG');
    l_buffer2 RAW(54);
    l_amount2 BINARY_INTEGER := 54;
    l_pos2 INTEGER := 1;
    l_blob2 BLOB := EMPTY_BLOB;
    l_blob_len2 INTEGER;
    v_amount2 INTEGER;
    /*UTL_SMTP related varriavles. */
    v_connection_handle UTL_SMTP.CONNECTION;
    v_from_email_address VARCHAR2(30) := '[email protected]';
    v_to_email_address VARCHAR2(30) := '[email protected]';
    v_smtp_host VARCHAR2(30) := 'MAIL.EXPORT.COM'; --My mail server, replace it with yours.
    v_subject VARCHAR2(30) := 'MULTIPLE Attachment Test';
    l_message VARCHAR2(200) := 'TEST Mail for Multiple Attachment';
    /* This send_header procedure is written in the documentation */
    PROCEDURE send_header(pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
    BEGIN
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    pi_name || ': ' || pi_header || UTL_TCP.CRLF);
    END;
    BEGIN
    /*Preparing the LOB from file for attachment01. */
    DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
    DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
    v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
    DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
    l_blob_len := DBMS_LOB.getlength(l_blob);
    /*Preparing the LOB from file for attachment02. */
    DBMS_LOB.OPEN(v_src_loc2, DBMS_LOB.LOB_READONLY); --Read the file
    DBMS_LOB.CREATETEMPORARY(l_blob2, TRUE); --Create temporary LOB to store the file.
    v_amount2 := DBMS_LOB.GETLENGTH(v_src_loc2); --Amount to store.
    DBMS_LOB.LOADFROMFILE(l_blob2, v_src_loc2, v_amount2); -- Loading from file into temporary LOB
    l_blob_len2 := DBMS_LOB.getlength(l_blob2);
    /*UTL_SMTP related coding. */
    v_connection_handle := UTL_SMTP.OPEN_CONNECTION(host => v_smtp_host);
    UTL_SMTP.HELO(v_connection_handle, v_smtp_host);
    UTL_SMTP.MAIL(v_connection_handle, v_from_email_address);
    UTL_SMTP.RCPT(v_connection_handle, v_to_email_address);
    UTL_SMTP.OPEN_DATA(v_connection_handle);
    send_header('From', '"Sender"');
    send_header('To', '"Recipient"');
    send_header('Subject', v_subject);
    --MIME header.
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'MIME-Version: 1.0' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: multipart/mixed; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' boundary= "' || 'SAUBHIK.SECBOUND' || '"' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Body
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: text/plain;' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' charset=US-ASCII' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, l_message || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Attachment01
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: application/octet-stream' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' filename="' || 'export.log' || '"' || --My filename
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    /* Writing the BLOL in chunks */
    WHILE l_pos < l_blob_len LOOP
    DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
    UTL_SMTP.write_raw_data(v_connection_handle,
    UTL_ENCODE.BASE64_ENCODE(l_buffer));
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    l_buffer := NULL;
    l_pos := l_pos + l_amount;
    END LOOP;
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Mail Attachment02
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Type: application/octet-stream' ||
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Disposition: attachment; ' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    ' filename="' || 'export1.log' || '"' || --My filename
    UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    'Content-Transfer-Encoding: base64' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    /* Writing the BLOL in chunks */
    WHILE l_pos2 < l_blob_len2 LOOP
    DBMS_LOB.READ(l_blob2, l_amount2, l_pos2, l_buffer2);
    UTL_SMTP.write_raw_data(v_connection_handle,
    UTL_ENCODE.BASE64_ENCODE(l_buffer2));
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    l_buffer2 := NULL;
    l_pos2 := l_pos2 + l_amount2;
    END LOOP;
    UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
    -- Close Email
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    '--' || 'SAUBHIK.SECBOUND' || '--' || UTL_TCP.CRLF);
    UTL_SMTP.WRITE_DATA(v_connection_handle,
    UTL_TCP.CRLF || '.' || UTL_TCP.CRLF);
    UTL_SMTP.CLOSE_DATA(v_connection_handle);
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
    DBMS_LOB.FREETEMPORARY(l_blob2);
    DBMS_LOB.FILECLOSE(v_src_loc2);
    EXCEPTION
    WHEN OTHERS THEN
    UTL_SMTP.QUIT(v_connection_handle);
    DBMS_LOB.FREETEMPORARY(l_blob);
    DBMS_LOB.FILECLOSE(v_src_loc);
    DBMS_LOB.FREETEMPORARY(l_blob2);
    DBMS_LOB.FILECLOSE(v_src_loc2);
    RAISE;
    END;
    PL/SQL procedure successfully completed.
    Edited by: SHAN2009 on May 11, 2011 1:05 PM

  • How to send multiple attachment in single mail

    i am using FM SO_NEW_DOCUMENT_ATT_SEND_API1 for sending mail.
    pls guide me how can i modify my code so that i can send multiple attachments

    Hi Manish,
    Check out the links below.
    E-mail multiple PDF attachments
    Send a Single Mail with Multiple Attachment
    Hope it helps.
    Regards,
    Amit
    *Always reward points for helpful answers
    Message was edited by:
            Amit Kumar

  • How to send multiple attachment s with a mail??

    Hi,
    How to send multiple attachments  with a mail??
    Situation::
    In my case i have 5 internal tables populated dynamically in the report.
    I want to send them in .TXT format as attachment with 1 mail.
    Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
    how we add multiple attachmants to table objin???
    thanks,
    deepak

    Hi Deepak,
    Please find the sample code for sending mail with multiple attachment.
    Report  ZPAN_02M                                        *
    REPORT  zpan_02m                                .
    *-MAIN DECLARATION----
    DATA: docdata    LIKE sodocchgi1,
          objpack    LIKE sopcklsti1 OCCURS  1 WITH HEADER LINE,
          objhead    LIKE solisti1   OCCURS  1 WITH HEADER LINE,
          objtxt     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
          objbin     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
          objhex     LIKE solix      OCCURS 10 WITH HEADER LINE,
          reclist    LIKE somlreci1  OCCURS  1 WITH HEADER LINE.
    *-OTHER DECLARATIONS----
    DATA : listobject   LIKE abaplist OCCURS  1 WITH HEADER LINE.
    DATA : tab_lines(3) TYPE n.
    DATA : att_type     LIKE soodk-objtp.
    *OBJBIN = '  |  '. APPEND OBJBIN.
    *---For simple attachment -
    DATA : BEGIN OF wi_data OCCURS 0,
             c1(10),
             c2(10),
           END OF wi_data.
    wi_data-c1 = 'Line 1'.   wi_data-c2 = 'Line 1'.  APPEND wi_data.
    wi_data-c1 = 'Line 2'.   wi_data-c2 = 'Line 2'.  APPEND wi_data.
    wi_data-c1 = 'Line 3'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 4'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 5'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 6'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 7'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 8'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 9'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 10'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 11'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 12'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 13'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 14'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 15'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 16'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 17'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 18'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 19'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 20'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 21'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 22'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 23'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 24'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 25'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    wi_data-c1 = 'Line 26'.   wi_data-c2 = 'Line 3'.  APPEND wi_data.
    class cl_abap_char_utilities definition load.
    constants:
        con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
        con_cret type c value cl_abap_char_utilities=>CR_LF,
        con_nwln type c value cl_abap_char_utilities=>NEWLINE.
    LOOP AT wi_data.
      CONCATENATE wi_data-c1 con_tab
                  wi_data-c2
                INTO objbin.
      condense objbin.
      CONCATENATE con_cret objbin INTO objbin.
      APPEND  objbin.
    ENDLOOP.
    *---CREATE MESSAGE : DOCDATA -
      Name
    docdata-obj_name  = 'TEST_ALI'.
      Subject
    docdata-obj_descr = 'Test including ALI/HTML Attachment'.
    *---CREATE MESSAGE : BODY -
    objtxt = 'Test Document.'.
    APPEND objtxt.
    objtxt = 'You will find an ALI/HTML attachment in this message.'.
    APPEND objtxt.
    objtxt = 'Have a nice day.'.
    APPEND objtxt.
    *-CREATE PACKING LIST-----TEXT--
    objpack-head_start = 1.
    DESCRIBE TABLE objtxt LINES tab_lines.
    READ     TABLE objtxt INDEX tab_lines.
    docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
    CLEAR objpack-transf_bin.
    objpack-head_start = 1.
    objpack-head_num   = 0.
    objpack-body_start = 1.
    objpack-body_num   = tab_lines.
    objpack-doc_type   = 'RAW'.
    APPEND objpack.
    *-CREATE PACKING LIST-----ATTACHMENT--
    att_type = 'XLS'.
    DESCRIBE TABLE objbin LINES tab_lines.
    READ     TABLE objbin INDEX tab_lines.
    objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
    objpack-transf_bin = 'X'.
    objpack-head_start = 1.
    objpack-head_num   = 0.
    objpack-body_start = 1.
    objpack-body_num   = tab_lines / 2.
    objpack-doc_type   = att_type.
    objpack-obj_name   = 'ATTACHMENT 1'.
    objpack-obj_descr  = 'Attached Document 1'.
    APPEND objpack.
    att_type = 'XLS'.
    objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
    objpack-transf_bin = 'X'.
    objpack-head_start = 14.
    objpack-head_num   = 14.
    objpack-body_start = 14.
    objpack-body_num   = tab_lines / 2.
    objpack-doc_type   = att_type.
    objpack-obj_name   = 'ATTACHMENT 2'.
    objpack-obj_descr  = 'Attached Document 2'.
    APPEND objpack.
    *-CREATE RECEIVER LIST----
    reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
    APPEND reclist.
    reclist-receiver = sy-uname.               reclist-rec_type = 'B'.
    APPEND reclist.
    *-SEND MESSAGE----
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data                     = docdata
        put_in_outbox                     = 'X'
        commit_work                       = 'X'
      IMPORTING
      SENT_TO_ALL                       =
      NEW_OBJECT_ID                     =
      TABLES
        packing_list                      = objpack
        object_header                     = objhead
        contents_bin                      = objbin
        contents_txt                      = objtxt
      CONTENTS_HEX                      = objhex
      OBJECT_PARA                       =
      OBJECT_PARB                       =
        receivers                         = reclist
       EXCEPTIONS
         too_many_receivers               = 1
         document_not_sent                = 2
         document_type_not_exist          = 3
         operation_no_authorization       = 4
         parameter_error                  = 5
         x_error                          = 6
         enqueue_error                    = 7
         OTHERS                           = 8.
    WAIT UP TO 2 SECONDS.
    SUBMIT rsconn01 WITH mode = 'INT'
                  WITH output = 'X'
                  AND RETURN.
    Hope this is enough for you...
    Enjoy SAP.
    Pankaj Singh.

  • Cant attach multiple files in mail

    How to attach multiple files in mail?? 

    Hey demo..
    When I create a document in 'Pages' app I can mail that file from 'Pages' app. But I cant attach multiple .doc file in one mail. For sending multiple files in a single mail I need to do several mails. Is there any system or 3rd party software through which I can attach multiple .doc files in one mail.
    Thanks in advance.

  • Query related to multiple attachments in mail adapter

    Hi,
    I have a query related to multiple attachments in receiver mail adapter.
    I have successfully configured mail related scenarios but now I have another requirement in which I have multiple source files in one directory and I want to send one mail for multiple files as mail attachment using receiver mail adapter. Can anybody help me how to achieve multiple attachments in reciever mail adapter.
    To clarify the requirement more let us take an example
    Ex: I have 5 input files in the source which I pick up using additional files option in the sender file adapter, now I want to send those 5 files into one mail with 5 attachments. Can anybody explain how 5 different payload will be sent as multiple attachments in one mail.
    For your information I used, options like "keep attachments" , some parameters in module processesors etcs...but not able to find out as how exactly it will be achieved.......I dont want to use BPM collect pattern for this.....
    Need your help on this issue. Please suggest the solution as how it can be achieved using receiver mail adapter.
    Thanks & Regards
    Prabhat

    Hi,
    I resolved the issue on my own. Thanks for your help and support.
    Thanks & Regards
    Prabhat

  • Multiple attachments in mail

    Hi,
    I have a requirement to attachment MULTIPLE files in mail . ie i have 2 reports have to be executed and results will have to be send thru single mail
    Can anybody give some info related to this .
    Thanks
    aRs

    Hi,
    look at the below blog ...
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    Regards
    Sudheer

  • Sending multiple photos in mail

    I read an old post that said it was not possible to send multiple photos in mail from the iPhone. Well, I have done it, but in a rather clunky fashion.
    I first made a new message to send, but left the To: address empty.
    I then went to the camera roll and selected one photo by holding my finger on it for a short time, long enough for the "Copy" option to pop up. I copied it.
    I returned to mail and pasted that photo into the message area.
    Returned to the camera roll and copied another photo
    Returned to the mail, entered 2 returns after the existing photo and pasted again.
    I then entered the recipients address. (For some reason the paste option would not appear if I entered the To: field first)
    This way you don't get the opportunity to make the photo sizes medium or small, but if the message is too large you are given the option of do that. It minimizes just enough of the photos to pass the size test, but it did work.
    This is clunky. Does anyone know of a better way to do it?
    Thanks, John Shanks

    You can select more than one photo at a time followed by selecting copy if you have aleady started composing a message and if not, you can select more than one at a time followed by selecting Share instead which will create a new email with each photo added as an attachment.

  • Sending Multiple attachements (PDF) in a single email

    Hello All,
    I came across below link but could not understand.
    How to send multiple attachements in single mail
    Any idea how i can send email with Multiple attachements (PDF format files). Thanks.

    Smart Form PDF Link
    http://help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
    http://sap.ionelburlacu.ro/sap0/sapsf001.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/16/a369b1800e4bdda978ee0fe3b7bd2c/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
    http://www.sap-basis-abap.com/sapsf001.htm
    http://www.sap-img.com/smartforms/smart-001.htm
    Rewards if useful................
    Minal

  • Multiple instances of Mail.app must be possible

    I've seen many questions regarding the possibility of running multiple instances of Mail.app as separate processes. There seems to be much good reason to be able to do so, i.e. separating work and private mail, and very little bad reason to do so (maybe some problems when doing upgrades or backups, but I'm not yet sure of this). It also seems that it should not be so hard to do.
    So far, using some web acquired wisdom, I've done the following:
    1. Duplicate mail.app:
    sudo ditto Mail.app WorkMail.app
    2. Rename the executable:
    mv /Applications/WorkMail.app/Contents/MacOS/Mail /Applications/WorkMail.app/Contents/MacOS/WorkMail
    3. Use Property List Editor to set the following values in/Applications/WorkMail.app/Contents/Info.plist (Apple-S to Save changes!):
    Root/CFBundleExecutable=WorkMail
    Root/CFBundleIdentifier=com.apple.workmail
    Root/CFBundleName=WorkMail
    Root/NSServices/0/NSPortName=WorkMail
    Root/NSServices/1/NSPortName=WorkMail
    Root/NSServices/2/NSPortName=WorkMail
    Root/UTExportedTypeDeclarations/0/UTTypeIdentifier=com.apple.workmail.emlx
    Root/UTExportedTypeDeclarations/1/UTTypeIdentifier=com.apple.workmail.emlx.part
    4. Create the following directories:
    mkdir ~/Library/WorkMail Downloads
    mkdir ~/Library/WorkMail
    4. Launch the 'new' application 'WorkMail'.
    5. Create mail accounts using the application's 'wizard'.
    Here is where the first problem is encountered. The new account directories and files are still created at ~/Library/Mail. Navigating to Mail->Preferences->Accounts->[account_name]->Advanced seems to offer the option to change the mail store account directory, but nothing can actually be changed here. So...
    6. Quit WorkMail.
    7. Move newly created account(s) directories (where [newaccountdirectory] is a directory named with the format: [mail_type]-[user]@[domain].[tld]@[pop].[domain].[tld]]) to the correct location:
    sudo mv ~/Library/Mail/[newaccountdirectory] ~/Library/WorkMail/
    8. Use Property List Editor to set the following values in ~/Library/Preferences/com.apple.workmail.plist (Apple-S to Save changes!):
    /Root/ActiveViewers/0/AttachedMailboxListExpandedItems/[0to_#_ofaccounts]/=~/Library/WorkMail/Mailboxes/...
    /Root/CurrentTransferMailboxPath=~/Library/WorkMail/Mailboxes/...
    /Root/MailAccounts/[0to_#_of_accounts]/AccountPath=~/Library/WorkMail/[new_accountdirectory]
    /Root/MailDownloadsPath=~/Library/WorkMail Downloads
    9. Relaunch WorkMail.
    Everything at this point seems to work okay, **BUT** when I launch Mail while WorkMail is launched, I find that I cannot navigate into any mail folders within Mail. I receive an error message indicating that a necessary directory is locked. It seems that the locking mechanism used by the application may be hard-coded to lock ~/Library/Mail, and both instances of the application continue to take this action when launched, making it impossible for both to work harmoniously at the same time. I will conduct more testing and experimentation, but I am not yet capable of editing the application itself. If anyone can take us this last step, I'm sure there are many who would also like to be able to take advantage of the potential functionality.
    Thanks for any input!
    Steven Stromer

    Hopefully, there is someone with a programming background who
    can take me and other who have posted similar questions through
    the final mile on this...
    Well, I do have a programming background, and I must say that it amazes me that someone might want to do what you did to “solve” a problem that IMO doesn’t exist.
    What exactly is it that you expect to accomplish by running multiple instances of Mail, and for which neither (1) organizing your mail using multiple mail accounts, custom mailboxes, rules, and/or smart mailboxes, nor (2) setting up separate user accounts, are acceptable solutions? I just don’t get it.
    I've seen many questions regarding the possibility of running multiple
    instances of Mail.app as separate processes.
    I haven’t. Could you please provide a link for such a question, preferably one asked by someone who knew how Mail and Mac OS X work, i.e. a link for a case where there really was such a need?
    There seems to be much good reason to be able to do so
    I know of no such reasons, neither good nor bad.
    i.e. separating work and private mail
    I don’t see how that’s a reason to want to run multiple instances of Mail. Could you please elaborate?
    Maybe if you tell us what exactly is the problem that you’re trying to solve, instead of focusing on a convoluted “solution” that doesn’t work, we could propose a solution that does...
    and very little bad reason to do so
    Well, if the fact that it’s so convoluted and doesn’t even work aren’t bad enough reasons, I don’t know what it is...
    It also seems that it should not be so hard to do.
    I wonder what makes you think so. It does certainly seem hard to me, so hard that I don’t even think it can be done without breaking something, if at all...

  • Fetch data from table and generate attachment than mail it.

    Hello Experts,
    From couple of day I am searching on Google for a better database procedure that will help me to get data from tables and generate attachment and mail it but i fail.
    My Scenario is:
    I have a query that will fetch almost 5000 records from database tables. Each record has almost 75 characters
    select a.location_code,
                   a.item_code,
                   b.description item_desc,
                   to_char(a.manufact_date,'ddMonyy')mfg,
                   to_char((a.manufact_date + nvl(b.expiry_period,0)),'ddMonyy')expr,
                   to_char((a.manufact_date + nvl(b.qurantine_period,0)),'ddMonyy')qrtn,
                   round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) days_elapsed,
                   a.closing_balance_posted quantity
              from wms_stock_current_balance_v a, wms_item_setup_mast b
             where a.closing_balance > 0
               and a.item_code = b.item_code
               and a.loc_type in ('RACKING','PICKING','QUICKA','BUNDLED')
               and nvl(b.qurantine_period,0) > 0
               and round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) <= 0
          order by a.item_code, a.location_code;
    Sample data of above query is
    LOCATION_CODE
    ITEM_CODE
    ITEM_DESC
    MFG
    Expiry
    Quarantine
    Days Elapse
    Quantity
    13DL2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    14DL0
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    23-Feb-10
    3-Apr-14
    7-Jun-13
    -119
    134
    14DL2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    23-Feb-10
    3-Apr-14
    7-Jun-13
    -119
    160
    14DR2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    23-Feb-10
    3-Apr-14
    7-Jun-13
    -119
    20
    14LL2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    17ER2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    17GL2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    17SL0
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    17-Feb-10
    28-Mar-14
    1-Jun-13
    -125
    64
    18QL0
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    23-Feb-10
    3-Apr-14
    7-Jun-13
    -119
    160
    19AR5
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    17-Feb-10
    28-Mar-14
    1-Jun-13
    -125
    160
    19DL1
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    19JR0
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    17-Feb-10
    28-Mar-14
    1-Jun-13
    -125
    60
    19TL1
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    20GR2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    40
    36FL3
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    18-Feb-10
    29-Mar-14
    2-Jun-13
    -124
    65
    19UR0
    000000000000000F0591
    COMFORT WHITE 24ML*300
    28-Oct-09
    28-Oct-11
    1-May-11
    -887
    1
    12SL1
    000000000000000F0593
    COMFORT PINK 24ML*300
    28-Oct-09
    28-Oct-11
    1-May-11
    -887
    42
    12SR1
    000000000000000F0593
    COMFORT PINK 24ML*300
    28-Oct-09
    28-Oct-11
    1-May-11
    -887
    42
    14OR1
    000000000000000F0593
    COMFORT PINK 24ML*300
    28-Oct-09
    28-Oct-11
    1-May-11
    -887
    8
    36EL4
    000000000000000F0594
    CLEAR HF DECRASE 5M*360
    14-Feb-10
    14-Feb-11
    12-Oct-10
    -1088
    14
    13VL1
    000000000000000F0595
    CLEAR COM SFT CRE 5*360
    8-Feb-10
    8-Feb-11
    6-Oct-10
    -1094
    160
    14ER0
    000000000000000F0595
    CLEAR COM SFT CRE 5*360
    8-Feb-10
    8-Feb-11
    6-Oct-10
    -1094
    105
    Database Info
    Oracle 10g
    Version 10.2.0.1.0

    Look at the sample code for generating a CSV file that I've just posted in response to a similar question:
    Re: How to execute a proc and spool files in a database job
    And the use the search button in this forum to find sample code for sending a CLOB as a plain/text e-mail attachment using UTL_SMTP.

Maybe you are looking for

  • How come my toolbars in word disappear each time I close it

    Every time I close Word my toolbars disappear. When I launch and go to View, Toolbars it shows them selected but they don't show on page. I have to uncheck and recheck to get them to appear again. Can anyone help?

  • Is it possible to install dsee7 into a solaris 10 sparse zone?

    hello all, i'm trying to install DSEE7 on a Sun T2000 (solaris 10 sparc) into a zone. The following command never returns: ldap1-root% /local/dsee7/bin/dsccsetup status DSCC Agent is not registered in Cacao DSCC Registry has not been created yet ldap

  • Running my first Servlet on TOMCAT - 10 duke dollars

    I am very new to Servlets. I am not creating a seperate context on Tomcat root to load the Servlet. I did the automatic installation of Tomcat 4.0.3 on windows NT available on <jakarta.apache.org/tomcat> I am going to load my servlet class in c:\<Tom

  • Help with sql query for multiple years

    Hello, I am new to SQL and am trying to perform a query that includes multiple years from 2005 to 2011. I was trying to enter the following query but received a message that said "Operand should contain 1 column(s)" SELECT * FROM `auto_2` WHERE `year

  • What happened to my synth texture package?

    when i upgraded the synth texture package isnt still part of my garage band packages.i tried re-downloading but it still isn't there. any insight?