Multiple attachments using UTL_MAIL?

Hi all,
Does anyone know if its possible to attach multiple documents to an email and send them using the UTL_MAIL package. I am able to send one attachment stored in the server but would like to attach multiple files if possible. Any help would be greatly appreciated.
Regards,
Ray

Similar Messages

Send email with multiple attachments using MS outlook

Hi,
Is it possible to send an email with multiple attachments using MS outlook. (Using activex)
Regards,
Neha

nehrnul wrote:
Hey thanks for the reply. I'll try that way also.
but currently my requirement is to send email using MS Outlook. And I found 1 solution using invoke node
Regards,
Neha
That' "requirement" sounds like it was written by someone who is trying to drive the design of the application. Without knowing your personal situation it's hard for me to say, but if I had to guess I would say the real requirement is to send an email with multiple attachements, and the person giving that requirement thought sending it through Outlook would be the best way. You should get clairification on what the real intend of that requirement is.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

How can I send multiple attachments using SO_DYNP_OBJECT_SEND?

Hi,
I hope someone can offer advice on my problem.
My requirement is to allow users to select one or more documents from an ALV grid. I am then required to send these documents to multiple users via email using function module SO_DYNP_OBJECT_SEND.
I can successfully send one document as an attachment. However, I can't seem to figure out how to send multiple documents as attachments using SO_DYNP_OBJECT_SEND. Is this done in the packing list?
Is there some way to tell the program where the 1st attachment ends and the 2nd attachment starts?
My attachment content is in i_att_cont.
CALL FUNCTION 'SO_DYNP_OBJECT_SEND'
    EXPORTING
      object_hd_change = l_title
      object_type      = 'RAW'
      raw_editor       = abap_true
      starting_at_x    = '5'
      starting_at_y    = '1'
      ending_at_x      = '120'
      ending_at_y      = '20'
      edit_title       = 'X'
      external_commit = abap_true
    TABLES
      objcont          = i_objcont
      rec_tab          = i_rec_tab
      packing_list     = i_packing_list
      att_cont         = i_att_cont
      exclude_fcode    = i_exclude_fcode
    EXCEPTIONS
      object_not_sent = 1
      owner_not_exist = 2
      parameter_error = 3
      OTHERS           = 4.
If you require more information, please let me know. I will be happy to provide it.
Thanks.

I finally found the solution.
The trick is to ensure you put the correct values in the body_start, body_num and objlen fields of the packing list.
Each additional attachment should start (body_start) at the end of the last attachment + 1.
The value for body_num is equal to the number of lines in the attachment being added.
And the objlen field is calculated by multiplying the number of lines in the attachent * 255.
Static data
   gs_packing_list-file_ext = lv_ext.
   gs_packing_list-transf_bin = 'X'.
   gs_packing_list-objla = sy-langu.
   gs_packing_list-objtp = 'EXT'.
   gs_packing_list-objdes = lv_filename.
   gs_packing_list-objnam = 'Attachment'.
   gs_packing_list-head_start = 1.
   gs_packing_list-head_num = 1.
Body Start
   CLEAR lv_count.
   DESCRIBE TABLE gt_temp_att_cont LINES lv_count.
   gs_packing_list-body_start = lv_count + 1.
Body Num + Object Length
   CLEAR lv_count.
   DESCRIBE TABLE gt_att_cont LINES lv_count.
   gs_packing_list-body_num = lv_count.
   gs_packing_list-objlen = lv_count * 255.
   APPEND gs_packing_list TO gt_packing_list.
Hopefully this helps some desperate soul in the future.

Send/Receive multiple attachments using SwA (no MTOM)

Hello all,
I would appreciate if someone can put me in the right direction about the following implementation:
- web service method able to receive multiple attachment using weblogic tools (wsdlc, jwsc) without MTOM.
I tried JAXRPC and JAXWS, starting from code and from wsdl, using bytearrayholder, DataHandler array ... without success.
Better solution for my own goal would be using JAXRPC and Array of attachments.
Actually I don't know what I can add again: I've done multiple tests and I cannot add all the used code/wsdl/build/... of course.
I'm using WLS 10.0 (p3)
I'm just a bit confused! So, I will thank if someone can suggest the right road and, in case, I'll post more details about the related test I've done.
Thanks,
Pepe

Hello all,
I would appreciate if someone can put me in the right direction about the following implementation:
- web service method able to receive multiple attachment using weblogic tools (wsdlc, jwsc) without MTOM.
I tried JAXRPC and JAXWS, starting from code and from wsdl, using bytearrayholder, DataHandler array ... without success.
Better solution for my own goal would be using JAXRPC and Array of attachments.
Actually I don't know what I can add again: I've done multiple tests and I cannot add all the used code/wsdl/build/... of course.
I'm using WLS 10.0 (p3)
I'm just a bit confused! So, I will thank if someone can suggest the right road and, in case, I'll post more details about the related test I've done.
Thanks,
Pepe

URGENT : Multiple Attachments using JavaMail

Hello ,
I'm trying to send multiple attachments to a single mailid. I have 3 text boxes in my JSP page which holds the file name that is selected . in the next page i retrieving the values of those filenames and sending it as attachment .
But when i do so , i'm getting NullPointeException when one of 2 file is choose . but when i choose 3 files to send , it is working fine . Can any one help pls,
Here is the code
public class Attachservlet extends HttpServlet{
     public void doPost(HttpServletRequest req,HttpServletResponse res) throws ServletException,IOException{
     String host="172.30.1.35";
     String full[]=new String[3];
     String part[]=new String[3];
     String fname[]=new String[3];
     String pname[]=new String[3];
     String ss[]=new String[3];
     String name[]=new String[3],conc="";
     int j,jj;
     String sender_email=req.getParameter("senderemail");
     String sender_name=req.getParameter("sendername");
     String receiver_email=req.getParameter("receiveremail");
     String receiver_name=req.getParameter("receivername");
     String sent_message=req.getParameter("area");
     PrintWriter out=res.getWriter();
     Properties props=System.getProperties();
     props.put("mail.smtp.host",host);
     Session session=Session.getDefaultInstance(props,null);
     MimeMessage message=new MimeMessage(session);
     try{
     for ( jj=0;jj<3;jj++){
     j=jj+1;
     name[jj]="filename"+j;
     pname[jj]="pname"+j;
     ss[jj]=req.getParameter(name[jj]);
     part[jj]=req.getParameter(pname[jj]);
     if(ss[jj].length()!=0){
     System.out.println("values is "+ss[jj] +"\n"+part[jj]);
     System.out.println("values is "+ss[jj] +"\n"+part[jj]);
     conc=conc+ss[jj]+",";
     System.out.println(conc);
     message.setFrom(new InternetAddress(sender_email,"Sumathi"));
     message.addRecipient(Message.RecipientType.TO,new InternetAddress(receiver_email));
     message.setSubject(receiver_name);
     BodyPart bodypart=new MimeBodyPart();
     bodypart.setText(sent_message);
     Multipart multi=new MimeMultipart();
     multi.addBodyPart(bodypart);
     bodypart = new MimeBodyPart();
     DataSource source=new FileDataSource("test.jsp");
     bodypart.setDataHandler(new DataHandler(source));
     bodypart.setFileName(part[jj]);
     multi.addBodyPart(bodypart);
     message.setContent(multi);
     Transport.send(message);
     res.sendRedirect("http://sumathi/Mail/Success.jsp");
     System.out.println("Message Sent");
     }catch(Exception e){
     System.err.println("An Exception has Arrised \t"+e);
     public void doGet(HttpServletRequest req,HttpServletResponse res)throws ServletException,IOException{
     doPost(req,res);
Any Help pls ,
Thanks in Advance !

OK,
Although you didn't post the stack trace from your NullPointer, my guess is that it's being thrown at this line:
if(ss[jj].length()!=0){
your ss[jj] variable is being assigned the value: req.getParameter(name[jj]); This value is null in the case when you have anything less that 3 parameters in your form.
You need to check for a null value at this point.

Redwood Cronacle: multiple attachments using rwmail

How can I get my script to send multiple files as attachments to a single email using rwmail, or is it even possible? If possible, what is the syntax?

I had tried that, but it looks like I just had the script formatted wrong for Windows. It works now. Thanks!

Multiple attachment using SO_NEW_DOCUMENT_ATT_SEND_API1

HI geeks,
          Can anyone pls tell me how to attach multiple files using function module SO_NEW_DOCUMENT_ATT_SEND_API1.
          I have seen example of multiple attachments using same file type.I mean 1 or more files are same type like PDF or Excel.
          But my requirement is i have to send multiple attachment,1 file as PDF and other three excel file.
          Can anyone pls let me know,if anyone done this already,
Thanks in advance
Srini.

Hi Srinivasn,
Please see the below code u need to follow. In the object pack table u might specified the number of lines per each attachement. At the same time u need to specify the document type as PDF or XLS. Please see the below code which is wrote for two attachments as xls. In your case one attachment should be PDF. This can be specified in the field
LT_OBJPACK-DOC_TYPE = 'PDF'.
IF NOT LT_ATT_TAB[] IS INITIAL AND
    NOT GV_ERR_REC IS INITIAL.
    DESCRIBE TABLE LT_OBJBIN LINES LV_TAB_LINES.
    LV_TAB_LINES = LV_TAB_LINES - GV_SUC_REC.
    READ TABLE LT_OBJBIN INDEX LV_TAB_LINES.
    LT_OBJPACK-DOC_SIZE =
   ( LV_TAB_LINES - 1 ) * 255 + STRLEN( LT_OBJBIN ).
    LT_OBJPACK-TRANSF_BIN = 'X'.
    LT_OBJPACK-HEAD_START = 1.
    LT_OBJPACK-HEAD_NUM = 0.
    LT_OBJPACK-BODY_START = 1.
    LT_OBJPACK-BODY_NUM = LV_TAB_LINES.
    LT_OBJPACK-DOC_TYPE = LC_XLS.
    LT_OBJPACK-OBJ_NAME = 'ATTACHMENT'.
    LT_OBJPACK-OBJ_DESCR = LV_ATTACH_NAME2(50).
    APPEND LT_OBJPACK.
ENDIF.                               " IF NOT lt_att_tab[] IS ...
File2 attachment for processed records.
IF NOT LT_ATT_TAB[] IS INITIAL AND
     NOT GV_SUC_REC IS INITIAL.
    CLEAR LT_OBJPACK.
    DESCRIBE TABLE LT_OBJBIN LINES LV_TAB_LINES.
    LV_TAB_LINES = LV_TAB_LINES - GV_ERR_REC.
    GV_ERR_REC = GV_ERR_REC + 1.
    READ TABLE LT_OBJBIN INDEX LV_TAB_LINES.
    LT_OBJPACK-DOC_SIZE =
   ( LV_TAB_LINES - 1 ) * 255 + STRLEN( LT_OBJBIN ).
    LT_OBJPACK-TRANSF_BIN = 'X'.
    LT_OBJPACK-HEAD_START = GV_ERR_REC.
    LT_OBJPACK-HEAD_NUM   = 0.
    LT_OBJPACK-BODY_START = GV_ERR_REC.
    LT_OBJPACK-BODY_NUM   = LV_TAB_LINES.
    LT_OBJPACK-DOC_TYPE   = LC_XLS.
    LT_OBJPACK-OBJ_NAME   = 'ATTACHMENT'(009).
    LT_OBJPACK-OBJ_DESCR = LV_ATTACH_NAME(50).
    APPEND LT_OBJPACK.
ENDIF.                               " IF NOT lt_att_tab[] IS ...
Thanks
IF NOT LT_ATT_TAB[] IS INITIAL AND
    NOT GV_ERR_REC IS INITIAL.
    DESCRIBE TABLE LT_OBJBIN LINES LV_TAB_LINES.
    LV_TAB_LINES = LV_TAB_LINES - GV_SUC_REC.
    READ TABLE LT_OBJBIN INDEX LV_TAB_LINES.
    LT_OBJPACK-DOC_SIZE =
   ( LV_TAB_LINES - 1 ) * 255 + STRLEN( LT_OBJBIN ).
    LT_OBJPACK-TRANSF_BIN = 'X'.
    LT_OBJPACK-HEAD_START = 1.
    LT_OBJPACK-HEAD_NUM = 0.
    LT_OBJPACK-BODY_START = 1.
    LT_OBJPACK-BODY_NUM = LV_TAB_LINES.
    LT_OBJPACK-DOC_TYPE = LC_XLS.
    LT_OBJPACK-OBJ_NAME = 'ATTACHMENT'.
    LT_OBJPACK-OBJ_DESCR = LV_ATTACH_NAME2(50).
    APPEND LT_OBJPACK.
ENDIF.                               " IF NOT lt_att_tab[] IS ...
File2 attachment for processed records.
IF NOT LT_ATT_TAB[] IS INITIAL AND
     NOT GV_SUC_REC IS INITIAL.
    CLEAR LT_OBJPACK.
    DESCRIBE TABLE LT_OBJBIN LINES LV_TAB_LINES.
    LV_TAB_LINES = LV_TAB_LINES - GV_ERR_REC.
    GV_ERR_REC = GV_ERR_REC + 1.
    READ TABLE LT_OBJBIN INDEX LV_TAB_LINES.
    LT_OBJPACK-DOC_SIZE =
   ( LV_TAB_LINES - 1 ) * 255 + STRLEN( LT_OBJBIN ).
    LT_OBJPACK-TRANSF_BIN = 'X'.
    LT_OBJPACK-HEAD_START = GV_ERR_REC.
    LT_OBJPACK-HEAD_NUM   = 0.
    LT_OBJPACK-BODY_START = GV_ERR_REC.
    LT_OBJPACK-BODY_NUM   = LV_TAB_LINES.
    LT_OBJPACK-DOC_TYPE   = LC_XLS.
    LT_OBJPACK-OBJ_NAME   = 'ATTACHMENT'(009).
    LT_OBJPACK-OBJ_DESCR = LV_ATTACH_NAME(50).
    APPEND LT_OBJPACK.
ENDIF.                               " IF NOT lt_att_tab[] IS ...
Venkat

How to send multiple attachments?

Sorry if this seems like an obvious question but can it be done? Do I need an extra app or helper?
Thanks in advance

Ernie,
I have had problems with sending some attachments to windows users.
i cant tell exactly what is causing it.
usually i am making .pages documents which i then export as PDFs.
many times windows users email me back that they cant even see the attached PDFs (not not open them, but cant even see them).
there seems to be some sort of bug. (yes, attach as windows friendly documents is selected).
some have suggested that attaching multiple attachments using the command click method might be at fault.
others have suggested that exporting to pdf might be a problem and the resulting pdf not always readable by windows users.
can you give any suggestion that might ensure windows users can always open my attached PDFs?
thanks

Send multiple email attachments using FM SO_NEW_DOCUMENT_ATT_SEND_API1.How?

Hi All,
I have a requirement to send email to an external ID for which I am using FM SO_NEW_DOCUMENT_ATT_SEND_API1.Can anyone give a sample code to send multiple excel attachments using this function module.
Points would be rewarded.
Thanks
Archana.

Check the Thread,,
Re: more than 1 attachements/sheets in SO_DOCUMENT_SEND_API1

Multiple attachments in single mail using XML publisher bursting

Hi all
I am sending the PDF generated to a particular mail recipient using the bursting options.
There is requirement in which I have to attach two different PDF's to the mail. These multiple attachments should go in a single mail. Please let me know how we can achieve this.
Thanks in adv,
Srini
Edited by: 796646 on Mar 4, 2011 2:35 PM

Suresh,
just copy your question and paste it in search box.. press enter
there are too many posts already on this.
still a little help for you, with explanation:
[code snipet with documentation|http://wiki.sdn.sap.com/wiki/display/Snippets/MultipleAttachmentsExplanation]

Iam unable to send multiple attachments with a mail using JavaMail?

Hai to all,
Iam unable to send multiple attachments with a email,see
iam have succeeded in sending one attachment with a email.
when iam tring to add two or more attachments to a mail,
it is giving a Exception like this:
javax.mail.MessagingException: IOException while sending message;
nested exception is:
java.io.IOException: No content
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:577)
at javax.mail.Transport.send0(Transport.java:151)
at javax.mail.Transport.send(Transport.java:80)
at AttachFilesModified.sendMail(AttachFilesModified.java:185)
at AttachFilesModified.main(AttachFilesModified.java:43)
this is my code snipnet:
BodyPart messageBodyPart = new MimeBodyPart();
Multipart multipart = new MimeMultipart();
if(body != null)
messageBodyPart.setText(body);
multipart.addBodyPart(messageBodyPart);
/*if(attachments != null)
for(int i = 0; i < attachments.length; i++)
String filename="D:\\nagaraju\\apachi\\axis-bin-1_3.zip";
     //String s[]=filename.split("\\");
     //System.out.println(s);
          //String s1=s[1];
          //String filename1=s[s.length-1];
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(filename);
     messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(filename);
multipart.addBodyPart(messageBodyPart);
     //second file attaching
     /*String filename1="C:\\nagadoc.txt";
     BodyPart messageBodyPart1=new MimeBodyPart();
     DataSource source1=new FileDataSource(filename1);
     messageBodyPart.setDataHandler(new DataHandler(source1));
     messageBodyPart.setFileName(filename1);
     multipart.addBodyPart(messageBodyPart1);
mess.setContent(multipart);
Address[] allRecips = mess.getAllRecipients();
if(toStdOut)
System.out.println("done.");
//System.out.println("Sending message (\"" + mess.getSubject().substring(0,10) + "...\") to :");
System.out.println("Sending message................");
for(int i = 0; i < allRecips.length; i++)
System.out.print(allRecips[i] + ";");
System.out.println("...");
Transport.send(mess);
if(toStdOut)
System.out.println("done.");
return 0;
What's wrng with that code snipnet?
Nagaraju G.

This works fine with me, try it or compare it if you want.
public void sendEmail( String from, String to,
String subject, String body) {
fMailServerConfig.put("mail.smtp.host", " <<mail server>>");
Session session = Session.getDefaultInstance( fMailServerConfig, null );
MimeMessage message = new MimeMessage( session );
try {
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO,
new InternetAddress(to));
message.setSubject( subject);
message.setText( body);
//Adds Attechment:
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here are my attachments");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
//first attachment
DataSource source = new FileDataSource("C:\\img1.jpg");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("C:\\Telnor1.jpg");
multipart.addBodyPart(messageBodyPart);
//Second attachment
DataSource source2 = new FileDataSource("C:\\img2.jpg");
messageBodyPart.setDataHandler(new DataHandler(source2));
messageBodyPart.setFileName("C:\\Telnor2.jpg");
multipart.addBodyPart(messageBodyPart);
//etc...
message.setContent(multipart);
Transport.send( message );
}catch (MessagingException e){
System.err.println("Cant send mail. " + e);
The error on your code might be:
BodyPart messageBodyPart1=new MimeBodyPart();
DataSource source1=new FileDataSource(filename1);
messageBodyPart.setDataHandler(new DataHandler(source1));
messageBodyPart.setFileName(filename1);
multipart.addBodyPart(messageBodyPart1);
You don't need to create a new BodyPart, and apart from that you'r seting values on "messageBodyPart" but adding "messageBodyPart1" to your multipart :P
Well see u and have a good one!
p.s. i know it's a little late from the day you posted, but at least it might help somebody else :D .

How to attach multiple files in UTL_MAIL.SEND_ATTACH_VARCHAR2 method

Hi all ,
I had written a pl/sql where it will write multiple csvs i.e. a.csv,b.csv,c.csv,d.csv to a location using UTL_FILE to reports folder .
How do i attach a.csv,b.csv,c.csv,d.csv into a single mail ??
UTL_MAIL.send_attach_raw (sender => '[email protected]',
recipients => 'recepient.com.sg',
subject => 'Reports',
MESSAGE => 'Reports are attached above',
mime_type => 'text/html; charset=UTF8',
attachment => a.csv,
att_inline => FALSE,
att_filename => file1
Edited by: 907812 on 12-Jan-2012 23:03
Edited by: 907812 on 12-Jan-2012 23:03
Edited by: 907812 on 12-Jan-2012 23:04
Edited by: 907812 on 12-Jan-2012 23:04

UTL_MAIL does not work like that - you pointing to an external file and telling it to grab it and attached it to your e-mail.
If you refer to the manual, the attachment parameter specifies it must contain the contents of the file.
So your code needs to open the file. Your code needs to read the contents of the file. Your code needs to close the file. Your code needs to supply the contents text to UTL_MAIL via the attachment parameter.
And as there is only a single attachment parameter, only a single file's contents can be supplied as attachment.
Multiple attachments? Then you need to do what UTL_MAIL does. You need to write code that creates a valid e-mail Mime body. The Mime body must allow for multiple attachment. The Mime body needs to be delivered as an e-mail via the UTL_SMTP package.

Sending email with multiple attachments

Hi forum,
I am able to send email with a single attachment using maildemo.sql from: http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
But now I am trying to send email with more than 1 attachment and it does not work. My code that calls the above mentioned package is as follows:
<code>
PROCEDURE send (
psender VARCHAR2,
precipients VARCHAR2,
pcc VARCHAR2,
pbcc VARCHAR2,
psubject VARCHAR2,
pmessage VARCHAR2,
pnumattach NUMBER) -- The number of attachments that need to be sent
IS
p_blob BLOB;
p_filename VARCHAR2(200);
p_filetype VARCHAR2(200);
p_currSeq NUMBER;
conn utl_smtp.CONNECTION;
i NUMBER;
j NUMBER;
len NUMBER;
BEGIN
IF pnumattach > 1
THEN
conn := SEND_EMAIL_HELPER.begin_mail(
          sender => psender,
          recipients => precipients,
          subject => psubject,
          mime_type => send_email_helper.MULTIPART_MIME_TYPE);
j := 0;
SELECT seq_attach_transact_id.CURRVAL INTO p_currSeq FROM dual; -- seq_attach_transact_id is a primary key that identifies every single attachment in the table
WHILE (j < pnumattach) LOOP
p_currSeq := p_currSeq - j;
SELECT blob_content INTO p_blob FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT name INTO p_filename FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT mime_type INTO p_filetype FROM wwdoc_document WHERE transaction_id = p_currSeq;
SEND_EMAIL_HELPER.begin_attachment(
conn => conn,
mime_type => p_filetype,
inline => TRUE,
filename => p_filename,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(p_blob);
WHILE (i < len) LOOP
IF(i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH;
END LOOP;
SEND_EMAIL_HELPER.end_attachment(conn => conn);
END LOOP;
SEND_EMAIL_HELPER.attach_text(
conn => conn,
data => pmessage,
mime_type => 'text/html');
SEND_EMAIL_HELPER.end_mail( conn => conn );
ELSE
utl_mail.send(psender,precipients,pcc,pbcc,psubject,pmessage);
END IF;
END send;
</code>
Can anyone please tell me where am i going wrong.
Message was edited by:
Monk

The easiest is to send an e-mail with multiple attachments to yourself and then view the message in raw to see how it is formatted - how the boundaries work. what the boundary headers are, etc.
Then you use that as a template for your PL/SQL code to generate a MIME body for an e-mail that has multiple attachments.
To debug.. have your PL/SQL code send sample e-mails with multiple attachment to your account, view it in raw format and compare that to the original format you've based your template on.
And none of this is really a PL/SQL issue.. it is all about formatting a valid MIME message for an e-mail.

How to handle Multiple attachments in sender Mail Adapter

Hi,
In our requirement is mutiple documents send through mail adapter, In custom java module we read the each document details and do it bussiness process. But now i am not able to read the multiple files at a time. we are able to read single file only. So plz give the solution for that.
1) How to send multiple attachments(like word, PDF, JPG etc..) using mail apapter.
2) How to read multiple attachments in custom java module.
Thanks & Regards
Vijay

Hi Vijay,
Go through this weblog this explains steps to multile attachments.
/people/sravya.talanki2/blog/2006/01/12/xi-triggering-e-mails-with-multiple-attachments--problems
Regards,
Ashwin.

How can we send multiple attachments in a mail from iPad 2

Hi,
I am using a ipad2. I want to know how we can send multiple attachments through mail from iPad. I did not find any option of doing this. Is there a way to do this.
Regards,
Satyabrat

You can't do it natively on the iPad (unless you just want to send up to 5 photos from the Photos app). I use the GoodReader app which supports quite a few document/file types (e.g. PDF, Excel, Word, pictures), and from that I can select multiple files (including different types) and attach them to the same email.

Multiple attachments using UTL_MAIL?

Similar Messages

Maybe you are looking for