Multiple AX's on the same Wired Network

Need a little advice.
I have 6 buildings on my campus, all wired via ethernet. I have a single AX (identical model) installed in each building. When people travel from building to building they have to connect to that buildings AX. Is it possible to have all of the AX's act as 1 network so that the users do not have to re-connect when roaming between buildings? Would it be as simple as having the same network name and password on each AX?
Thanks for the information.

hgreer71, Welcome to the discussion area!
Is it possible to have all of the AX's act as 1 network so that the users do not have to re-connect when roaming between buildings? Would it be as simple as having the same network name and password on each AX?
Yes and yes.

Similar Messages

Multiple Apple TVs on the same network

I teach at a school and have used an Apple TV in conjunction with my iPad for presentations. I find it invaluable. Other teachers at my school would like to do the same, but I'm told by our tech support that multiple Apple TVs on the same network cause problems. When I ask them what problems, they aren't sure. They just tell me that other school have experienced problems. Other than a wifi bandwidth problem, I can't imagine what kind of problem it would be. A collegue of mine wants to jump onboard but desn't want to make waves. Does anyone know of any problems?

I have two Apple TV's, one in the living room and one in the bedroom... however, the living room is the only one that my iphone Remote APP is connecting with... I've named/tagged the two ATV's hoping that the Remote APP would provide me the option on which one to control, but it doesn't....
I've confirmed that home sharing is "on" with in all devices "settings"...
Any suggestions?

Can I use multiple sa-ns500 on the same network?

Is it possible to use multiple sa-ns500 speakers on the same network? they seem to want to have the same name on the network and therefore only 1 will connect at a time? Can I rename one somehow? Thanks!

Hello Brian,
Welcome to Sony Community.
Please check for the Secure Link option in the Home Theater System or A/V Receiver. This will help isolate the connection to the different Network speakers.
Yes, you can use multiple Network speakers on the same home network.
You can change the Device name using the Setting screen on the browser.
Follow the steps mentioned on the page # 34 and 35 of the User’s manual to start up the browser of the Network speakers and change the Device name.
If my post answers your question, please mark it as an "Accepted Solution."

Multiple production clusters on the same network? just change UDP port?

If I want multiple production clusters on the same network do I just make sure each cluster is on it's own multicast port? or are other changes required?
Thanks,
Andrew

Hi Andrew,
I think to be safe it would be best to use a different address and port.
-Dave

Is it possible to have multiple time machines on the same password protected network?

is it possible to have multiple time machines on the same password protected network? any insight would be helpful thanks

Youshould set one of them up to extend the wireless network. That one would not need an Ethernet connection and would allow your network to cover a broader area.

E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

Keychain Access: Adding multiple Certificates, signed by the same CA

Hello, Community.
I have recently posted my request for help in this thread:
http://discussions.apple.com/thread.jspa?messageID=10448884
Now, I am facing a new problem: I wish to add a new Certificate to the Keychain, but whenever I try, it tells me the item exists, and does not add it to the Keychain. It adds the keys perfectly fine, both public and private, but not the Certificate.
What can I do to have multiple Certificates, signed by the same CA.
I cannot add them to my Keychain, so that will be of no help. And I have tried to create every Certificate anew in the same Keychain, but this will not work, either. I created they Certificates and exported them before I went on to the next and they are now on my desktop. This is very inconvenient, as the keychain is distributed over a network as a shared Keychain and resides in a Snow Leopard Server (Domestic version, not Snow Leopard Server). Our business is one day behind, but since it is now weekend, I hope to get this issue resolved by Monday morning, send out the e-mails we should have and update our register with sales.
Could I please have some advice?
Also, if this topic is handled in full in another thread, please post the links, so I can read up on this topic and try to find a solution.
Thank you for your time.
Kashidom Nenakh
Mantha Designs incorporated
http://www.manthadesigns.net
[email protected]

http://www.isi.edu/~brian/security/kerberos.html

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

How do I use multiple local workspaces for the same website in VS2013?

For quite some time I've been using VS2010 with multiple workspaces mapped from the same TFS branch to test different variants of a website in parallel. The internal web server (Cassini) seems quite happy to run multiple versions and simply maps a new port
number for the second and subsequent instances that start up.
We are now looking to move to VS2013, so have to use IISExpress since the 'internal' web server is no longer provided.
How do I configure things so that if I open a single workspace, IISExpress runs against that workspace using the default port number (specified in the solution), but if I open a second instance in a different workspace it correctly uses a new port number
and working folder. Do I need to invoke IISExpress using the command line (presumably from each workspace) and specify the relevant defaults or is there some way to enter this in the local config file for IISExpress?
My initial attempt at editing to config file resulted in the 2nd and subsequent instance using the same physicalfolder as the first instance, presumably because the speficied site name and port number are the same!

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Based on your description, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
or IIS forums: http://forums.iis.net/ for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
Otherwise your iPad will not be able "talk" to your printer.

How to connect 2 apple TV to the same wireless network?

Hi,
Can somebody please help me shed some light here on how to connect 2 ATV to the same wireless network? My first ATV connected to the network just fine and syncing with my itunes, however the 2nd ATV keeps getting problem connecting to the network everytime I tried to connect to the network. It detected my home network on Linksys router just fine, but it wont connect to it.
Hope someone can help me out here... Thanks peeps...

Hm ive make sure all the password and everything is correct and yet it wont connect. Keeps getting the problems connecting to the network, please check your setttings.

HT3819 Home Share issue: I have a Mac and Apple TV. Both are log into the same Wifi network and the same iTunes account (I can view purchased movies on AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers. Itunes sidebar-no

Has anyone else found solution to Apple devices not 'seeing' each other on Home Share? I have a Macbook Air (new Nov'12) and Apple TV (new Dec'12). Software updated on both. Both are logged into the same Wifi network and the same iTunes account (I can view movies purchased from iTunes on my AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers... and ... Itunes sidebar does not have a 'Shared' area at all. Help please as without this functionality, my Apple TV only provides portal to purchased (i.e. Netflix,...) content which I can get from Wii or Xbox.
I have already tried the following without success:
1. Homeshare DID work the first day after I setup Apple TV... but the next day it has not worked since then.
2. Powered off 30 sec then re-started (Apple TV & Macbook & iTunes login)
3. Checked Firewall settings per Home Sharing troubleshooting guide (correct settings)
4. Turning on Photostream in iPhoto and selecting iPhoto within iTunes and then checking to see if Photostream shows anything on AppleTV (it shows 'on' for my iTunes account but 'Zero' pictures found ... despite the >3,000 pictures showing avail in iTunes).
I also have 'Remote" app on my iPhone 4, with Home Sharing turned on (same Wifi network)... it has a very similar message as the Apple TV and same result that despite all devices having HomeShare 'on' they cannot see each other: "Remote will automatically find the iTunes libraries and Apple TVs that have Home Sharing turned on using the account xxxx (it lists my correct itunes account name)."

I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

How to load multiple HTML5 canvas on the same page (the proper method)

Hi,
I've been struggling to load multiple canvas animations on the same page. At the beggining I thought that exporting the movies with different namespaces and reloading the libraries in a sequential flow might work, but it doesn't. It always loads just the last animation loaded. More info here: Coding challenge: what am I doing wrong?
Here is a sample of what I'm doing:
1st: Publish two flash movies with custom namespaces for "lib" set in the "publish settings": "libFirst" and "libSecond".
2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and the other one called "secondCanvas"
3rd: Edit the javascript like this:
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsFirst = createjsFirst||{};
            var createjs = createjsFirst;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/first.js"></script>
        <script>
            function initFirstAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("firstCanvas");
                exportRoot = new libFirst.first();
                stage = new createjsFirst.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                createjsFirst.Ticker.addEventListener("tick", stage);
        </script>
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsSecond = createjsSecond||{};
            var createjs = createjsSecond;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/second.js"></script>
        <script>
            function initSecondAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("secondCanvas");
                exportRoot = new libSecond.second();
                stage = new createjsSecond.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                createjsSecond.Ticker.addEventListener("tick", stage);
        </script>
<body onload="initFirstAnimation(); initSecondAnimation();">
Could someone please reply with the best practice on how to do this? If possible, without the need to reload all the libraries...
If I only need to show one flash movie at a time, would it be more efficient to cut & paste the canvas tag using jQuery in the DOM and reloading a different lib on it?
Many thanks!
#flash #reborn

I was able to fix it. At the end, it was easier than I thought. Just have to publish using a different "lib" namespace for each movie, load all the scripts at the end of the <body> and then add the following to the onload or ready events:
$(document).ready(function () {
        var canvas, stage, exportRoot;
        // First movie
        canvas = document.getElementById("firstCanvas");
        exportRoot = new libFirst.first();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libFirst.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Second movie
        canvas = document.getElementById("secondCanvas");
        exportRoot = new libSecond.second();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libSecond.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Third movie
        canvas = dument.getElementById("thirdCanvas");
        exportRoot = new libThird.third();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libThird.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);

Can multiple people post on the same shared photo stream?

Is there a way to have multiple people post on the same shared photo stream?
My cousin would like to have a single shared photo stream where we can both post photos on it and comment, instead of having two separate shared photo streams.
We think that there should be an option for the album creator to give access to anyone he/she shares it with to enable them to also post pics on the same stream.

The only link I have is to manage your team account http://forums.adobe.com/thread/1460939?tstart=0
The only Adobe program/process for team work that I know of is Adobe Anywhere, but that requires a very different process
Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html
http://www.creativeimpatience.com/adobe-anywhere-enterprise-solution/

Can multiple APEX application use the same parsing schema?

Hi,
I have 4.2 APEX thru pl/sql Gatewat, 11gr2 DB and using theme 24.
Due to the APEX limitation for version control I would be splitting 1 big ERP applications into 24 different APEX applications and each application would be considered as 1 unit for version control.
I have about 800 tables and I would assume that all of these would need to be stored in 1 schema since a lot of these table are linked thru FK.
Can I have multiple APEX APPS using the same parsing schema? or is there a better way to do this?
Thanks in advance!

Hi,
Multiple applications can have same (one) parsing schema.
You can test that on e.g. apex.oracle.com, where normally you have only one schema and you create multiple applications and all use that same schema.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai
Edited by: jarola on Jan 28, 2013 7:15 PM

Multiple AX's on the same Wired Network

Similar Messages

Maybe you are looking for