Multiple backend scenario
HI,
could anyone send me the notes 640570 and 853430 as pdf because i have no access to those notes. Thanks.
Regards,
Thomas Strehle
Hi
i will forward to your email id provided your email adresss to me
Regards
Rao
Similar Messages
-
SAP CRM Multiple Backend Scenario with Solution Manager
Dear Experts,
We are implementing CRM Middleware - Multiple Backend Scenario (MEP / MBE Concept) in our client landscape for SAP CRM on HANA (Ehp3)
set-up.
And If any one of you have already implemented MEP Scenario in the SAP CRM Landscape, Could you please help us to provide with the Configuration Steps / Documents, so that we can proceed further.
Below are the following Queries:
For Customizing Adapter Object:
1) Does MEP Concept support the Customizing Adapter object to download from more than one ECC System to single CRM System.
If Yes, Could you please provide the Configuration steps or Procedure to download the customizing data.
For Master Adapter Object:
2) The Adapter objects for Master Data like Customer and Materials are technically supported under MEP for the data exchange.
However, is it possible to download the Equipments Master Data from more than one ECC System to single CRM System?
If Yes, Could you please provide the steps or Procedure to download the Equipments Master Data.
And please provide if you have done the Solution Manager Configuration mapping for MEP Scenario, which is required for the maintenance and transfer of customizing mappings to CRM and Mapbox.
Thanks,
Mohanram.Hi Alagammai,
We are also implementing CRM Middleware - Multiple Backend Scenario (MEP / MBE Concept) in our client landscape for SAP CRM on HANA (Ehp3) set-up.
Required some Information on the below Query.
For Customizing Adapter Object:
1) Does MEP Concept support the Customizing Adapter object to download from more than one ECC System to single CRM System.
If Yes, Could you please provide the Configuration steps or Procedure to download the customizing data.
For Master Adapter Object:
2) The Adapter objects for Master Data like Customer and Materials are technically supported under MEP for the data exchange.
However, is it possible to download the Equipments Master Data from more than one ECC System to single CRM System?
If Yes, Could you please provide the steps or Procedure to download the Equipments Master Data.
And please provide if you have done the Solution Manager Configuration mapping for MEP Scenario, which is required for the maintenance and transfer of customizing mappings to CRM and Mapbox.
Thanks,
Mohanram.
7829055537 -
Role of clients in CRM Multiple Backend Scenario
Does the CRM Multiple Backend Scenario only apply to a single client pointed to multiple CRM or ERP systems.
All the relevant tables are client dependent in CRM 2007 and the client independent ones use logical destinations which can easily be pointed todifferent clients.
We want to point different clients on a CRM or ERP system to multiple back ends, but each client will only have a single client that it points to.
For example
CRM (dev) client 100 is connected to ERP (sandbox) client 100
CRM (dev) client 200 is connected to ERP (dev) client 100
CRM (test) client 100 is connected to ERP (qa) client 100
CRM (qa) client 100 is connected to ERP (qa) client 200
This will only be in the development and qa systems. Production will be a single system and client on each side.
Regards,
Aubrey SmithAubrey,
Development will happen in only one client system. This can later be moved to Quality and further to production. All customization will also be moved same way. It may also happen that your development is cross client so if you do development on 100 , it will be available on 200 client as well.
Regards,
Harshit -
Multiple Backend Scenario with SolMan
Hi Gurus,
i need the information about the multiple backend scenarios implementation with SolMan. In the Note 1084315 - Consulting: Information about the multiple backend scenario, there is the Way decribed:
You can find documentation about this in Solution Manager under 'Basic Settings for SAP CRM' -> 'Multiple Systems Exchange Projects: Multiple Backends'.
But i can not find it in Solution Manager, where can it be?
Thanks and Regards,
StefanHi Alagammai,
We are also implementing CRM Middleware - Multiple Backend Scenario (MEP / MBE Concept) in our client landscape for SAP CRM on HANA (Ehp3) set-up.
Required some Information on the below Query.
For Customizing Adapter Object:
1) Does MEP Concept support the Customizing Adapter object to download from more than one ECC System to single CRM System.
If Yes, Could you please provide the Configuration steps or Procedure to download the customizing data.
For Master Adapter Object:
2) The Adapter objects for Master Data like Customer and Materials are technically supported under MEP for the data exchange.
However, is it possible to download the Equipments Master Data from more than one ECC System to single CRM System?
If Yes, Could you please provide the steps or Procedure to download the Equipments Master Data.
And please provide if you have done the Solution Manager Configuration mapping for MEP Scenario, which is required for the maintenance and transfer of customizing mappings to CRM and Mapbox.
Thanks,
Mohanram.
7829055537 -
ABAP Mapbox CRM 7.0 for a Multiple Backend Scenario
Dear SDN community members,
In our project we have one CRM system connected to three ERPs. For this reason we try to use the ABAP MAPBOX functionality for the customizing and master data mapping. In the process of the initial download of CUSTOMER_MAIN object we take the following error :No table entry found: 'CUST_REL'/'CRTCLNT100', Service that caused the error: SMW3_OUTBOUNDADP_CALLADAPTERS. As we have read on the CRM 7.0 the ABAP MAPBOX is part of the ABAP stack of CRM and for this reason we do not create RFC connection for the MAPBOX. Is this correct ?
Does anyone have any idea about the problem above ? Also is there any technical documentation for the customizing steps that are needed for the scenario of multiple backend systems ?
Thanks in advance,
John SyrigosHi John, our project is facing the same requirement, multiple ECC 5.0/6.0 back ends. Were you successful in the integration and MapBox activation and can you give me any lessons learned in your experience?
thanks
Glenn
Edited by: glstover on Apr 18, 2011 7:59 PM -
How UWL support substitution in multiple backend scenario?
Hello experts,
We are using UWL with multiple backend - 3 ERPs. If I define a substitution rule in portal, I think this rule will be replicated in all the 3 ERPs otherwise my substitute in the backend could not get my work items in UWL. Is it correct? Do you have more information about this topic?
thank you for your help in advance!
Best Regards,
HuaiyangDear Huaiyang,
You are right, if you have multiple systems connected to UWL , then substitution set via UWL has been entered in all systems.
However it is not possible to restrict substition settings to a particular system. If the user set a substitution via UWL, then it will be set in all connected system as well. UWL set the substitution at backend level in the normal substituion table HRUS_D2.
Hope this helps.
BR
Richard -
Multiple Backends, e-Sourcing
Hi all, we have positioned e-Sourcing at a client that now intends to integrate to multiple backends. With the SAP Consulting Note (OSS), we can interface e-Sourcing to a single backend. Does anyone have any experience with integrating to multiple backends? Some of our initial white board sessions to resolve this include:
1. Writing some code/scripts or mapping with PI/XI to mimic the SRM BADI "determine logical system" to route the contract back to the appropriate R3.
2. Using the Portal function "Composite Application Framework" to facilitate the selection of appropriate backend systems.
If anyone has experience or comments, please provide details or point me to some documentation to support this effort. I assume someone has addressed this previously. thank you.
regards,
garyHi Gary
We are also looking at implementing the Multiple Backend scenarios for SAp E-Sourcing integration with SAP R/3
We understand that SAP will offer this as an interface from version 6.0 onwards, however this release as of now has been cancelled and are now looking at SAp E-Sourcing version 5.1 that will have the Multiple Backend integration
Just to add to your views, we can still looking at using the splitter functionality in SAP XI to help push the messages to the respective multiple backends, however we need to create fresh Interfaces that will be used to Push from SAP E-Sourcing to SAP R/3 XML messages routed through XI
We have to take these as development initiatives and address the multiple backend integration
However, if you are able to hold on till version 5.1 is released in Q2, 2008, you need not develop these interfaces, incase its the project requirement at the moment, then you can go ahead and develop these interfaces in XI
Incase you can share some information on the Single Backend integration, please feel free to send them to [email protected]
Let me know if you need more information on your subject,and the decision you finally take to address your issue
Regards
Tridip
SAP SRM Consultant
+91 9902764700 -
SRM 7.0 extended classic possible for multiple backends?
Hi all,
I know that SRM 7.0 can be set up for multiple backends in the classic scenario.
And i assume it is also possible to do so in the EXTENDED classic scenario.
Could somebody please confrim that this is possible?
Has somesone already set up this landscape and any recommendations, advice, hits, do's and dont's?
Cheers
UlrikeHi Ulrike,
SRM 7.0 supports ECS for multiple backends. We are using it now. -
Multiple Backend for APO system
hi Experts,
I have a scenario to connect multiple backend (ERP system Ehp4) to the APO system (7.0 SP 03). The ERP development system & ERP support system will be connected to one APO system which will be used for development.
the query is,
1. will there be any problem in this kind of landscape (for txn data, master data & transports)
2. does SAP give any standard feature to connect this way
3. how can the data from one APO identified uniquely to be sent to different ERP systems.
4. generally what are the difficulties in this scenario?
Thanking you in anticipation.
Regards,
VasudevanHi,
Definitely APO can be connected to multiple R/3 systems.
1. You need to maintain the BSG group to differentiate the 2 R/3 systems. Please read SAP help on BSG.
http://help.sap.com/saphelp_scm50/helpdata/en/ba/737b3704716066e10000009b38f889/frameset.htm
The BSG helps to differentiate master data between the 2 or more R/3 systems
2. CIF setting (CFM1 & CFM2) in R/3 & publication setting (/n/SAPAPO/CP1) in APO is critical for data transfer between the right systems (R/3 & APO).
APO identifies from Publicaiton setting, the R/3 system where the data is to be transferred for a particluar location (same location is not expected to be in both the R/3 system)
3. For issue related to the BUoM, you can maintain the conversion factor between the BUoM in the material master in both the R/3 systems.
We have similar scenario, where in 2 R/3 systems having same materials codes have different BuoM. We maintain the converstion factor in alternative UoM to avoid UoM issues. We are not facing much issues expect for Sales order, where we get difference in delta report. we just transfer the blocked Queues to APO.
hope this helps.
Regards,
Nawanit -
UoM issue due to multiple backend systems
Hi All,
We have multiple backend systems hooked up with the SRM system. One issue that we have is that many of the UoMs are different in the backend systems. For example, for THOUSANDS, we have TH and THO in different systems. As part of optimization we intend to include only 1 entry per UoM in SRM box.
The problem is if we put TH as the unit, then if it is chosen by a user linked to the backend system that does not have this Commercial unit, then the Shopping Cart fails when trying to create a follow-on document.
Any advice how we can get this resolved will be greatly appreciated.
Best Regards
GauravHi Gaurav,
Common problem when using multiple back-ends, which can be resolved rather easily. The best way to solve this is by a business change. That isu2026. synchronize the use of the UoMu2019s throughout the organization. This would be the most elegant solution. All back-ends will then have the same valueu2019s in their respective CUNI tables.
Off course the feasibility of this will depend on your organizational structure and the hitting the u2018right stringsu2019 in order to get every one to understand the importance of this.
As a back-up an other solution would be to create a Z-table which will translate the UoM used in the SRM system to the corresponding UoM in the respective back-endsu2026.. The table will have three columns. u2018SRM UoMu2019 u2013 u2018Back-end Systemu2019 u2013 Back-end UoM. Depending on the implementation scenario U use, you can have the interface to the back-end carry out the translation. For this you can use the available Badiu2019s: BBP_CREATE_BE_PO_NEW, BBP_CREATE_BE_RQ_NEW, BBP_CREATE_BE_RS_NEW
Downside of this solution will be the extra maintenance effort for the Z-table. Best choice in my perspective would be the business change.
Kind Regards,
Skander -
One SRM integrated with multiple Backends
Hi All
Can One SRM be integrated with multiple Backends?
If so any insights, documentation, pros-cons that can you all can share?
Does the version of SRM or ECC matter?
SRM version will be 7.0 and ECC 6 EP3.
Thanks,
GamadHi Gamad,
multiple backend systems for one SRM is normal and works fine.
You just need to connect the systems, replicate the materials/vendors you would like to use and maintain the SRM customizing:
1) Add the further backend system(s):
-> Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend Systems
2) Define the scenario/follow-on document creation for the product categories
-> Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category
3) Define the scenario/follow-on document creation for the product categories
-> Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Define Objects in Backend System (Purch. Reqs, Reservations, Purch. Orders)
Regards,
Peter -
Find exact RFC Destination for Multiple backend Systems In SAP Gateway
Hi Gateway developers,
I have requirement,if gateway hub system has multiple backend systems( for example two backend systems: ECC and SRM ) then how hub system can get the suitable backend alias for exact entity collection..
Here i have developed two entities one entity regards: ECC and second one regards SRM system..within this when I run the service it is always taking any of the same alias for both the collections..
Can you please suggest me..
Thanks
Sreenivas PachvaHi Srinivas,
You can add the respective system Alias Name: Like logical system name in your URI also.
Example:
/sap/Service Name;mo=ECCCLNT210/zentity1?Customer1='0001'
/sap/Service Name;mo=SRMCLNT400/zentity2?Customer2='ABCD'
May this help you.
Thanks,
Saurabh Gupta -
Unable to define connector for multiple backend systems in BRM
Hi,
I am on GRCFND_A V.11 and SP04
I have multiple backend systems integrated with GRC box. So far I was using one backend connector as default one for role maintenance but it is not feasible if you have to create roles in variuos backend connected systems. I know one way to do so, i can keep changing the default connectors whenever i need to create roles but that is obviously not at all the onw any one would like to go with.
So, I tried to create unique connector groups for every individul backend connectors. But the issue is, the moment i assign the backend connector to the respective connector groups, the same gets reflected to other connector groups as well. So, whenever i either add or delete some of the connectors to any connector groups it gets modified/changed from all of the connector groups.
These are the backend connectors where i have to create roles from BRM whenever needed.
These are the connector groups:
I followed to the ink: GRC AC 10 BRM: Default Connectors with Multiple Back-end R/3 Systems , which is the same as mine issue, but not able to come to the solution point.
would appreciate for your quick response.
Thanks,
AmeetCould anyone suggest solution to the above mentioned issue please?
-
Mapping of single Portal users to multiple backend user
Hello Experts,
It is possible to map single portal user to the multiple R/3 user? If yes, than what is procedure to achieve it?
I have a SAP Portal where some users have 2 user ID in ECC, but I need to in Portal the users have only one user ID and password. How can I do to these users can select between their 2 profiles in ECC? Is posible?
Thanks!
RegardsHi,
This is not possible since you would have used SSO to connect to the Backend. Either it is SSO or User Mapping is done, Portal User can only access the Backend with one User ID.
If you use SSO, for Example if the Portal User is UserA then you would have the UserA in the Backend too. It will use the UserA in backend to access. (Note: Single User can't access multiple Backend. Since we would have already maintained the Backend Connection details in the System and also in JCo Destination. So it is not possible for a User to access the Backend with two different Backends)
If you use User Mapping, then you can decide the User which it should use. (For ESS/MSS this is not recommended and it is not feasible too).
Regards,
Baskar.N -
File to Multiple Idocs scenario. Pls help
Hi All,
For Single File to Multiple Idocs scenario i am referring blog --
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
Suppose my source file is
AAA, BBB,CCC
111,222,333
ZZZ,ZZZ,ZZZ
I want to make 2 IDOCS for the first 2 records (AAA, BBB,CCC and 111,222,333)
and do not want to make IDOC for the 3rd record -- how to achive this.
RegardsHi,
If the condition is like, for 'AAA' and '111', IDocs to be generated, then do as follows.
If IDOCs are of same type.
1. Value
> Equals -
> createIf -
> IDOC
Constant('AAA')
2. Value
> Equals -
> createIf -
> IDOC
Constant('111')
3. Value
> Equals -
> not -
> createIf -
> IDOC
Constant('ZZZ')
If 2 IDocs are of differnet types,
create different mapping programs with same logic.
If 2 IDocs are to be generated based on the record no in the file rather than the first field value, i think you can go for Global container.
Refer these,
[http://help.sap.com/saphelp_nw04/helpdata/en/ee/bf9640dc522f28e10000000a1550b0/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/EN/49/1ebc6111ea2f45a9946c702b685299/content.htm ]
[http://help.sap.com/saphelp_erp2004/helpdata/en/75/8e0f8f3b0c2e4ea5f8d8f9faa9461a/frameset.htm]
thanks.
Edited by: P.Ravi Varma on Apr 22, 2009 10:27 AM
Maybe you are looking for
-
Error while viewing the result in OBIEE
Hi, we have installed OBIEE in a linux host. I am able to start the server and I am able to login. During the creation of report,.. after selecting the columns, when I press on the result , I see the following exceptions .. Error Details Error Codes:
-
The top button on my phone recently stopped working. Well sometimes. Majority of the time if I click it hard enough on the left side of the button it will lock the screen... Otherwise it doesnt work at all anymore. Also the camera appears to be placi
-
Help with N8 and Adobe Premiere?
Hi, I am using Adobe Premiere Pro CS4 v4.1.0. I recently got a Nokia N8 and am now trying to edit the video recordings, but am having some problems. The phone records at 25fps 1280x720 using H.264 MPEG-4 codec, with sound in Stereo 130kbps 48 kHz. Wh
-
Computer doesn't detect iPhone
I have a 1st gen iPhone and when I plug it into my computer, it doesn't detect it. I know the USB works because the phone is charging. What can I do to get my computer to recognize the device? I am using a desktop Mac with OS 10.5.7 and iTunes is v 8
-
Hey folks I'm hoping you can help me out. I'm using Flash CS6 to generate art assets and animations for a mobile game but I've noticed a lot of lag when navigating the timeline, manipulating objects, just about anything really. Click the timeline and