Multiple Batches to be created in Single GR

Dear All,
Please have a look at my problem.
I have ordered for 10 Pieces of a Material.
The Material is batch managed.
Now during GR, the requirement is such that GR should be done in Multiple Batches which is same as Vendor Batches.
Like if the vendor has sent Material in 3 Batches of 3, 5, 2 Quantities,
then during GR... i must also take in 3, 5, 2 quantities in Single GR in multiple Batches.
Is there any way to achieve this? ? ?
I have suggested them multiple GRs... Am i correct or is there any way i can achieve this.
Regards,
Jyotsna Loomba

Hi,
Try this.
1. Goto Tcode MIGO with your PO number and do the GR for 3 quantities and give the batch mentioned by the vendor. Dont process check and post
2. Again go the PO reference field and give the same PO number and do the second GR for the 5 quantties with the different batch number
3. Then finally do fot the 3 rd GR.
4. With three line items in GR, check and post the transaction.
It will generate only 1 Material document number.
Regards,
RitiG

Similar Messages

Using Multiple 871W Routers to Create a Single Wireless Network

My company purchased 5 Cisco 871 W Wireless routers, and we'd like to configure them to act as single wireless LAN so that users can move around the building with their wireless devices and not experience an interruption in their connection. What do we need to do to make that happen?

This will work fine as long as you are only performing layer 2 roaming. If each 871s WLAN resides within a different subnet the client will need to pick up a new IP address each time it moves between Routers.
If all Routers are configured within the same client subnet then the SSID and security settings will also need to match on each 871.
Bear in mind if you are using 802.1x auth then a full re-auth will be required for each roam as there is no central key management which will increase latency.
Lastly AP placement and channel settings are most important, remember for data to have a cell boundary of -75dBm with a cell overlap of 10% sticking to channels 1,6,11.
Will you be running voice on the WLAN?
Hope this helps.
Mat

Can i create a single image from multiple images in lightroom?

Can i create a single image from multiple images in lightroom?

Like a panorama, a composite or focus stack? Have you tried the Lightroom forum?
Photoshop Lightroom

How can I create a single order from multiple quotations?

How can I create a single order from multiple quotations that I have created by the transaction VA21 ?
Thanks in advance for the answers.

hi
Go to transaction: /nva01
Enter order type : ZOR
Sale org :xxxx
Dist.channel:xx
Division :xx
Press enter
Click on Sale document and select Create with reference
Then enter 1st quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation1 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 2nd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation2 copy to order.
Then,
Click on Sale document and select Create with reference
Then enter 3rd quotation number & click on COPY or Selection list. Then click on Copy .Then all line items which belong to quoation3 copy to order.
Now save the sale document.
Kindly give reward points
Edited by: WISH on Mar 19, 2008 2:25 PM

How to create a single SCN [Inbound Deliery] ' VL31n '   for multiple PO's

How to create a single SCN [Inbound Deliery] ' VL31n '   for multiple Purchase-Orders with the help of BAPI or BDC Recording in 4.6 b version.
Manually its possible.. but how is it possible in the background i.e through BDC Recording or BAPI's.
[ As we donot have an option of creating one same SCN [Inbound Deliery] for multiple Purchase-Orders in 'VL31n' ].
Please provide the needful Information.

These mpeg2 clips do not have audio.
I simply want to create a script that can read in the files, append to each other and then export to an .mov format.
I want the process to be called from a command line that will open QT, run the script, read in the files, append and export.
Thanks.
G5 and Mac Pro Mac OS X (10.4.8) PC's and Windows
G5 and Mac Pro Mac OS X (10.4.8) PC's and Windows

Create inbound delivery for same material with multiple batches

Hi Experts,
An ASN( advanced shipping notification) contains multiple batch numbers for same material or line item.An IDOC has different segments with batch numbers but in SAP while creating Inbound delivery(VL31N) only batch number ( segment) get posted automatically in SAP other batches are need to post manuaaly.
I am using IDoc type : Delivery03 ,Message type: DESADV
How to resolve this problem?
Thanks,
Anil

Hi Anil,
Welcome to SCN for your first post. Did you check with your functional people about this.
Regards,
Madhu.

How do I create a single PDF Portfolio from an Outlook 2011 email with multiple non-pdf attachments?

How do I create a single PDF Portfolio from an Outlook 2011 email with multiple non-pdf attachments?
Email has 3 attachments--some are not pdf. I'd like all three converted into pdf files along with the email itself, and all appear in the email's pdf portfolio.

I would also like an answer to this question.
I am trying to convert an Outlook email to a PDF, then all attachment are appended to the PDF as pages instead of attachments.

Can we create multiple billing document from delivery with single line item

can we create multiple billing document from delivery with single line item

Hi
Please check the link
[can v create multiple billing document from delivery with single line item]
and as Lakshmi said, check the forum before posting an issue.
Regards
AA

Can v create multiple billing document from delivery with single line item

can v create multiple billing document from delivery with single line item

Dear Sandesh
Go to VOV7, select your item category. In this maintain K for Billing Relevance
Now go to VF01, give the delivery number and do not press Enter. Instead click on Selection list on the next screen, select the items you want to bill and click copy and continue if necessary
thanks
G. Lakshmipathi

Looking to create delivery with multiple batch line items

Hi,
Can you please suggest me BAPI / FM to create a delivery with multiple batches. like ... i have 1 mail line item in the delivery and n sub line items. If possible can you please post req parameters too. Thanks in advance.

solved my own

No Single batch split item created in delivery during picking

Hello,
When there is only one batch split item, SD_DELIVERY_UPDATE_PICKING is not creating batch split item (90001) if delivery quantity is equal or less than picking quantity...I didi search for SAP Note (1360407) and found one which is applicable only to P3A Component.
Instead of batch split it updates at item level itself. Now if again i post an IDOC with 2 batch split, then it adds both picking quantity and update the same line item itself.
This is much worse. Any one faced this issue before???
Thanks to update me
Regards
Hari

When the batch is the same, regardless of the number of times the same batch is picked, the update to the delivery will be to the same header line item. The batch split (delivery line split with parent and child line items) will occur only when there are multiple batches picked against the same header line item. Since this behavior is standard SAP I'm doubtful that this can be changed via an exit or BADI (I couldn't find one to influcence this).

How do I create a single image using PSE12 from multiple originals where each original is still separate?

How do I create a single image using PSE12 from multiple originals in which the originals are still separate (i.e. side by side or arranged in a square)? I could do this in PSE2, but can't find how to get PSE12 to do it.
Grecophile55

In PSE2 there was a single photo-merge. I browsed all my images and I could then click and drag each to its new position before saving. There doesn’t seem to be a similar facility in PSE12.

Creating a single public key and multiple private keys

Hello,
I am new to java cryptography. The problem statement is :-
We have an accounting application, with flexibility of number of users and companies. The number of users and companies for this application has to be restricted based on the license the user has. That is the user will download our application via web while the user downloads he has to be given the key according to the license he has requested (i.e. single or multiple users/companies), I am unable to get the logic of private and public keys as such, y because which ever alogorithm i saw will generate a public and private key in pairs hence i am bit confused. Clearly, For ever additional user (or company) we r charging additional amount hence different license (keys) have to be generated dynamically for different users. I think this can be achived by creating one single public key and multiple private keys, but i am not sure . Please help me out.

Hi kazim
would u pls elaborate this , since i am working on same kind of scenario and finding solutions is difficult . Since encryption is done at our end and wen some user downloads an application he is unable to track where it was encrypted . What i have undestand about public /private is that they work in agreement between client and server and both has to come to agreement to share the data. Pls correct me if i am wrong.
Ours is different senario we will send some key in download application and will want him to decrypt it . What would u suggest for this kind of scenario?
Thanks in advance
Janesh

Does OBIEE has ability to create a single cube from multiple data sources?

Hi all,
Does OBIEE has the ability to create a single cube from multiple sources and does it has the ability to join multiple cubes?
Looking forward to ur reply.

Hi
OBIEE can join multiple data sources to make a single data model, but it's not a cube in the multi-dimensional sense like Essbase or Oracle OLAP.
To be able to join datasources together they need to have a common dimension or FK relationship depending on what the source is and what you want to do with it.
Ed

Multiple Batches in a HU causing Multiple Pick TOs be created

Hi,
Below is my scenario and I hope some one that is familiar with WM/HU can help me.
We have HU with multiple batches (e.g. 5 different batches) which are received on the same time, we are also 2 step picking relevance. So, we have to create picking TO using LT0E to against the DN group number. We are expecting only 1 TO been created if the HU quantity (e.g. 5 units) is matching the DN quantity (e.g. 5 units). However, the system is generating 5 TOs and each referring to the individual batch number. This has actually cause issue on TO confirmation process where the system is prompting a Destination HU which at the point of picking this sould be equivalent to the Source HU. However, system do not except the Source HU and throwing out the error message saying "Destination storage bin of TO item # and HU# are different". Can anybody help me to understand what is the problem here? Thanks.
Tracy

Hi,
Try this.
1. Goto Tcode MIGO with your PO number and do the GR for 3 quantities and give the batch mentioned by the vendor. Dont process check and post
2. Again go the PO reference field and give the same PO number and do the second GR for the 5 quantties with the different batch number
3. Then finally do fot the 3 rd GR.
4. With three line items in GR, check and post the transaction.
It will generate only 1 Material document number.
Regards,
RitiG

Multiple Batches to be created in Single GR

Similar Messages

Maybe you are looking for