Multiple billing from one delivery document

Hi Gurus..
I have one billing scenario in that delivery document has 100 qty (PGI) but while billing document I have to select only 50 qty and remaining 50 qty will have one more billing document.
Please note that I have tried this thru u201CSelection Listu201D in billing document but when I entered in Selection list overview the field open quantity has grey. Ideally it should be in white so that I can change the open quantity and create less qty bill .
Can any body tell me why that open quantity field is Grey?
Regards,
RAJ

hi Raj
1. Check Delivery to billing copying control Seeting T code = VTFL in that Billing quantity is = B and Pos./neg. quantity = "+"
2. Check Item Category Setting in T code VOV7 in that check field Billing Relevance, it should be "K" Delivery-related invoices for partial quantity
Regards,
Ratish

Similar Messages

Multiple Extracts from One Large Document

I receive a large (approx 450 pages) PDF document bi-weekly listing data on our 400 employees. Each page lists one employee with some employees having 2 or 3 pages devoted to them. The employees are sorted by Employee ID Number. I need to send each supervisor the appropriate pages for each employee they supervise. This is done by e-mail. Supervisors supervise between 1 and 30 employees.
I need to identify where the appropriate employee is and extract the approrpiate page(s) to the supervisor's file folder in preparation to e-mailing to the employee. In some cases, the employees for each supervisor might be contigious but most often not.
An added complication is that employees come and go and may change supervisors. So, an automated process for each report cannot be easily duplicated.
How do I do what I need to do in the easiest fashion possible?

I think that the easiest solution would be to receive the information as 400 separate documents, because then the problem would be reduced to sorting.
Barring that, if you have a lot of disk space, one possible solution would be to maintain a DOS-style batch file that would create 400 copies of the large PDF in the correct file folders and with the correct filenames. Each line of the batch file would read something like "copy large.pdf supervisor1\employee1". The batch file would live in the same folder with the original large PDF; assume that you would navigate to that directory before running the batch in the Windows DOS emulator (Command Prompt). Before running the batch file, you would need to edit it in Notepad (or other) to account for supervisor or staff changes. (If you maintain information from week-to-week in the same directories, you might want to make corresponding changes/additions/deletions to the collections of PDF files under each supervisor name.) After you run the batch file, you would have the not very pleasant task of opening each PDF and deleting the pages you don't need, that is, preserving the pages for the relevant employee.
Or, check the market for an application or Acrobat plug-in that would allow you to accomplish the multiple extracts more elegantly.

Multiple invoices from one Delivery - Issue

Hi All
This is a strange one for you all to consider and any suggestions would be greatly appreciated......
I have a sales order with only one line item, qty = 10, a delivery is created and Goods Issues for the entire qty 10. When it comes to billing, some how three (3) billing documents are created all exactly the same with qty = 10.
So the document flow goes like this:
Sales Order - qty = 10
     > Delivery - qty = 10
          >Transfer Order
          >Goods Issue
          >Invoice 1 - qty = 10
               >accounting doc 1
          >Invoice 2 - qty = 10
               >accounting doc 2
          > Invoice 3 - qty = 10
               > accountind doc 3
Any suggestions would be appreciated!
Cheers
Tammy

hello, tammy.
please go to the sales order and check the item category. then go to VOV7 for the item category and check the "completion rule".
also, check VTFL for copy controls between billing and delivery. look at "pos/neg". it is supposed to be "+".
do post your findings.
regards.
Edited by: jy on Nov 24, 2009 10:57 AM

Copy billing plan lines from one sales document to another

HI,
we want to copy the open billing plan lines from one sales document to another, which routine should we use in the copy control in configuration?
we tried to use,401 and 402 but with no success..
it's should'nt be a standard process with out any development?
Best Regards
Yehudit

Hi,
Check where you entering this routine
If your billing plan at header then enter it at header in copy control, if billing plan is item level then maintain at Item level in copy control
Kapil

How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
When I clicked the Save button it showed the page that I scanned and showed 1/1. On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
Not to mention HP's Customer Support is useless!
I'd appreciate any help I can get with this problem.
Thanks,
Mark

Hi BH,
I see your diagram. I just scanned something. The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram. The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram. I can't see the plus sign because it is not there.
I tried re-installing the software and drivers as you suggested but that did not have any affect.
Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
I've noticed that on HP's support forum web page there is only 1 solved request for assistance. That doesn't give me much confidence in HP.
Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
Thanks,
Mark

Multiple shipments for one delivery?

Hi,
Can multiple shipments be assigned to one delivery in standard SAP?
Regards,
Siddharth.

hello, friend.
there are at least 2 ways of looking at your situation:
1. you can use just one delivery document for many shipments (control will be outside of SAP and will require strict monitoring), or
2. if you are implementing LE-Transportation as well, you most likely will have to do "delivery split" so that one delivery can be broken up into as many deliveries as you need, where one delivery equals one shipment.
which of the above will be applicable for your needs?
regards.

How do I copy a page from one Pages document to another using Pages 5.0?

I posted this question on another page, and haven't recieved an answer to it yet. However I have found a temporary solution, so I am posting this here in case anyone else has a similar problem.
The issue here is that I have just upgraded from Snow Leopard to Maverick (10.9.1), and my Pages also upgraded (to 5.0.1), altering my Pages documents. This is the issue, as as far as I can see the new Pages does not offer some of the basic needs that the old Pages did! In other words it is worse than the previous version.
Using the upgraded new Pages 5.0.1 seems to result in some major editing problems for me. If you upgrade, make sure you KEEP the old version of Pages 09 (v 4.3). That is what has saved me! If you have the same problems I have had - explained below, you will still be able to close the new version and open your Pages document in the old version, provided it is not a new Pages document. If it is, it will be possible to export it as a Pages 09 document and edit properly.
After upgrading to the new Pages 5.0.1, when I open documents in Pages and try and copy a section from one document to another (easy before using the thumbnails) many of the Menu items previously available are visible but appear faded and are not possible, including Insert>Section Break/Page Break/Page Number and Edit>Cut/Copy/Delete/Undo/Redo
This even happens if I duplicate the Pages document and try and do any of these from the Duplicate (which should be an easily editable copy).
My solution has been to simply open all Pages documents that Iwant to edit (or may want to edit in future) in the old Pages app (v 4.3), which I never got rid of. That has meant I can continue editing and copying a section (of 1 or more pages) from one Pages document to another.
If anyone reading this has figured out a way to edit Pages documents using the new version 5.0.1 please post an explanation, and I will try it!

And there are those who don't like me repeating the same message over and over again in this forum!
Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
Peter

To Move Multiple Files from one directory to another.

Hi,
I need to move multiple files from one directory in UNIX (application server ) to another. I need something like an FM 'STRALAN_COPY_FILES' which is also valid in ECC 6.0.
Thanks in advance.

Hello Sachin
Below you see a copy of how to use EPS_FTP_PUT using transaction SE37.
Import parameters               Value
RFC_DESTINATION =                 NONE
LOCAL_FILE             =         filename
LOCAL_DIRECTORY   =              /dir1/dir2
REMOTE_FILE             =        filename
REMOTE_DIRECTORY   =             /dir1
OVERWRITE_MODE        =          F        " force -> overwrite existing file
TEXT_MODE                    =   B               " binary
TRANSMISSION_MONITOR            X       " display transmission monitor
*RECORDS_PER_TRANSFER            10
*REQUESTED_FILE_SIZE             0
*MONITOR_TITLE
*MONITOR_TEXT1
*MONITOR_TEXT2
*PROGRESS_TEXT
*OBJECT_NAME
Regards,
Uwe

Duplicating form fields from one PDF document to another

Hi,
Does anyone know of a way to select and duplicate all acrobat form fields from one PDF document into a new PDF document. I know I can do so one field at a time but would like to know if there is a way to do so in a wholesale fashion.
Our PDF documents are created in-house each year and are nearly the same as the previous year's document containing 99% of the same form fields in the same locations. These forms contain a lot of form fields, anywhere from 50 to 100 fields.
Rather than start from scratch each year defining the same fields that were present in the previous year's document, I am looking for a way to copy the form fields from an existing PDF document (last year's PDF in our case) and copy the form fields into a new PDF document (that does not yet have any form fields defined) and hopefully maintain all the field attributes and positions from the previous years document.
Thanks for any suggestions,
Steve

The PDF template we need to copy the form fields "to" doesn't start out having any form fields. It is the fields that we need copied from a previous year's PDF template.
Here's an except from my original post: "I am looking for a way to copy the form fields from an existing PDF document (last year's PDF in our case) and copy the form fields into a new PDF document (that does not yet have any form fields defined)"
The "new" PDF template is a complete "paper" form with updated legal text and calendar year referrences but NO form fields. In our IS group, we then take these forms, add form fields to them and are then able to populate them with database-resident user data. We serve them up to the user in their browser pre-populated with their application data.
So again, our need is to find a way to copy form fields from "last year's" PDF template and copy just the form fields to an fresh "new year's" PDF template that contains no form fields to begin with. What we begin with is just a PDF representation of a paper student loan application.
Thanks for the suggestion!

Moving multiple queries from one category to another in QM

Hi All,
Is there is any way of moving multiple queries from one category to another in the query manager?
Or is the only way of doing it by saving each one individually into a different category.
Any ideas ?
Regards,
Rakesh N

Hi Rakesh,
The query manager has limited function compare with normal file management applications. Under current design, you have to do this one by one. You just need to make sure move the smaller amount of queries to large category. Category name can be changed easily.
Thanks,
Gordon

How do I copy a page from one pdf document to another?

I am a newbe!

That was easy.Thank you.
Re: How do I copy a page from one pdf document to another?
created by George Johnson in Creating, Editing & Exporting PDFs - View the full discussion
If you open both documents, you can drag a page from the Pages panel (on the left of the window) of one document and drop it into the Pages panel of another.
You can also extract one or more pages from a document to create a new document, and then insert the pages from this new document into another. In Acrobat 11 you 'd do this by doing:
Tools > Pages > Extract
and then:
Tools > Pages > Insert from File
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6163925#6163925
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6163925#6163925
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6163925#6163925. In the Actions box on the right, click the Stop Email Notifications link .
Start a new discussion in Creating, Editing & Exporting PDFs at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 .

I dragged a cut out image from one photoshop document into another and now it is blurry. What to do?

I dragged a cut out image from one photoshop document into another and now it is blurry. What can I do to prevent this?

What is the resolution of the image that you "dragged"? The resolution is the number in pixels per inch (ppi). If you dragged a significantly lower resolution file into a higher resolution file, it could result in a blurry image.
see below:
For further reading of Key Concepts:
http://www.adobe.com/designcenter-archive/keyconcepts/articles/concept_resolution.html
You can determine the image size by choosing Image > Image Size
below you can see the pixel dimensions of my example image.
Resolution Basics:
Adobe TV- http://tv.adobe.com/watch/creative-sweet-tv/photoshop-resolution-basics/
http://tv.adobe.com/watch/visual-design/getting-started-09-resizing-an-image/
Adobe Help:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7945a.h tml
-janelle

Add to Multiple Tables from One Page

Hello,
I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table IDD_ID_DATA.
So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
I am new to APEX so any help would be greatly appreciated!

UPDATE:
I received an email from the APEX Support Team:
"The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
I have been playing around with PL/SQL code and the end result is this:
begin
     INSERT INTO table1
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
     INSERT INTO table2
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
end;
I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

Scenario of multiple Asset from one AUC/WBS

Hello,
I am having a requirement, where I need to create multiple Asset from one WBS. I checked in the system and able to create more then 1 Asset for WBS.Also if I maintain the distrubution rules for those Asset then settle it accordingly to different Assets.
I just wanted to confirm, will it we the right way of handling this scenario? My main concern is this involves intervention of user for maintaing the settlement rule during final settlement.
Is there any other way to handle this scenario?
Thanks
Sarang

Hello Virendra,
I am not using Investment Managemnt. What do you mean by IM profile?
I understand that I need to maintain the source of cost in Source structure. But even in that scenario the user has to go and maintain settlement rules and create multiple Asset against one WBS.
So how do I tackle it, if client requirement is such that they want to create only one AUC, but during final Asset creation they want to create multiple Assets from one AUC. They dont want to have WBS for each Asset.
Thanks
Sarang

Creating multiple links from one map image in Flash CS4

I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

If I was to answer the problem, I would be giving you what you asked not to be given... the solution. So I'll suggest that you start by researching the getURL() function. That is what AS2 uses for opening web pages.
As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering. In general, if you type in the right keywords, you get fairly good search results. In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

Multiple billing from one delivery document

Similar Messages

Maybe you are looking for