Multiple bin-release folders after 4.6 upgrade

Hi,
I've searched for an answer for this and I assume its a dumb question, but after upgrading to Flash Builder 4.6 from 4.5 whenever I run an Export Release Build I get a new bin-releaseX folder. Is there a configuration item I can set to make it reuse the current bin-release and not create another Linked Resource? Its actually only using the same physical directory (which is what I want). But I don't need a growing list of bin-releaseX folders in the project.
It didn't do this in 4.1 or 4.5 so I 'guess' I'm just missing a setting?
Any ideas?
Many thanks

I am in the same boat! And when I tried to delete the extra bin-release folders some of code started to get warnings, it would still work, but it has warnings where it shouldn't

Similar Messages

Multipe bin-release folders - SDK 4.6

One of my projects is creating multiple multiple bin-release folders whenever I export release build. Does anybody know how to fix this or the reason? I am using SDK 4.6. Thanks!
Somebody else had posted before with the same problem:
http://forums.adobe.com/message/4236775

I am in the same boat! And when I tried to delete the extra bin-release folders some of code started to get warnings, it would still work, but it has warnings where it shouldn't

Removing CS3 application folders after installing CS4 upgrade

I just upgraded to CS4 on my Mac and wanted to know if it's safe to remove CS3 folders that appear in the "Applications" folder. I won't need multiple versions of the software taking up space on my system, so is it safe to just toss the folders in the Trash?

It would be wise to keep CS3 until you are familiar with CS4. If you uninstall CS3 then run into a problem with the new way things work in CS4, you will need to uninstall CS4 to reinstall CS3 then reinstall CS4.

Multiple Printer Communication Errors after July Mavericks Upgrade

Running multiple machines and printers, including:
- iMac 2014; MacBook Pro 2013; iMac 2011; Tower 2010 / Mavericks
- HP 8500 / USB and AirPrint / "Communication Error while Scanning"
- Dymo Twin Turbo / USB / "Printer is Offline"
- HP 400, HP 2430, Epson 3800 / LAN / No communication errors
Since latest upgrade, my machines have stopped communicating with these printers. Those machines running Mountain Lion (two older Towers and MacMini) an still print and scan. I have dumped and re-installed all drivers. Have powered-down, disconnected, and reconnected all printers multiple times.
Can scan to HP using web interface. Dymo is dead in water with anything running Mavericks. Because both the trouble printers are connected USB, I'm thinking that is the smoking gun. Anyone else in the same boat?
Hoping a patch is in the work. Thanks.

Haven't heard of that before.
Before anything else - Apple has changed their print driver paradigm. Manufacturers give current drivers to Apple who have it on their server for automatic download/install when you add the printer in Print & Scan prefs. Since 10.8, you don't normally install drivers (Dymo is probably an exception). HP even includes instructions for this on their web site.
You need to try some generic maintenance first.
Reset the Printing System:
OS X Mavericks: Reset the printing system
Restart from the Recovery partition (or some other bootable drive), and repair the normal boot drive using Disk Utility:
(read the 1st paragraph about how to start in Recovery)
OS X: About OS X Recovery

How to recover lost local 'On My Mac' folders after Mail 6 upgrade?

The Moultain Lion Mail 6 upgrade has dropped all my local 'On My Mac' archive folders.
Any ideas how to get these back?
Best,
Keith..

Number 6 wrote:
Nice idea but one of the 'value-adds' of my Mountain Lion 'upgrade' was it broke my Time Machine backups' integrity and forced a fresh backup.
Time machine is good when trying to recover from small
incremental changes or the accidental trashing of work
data, but should really not be relied upon for any major
system changes such as an OS upgrade.
I personally don't use it at all. For data and entire home folder
for that matter, I have a backup drive and for the system itself
I do periodic clones. Actually, since I rely on coputers for work,
I also do daily backups of projects I work on.
Some one asked me once how many backups should I have.
My answer was, "Always one more than what you have."

Ipad2 crashes multiple times a day after ios7 upgrade.

Ipad2 crashes multiple times a day after ios7 upgrade. This does not seem to be an app specific problem and has happened with Safari, other browsers, games, books, etc. The screen freezes and then the app closes to the reveal the desktop. I use the ipad exclusively in landscape. I have purged memory several times and tried re installation. I never had a problem with the device prior to the upgrade. Any suggestions or solutions? Many thanks.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

How do I restore mailbox folders after upgrade to maverick

HOW TO RESTORE MAILBOX FOLDERS AFTER UPGRADE TO MAVERICK

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Multiple users in a class room enviroment / deleting home folders after use

Hi,
I'm administrating a class room environment, where my students log on using Active Directory accounts. I would like to clean up the home folders after the users log out, so their profiles would be reseted when they log in next time. Is there any way to achieve this?
any advice is appreciated
thanks,
M

The usual way is :-
Create an account say "default".
Login with "default" and set up that account exactly how you want all the users to get. For example dock settings and browser home page etc.
Tidy up the account, empty the trash, delete recent servers, clear browser caches etc.
Login as root
Delete the keychain of the "default" account.
Copy all the home folders of default to /System/Library/User Template/English.lproj
Run repair permissions
Now all new users will get these home folders and settings when they logon.
Now all you have to do is use a script that deletes the home folders of a students when they logout
so they then get the default set when they login again.
Here is an example of one :-
#!/bin/sh
rm -r /Users/$1
N.B. OS X uses the variable $1 for the currently logged in user.
The easiest way to get this running when they logout out, is to use Mike Bombich's loginwindow manager. It complains a bit when you open it to set it up, but it still does the job with login and logout scripts.
Also have a look at this thread on edu_geek :-
http://www.edugeek.net/forums/mac/72443-how-create-os-x-default-profile-template -bind-ad-10-5-10-6-a.html

Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,

Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
        Compatibility Vsn = 186646528=0xb200000
        Db ID=0=0x0, Db Name='TEST1'
        Activation ID=0=0x0
        Control Seq=31739=0x7bfb, File size=230400=0x38400
        File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation   at   scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks,

Has anyone experienced invisible folders after update to iOS 8.1.2 and subsequent restore from backup on an iPhone 5?

It's apparent that a folder that was visible on my iPhone 5 while running iOS 8.1.1, is no longer visible after an update and restore on iOS 8.1.2. The folder had several apps I used regularly. They must be on the phone, because after initiating a 'Spotlight Search' for apps in they now invisible folder, the appear listed in the results.
Has anyone had this occur on their phone after an upgrade to the new iOS version? Is there anyone that can suggest at 'fix' or should i just try to restore again?
Thanks In Advance,
Fabian

So you have checked all of the home screens and the folder does not exist? I've not witnessed hidden folders. Try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone reboots, see if you can locate it. If not, then you can go to Settings>General>Reset>Reset Home Screen Layout. This should remove all apps from folders and reset your home screens.

Started with iPod/iTunes (home pc) several years ago. Added iPhone, iPad, laptop and office pc. Have multiple iTunes/iMusic folders

Started out with iPod/iTunes on a home pc several years ago. Added iPhone, iPad, laptop and office pc. Have multiple iTunes/iMusic folders on all 3 computers -- using iCloud to access media on iPhone/iPad. What's the best way consolidate songs, movies, books, etc prior to phasing out home pc? Which machine (laptop or office pc) is best to use as the master host for iTunes/iMusic going forward? Don't want to lose anything or create numerous duplicates.

I finally resolved this... by changing everything over to a new laptop. I had been running iTunes on a Vista desktop, and moved Outlook and iTunes to a Win7 x64 laptop. Once I got everything installed, I copied the iTunes folder to the laptop, transferred the purchases, backed up the iPhone and iPad to the new iTunes, and then synched them. Set iTunes to sync Calendar, Contacts, Mail, and Notes on both, and resynched. Once this was done and I verified that everything was intact on both the iPhone and the iPad, I tried entering a calendar event on the phone and then did another sync. The event showed up in Outlook. I then deleted the event from Outlook and did another sync and the event was gone from the iPhone. Did the same with the iPad and got the same results. So this apparently was something related to the desktop or Vista; I never got it resolved on the desktop. Not sure what it could be, but now that it's resolved I'm going to leave it alone. Maybe after I upgrade to an iPhone 5, I might try messing with the iPhone 4s on the Vista desktop. If I do, and happen to get it resolved, I'll surely post something regarding that.

IPAD2 very slow after IOS 8 upgrade

After IOS 8 upgrade many aplications ( Safari, Facebook, etc) load very, very slow (comparing with 7 version) , with a significant delay of more than 10 seconds...
Who can I solve this problem? Any workaround?
PD
Apple should better test the software before delivering.
Thanks.

Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
And that's just the annoying ones....

Hidden parameters appears after Oracle 11gR2 upgrade

Platform: HP-UX B.11.31 U ia64
Upgrading from: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Upgrading to : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Issue : There are around 130 hidden parameter appear after Oracle 11gR2 upgrade.
Before upgrade I have commented the hidden parameters on the PFILE. PFILE only to start the database for the Oracle 11gR2 upgrade.
Before upgrade, checking the hidden parameter:
SQL> SELECT name,description from SYS.V$PARAMETER WHERE name LIKE '\_%' ESCAPE '\';
optimizerextended_cursor_sharing_rel
optimizer extended cursor sharing for relational operators
allowlevel_without_connect_by
allow level without connect by
I am using client parameter file ( PFILE ) commented the hidden parameters highlighted above.
However after successful upgrade to 11gR2, creating SPFILE from the PFILE ( commented the hidden parameters) now i am getting 132 hidden parameters.
SQL> select count(1) from sys.V$PARAMETER where name like '\_%' escape '\';
COUNT(1)
132
SQL> select name from sys.V$PARAMETER where name like '\_%' escape '\';
name
aggregationoptimization_settings
alwaysanti_join
alwayssemi_join
andpruning_enabled
btree_bitmap_plans
bloomfilter_enabled
bloomfolding_enabled
bloompruning_enabled
complexview_merging
compressioncompatibility
connectby_use_union_all
convertset_to_join
costequality_semi_join
cputo_io
dimensionskip_null
eliminatecommon_subexpr
enabletype_dep_selectivity
fastfull_scan_enabled
firstk_rows_dynamic_proration
gbyhash_aggregation_enabled
generalizedpruning_enabled
globalindexpnum_filter_enabled
gsanti_semi_join_allowed
improvedouterjoin_card
improvedrow_length_enabled
indexjoin_enabled
ksbrestart_policy_times
leftnested_loops_random
localcommunication_costing_enabled
minimalstats_aggregation
mmvquery_rewrite_enabled
newinitial_join_orders
newsort_cost_estimate
nljbatching_enabled
optimadjust_for_part_skews
optimenhance_nnull_detection
optimnew_default_join_sel
optimpeek_user_binds
optimizeradaptive_cursor_sharing
optimizerbetter_inlist_costing
optimizercbqt_no_size_restriction
optimizercoalesce_subqueries
optimizercomplex_pred_selectivity
optimizercompute_index_stats
optimizerconnect_by_combine_sw
optimizerconnect_by_cost_based
optimizerconnect_by_elim_dups
optimizercorrect_sq_selectivity
optimizercost_based_transformation
optimizercost_hjsmj_multimatch
optimizercost_model
optimizerdim_subq_join_sel
optimizerdistinct_agg_transform
optimizerdistinct_elimination
optimizerdistinct_placement
optimizereliminate_filtering_join
optimizerenable_density_improvements
optimizerenable_extended_stats
optimizerenable_table_lookup_by_nl
optimizerenhanced_filter_push
optimizerextend_jppd_view_types
optimizerextended_cursor_sharing
optimizerextended_cursor_sharing_rel
optimizerextended_stats_usage_control
optimizerfalse_filter_pred_pullup
optimizerfast_access_pred_analysis
optimizerfast_pred_transitivity
optimizerfilter_pred_pullup
optimizerfkr_index_cost_bias
optimizerfull_outer_join_to_outer
optimizergroup_by_placement
optimizerimprove_selectivity
optimizerinterleave_jppd
optimizerjoin_elimination_enabled
optimizerjoin_factorization
optimizerjoin_order_control
optimizerjoin_sel_sanity_check
optimizermax_permutations
optimizermode_force
optimizermulti_level_push_pred
optimizernative_full_outer_join
optimizernew_join_card_computation
optimizernull_aware_antijoin
optimizeror_expansion
optimizerorder_by_elimination_enabled
optimizerouter_join_to_inner
optimizerouter_to_anti_enabled
optimizerpush_down_distinct
optimizerpush_pred_cost_based
optimizerrownum_bind_default
optimizerrownum_pred_based_fkr
optimizerskip_scan_enabled
optimizersortmerge_join_inequality
optimizersqu_bottomup
optimizerstar_tran_in_with_clause
optimizersystem_stats_usage
optimizertable_expansion
optimizertransitivity_retain
optimizertry_st_before_jppd
optimizerundo_cost_change
optimizerunnest_corr_set_subq
optimizerunnest_disjunctive_subq
optimizeruse_cbqt_star_transformation
optimizeruse_feedback
orexpand_nvl_predicate
orderednested_loop
parallelbroadcast_enabled
partitionview_enabled
pivotimplementation_method
prerewrite_push_pred
predmove_around
pushjoin_predicate
pushjoin_union_view
pushjoin_union_view2
pxminus_intersect
pxpartition_scan_enabled
pxpwg_enabled
pxual_serial_input
queryrewrite_setopgrw_enable
removeaggr_subquery
replacevirtual_columns
resourcemanager_plan
rightouter_hash_enable
selfjoinmv_duplicates
sqlmodel_unfold_forloops
sqltunecategory_parsed
subquerypruning_enabled
subquerypruning_mv_enabled
tablescan_cost_plus_one
unionrewrite_for_gs
unnestsubquery
usecolumn_stats_for_function

I just came across a similar case: 1 (just one) of our (RAC-) databases has 130-something underscore-parameters set to non-default values.
version is still 11.1.0.7 (e.g. not 11gR2).
All of those hidden parameters seem to be CBO related (list on request).
Weird is: Only one of our (very similar, supposedly same-config) databases have these hidden parameters set.
Colleagues justly wonder: Who, When, What has caused these parameters to be expliclty set for this one system?
Note: we do not have the complete history of this system documented (systems have been managed by 3 different parties already).
It is quite possible they came in with some patch or upgrade (catupgr?) somewhere between 11.1.0.1 and 11.1.0.7, but a confirmation would be nice.
Information welcome.
System info:
Linux hostname 2.6.18-164.9.1.el5 #1 SMP Wed Dec 9 03:27:37 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
Versions
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
5 rows selected.

After completing my upgrade to Adobe Reader 11.0.10 When I attpemt to use "Tools/File/File Save As" from IE 11 I get a "Adobe Reader is not Responding" and my browser is locked up.

After completing my upgrade to Adobe Reader 11.0.10. when I attempt to save an online PDF to my local drive I receive a blank window where I would expect to see file directory structure to save to.
No local directories are displayed for "Saving To", it is all blank. When I try to Close (by clicking X) the "File Save As" box a message pops up on top that says "Adobe Reader is not Responding" It locks up all of my IE windows, not just the one with the PDF doc.
I then need to go Task Manager and stop the IE task. All my browser windows are then closed.
That is the only way to recover from the "Adobe Reader is Not Responding" message.
This was not happening in previous versions of Reader.
Tolls/File/File Save As always worked properly.
I have installed IE 11 (11.0.9600.17690)

Please don't post the same question multiple times!

Satellite L855-124 can't change display brightness after Win 8 upgrade

Hello everyone,
I have a problem with my Toshiba Satellite L855-124 PSKACE laptop.
After upgrading to Windows 8, I can't change the brightness backlight of the laptop screen.
There seems to be an error in the graphical driver.
When I install the Windows 7 graphical AMD driver under compatibility, it works again but bugs out on other areas.
Anyone have any ideas?
Even after using the upgrade assistant provided by Toshiba it does nothing.
Also the drivers for my laptop are poorly updated. Dating back to 2012.
I have also called tech support, they told me that a driver team will be fixing the issue.
That was 2 months ago.
Is there anyone from Toshiba that can help me with this please?
Thank you.

The document provides info about the notebook models:
Satellite L870, Satellite L875, Satellite C870, Satellite C875, Satellite Pro C870, Satellite Pro L870, Satellite C850, Satellite C855, Satellite L850, Satellite Pro L850, Satellite Pro C850
PSKBLE, PSC8EE, PSC8FE, PSKBME, PSKCCE, PSKCEE, PSKDLE, PSKDME, PSKDNE, PSKCDE, PSKCCR, PSC8ER, PSKCCF, PSKCCV, PSKCEV, PSKBLR, PSKDLV, PSKDLR, PSKDLF, PSKG9E, PSCBBE, PSKFPE, PSCBZE, PSCBYE, PSKG8E, PSKFNE, PSCBDE, PSCBYR, PSKFNR, PSKCER, PSCBCR, PSKG8R, PSKFLE, PSCBCE, PSKG8V, PSCBYV, PSCBYF, PSKG8F
Choose the driver released for the following models

Multiple bin-release folders after 4.6 upgrade

Similar Messages

Maybe you are looking for