Multiple Black and white conversion from raw or jpgs

Hi All
Any help would be appreciated.
I have 300 wedding images taken on raw and jpg. I now want to convert them all to black and white. Any way I can do this without doing it one at a time (whether using raw or jpg files)?
Hope someone has the answer or else I need to fork out £500 for CS4!!
Clive

Hi
Thanks for reply. I am able to open and convert from raw ok, what I don’t know if I can do is process multiple files that have been changed, i.e. to black and white?
I don’t think PE8 will actually do this.
Clive Wilkinson
Assessment Coordinator
Kirklees Warm Zone
Mob: 07885 203466
The information in this internet E-mail is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of Yorkshire Energy Services CIC or any of its affiliates. If you are not the intended recipient please contact [email protected]
Yorkshire Energy Services CIC, company number 3995784. Company is registered in England and Wales and has its registered office at: St Georges Quarter,
Unit 9, New North Parade, Huddersfield, HD1 5JP, United Kingdom

Similar Messages

Black and White conversion issues going from LR to PS

When I take a black and white image directly from Lightroom to Photoshop using "Edit in Photoshop", the black and white conversion doesn't stay true. My image, once opened in PS, is mostly black and white, but has green and magenta casts running throughout. Anyone know how to resolve this without just gray scaling the image again once in PS?
Screen grab from LR on the left, and PS on the right.
Thanks.

Geoff the kiwi wrote:
How does the OP's green/magenta colouring equate to your stated red/cyan?
Well, it looks cyan to me. Here it is with saturation boost - assuming the OP made the screenshot correctly, assigning the display profile:
In any case, the Photoshop bug is well known and well documented, showing up as cyan shadow banding in ProPhoto files, when GPU is set to "Normal" or "Advanced" mode.
I'm not saying the display profile isn't involved, it most certainly is. The whole issue is the conversion into the display profile. And it also shows to varying degree with different display profiles - sometimes just subtle cyan bands, easily missed until you look for it, other times more pronounced and with secondary red banding (like here).
It also happens with sRGB as display profile. So the bug is real, no question about that.
What's different here is that there's cyan also in the highlights. But that could be the screenshot - or it could be "just" a bad display profile. I'm not ruling that out, just pointing out that there is a more likely explanation in this case.

Hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

You may want to read this I imported a mix of color and black and white raw files but lightroom changed all the black and white file to color?
The Black and white you see is just the cameras representation of the "raw" pixel information straight from the sensor. The RAW file format has yet to undergo demosaicing, and so it contains just one red, green, or blue value at each pixel location.
Lightroom, or any other RAW processor, doesn't recognize the in-camera processing because it is unique to the camera.

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

How do I select a black and white sketch from a white background and keep the filled in area of the sketch? I want to copy it to a colored background. I amusing elements 12.

How do I select a black and white sketch from a white background and keep the filled in area of the sketch? I want to copy it to a colored background. I am using elements 12.

oesrowstreasurer
Please clarify your "Elements 12". Is that as in Photoshop Elements 12 (photo editor) or Premiere Elements 12 (video editor). And, on what computer operating system is the program running?
Your question is pointing to Photoshop Elements 12 and that you have posted in the wrong forum. If this is a Photoshop Elements 12 question as I believe it is, please post your thread in the Adobe Premiere Elements Forum using the following link provided for your convenience
https://forums.adobe.com/community/photoshop_elements
The alternative is to wait for a moderator to see your thread here and move it from here to the Adobe Photoshop Elements Forum..
We will be watching for a confirmation on what program you are using.
ATR

Extracting Photograph Noise as a black and white layer from Photograph

I am looking to extract natural noise from a photographs material and create a black and white layer out of it, but I am new to photoshop and unsure how to proceed with this.
For example, here is a photograph of a hard plastic gun.
[IMG]http://dl.dropbox.com/u/2871613/racer/G36.jpg[/IMG]
I have seen on forums where users will find a good reference image and use it to create a new black and white noise picture utilizing the reference.
For instance the hard plastic noise from the gun, might look like this once extracted and done correctly.
[IMG]http://img.photobucket.com/albums/v11/wwarriorww/hard_plastic.png[/IMG]
Any ideas on how to produce something such as this?
Thank you

This is just off the top of my head... You could try something like this:
1. Duplicate the image as a second layer.
2. Run a noise-reduction tool with aggressive settings, possibly multiple times.
3. Set the noise-reduced layer to Difference.
4. Merge layers.
5. Filter - Other - High Pass.
6. Enhance the magnitude of the result with a curves or levels operation.
-Noel

Black and White conversion

Has anyone worked on finding greyscale conversion 'slider recipes' that give a similar look to various popular films. Would appreciate if you could share some of these.
Cheers
Kev.

onOne offers a set of 85 Lightroom Presets, which includes 10 black and white presets you might find worthwhile. You can download them for free at the bottom of the page in the following link:
http://www.ononesoftware.com/downloads/
If you have PhotoShop, you might also find their plug-in called PhotoTools helpful. It has three times as many presets (in the professional version), but does not work in Elements. Check out the video tutorials about using the library, using presets, and using the stack, along with the four real-world examples of how to apply the presets at the bottom of the list at this link:
http://www.ononesoftware.com/tutorials/tutorials_phototools.php
I currently have Elements6, and onOne's Plug-in Suite4. The fact that PhotoTools is not compatible with PE6 makes me want PhotoShop even more. Fact is, the only reason I haven't upgraded to that is I am waiting for CS Next before doing so.
There are also presets made available by other users... some free, some not, at the following link:
http://www.adobe.com/cfusion/exchange/index.cfm?s=5&from=1&o=desc&cat=281&l=-1&event=produ ctHome&exc=25
Hope you find the links useful.
Regards, JML

How can I print in black and white only from mobile device

I print coupons from the coupons.com app. I can change the settings on my printer through my computer to print in black and white only so as not to use up all of my color ink. How can I change this on my iphone to print in black and white?

Hi,
HP ePrint app on a modile device allows you to print Grayscale mode
Regards
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Make Black and White PDF from Color JPGs

I don't have a scanner and use my digital camera to make 2-3 page document PDFs occasionally. I take a picture of a page, crop it in an image editor, and finally drag and drop the jpgs into Acrobat to create a pdf. The problem is that these docs don't print very well because they are created in color. Is there an easy way to make them in black and white instead of color? I don't want greyscale documents, because they don't print very well either.

~graffiti wrote:
Grayscale would be the way to go to retain shadows and tints.
I'm dealing with text-based documents on colored paper, so shadows and tints are exactly what I don't want.
Printing a greyscale image on a laser printer produces the same result as printing the original image in full color.
I'm not sure what you mean by that. Could you elaborate a bit?
I use a non-color laserjet. Printing a color document with a black and white printer and printing a greyscale document converted from that doc will print the exact same thing, i.e. black text with nasty grey backgrounds.

Black and white conversion of tiff files in pse6

I like the "convert to black and white" utility in pse, but was disheartened to discover that it doesn't seem to work with tiff files. Also, the "adjust smart fix" and "auto red eye" options are not available with tiff files either. Is there a way around this?

Geoff the kiwi wrote:
How does the OP's green/magenta colouring equate to your stated red/cyan?
Well, it looks cyan to me. Here it is with saturation boost - assuming the OP made the screenshot correctly, assigning the display profile:
In any case, the Photoshop bug is well known and well documented, showing up as cyan shadow banding in ProPhoto files, when GPU is set to "Normal" or "Advanced" mode.
I'm not saying the display profile isn't involved, it most certainly is. The whole issue is the conversion into the display profile. And it also shows to varying degree with different display profiles - sometimes just subtle cyan bands, easily missed until you look for it, other times more pronounced and with secondary red banding (like here).
It also happens with sRGB as display profile. So the bug is real, no question about that.
What's different here is that there's cyan also in the highlights. But that could be the screenshot - or it could be "just" a bad display profile. I'm not ruling that out, just pointing out that there is a more likely explanation in this case.

Printing in black and white only from the internet with a photosmart 7510

Hi
I have and photosmart 7510 and i cant figure out how to change the setting so that when i print off the internet it is black and white only, that way I can save my color cartridges. In particular when i print coupons from the net, I only need them to be black and white.
Thanks for your help!

@432vero,
Go to your printer preferences on your computer.
1. Click Start menu
2. Choose Devices and Printers
3. Right click on the printer
4. Choose printer preferences
5. Choose ADVANCED
5. Choose "Print in all black text ENABLE" or "grey scale"
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

How to create black and white pdfs from autocad drawing

I am trying to create a pdf from autocad drawing with searchable text. Using the default acad pdf driver, it will create searchable text for only TT fonts with width set to 1.0. We use the monochrome plot settings so pdfs are all black, even if drawing was in color.
Using 'create pdf' from Acrobat Pro, Acrobat pro will create a pdf from the autocad drawing easily with all text searchable, shape fonts, TT fonts, no matter what the width. Fantastic. However, there is no option that I can see to create the pdf in just black and white. It creates the pdf in drawings original colors. How do I create a black and white pdf using acrobat pro? Thanks.

@gordon15
The only way to change the color of the printouts from your iPhone is through HP's free mobile app "HP ePrint Home&Biz". This is available in the App Store.
Simply download and install the app, choose a file to print from within the app, then press the icon at the bottom right of the screen that is a wrench and printer. This should then give you the option to choose the color output. Make your selection, press "Done", then press "Print."
If you are not seeing this option, you may need to setup ePrint for the printer and then register the app. This registration will also give you more functionality with the app.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Printer prints only black and white images from MacBook Air

I tried printing the same file with the PC and it prints ok. Whenever I print with our MacBook Air, it only prints black and white and yes it has a driver automatically installed and updated.
Printer model: HP Deskjet 4620 series

Hey ChloeAmby,
The article linked below details a number of troubleshooting steps that can help resolve issues with printing from your MacBook Air.
Get help resolving printer issues on your Mac
https://support.apple.com/en-us/HT203343
All my best,
Allen

Batch Black and White Conversions

Hi,
I've been trying to use the life and stamp tool to batch convert some images to black and white (using the monochrome mixer). Basically even trying to convert one image that way freezes my machine (powerbook 1.67 gH, 2 megs RAM) and I have to reboot.
Anybody have any suggestions....I guess this kind of batch conversion w. the lift and stamp tool must be very processor intensive? Even so....you'd think it could handle one! I did have some other adjustments on the image....filter, levels and sharpening.
Thanks a lot!
Lisa

Hello, lisa & scott
scott has some good advice for you except for one statement he made which is misleading and has been circulating around the mac internet news forums misleading readers and I would like a chance to squelch it once and for all:
Quote: "but really, this repair permissions action is starting to have a bit of "voodoo" status in OS X troubleshooting circles. i'm not sure that it will help with your slow-downs in Aperture though."
For the record, my recommendations are Apple text book troubleshooting regimens (Mac OS X Support Essentials, Owen Linzmayer, ©2006). I am an Apple Certified Pro Trainer, I help maintain the numerous mac computers in the classrooms where I teach. If this is voodoo, as scott is suggesting, then Apple has been totally wrong in recommending this systematic methodical troubleshooting regimen.
How do we answer any question in any forum as to why is this problem is happening to you? and not to others? or, maybe to others? There needs to be a starting base or instructions if the problem is not a known issue or if the problem cannot be verified on the systems on our end.
The recommendations I have made are painless, harmless and the least invasive. It will dump a lot of temporary files, font cache, get the OS X talking to it's respective files, directories, volumes, etc. it is the first step in finding out if the problem is
1. User-Related
2. Software-Related
3. OS-Related
4. Hardware-Related
Among other things some application problems can be OSX based and not the application itself. Repairing Disk Permissions in Safe Boot Mode is an excellent starting place.
As an example, many times when an application freezes or gets the spinning beachball, clicking on the Desktop and Repairing Permissions will clear the freeze and the beachball and quickly get you up and running again.
Besides this lisa, scott has given you some very good advice
Take care you two
love & peace,
victor

Black and white print from iphone ipad app

How can i print in black and white from ePrint or all in one app?

Hi,
As far as i'm aware there is no option to print in B/W from either app. As a workaround for this, I'd suggest opening the photo in the photo viewer on your iphone and select the edit function. From the list of filters available, select mono and this will give you a B/W print.
To return the photo to it's normal colour, select the filter "none".
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Multiple Black and white conversion from raw or jpgs

Similar Messages

Maybe you are looking for