Multiple bounded ranges in a progress bar

Hi,
Is it possible to show multiple bounded ranges in the same progress bar?
That is to say, can a progress bar display multiple values and extents in the same time?
Suppose a given task is split into 5 sub-tasks and I want to model the progress of each sub-task in the same progress bar. From the API, I can see that the JProgressBar is modeled by a single BoundedRangeModel (it has a minimum, maximum, value and an extent).
Any help or directions would be greatly appreciated.
Best Regards,
Kumar.

Similar Messages

One Progress Bar for Multiple Files

I am using XML via actionscripts to load image files from the
web server.
The site is a secure ecommerce site so I can not run any
scripts on the server side.
I want to find out the total size of all of the image files
to show a progress bar before I start the download.
So I need a way to request the size of each image file on the
web server???
Any suggestions?

Create a property node for each of the charts. Wire the controlling chart X scale maximum and minimum to the slave X scale max and min. (X Scale -> Range -> Max & Min).
Hope this helps.

Two progress bar joined or two diferent scale range in one progess bar!

Hello guys,
I try to get 2 diferent scales range in one progess bar. But I cant get it.
So, I tried to join 2 progess bar putting the fit scales to look similar like I want to. One from 0 to 100 and the second from 100 to 300.
In case I need to use 2 progress bar, the problem is the second start with mark in the start, I would like the second to be totally clear from 0.
Is it possible?.
Regards.
Solved!
Go to Solution.
Attachments:
progress_bar_joined.vi ‏10 KB

Alternatively, you could set the Fill Style. 0 is no fill while 1 is Fill To Min.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
progress_bar_joined(1).zip ‏8 KB

Progress bar shows multiple messages when sending one.

When I send a single email in Mail, the progress bar will often show "Sending 2 of 2 messages". Is it bundling and holding messages or sending multiples? I'm not sending to multiple addresses, unless my own and the recipient counts as two. Any explanation?

are you using an IMAP account? if so it's probably just mail syncing your sent mailbox with the server.

Multiple Progress Bar

Hi,
I am working with multiple(three) progress bar and a 'backgroundworker'. My application requires a functionality in which the second progress bar starts when the first progress bar attains 100% and similar for second and third progress bar.
Could anyone please guide how can it be achieved using backgroundworker. A code snippet for the same will be greatly helpful.
Thanks

On my form I have 3 progress bars and a button.
Obviously, the details of your particular form might be slightly different and your background worker will have to actually do something.
public partial class Form1 : Form
public Form1()
InitializeComponent();
private BackgroundWorker backgroundWorker1 = new BackgroundWorker();
private List<ProgressBar> bars;
private ProgressBar CurrentBar;
private void button1_Click(object sender, EventArgs e)
backgroundWorker1.RunWorkerAsync();
private void Form1_Load(object sender, EventArgs e)
bars = new List<ProgressBar> { progressBar1, progressBar2, progressBar3 };
backgroundWorker1.WorkerReportsProgress = true;
backgroundWorker1.DoWork += backgroundWorker1_DoWork;
backgroundWorker1.ProgressChanged += backgroundWorker1_ProgressChanged;
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
foreach (ProgressBar bar in bars)
CurrentBar = bar;
bar.Value = 0;
for (int i = 1; i <= 100; i++)
Thread.Sleep(10);
backgroundWorker1.ReportProgress(i);
private void backgroundWorker1_ProgressChanged(object sender, ProgressChangedEventArgs e)
CurrentBar.Value = e.ProgressPercentage;
Hope that helps.
Technet articles: Uneventful MVVM;
All my Technet Articles

Splash screen with progress bar and multiple jar files to load

Hello,
I have been looking to the new features in java 6 for splash screens. I haven't implemented this never before and i was wondering how i could do the following with java 1.5 or 6:
I would like to see a splash screen with a progress bar that "grows" when every jar file has been read.
At this time i call my application like this from a shell script:
exec "$JAVA_BIN" -Djava.library.path=$LIBRARIES_J3D -classpath xxxx.jar yyyy.jar zzzz.jar ...
where xxx.jar, yyy.jar and zzz.jar are very heavy jars.
So i would like to see in the progress bar 33% 66% and 100% when they are loaded.
I do not know if this is the right forum to ask for this. If no, please point me which would be the ideal one.
Any help will be very useful. Thanks to all!

Am 10.07.2015 um 07:17 schrieb Lalit Solanki:
> Hi friend,
>
> I am create pure eclipse E4 application and trying to splash screen with progress bar and message.
>
>
>
>
> but above image in only support eclipse E3 application so pleas help me how to add progress bar and message in eclipse E4 application
>
Hi Lalit,
there's a Bug entry: https://bugs.eclipse.org/bugs/show_bug.cgi?id=382224
Meanwhile you can use this solution:
https://www.eclipse.org/forums/index.php/t/328812/5ceed4bcaa683a94d65efb161bffd217/
Regards,
Ralf.

Copying multiple files (1000+) - Progress bar update is slow! Any ideas?

When I copy 1000+ raw files from any drive to another it takes a long time before the copy progress bar shows up, and some times it just takes a long time before the progress is updated. When it is updated, it has already copied alot of the files. Quite annoying, because you don't really get if it has begun copying, if it's hanging or what... Seems to me that the new per-file progress bar takes up too many ressources!
Btw I'm not on a slow system. 2.5 Quad core i7 MBP, 16GB RAM, OCZ Vertex 3 SSD...
Anyone got any ideas on this?

The progress bars have always been wonky. Can't judge a thing by them.
File feedback here.

Progress bar on startup

Hi Guys,
I keep getting a progress bar on startup. Not every time, but at least every few days. I've had this before since installing Mavericks and eventually my drive was not reparable in disk utility and I had to do a clean install and start from scratch.
I'm using a Macbook Pro 2012 with a Sandisk Ultra Plus SSD.
One thing I've noticed is that it seems to happen when I shutdown and close the lid of the macbook overnight and leave it unplugged. I'm not sure if this is a coincidence or not.
I'm not sure exactly what is causing this issue and I can't seem to find what it is from the log files. I've pasted my log file in below, hopefully there's someone out there who can see what it is!
22/11/13 8:50:32.000 am bootlog[0]: BOOT_TIME 1385081432 0
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am syslogd[20]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
22/11/13 8:51:08.000 am kernel[0]: Longterm timer threshold: 1000 ms
22/11/13 8:51:08.000 am kernel[0]: PMAP: PCID enabled
22/11/13 8:51:08.000 am kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
22/11/13 8:51:08.000 am kernel[0]: Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
22/11/13 8:51:08.000 am kernel[0]: vm_page_bootstrap: 3908857 free pages and 252679 wired pages
22/11/13 8:51:08.000 am kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
22/11/13 8:51:08.000 am kernel[0]: zone leak detection enabled
22/11/13 8:51:08.000 am kernel[0]: "vm_compressor_mode" is 4
22/11/13 8:51:08.000 am kernel[0]: standard timeslicing quantum is 10000 us
22/11/13 8:51:08.000 am kernel[0]: standard background quantum is 2500 us
22/11/13 8:51:08.000 am kernel[0]: mig_table_max_displ = 74
22/11/13 8:51:08.000 am kernel[0]: TSC Deadline Timer supported and enabled
22/11/13 8:51:08.000 am kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
22/11/13 8:51:08.000 am kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
22/11/13 8:51:08.000 am kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
22/11/13 8:51:08.000 am kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
22/11/13 8:51:08.000 am kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
22/11/13 8:51:08.000 am kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
22/11/13 8:51:08.000 am kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
22/11/13 8:51:08.000 am kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
22/11/13 8:51:08.000 am kernel[0]: calling mpo_policy_init for TMSafetyNet
22/11/13 8:51:08.000 am kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
22/11/13 8:51:08.000 am kernel[0]: calling mpo_policy_init for Sandbox
22/11/13 8:51:08.000 am kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
22/11/13 8:51:08.000 am kernel[0]: calling mpo_policy_init for Quarantine
22/11/13 8:51:08.000 am kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
22/11/13 8:51:08.000 am kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
22/11/13 8:51:08.000 am kernel[0]: The Regents of the University of California. All rights reserved.
22/11/13 8:51:08.000 am kernel[0]: MAC Framework successfully initialized
22/11/13 8:51:08.000 am kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
22/11/13 8:51:08.000 am kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
22/11/13 8:51:08.000 am kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
22/11/13 8:51:08.000 am kernel[0]: ACPI: sleep states S3 S4 S5
22/11/13 8:51:08.000 am kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0046
22/11/13 8:51:08.000 am kernel[0]: AppleIntelCPUPowerManagement: (built 22:16:38 Sep 19 2013) initialization complete
22/11/13 8:51:08.000 am kernel[0]: pci (build 22:16:29 Sep 19 2013), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
22/11/13 8:51:08.000 am kernel[0]: [ PCI configuration begin ]
22/11/13 8:51:08.000 am kernel[0]: console relocated to 0xf80000000
22/11/13 8:51:08.000 am kernel[0]: [ PCI configuration end, bridges 11, devices 15 ]
22/11/13 8:51:08.000 am kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
22/11/13 8:51:08.000 am kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
22/11/13 8:51:08.000 am kernel[0]: Pthread support ABORTS when sync kernel primitives misused
22/11/13 8:51:08.000 am kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 10ddb1fffe8da9e6; max speed s800.
22/11/13 8:51:08.000 am kernel[0]: rooting via boot-uuid from /chosen: 159A8D24-BC1B-3397-A3F5-A6F84517DC1A
22/11/13 8:51:08.000 am kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
22/11/13 8:51:08.000 am kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
22/11/13 8:51:08.000 am kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
22/11/13 8:51:08.000 am kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
22/11/13 8:51:08.000 am kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
22/11/13 8:51:08.000 am kernel[0]: AppleIntelCPUPowerManagementClient: ready
22/11/13 8:51:08.000 am kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/SanDisk SDSSDHP128G Media/IOGUIDPartitionScheme/Mavericks@2
22/11/13 8:51:08.000 am kernel[0]: BSD root: disk0s2, major 1, minor 3
22/11/13 8:51:08.000 am kernel[0]: BTCOEXIST off
22/11/13 8:51:08.000 am kernel[0]: BRCM tunables:
22/11/13 8:51:08.000 am kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
22/11/13 8:51:08.000 am kernel[0]: hfs: mounted Mavericks on device root_device
22/11/13 8:51:08.000 am kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
22/11/13 8:50:32.326 am com.apple.launchd[1]: *** launchd[1] has started up. ***
22/11/13 8:50:32.326 am com.apple.launchd[1]: *** Shutdown logging is enabled. ***
22/11/13 8:51:08.100 am com.apple.SecurityServer[17]: Session 100000 created
22/11/13 8:51:08.000 am kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
22/11/13 8:51:08.000 am kernel[0]: IO80211Interface::efiNVRAMPublished():
22/11/13 8:51:10.261 am com.apple.SecurityServer[17]: Entering service
22/11/13 8:51:10.000 am kernel[0]: Previous Shutdown Cause: 5
22/11/13 8:51:10.000 am kernel[0]: init
22/11/13 8:51:10.000 am kernel[0]: probe
22/11/13 8:51:10.000 am kernel[0]: start
22/11/13 8:51:10.000 am kernel[0]: [IOBluetoothHCIController][start] -- completed
22/11/13 8:51:10.000 am kernel[0]: IOBluetoothUSBDFU::probe
22/11/13 8:51:10.000 am kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821D FirmwareVersion - 0x0131
22/11/13 8:51:10.000 am kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x6400 ****
22/11/13 8:51:10.000 am kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x6400 ****
22/11/13 8:51:10.000 am kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x6400
22/11/13 8:51:10.428 am UserEventAgent[14]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
22/11/13 8:51:10.440 am UserEventAgent[14]: Captive: CNPluginHandler en1: Inactive
22/11/13 8:51:10.000 am kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
22/11/13 8:51:10.000 am kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x1400 -- 0xe800 -- 0x6400 ****
22/11/13 8:51:10.000 am kernel[0]: DSMOS has arrived
22/11/13 8:51:10.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:10.000 am kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
22/11/13 8:51:10.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:10.000 am kernel[0]: m_tail has not been written to hardware: m_tail = 0x00000000, hardare tail register = 0x00000060
22/11/13 8:51:10.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:10.000 am kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
22/11/13 8:51:10.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:10.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:11.000 am kernel[0]: VM Swap Subsystem is ON
22/11/13 8:51:11.108 am hidd[69]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
22/11/13 8:51:11.110 am hidd[69]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
22/11/13 8:51:11.156 am mDNSResponder[61]: mDNSResponder mDNSResponder-522.1.11 (Aug 24 2013 23:49:34) starting OSXVers 13
22/11/13 8:51:11.000 am kernel[0]: en2: promiscuous mode enable succeeded
22/11/13 8:51:11.247 am digest-service[86]: label: default
22/11/13 8:51:11.247 am digest-service[86]:           dbname: od:/Local/Default
22/11/13 8:51:11.247 am digest-service[86]:           mkey_file: /var/db/krb5kdc/m-key
22/11/13 8:51:11.247 am digest-service[86]:           acl_file: /var/db/krb5kdc/kadmind.acl
22/11/13 8:51:11.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:11.253 am digest-service[86]: digest-request: uid=0
22/11/13 8:51:11.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:11.345 am digest-service[86]: digest-request: netr probe 0
22/11/13 8:51:11.348 am digest-service[86]: digest-request: init request
22/11/13 8:51:11.432 am digest-service[86]: digest-request: init return domain: BUILTIN server: LOCALHOST indomain was: <NULL>
22/11/13 8:51:11.463 am com.apple.usbmuxd[45]: usbmuxd-323.1 on Oct 3 2013 at 12:43:24, running 64 bit
22/11/13 8:51:11.540 am loginwindow[64]: Login Window Application Started
22/11/13 8:51:11.587 am mDNSResponder[61]: D2D_IPC: Loaded
22/11/13 8:51:11.587 am mDNSResponder[61]: D2DInitialize succeeded
22/11/13 8:51:11.592 am mDNSResponder[61]:   4: Listening for incoming Unix Domain Socket client requests
22/11/13 8:51:11.606 am mDNSResponder[61]: mDNSMacOSXGetEtcHostsFD etc hosts does not exist, watching etc
22/11/13 8:51:11.692 am mds[60]: (Normal) FMW: FMW 0 0
22/11/13 8:51:11.729 am WindowServer[107]: Server is starting up
22/11/13 8:51:11.745 am WindowServer[107]: Session 256 retained (2 references)
22/11/13 8:51:11.746 am WindowServer[107]: Session 256 released (1 references)
22/11/13 8:51:11.789 am mDNSResponder[61]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 0000000000000001   lo0/4 to 224.0.0.251:5353 skt 8 error -1 errno 51 (Network is unreachable) 5028209798 MessageCount is 1
22/11/13 8:51:11.798 am awacsd[81]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
22/11/13 8:51:11.803 am WindowServer[107]: Session 256 retained (2 references)
22/11/13 8:51:11.808 am WindowServer[107]: init_page_flip: page flip mode is on
22/11/13 8:51:11.811 am awacsd[81]: InnerStore CopyAllZones: no info in Dynamic Store
22/11/13 8:51:11.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:11.000 am kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x6400 ****
22/11/13 8:51:11.000 am kernel[0]: Network delay is not specified! Defaulting to 0x384
22/11/13 8:51:11.923 am WindowServer[107]: Found 16 modes for display 0x00000000 [8, 8]
22/11/13 8:51:11.926 am apsd[83]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
22/11/13 8:51:11.930 am WindowServer[107]: Found 1 modes for display 0x00000000 [1, 0]
22/11/13 8:51:11.934 am WindowServer[107]: Found 1 modes for display 0x00000000 [1, 0]
22/11/13 8:51:11.937 am WindowServer[107]: Found 1 modes for display 0x00000000 [1, 0]
22/11/13 8:51:11.943 am WindowServer[107]: mux_initialize: Couldn't find any matches
22/11/13 8:51:11.946 am WindowServer[107]: Found 16 modes for display 0x00000000 [8, 8]
22/11/13 8:51:11.952 am WindowServer[107]: Found 1 modes for display 0x00000000 [1, 0]
22/11/13 8:51:11.953 am WindowServer[107]: Found 1 modes for display 0x00000000 [1, 0]
22/11/13 8:51:11.953 am WindowServer[107]: Found 1 modes for display 0x00000000 [1, 0]
22/11/13 8:51:11.972 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:11.989 am WindowServer[107]: WSMachineUsesNewStyleMirroring: true
22/11/13 8:51:11.990 am WindowServer[107]: Display 0x042732c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 16 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ccb, S/N 0, Unit 0, Rotation 0
UUID 0x4f159f59a71d63aefce94e26fc6d6edd
22/11/13 8:51:11.990 am WindowServer[107]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[1920 x 1200], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
22/11/13 8:51:11.990 am WindowServer[107]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
22/11/13 8:51:11.990 am WindowServer[107]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
22/11/13 8:51:11.990 am WindowServer[107]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
22/11/13 8:51:12.002 am WindowServer[107]: WSSetWindowTransform: Singular matrix
22/11/13 8:51:12.002 am WindowServer[107]: WSSetWindowTransform: Singular matrix
22/11/13 8:51:12.003 am WindowServer[107]: WSSetWindowTransform: Singular matrix
22/11/13 8:51:12.018 am WindowServer[107]: Display 0x042732c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 16 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ccb, S/N 0, Unit 0, Rotation 0
UUID 0x4f159f59a71d63aefce94e26fc6d6edd
22/11/13 8:51:12.019 am WindowServer[107]: Display 0x003f0040: GL mask 0x10; bounds (2304, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
22/11/13 8:51:12.019 am WindowServer[107]: Display 0x003f003f: GL mask 0x8; bounds (2305, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
22/11/13 8:51:12.019 am WindowServer[107]: Display 0x003f003e: GL mask 0x4; bounds (2306, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
22/11/13 8:51:12.019 am WindowServer[107]: Display 0x003f003d: GL mask 0x2; bounds (2307, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
22/11/13 8:51:12.019 am WindowServer[107]: CGXPerformInitialDisplayConfiguration
22/11/13 8:51:12.019 am WindowServer[107]:   Display 0x042732c0: Unit 0; Vendor 0x610 Model 0x9ccb S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
22/11/13 8:51:12.020 am WindowServer[107]:   Display 0x003f0040: Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
22/11/13 8:51:12.020 am WindowServer[107]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2305,0)[1 x 1], Rotation 0, Resolution 1
22/11/13 8:51:12.020 am WindowServer[107]:   Display 0x003f003e: Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2306,0)[1 x 1], Rotation 0, Resolution 1
22/11/13 8:51:12.021 am WindowServer[107]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2307,0)[1 x 1], Rotation 0, Resolution 1
22/11/13 8:51:12.027 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:12.033 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:12.058 am systemkeychain[91]: done file: /var/run/systemkeychaincheck.done
22/11/13 8:51:12.061 am mDNSResponder[61]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 0000000000000001   lo0/4 to 224.0.0.251:5353 skt 8 error -1 errno 51 (Network is unreachable) 5028210070 MessageCount is 2
22/11/13 8:51:12.068 am mtmfs[58]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:12.080 am WindowServer[107]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000001f, accelerator 0x000048bb, unit 0, caps QEX|MIPMAP, vram 1024 MB
22/11/13 8:51:12.081 am WindowServer[107]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000001f, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
22/11/13 8:51:12.081 am WindowServer[107]: GLCompositor enabled for tile size [256 x 256]
22/11/13 8:51:12.081 am WindowServer[107]: CGXGLInitMipMap: mip map mode is on
22/11/13 8:51:12.093 am loginwindow[64]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
22/11/13 8:51:12.185 am networkd[119]: networkd.119 built Aug 24 2013 22:08:46
22/11/13 8:51:12.199 am locationd[66]: NBB-Could not get UDID for stable refill timing, falling back on random
22/11/13 8:51:12.229 am airportd[85]: airportdProcessDLILEvent: en1 attached (down)
22/11/13 8:51:12.232 am locationd[66]: Location icon should now be in state 'Inactive'
22/11/13 8:51:12.000 am kernel[0]: createVirtIf(): ifRole = 1
22/11/13 8:51:12.000 am kernel[0]: in func createVirtualInterface ifRole = 1
22/11/13 8:51:12.000 am kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
22/11/13 8:51:12.000 am kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
22/11/13 8:51:12.000 am kernel[0]: Created virtif 0xffffff8044e81400 p2p0
22/11/13 8:51:12.254 am WindowServer[107]: Display 0x042732c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
22/11/13 8:51:12.333 am launchctl[122]: com.apple.findmymacmessenger: Already loaded
22/11/13 8:51:12.378 am mDNSResponder[61]: mDNSPlatformSendUDP: sendto(8) failed to send packet on InterfaceID 0000000000000001   lo0/4 to 224.0.0.251:5353 skt 8 error -1 errno 51 (Network is unreachable) 5028210387 MessageCount is 3
22/11/13 8:51:12.000 am kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
22/11/13 8:51:12.418 am com.apple.SecurityServer[17]: Session 100004 created
22/11/13 8:51:12.497 am loginwindow[64]: Setting the initial value of the magsave brightness level 1
22/11/13 8:51:12.552 am loginwindow[64]: Login Window Started Security Agent
22/11/13 8:51:12.565 am configd[21]: dhcp_arp_router: en1 SSID unavailable
22/11/13 8:51:12.565 am configd[21]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Network is down (50)
22/11/13 8:51:12.566 am configd[21]: DHCP en1: INIT-REBOOT transmit failed
22/11/13 8:51:12.606 am configd[21]: network changed: DNS*
22/11/13 8:51:12.607 am configd[21]: setting hostname to "Gareths-MacBook-Pro.local"
22/11/13 8:51:12.000 am kernel[0]: hfs: mounted DATA on device disk1s3
22/11/13 8:51:12.809 am SecurityAgent[140]: This is the first run
22/11/13 8:51:12.809 am SecurityAgent[140]: MacBuddy was run = 0
22/11/13 8:51:12.833 am WindowServer[107]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042732c0 device: 0x7fa22341bd70 isBackBuffered: 1 numComp: 3 numDisp: 3
22/11/13 8:51:12.834 am WindowServer[107]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fa22341bd70) - enabling OpenGL
22/11/13 8:51:12.840 am UserEventAgent[124]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
22/11/13 8:51:12.000 am kernel[0]: NTFS driver 3.11 [Flags: R/W].
22/11/13 8:51:12.929 am SecurityAgent[140]: User info context values set for gareth
22/11/13 8:51:13.000 am kernel[0]: hfs: mounted Recovery HD on device disk0s3
22/11/13 8:51:13.236 am mds[60]: (Normal) Volume: volume:0x7f8bb2053800 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
22/11/13 8:51:13.290 am fseventsd[70]: Logging disabled completely for device:1: /Volumes/Recovery HD
22/11/13 8:51:13.386 am loginwindow[64]: Login Window - Returned from Security Agent
22/11/13 8:51:13.428 am loginwindow[64]: USER_PROCESS: 64 console
22/11/13 8:51:13.000 am kernel[0]: nspace-handler-set-snapshot-time: 1385081475
22/11/13 8:51:13.441 am com.apple.mtmd[59]: Set snapshot time: 2013-11-22 08:51:15 +0800 (current time: 2013-11-22 08:51:13 +0800)
22/11/13 8:51:13.000 am kernel[0]: AppleKeyStore:Sending lock change 0
22/11/13 8:51:13.000 am kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
22/11/13 8:51:13.608 am mtmfs[58]: MTM fs Mount server retrying ...
22/11/13 8:51:13.608 am mtmfs[58]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:13.626 am com.apple.launchd.peruser.501[158]: Background: Aqua: Registering new GUI session.
22/11/13 8:51:13.664 am com.apple.launchd.peruser.501[158]: (com.apple.cmfsyncagent) Ignored this key: UserName
22/11/13 8:51:13.665 am com.apple.launchd.peruser.501[158]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
22/11/13 8:51:13.666 am com.apple.launchd.peruser.501[158]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
22/11/13 8:51:13.671 am launchctl[161]: com.apple.pluginkit.pkd: Already loaded
22/11/13 8:51:13.672 am launchctl[161]: com.apple.sbd: Already loaded
22/11/13 8:51:13.000 am kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
22/11/13 8:51:13.706 am distnoted[163]: # distnote server agent absolute time: 42.115652323   civil time: Fri Nov 22 08:51:13 2013   pid: 163 uid: 501 root: no
22/11/13 8:51:13.000 am kernel[0]: en1: 802.11d country code set to 'HK'.
22/11/13 8:51:13.000 am kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
22/11/13 8:51:13.934 am com.apple.SecurityServer[17]: Session 100006 created
22/11/13 8:51:13.976 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
22/11/13 8:51:14.003 am WindowServer[107]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
22/11/13 8:51:14.101 am WindowServer[107]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
22/11/13 8:51:14.118 am mds[60]: (Normal) Volume: volume:0x7f8bb2833800 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/BOOTCAMP
22/11/13 8:51:14.394 am WindowServer[107]: Display 0x042732c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
22/11/13 8:51:14.435 am WindowServer[107]: Display 0x042732c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
22/11/13 8:51:14.690 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
22/11/13 8:51:14.691 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
22/11/13 8:51:14.691 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
22/11/13 8:51:14.691 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
22/11/13 8:51:14.691 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
22/11/13 8:51:14.691 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
22/11/13 8:51:14.691 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
22/11/13 8:51:14.691 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
22/11/13 8:51:14.692 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
22/11/13 8:51:14.692 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
22/11/13 8:51:14.692 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
22/11/13 8:51:14.692 am com.apple.audio.DriverHelper[184]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
22/11/13 8:51:14.810 am com.apple.audio.DriverHelper[184]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
22/11/13 8:51:14.810 am com.apple.audio.DriverHelper[184]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
22/11/13 8:51:14.811 am com.apple.audio.DriverHelper[184]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
22/11/13 8:51:14.895 am coreaudiod[173]: 2013-11-22 08:51:14.894059 AM [AirPlay] AirPlay: Performing audio format change for 4 (AP Out) to PCM, 44100 Hz, 16-bit, Stereo
22/11/13 8:51:14.984 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:15.108 am mtmfs[58]: MTM fs Mount server retrying ...
22/11/13 8:51:15.109 am mtmfs[58]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:15.131 am sharingd[190]: Starting Up...
22/11/13 8:51:15.244 am com.apple.IconServicesAgent[194]: IconServicesAgent launched.
22/11/13 8:51:15.554 am SystemUIServer[169]: Cannot find executable for CFBundle 0x7fb3f8551950 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
22/11/13 8:51:15.635 am SystemUIServer[169]: Cannot find executable for CFBundle 0x7fb3f854dd30 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
22/11/13 8:51:15.636 am SystemUIServer[169]: Cannot find executable for CFBundle 0x7fb3f851a2a0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
22/11/13 8:51:15.788 am UserEventAgent[162]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
22/11/13 8:51:15.847 am WindowServer[107]: Display 0x042732c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
22/11/13 8:51:15.880 am revisiond[53]: objc[53]: Class GSLockToken is implemented in both /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Supp ort/revisiond and /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage. One of the two will be used. Which one is undefined.
22/11/13 8:51:16.000 am kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=218[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
22/11/13 8:51:16.140 am SystemUIServer[169]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
22/11/13 8:51:16.140 am SystemUIServer[169]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
22/11/13 8:51:16.609 am mtmfs[58]: MTM fs Mount server retrying ...
22/11/13 8:51:16.610 am mtmfs[58]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:16.887 am com.apple.SecurityServer[17]: Session 100009 created
22/11/13 8:51:16.896 am accountsd[229]: assertion failed: 13A603: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
22/11/13 8:51:17.009 am xpcproxy[232]: assertion failed: 13A603: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
22/11/13 8:51:17.037 am PlexHelper[217]: PlexHelper 0.7 starting up...
22/11/13 8:51:17.079 am com.apple.launchd.peruser.501[158]: (com.apple.mrt.uiagent[205]) Exited with code: 255
22/11/13 8:51:17.223 am apsd[83]: Unexpected connection from logged out uid 501
22/11/13 8:51:17.392 am xpcproxy[235]: assertion failed: 13A603: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
22/11/13 8:51:17.960 am com.apple.time[162]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
22/11/13 8:51:17.966 am com.apple.time[162]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
22/11/13 8:51:18.110 am mtmfs[58]: MTM fs Mount server retrying ...
22/11/13 8:51:18.144 am com.apple.dock.extra[195]: <NSXPCConnection: 0x7ff2a363a550>: received an undecodable message (no exported object to receive message). Dropping message.
22/11/13 8:51:18.245 am com.apple.SecurityServer[17]: Session 100012 created
22/11/13 8:51:18.252 am mtmfs[58]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:18.504 am WiFiKeychainProxy[201]: [NO client logger] <Aug 30 2013 23:40:46> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
22/11/13 8:51:18.505 am WiFiKeychainProxy[201]: [NO client logger] <Aug 30 2013 23:40:46> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
22/11/13 8:51:18.558 am accountsd[229]: /SourceCache/Accounts/Accounts-336.9/ACDAuthenticationPluginManager.m - -[ACDAuthenticationPluginManager credentialForAccount:client:handler:] - 230 - The authentication plugin for account "[email protected]" (F14ADF42-657D-4C7F-B172-209A645CFA51) could not be found!
22/11/13 8:51:18.558 am accountsd[229]: /SourceCache/Accounts/Accounts-336.9/ACDAccountStore.m - __62-[ACDAccountStore credentialForAccountWithIdentifier:handler:]_block_invoke389 - 857 - No plugin provides credentials for account [email protected]. Falling back to legacy behavior.
22/11/13 8:51:18.891 am com.apple.NotesMigratorService[242]: Joined Aqua audit session
22/11/13 8:51:18.000 am kernel[0]: MacAuthEvent en1   Auth result for: f8:1a:67:be:21:7a MAC AUTH succeeded
22/11/13 8:51:18.000 am kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
22/11/13 8:51:18.000 am kernel[0]: AirPort: Link Up on en1
22/11/13 8:51:18.000 am kernel[0]: en1: BSSID changed to f8:1a:67:be:21:7a
22/11/13 8:51:18.000 am kernel[0]: AirPort: RSN handshake complete on en1
22/11/13 8:51:19.112 am com.apple.internetaccounts[235]: com.apple.internetaccounts(235,0x1165e5000) malloc: *** error for object 0x9000000000000006: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
22/11/13 8:51:19.210 am com.apple.iCloudHelper[232]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
    "Accept-Language" = "en-us";
    "X-Mme-Client-Info" = "<MacBookPro9,2> <Mac OS X;10.9;13A603> <com.apple.AOSKit/176>";
    "X-Mme-Country" = HK;
    "X-Mme-Nac-Version" = 11A457;
    "X-Mme-Timezone" = HKT;
error=Error Domain=kCFErrorDomainCFNetwork Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fc5b0c3a1f0 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
22/11/13 8:51:19.253 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:19.284 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:19.286 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:19.307 am gamed[227]: CKSoftwareMap: Registering with Daemon
22/11/13 8:51:19.383 am com.apple.time[162]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
22/11/13 8:51:19.000 am kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
22/11/13 8:51:19.610 am AddressBookSourceSync[225]: [CardDAVPlugin-ERROR] -getPrincipalInfo:[_controller supportsRequestCompressionAtURL:https://gareth%[email protected]/1021024264/principal///gareth%[email protected]/1021024264/principal/] Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7feb9bd74760 {NSUnderlyingError=0x7feb9bf4cf60 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://gareth%[email protected]/1021024264/principal///gareth%[email protected]/1021024264/principal/, NSErrorFailingURLKey=https://gareth%[email protected]/1021024264/principal///gareth%[email protected]/1021024264/principal/, NSLocalizedDescription=The Internet connection appears to be offline.}
22/11/13 8:51:19.752 am mtmfs[58]: MTM fs Mount server retrying ...
22/11/13 8:51:19.752 am mtmfs[58]: MTM fs Mount server failed to start because of too many retries
22/11/13 8:51:19.752 am mtmfs[58]: MTM fs Mount server failed, last error -1
22/11/13 8:51:19.761 am com.apple.launchd[1]: (com.apple.mtmfs[58]) Exited with code: 99
22/11/13 8:51:19.761 am com.apple.launchd[1]: (com.apple.mtmfs) Throttling respawn: Will start in 2 seconds
22/11/13 8:51:19.786 am com.apple.iCloudHelper[232]: AOSKit ERROR: Config request failed, url=https://setup.icloud.com/configurations/init, requestHeaders=
    "Accept-Language" = "en-us";
    "X-Mme-Client-Info" = "<MacBookPro9,2> <Mac OS X;10.9;13A603> <com.apple.AOSKit/176>";
    "X-Mme-Country" = HK;
    "X-Mme-Nac-Version" = 11A457;
    "X-Mme-Timezone" = HKT;
error=Error Domain=kCFErrorDomainCFNetwork Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fc5b0e02510 {NSErrorFailingURLStringKey=https://setup.icloud.com/configurations/init, NSLocalizedDescription=The Internet connection appears to be offline., NSErrorFailingURLKey=https://setup.icloud.com/configurations/init}, httpStatusCode=-1, responseHeaders=
(null)
22/11/13 8:51:19.790 am com.apple.iCloudHelper[232]: AOSKit ERROR: Setup request failed, appleID=1021024264, url=(null), requestHeaders=
(null),
error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7fc5b0c3b950 {HttpStatusCode=0, DialogInfo={
    DialogType = Unknown;
}}, httpStatusCode=0, responseHeaders=
(null),
responseBody=
(null)
22/11/13 8:51:19.856 am ReportCrash[244]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
22/11/13 8:51:20.335 am airportd[85]: _doAutoJoin: Already associated to “Hawking”. Bailing on auto-join.
22/11/13 8:51:20.461 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:20.498 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:21.221 am Dropbox[223]: PyObjCPointer created: at 0xaf3fc88 of type {OpaqueJSContext=}
22/11/13 8:51:21.279 am mds[60]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
22/11/13 8:51:21.854 am mtmfs[254]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:22.929 am syncdefaultsd[224]: *** remoteObjectProxyWithErrorHandler failed: Error Domain=NSCocoaErrorDomain Code=4097 "Couldn’t communicate with a helper application."; {
22/11/13 8:51:22.931 am CalendarAgent[213]: *** remoteObjectProxyWithErrorHandler failed: Error Domain=NSCocoaErrorDomain Code=4097 "Couldn’t communicate with a helper application."; {
22/11/13 8:51:22.932 am CalendarAgent[213]: *** remoteObjectProxyWithErrorHandler failed: Error Domain=NSCocoaErrorDomain Code=4097 "Couldn’t communicate with a helper application."; {
22/11/13 8:51:22.936 am com.apple.launchd[1]: (com.apple.internetaccounts[235]) Job appears to have crashed: Abort trap: 6
22/11/13 8:51:23.191 am ReportCrash[244]: Saved crash report for com.apple.internetaccounts[235] version 1.0 (1) to /Library/Logs/DiagnosticReports/com.apple.internetaccounts_2013-11-22-085123_Ga reths-MacBook-Pro.crash
22/11/13 8:51:23.402 am mtmfs[254]: MTM fs Mount server retrying ...
22/11/13 8:51:23.402 am mtmfs[254]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:23.674 am mds_stores[114]: (Error) SecureStore: Access token 6 changed uid from -1 to 501
22/11/13 8:51:24.971 am mtmfs[254]: MTM fs Mount server retrying ...
22/11/13 8:51:24.972 am mtmfs[254]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:26.529 am mtmfs[254]: MTM fs Mount server retrying ...
22/11/13 8:51:26.529 am mtmfs[254]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:26.698 am parentalcontrolsd[266]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
22/11/13 8:51:26.821 am awacsd[81]: Exiting
22/11/13 8:51:28.094 am mtmfs[254]: MTM fs Mount server retrying ...
22/11/13 8:51:28.095 am mtmfs[254]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:29.149 am AddressBookSourceSync[225]: [CardDAVPlugin-ERROR] -getPrincipalInfo:[_controller supportsRequestCompressionAtURL:https://gareth%[email protected]/1021024264/principal///gareth%[email protected]/1021024264/principal/] Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7feb9be40570 {NSUnderlyingError=0x7feb9bf34660 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://gareth%[email protected]/1021024264/principal///gareth%[email protected]/1021024264/principal/, NSErrorFailingURLKey=https://gareth%[email protected]/1021024264/principal///gareth%[email protected]/1021024264/principal/, NSLocalizedDescription=The Internet connection appears to be offline.}
22/11/13 8:51:29.668 am mtmfs[254]: MTM fs Mount server retrying ...
22/11/13 8:51:29.669 am mtmfs[254]: MTM fs Mount server failed to start because of too many retries
22/11/13 8:51:29.669 am mtmfs[254]: MTM fs Mount server failed, last error -1
22/11/13 8:51:29.671 am com.apple.launchd[1]: (com.apple.mtmfs[254]) Exited with code: 99
22/11/13 8:51:29.671 am com.apple.launchd[1]: (com.apple.mtmfs) Throttling respawn: Will start in 3 seconds
22/11/13 8:51:30.316 am com.apple.IconServicesAgent[194]: main Failed to composit image for binding VariantBinding [0x211] flags: 0x8 binding: FileInfoBinding [0x111] - extension: jpg, UTI: public.jpeg, fileType: ????.
22/11/13 8:51:30.317 am quicklookd[193]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xe03] flags: 0x8 binding: FileInfoBinding [0xd03] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:16 scale: 1
22/11/13 8:51:31.251 am com.apple.InputMethodKit.UserDictionary[273]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: gareth~BC4B5F87-774E-5569-BE83-2926411DBD09:UserDictionary
Using local storage: 1
22/11/13 8:51:31.461 am com.apple.InputMethodKit.UserDictionary[273]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: gareth~BC4B5F87-774E-5569-BE83-2926411DBD09:UserDictionary
Using local storage: 0
22/11/13 8:51:32.416 am com.apple.SecurityServer[17]: Session 100016 created
22/11/13 8:51:32.810 am mtmfs[275]: MTM fs Mount server failed to start because of error -1
22/11/13 8:51:33.957 am com.apple.IconServicesAgent[194]: main Failed to composit image for binding VariantBinding [0x115] flags: 0x8 binding: FileInfoBinding [0x215] - extension: mp3, UTI: public.mp3, fileType: MPG3.
22/11/13 8:51:33.957 am quicklookd[193]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1403] flags: 0x8 binding: FileInfoBinding [0x1303] - extension: mp3, UTI: public.mp3, fileType: MPG3 request size:16 scale: 1
22/11/13 8:51:34.043 am configd[21]: network changed: DNS* Proxy
22/11/13 8:51:34.043 am UserEventAgent[14]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Hawking' making interface primary (protected network)
22/11/13 8:51:34.045 am UserEventAgent[14]: Captive: CNPluginHandler en1: Evaluating
22/11/13 8:51:34.047 am UserEventAgent[14]: Captive: en1: Probing 'Hawking'
22/11/13 8:51:34.058 am configd[21]: network changed: v4(en1!:192.168.1.107) DNS+ Proxy+ SMB
22/11/13 8:51:34.077 am com.apple.IconServicesAgent[194]: main Failed to composit image for binding VariantBinding [0x217] flags: 0x8 binding: FileInfoBinding [0x117] - extension: ai, UTI: com.adobe.illustrator.ai-image, fileType: PDF .
22/11/13 8:51:34.078 am quicklookd[193]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1603] flags: 0x8 binding: FileInfoBinding [0x1503] - extension: ai, UTI: com.adobe.illustrator.ai-image, fileType: PDF request size:16 scale: 1
22/11/13 8:51:34.086 am configd[21]: setting hostname to "gareths-mbp"
22/11/13 8:51:34.104 am UserEventAgent[14]: Captive: CNPluginHandler en1: Authenticated
22/11/13 8:51:34.314 am com.apple.time[162]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
22/11/13 8:51:34.355 am ntpd[109]: proto: precision = 1.000 usec
22/11/13 8:51:34.370 am mtmfs[275]: MTM fs Mount server retrying ...
22/11/13 8:51:34.845 am com.apple.IconServicesAgent[194]: main Failed to composit image for binding VariantBinding [0x21b] flags: 0x8 binding: FileInfoBinding [0x119] - extension: m4a, UTI: com.apple.m4a-audio, fileType: ????.
22/11/13 8:51:34.845 am quicklookd[193]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1803] flags: 0x8 binding: FileInfoBinding [0x1703] - extension: m4a, UTI: com.apple.m4a-audio, fileType: ???? request size:16 scale: 1
22/11/13 8:51:37.294 am com.apple.IconServicesAgent[194]: main Failed to composit image for binding VariantBinding [0x11b] flags: 0x8 binding: FileInfoBinding [0x21d] - extension: mp4, UTI: public.mpeg-4, fileType: ????.
22/11/13 8:51:37.295 am quicklookd[193]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1a03] flags: 0x8 binding: FileInfoBinding [0x1903] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
22/11/13 8:51:37.307 am com.apple.IconServicesAgent[194]: main Failed to composit image for binding VariantBinding [0x21f] flags: 0x8 binding: FileInfoBinding [0x11d] - extension: pptx, UTI: org.openxmlformats.presentationml.presentation, fileType: ????.
22/11/13 8:51:37.308 am quicklookd[193]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1c03] flags: 0x8 binding: FileInfoBinding [0x1b03] - extension: pptx, UTI: org.openxmlformats.presentationml.presentation, fileType: ???? request size:16 scale: 1
22/11/13 8:51:37.581 am syncdefaultsd[224]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
22/11/13 8:51:37.000 am kernel[0]: fsevents: watcher dbfseventsd (pid: 288) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
22/11/13 8:51:39.328 am digest-service[86]: digest-request: uid=0
22/11/13 8:51:39.328 am digest-service[86]: digest-request: init request
22/11/13 8:51:39.335 am digest-service[86]: digest-request: init return domain: MACBOOKPRO-BFDB server: GARETHS-MBP indomain was: <NULL>
22/11/13 8:51:39.360 am com.apple.IconServicesAgent[194]: main Failed to composit image for binding VariantBinding [0x223] flags: 0x8 binding: FileInfoBinding [0x11f] - extension: ppt, UTI: com.microsoft.powerpoint.ppt, fileType: ????.
22/11/13 8:51:39.360 am quicklookd[193]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1e03] flags: 0x8 binding: FileInfoBinding [0x1d03] - extension: ppt, UTI: com.microsoft.powerpoint.ppt, fileType: ???? request size:16 scale: 1
22/11/13 8:51:39.380 am digest-service[86]: digest-request: uid=0
22/11/13 8:51:39.380 am digest-service[86]: digest-request: init request
22/11/13 8:51:39.385 am digest-service[86]: digest-request: init return domain: GARETHS-MBP server: GARETHS-MBP indomain was: <NULL>
22/11/13 8:51:39.585 am mtmfs[275]: mount failed for /Volumes/MobileBackups
22/11/13 8:51:39.588 am com.apple.launchd[1]: (com.apple.mtmfs[275]) Exited with code: 22
22/11/13 8:51:39.588 am com.apple.launchd[1]: (com.apple.mtmfs) Throttling respawn: Will start in 4 seconds
22/11/13 8:51:41.759 am Dropbox[223]: ICARegisterForEventNotification-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
22/11/13 8:51:45.429 am Google Chrome[308]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:45.000 am kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=310[ksadmin] final status 0x0, allow (remove VALID)ing page
22/11/13 8:51:45.000 am kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=312[ksadmin] final status 0x0, allow (remove VALID)ing page
22/11/13 8:51:45.719 am Google Chrome Helper[311]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:45.924 am Google Chrome Helper[313]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:46.092 am Google Chrome Helper[313]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #426 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_bl ock_invoke() q=com.apple.main-thread
22/11/13 8:51:46.093 am Google Chrome Helper[313]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
22/11/13 8:51:46.112 am Google Chrome Helper[313]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
22/11/13 8:51:46.147 am Google Chrome Helper[314]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:46.349 am Google Chrome Helper[314]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #426 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_bl ock_invoke() q=com.apple.main-thread
22/11/13 8:51:46.349 am Google Chrome Helper[314]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
22/11/13 8:51:46.361 am Google Chrome Helper[314]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
22/11/13 8:51:46.542 am Google Chrome Helper[315]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:46.597 am Google Chrome Helper[316]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:46.677 am Google Chrome Helper[317]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:46.682 am Google Chrome Helper[315]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #426 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_bl ock_invoke() q=com.apple.main-thread
22/11/13 8:51:46.683 am Google Chrome Helper[315]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
22/11/13 8:51:46.694 am Google Chrome Helper[315]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
22/11/13 8:51:46.732 am Google Chrome Helper[316]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #426 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_bl ock_invoke() q=com.apple.main-thread
22/11/13 8:51:46.732 am Google Chrome Helper[316]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
22/11/13 8:51:46.744 am Google Chrome Helper[316]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
22/11/13 8:51:46.823 am Google Chrome Helper EH[318]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:46.826 am Google Chrome Helper[317]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #426 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_bl ock_invoke() q=com.apple.main-thread
22/11/13 8:51:46.826 am Google Chrome Helper[317]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
22/11/13 8:51:46.837 am Google Chrome Helper[317]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
22/11/13 8:51:47.060 am Google Chrome Helper[319]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:47.083 am xpcproxy[320]: assertion failed: 13A603: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
22/11/13 8:51:47.241 am Google Chrome Helper[319]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #426 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_bl ock_invoke() q=com.apple.main-thread
22/11/13 8:51:47.241 am Google Chrome Helper[319]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
22/11/13 8:51:47.252 am Google Chrome Helper[319]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
22/11/13 8:51:47.566 am com.apple.NotesMigratorService[242]: Joined Aqua audit session
22/11/13 8:51:47.599 am com.apple.time[162]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
22/11/13 8:51:47.719 am icbaccountsd[267]: -[ICBLocalDictionary writeLocalMapping:]: Status: Writing out local mapping to disk
22/11/13 8:51:47.719 am icbaccountsd[267]: -[ICBLocalDictionary writeLocalMapping:]: Status: Ending writing out local mapping to disk
22/11/13 8:51:47.719 am icbaccountsd[267]: -[ICBRemoteDictionary writeDevices]: Status: Writing out of devices
22/11/13 8:51:47.720 am icbaccountsd[267]: -[ICBRemoteDictionary writeDevices]: Status: Ending writing out of device
22/11/13 8:51:48.003 am Google Chrome Helper[321]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
22/11/13 8:51:48.135 am fontd[187]: BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
22/11/13 8:51:48.135 am Google Chrome Helper[314]: CoreText CopyFontsForRequest received mig IPC error (FFFFFECC) from font server
22/11/13 8:51:48.135 am Google Chrome Helper[314]: CoreText CopyFontsForRequest received mig IPC error (FFFFFECC) from font server
22/11/13 8:51:48.137 am Google Chrome Helper[314]: CoreText CopyFontsForRequest received mig IPC error (FFFFFECC) from font server
22/11/13 8:51:48.137 am Google Chrome Helper[314]: CoreText CopyFontsForRequest received mig IPC error (FFFFFECC) from font server
22/11/13 8:51:48.147 am Google Chrome Helper[314]: CoreText CopyFontsForRequest received mig IPC error (FFFFFECC) from font server
22/11/13 8:51:48.148 am Google Chrome Helper[314]: CoreText CopyFontsForRequest received mig IPC error (FFFFFECC) from font server
22/11/13 8:51:48.152 am Google Chrome Helper[314]: CoreText CopyFontsForRequest received mig IPC error (FFFFFECC) from font server
22/11/13 8:51:48.152 am Google Chrome Helper[314]: CoreText CopyFontsForRequest received mig IPC error (FFFFFECC) from font server
22/11/13 8:

The progress bar usually means your Mac is booting into the Safe Boot startup, Safe Mode.
Do you see "Safe Boot" in the upper right hand corner of the screen.

[SOLVED] Almost there just need a global progress bar

Heya,
There's no man page for bar so I have looked at the code a bit. I am trying to have a progress bar to copy a folder with many files including symbolic links (unfortunately pycp does not support them yet). With the -s parameter, I can specify the approximate size of what I am copying but it works only if it is a single file.
I have also tried pv, pipemeter, orphan advcp, ecp, scp and I am now desperate.
Would someone be kind enough to help me ?
[tamikana@archlinux ~]$ cat /usr/bin/bar
#! /bin/sh
# bar
# 'cat' with ASCII progress bar
# (c) Henrik Theiling
BAR_VERSION=1.4
# Synopsis:
# 'bar' works just like 'cat', but shows a progress bar in ASCII art on stderr.
# The script's main function is meant to be usable in any Bourne shell to be
# suitable for install scripts without the need for any additional tool.
# Shell Script Usage: bar [options] [files]
# Options:
# -h displays help
# Examples:
# Normal pipe:
# : bar mypack.tar.bz2 | tar xjpf -
# Individual pipe for each file:
# : bar -c 'tar xjpf -' mypack1.tar.bz2 mypack2.tar.bz2
# Individual pipe, using ${bar_file} variable:
# : bar -c 'echo ${bar_file}: ; gzip -dc | tar tvf -' \
# : -e .tar.gz \
# : file1 file2 file3 file4 file5 \
# : > package-list.txt
# Programs and shell commands:
# Required (otherwise this fails):
# if, then, else, fi, expr, test, cat, eval, exec
# shell functions
# test:
# a = b
# a -lt b
# a -gt b
# a -le b
# -f a
# -n a
# -z a
# expr:
# a + b
# a - b
# a '*' b
# a / b
# a : b
# Optional (otherwise this does not show the bar):
# grep, dd, echo, ls, sed, cut
# ls:
# must output the file size at fifth position.
# The command line interface also uses:
# awk
####>-SCHNIPP-<########################################################
bar_cat()
# Use this shell function in your own install scripts.
# Options:
# Width of the bar (in ten characters). The default is 76 characters.
test -z "${BAR_WIDTH}" && test -n "${COLUMNS}" && BAR_WIDTH=${COLUMNS}
# Check syntax:
( expr "${BAR_WIDTH}" + 0 >/dev/null 2>&1 ) || BAR_WIDTH=0
BAR_WIDTH=`expr ${BAR_WIDTH} + 0` || BAR_WIDTH=0
test "x${BAR_WIDTH}" = x0 && BAR_WIDTH=76
# Maximal block size to use for dd.
test -n "${BAR_BS}" || BAR_BS=1048567
# BEGIN PERC
# Whether to show a percentage.
test -n "${BAR_PERC}" || BAR_PERC=1
# END PERC
# BEGIN ETA
# Whether to show estimated time of arrival (ETA).
test -n "${BAR_ETA}" || BAR_ETA=1
# END ETA
# Width of the trace display:
# BEGIN TRACE
test -n "${BAR_TRACE_WIDTH}" || BAR_TRACE_WIDTH=10
# END TRACE
# The command to execute for every given file. Each file
# is piped into this command individually. By default, the
# files are simply dumped to stdout.
test -n "${BAR_CMD}" || BAR_CMD=cat
# The characters to be used in the bar
test -n "${BAR_L}" || BAR_L='['
test -n "${BAR_R}" || BAR_R=']'
test -n "${BAR_C0}" || BAR_C0='.'
test -n "${BAR_C1}" || BAR_C1='='
# Additional extension to add to each file:
#BAR_EXT=${BAR_EXT-}
# Whether to clear bar after termination. Otherwise keep the full bar.
#BAR_CLEAR=${BAR_CLEAR-0}
# Unless switched off by user, use the bar by default:
test -n "${BAR_OK}" || BAR_OK=1
BAR_WIDTH=`expr ${BAR_WIDTH} - 3`
bar_trace=''
# BEGIN TRACE
if test "x${BAR_TRACE}" = x1
then
BAR_WIDTH=`expr ${BAR_WIDTH} - ${BAR_TRACE_WIDTH}`
bar_lauf=${BAR_TRACE_WIDTH}
bar_t_space=''
bar_t_dot=''
while test "${bar_lauf}" -gt 1
do
bar_t_space="${bar_t_space} "
bar_t_dot="${bar_t_dot}."
bar_lauf=`expr ${bar_lauf} - 1`
done
bar_trace="${bar_t_space} "
fi
# END TRACE
bar_eta=''
BAR_GET_TIME='echo'
# BEGIN ETA
( expr 1 + ${SECONDS} >/dev/null 2>&1 ) || BAR_ETA=0
if test "x${BAR_ETA}" = x1
then
BAR_GET_TIME='( echo ${SECONDS} )'
BAR_WIDTH=`expr ${BAR_WIDTH} - 6`
bar_eta='--:-- '
fi
# END ETA
bar_perc=''
# BEGIN PERC
if test "x${BAR_PERC}" = x1
then
BAR_WIDTH=`expr ${BAR_WIDTH} - 5`
bar_perc=' 0% '
fi
# END PERC
BAR_GET_SIZE='( ls -l "${BAR_DIR}${bar_file}${BAR_EXT}" | sed "s@ *@ @g" | cut -d " " -f 5 ) 2>/dev/null'
# portable?
# check features:
( ( echo a ) >/dev/null 2>&1 ) || BAR_OK=0
( ( echo a | dd bs=2 count=2 ) >/dev/null 2>&1 ) || BAR_OK=0
( ( echo a | grep a ) >/dev/null 2>&1 ) || BAR_OK=0
( ( echo a | sed 's@ *@ @g' ) >/dev/null 2>&1 ) || BAR_OK=0
( ( echo a | cut -d ' ' -f 1 ) >/dev/null 2>&1 ) || BAR_OK=0
# check ranges:
test "${BAR_WIDTH}" -ge 4 || BAR_OK=0
BAR_ECHO='echo'
BAR_E_C1=''
BAR_E_C2=''
BAR_E_NL='echo'
# Does echo accept -n without signalling an error?
if echo -n abc >/dev/null 2>&1
then
BAR_E_C1='-n'
fi
# Check how to print a line without newline:
if ( ( ${BAR_ECHO} "${BAR_E_C1}" abc ; echo 1,2,3 ) | grep n ) >/dev/null 2>&1
then
# Try echo \c:
if ( ( ${BAR_ECHO} 'xyz\c' ; echo 1,2,3 ) | grep c ) >/dev/null 2>&1
then
# Try printf:
if ( ( printf 'ab%s' c ; echo 1,2,3 ) | grep abc ) >/dev/null 2>&1
then
BAR_ECHO='printf'
BAR_E_C1='%s'
else
BAR_ECHO=':'
BAR_E_C1=''
BAR_E_NL=':'
BAR_OK=0
fi
else
BAR_E_C1=''
BAR_E_C2='\c'
fi
fi
# prepare initial bar:
bar_shown=0
if test "${BAR_OK}" = 1
then
bar_lauf=0
bar_graph=''
while test `expr ${bar_lauf} + 5` -le "${BAR_WIDTH}"
do
bar_graph="${bar_graph}${BAR_C0}${BAR_C0}${BAR_C0}${BAR_C0}${BAR_C0}"
bar_lauf=`expr ${bar_lauf} + 5`
done
while test "${bar_lauf}" -lt "${BAR_WIDTH}"
do
bar_graph="${bar_graph}${BAR_C0}"
bar_lauf=`expr ${bar_lauf} + 1`
done
${BAR_E_C2}" 1>&2_eta}${bar_perc}${BAR_L}${bar_graph}${BAR_R}
bar_shown=1
fi
# for shifting large numbers so that expr can handle them:
# Assume we can compute up to 2147483647, thus 9 arbitrary digits.
# We must be able to do + of two numbers of 9 digits length. Ok.
# BEGIN LARGE
( ( test 1999999998 = `expr 999999999 + 999999999` ) >/dev/null 2>&1 ) || BAR_OK=0
bar_large_num="........."
bar_div=""
# END LARGE
bar_numsuff=""
# find size:
bar_size=0
if test -n "${BAR_SIZE}"
then
bar_size=${BAR_SIZE}
# BEGIN LARGE
while expr "${bar_size}" : "${bar_large_num}" >/dev/null 2>&1
do
bar_div="${bar_div}."
bar_numsuff="${bar_numsuff}0"
bar_size=`expr "${bar_size}" : '$.*$.$'`
done
# END LARGE
BAR_GET_SIZE="echo '${BAR_SIZE}'"
else
for bar_file
do
bar_size1=0
if test -f "${BAR_DIR}${bar_file}${BAR_EXT}"
then
bar_size1=`eval "${BAR_GET_SIZE}"`
# BEGIN LARGE
# divide and upround by pattern matching:
if test -n "${bar_div}"
then
bar_size1=`expr "${bar_size1}" : '$.*$'${bar_div}'$'` || bar_size1=0
fi
# adjust if still too large:
while expr "${bar_size1}" : "${bar_large_num}" >/dev/null 2>&1
do
bar_div="${bar_div}."
bar_numsuff="${bar_numsuff}0"
bar_size1=`expr "${bar_size1}" : '$.*$.$'`
bar_size=`expr "${bar_size}" : '$.*$.$'` || bar_size=0
done
# upround if necessary:
if test -n "${bar_div}"
then
bar_size1=`expr "${bar_size1}" + 1`
fi
# END LARGE
# add to total size:
bar_size=`expr ${bar_size} + ${bar_size1}`
# BEGIN LARGE
# adjust if still too large:
while expr "${bar_size}" : "${bar_large_num}" >/dev/null 2>&1
do
bar_div="${bar_div}."
bar_numsuff="${bar_numsuff}0"
bar_size=`expr "${bar_size}" : '$.*$.$'`
done
# END LARGE
else
BAR_OK=0
fi
done
fi
bar_quad=`expr ${BAR_WIDTH} '*' ${BAR_WIDTH}`
test "${bar_size}" -gt "${bar_quad}" || BAR_OK=0
if test "${BAR_OK}" = 0
then
# For some reason, we cannot display the bar. Thus plain operation:
for bar_file
do
if test "${bar_file}" = "/dev/stdin"
then
eval "${BAR_CMD}"
else
eval "${BAR_CMD}" < "${BAR_DIR}${bar_file}${BAR_EXT}"
fi
done
else
# Compute wanted bytes per step:
bar_want_bps=`expr ${bar_size} + ${BAR_WIDTH}`
bar_want_bps=`expr ${bar_want_bps} - 1`
bar_want_bps=`expr ${bar_want_bps} / ${BAR_WIDTH}`
# Compute block count per step to keep within maximum block size:
bar_count=1
if test "${bar_want_bps}" -gt "${BAR_BS}"
then
bar_count=`expr ${bar_want_bps} + ${BAR_BS}`
bar_count=`expr ${bar_count} - 1`
bar_count=`expr ${bar_count} / ${BAR_BS}`
fi
# Compute block size for given count:
bar_wc=`expr ${BAR_WIDTH} '*' ${bar_count}`
bar_bs=`expr ${bar_size} + ${bar_wc}`
bar_bs=`expr ${bar_bs} - 1`
bar_bs=`expr ${bar_bs} / ${bar_wc}`
# Compute bs * count, the bytes per step:
bar_bps=`expr ${bar_bs} '*' ${bar_count}`
# Compute bytes per hundredth:
bar_bph=`expr ${bar_size} + 99`
bar_bph=`expr ${bar_bph} / 100`
# Run loop:
bar_pos=0
bar_graph="${BAR_L}"
bar_cur_char=0
bar_t0=`eval "${BAR_GET_TIME}" 2>/dev/null` || bar_t0=0
for bar_file
do
# BEGIN TRACE
if test "x${BAR_TRACE}" = x1
then
bar_trace=`expr "${bar_file}" : '.*/$[^/][^/]*$$'` || bar_trace="${bar_file}"
bar_trace=`expr "${bar_trace}${bar_t_space}" : '$'${bar_t_dot}'$'`
bar_trace="${bar_trace} "
fi
# END TRACE
# Initial character position in bar for file:
bar_char=`expr ${bar_pos} / ${bar_want_bps}` || bar_char=0
while test "${bar_char}" -gt `expr ${bar_cur_char} + 4`
do
bar_graph="${bar_graph}${BAR_C1}${BAR_C1}${BAR_C1}${BAR_C1}${BAR_C1}"
bar_cur_char=`expr ${bar_cur_char} + 5`
done
while test "${bar_char}" -gt "${bar_cur_char}"
do
bar_graph="${bar_graph}${BAR_C1}"
bar_cur_char=`expr ${bar_cur_char} + 1`
done
# Get file size. This must work now (we checked with test -f before).
bar_size1=`eval "${BAR_GET_SIZE}" 2>/dev/null` || bar_size1=0
# BEGIN LARGE
# Divide and upround by pattern matching:
if test -n "${bar_div}"
then
bar_size1=`expr "${bar_size1}" : '$.*$'${bar_div}'$'` || bar_size1=0
bar_size1=`expr "${bar_size1}" + 1`
fi
# END LARGE
# loop:
bar_total=0
exec 6>&1
exec 5<"${BAR_DIR}${bar_file}${BAR_EXT}"
while test "${bar_total}" -lt "${bar_size1}"
do
dd bs="${bar_bs}" count="${bar_count}${bar_numsuff}" <&5 >&6 2>/dev/null
bar_total=`expr ${bar_total} + ${bar_bps}`
if test "${bar_total}" -gt "${bar_size1}"
then
bar_total="${bar_size1}"
fi
bar_pos1=`expr ${bar_pos} + ${bar_total}`
bar_proz=`expr ${bar_pos1} / ${bar_bph}` || bar_proz=0
# BEGIN PERC
if test "x${BAR_PERC}" = x1
then
bar_perc=" ${bar_proz}% "
bar_perc=`expr "${bar_perc}" : '.*$.....$$'`
fi
# END PERC
# BEGIN ETA
if test "x${BAR_ETA}" = x1
then
bar_diff=`eval "${BAR_GET_TIME}" 2>/dev/null` || bar_diff=0
bar_diff=`expr ${bar_diff} - ${bar_t0} 2>/dev/null` || bar_diff=0
bar_100p=`expr 100 - ${bar_proz}` || bar_100p=0
bar_diff=`expr ${bar_diff} '*' ${bar_100p}` || bar_diff=0
bar_diff=`expr ${bar_diff} + ${bar_proz}` || bar_diff=0
bar_diff=`expr ${bar_diff} - 1` || bar_diff=0
bar_diff=`expr ${bar_diff} / ${bar_proz} 2>/dev/null` || bar_diff=0
if test "${bar_diff}" -gt 0
then
bar_t_unit=":"
if test "${bar_diff}" -gt 2700
then
bar_t_uni="h"
bar_diff=`expr ${bar_diff} / 60`
fi
bar_diff_h=`expr ${bar_diff} / 60` || bar_diff_h=0
if test "${bar_diff_h}" -gt 99
then
bar_eta=" ${bar_diff_h}${bar_t_unit} "
else
bar_diff_hi=`expr ${bar_diff_h} '*' 60` || bar_diff_hi=0
bar_diff=`expr ${bar_diff} - ${bar_diff_hi}` || bar_diff=0
bar_diff=`expr "00${bar_diff}" : '.*$..$$'`
bar_eta=" ${bar_diff_h}${bar_t_unit}${bar_diff} "
fi
bar_eta=`expr "${bar_eta}" : '.*$......$$'`
fi
fi
# END ETA
bar_char=`expr ${bar_pos1} / ${bar_want_bps}` || bar_char=0
while test "${bar_char}" -gt "${bar_cur_char}"
do
bar_graph="${bar_graph}${BAR_C1}"
${bar_trace}${bar_eta}${bar_perc}${bar_graph}${BAR_E_C2}" 1>&2
bar_cur_char=`expr ${bar_cur_char} + 1`
done
done
) | eval "${BAR_CMD}"
bar_pos=`expr ${bar_pos} + ${bar_size1}`
done
# ${BAR_ECHO} "${BAR_E_C1}" "${BAR_R}${BAR_E_C2}" 1>&2
fi
if test "${bar_shown}" = 1
then
# BEGIN TRACE
test "x${BAR_TRACE}" = x1 && bar_trace="${bar_t_space} "
# END TRACE
# BEGIN ETA
test "x${BAR_ETA}" = x1 && bar_eta=' '
# END ETA
if test "x${BAR_CLEAR}" = x1
then
# BEGIN PERC
test "x${BAR_PERC}" = x1 && bar_perc=' '
# END PERC
bar_lauf=0
bar_graph=''
while test `expr ${bar_lauf} + 5` -le "${BAR_WIDTH}"
do
bar_graph="${bar_graph} "
bar_lauf=`expr ${bar_lauf} + 5`
done
while test "${bar_lauf}" -lt "${BAR_WIDTH}"
do
bar_graph="${bar_graph} "
bar_lauf=`expr ${bar_lauf} + 1`
done
${BAR_E_C2}" 1>&2_eta}${bar_perc} ${bar_graph}
else
# BEGIN PERC
test "x${BAR_PERC}" = x1 && bar_perc='100% '
# END PERC
bar_lauf=0
bar_graph=''
while test `expr ${bar_lauf} + 5` -le "${BAR_WIDTH}"
do
bar_graph="${bar_graph}${BAR_C1}${BAR_C1}${BAR_C1}${BAR_C1}${BAR_C1}"
bar_lauf=`expr ${bar_lauf} + 5`
done
while test "${bar_lauf}" -lt "${BAR_WIDTH}"
do
bar_graph="${bar_graph}${BAR_C1}"
bar_lauf=`expr ${bar_lauf} + 1`
done
${bar_trace}${bar_eta}${bar_perc}${BAR_L}${bar_graph}${BAR_R}${BAR_E_C2}" 1>&2
${BAR_E_NL} 1>&2
fi
fi
####>-SCHNAPP-<########################################################
BAR_AWK_0=''
# Command line interface:
while test -n "$1"
do
case "$1" in
-o|-c|-w|-0|-1|-e|-d|-b|-s|-\[\]|-\[|-\]|-T)
if test -z "$2"
then
echo "$0: Error: A non-empty argument was expected after $1" 1>&2
fi
BAR_ARG="$1"
BAR_OPT="$2"
shift
shift
-o*|-c*|-w*|-0*|-1*|-e*|-d*|-b*|-T*)
BAR_ARG=`expr "$1" : '$-.$'`
BAR_OPT=`expr "$1" : '-.$.*$$'`
shift
-h|-n|-p|-D|-D-|-q|-V|-t|-E|-L)
BAR_ARG="$1"
BAR_OPT=""
shift
--) shift
break
-*) echo "$0: Error: Unrecognized option: $1" 1>&2
exit 1
break
esac
case "${BAR_ARG}" in
-h) echo 'Usage: bar [-n] [-p] [-q] [-o FILE] [-c CMD] [-s SIZE] [-b SIZE]'
echo ' [-w WIDTH] [-0/1/[/] CHAR] [-d DIR] [-e EXT] [Files]'
echo ' bar -V'
echo ' bar -D'
echo ' bar -D-'
echo 'Options:'
echo ' -h displays help'
echo ' -o FILE sets output file'
echo ' -c CMD sets individual execution command'
echo ' -e EXT append an extension to each file'
echo ' -d DIR prepend this prefix to each file (a directory must end in /)'
echo ' -s SIZE expected number of bytes. Use for pipes. This is a hint'
echo ' only that must be greater or equal to the amount actually'
echo ' processed. Further, this only works for single files.'
echo ' -b SIZE maximal block size (bytes) (default: 1048567)'
echo ' -w WIDTH width in characters (default: terminal width-3 or 76)'
echo ' -0 CHAR character for empty bar (default: .)'
echo ' -1 CHAR character for full bar (default: =)'
echo ' -[ CHAR first character of bar (default: [)'
echo ' -] CHAR last character of bar (default: ])'
echo ' -n clears bar after termination'
echo ' -t traces (=displays) which file is processed'
echo ' -T WIDTH no of characters reserved for the file display of -t'
echo ' -p hides percentage'
echo ' -E hides estimated time display'
echo ' -q hides the whole bar, be quiet'
echo ' -D tries to dump the bar_cat() shell function, then exit.'
echo ' Here, -t, -p, -E remove the corresponding feature completely.'
echo ' Further, -L removes large file support from the code.'
echo ' -D- same as -D, but dumps the function body only'
echo ' -V displays version number'
echo ' -- end of options: only file names follow'
exit 0
-n) BAR_CLEAR=1
-L) BAR_LARGE=0
BAR_AWK_0="${BAR_AWK_0} /END *LARGE/ {x=1} ;"
BAR_AWK_0="${BAR_AWK_0} /BEGIN *LARGE/ {x=0} ;"
-t) BAR_TRACE=1
BAR_AWK_0="${BAR_AWK_0} /END *TRACE/ {x=1} ;"
BAR_AWK_0="${BAR_AWK_0} /BEGIN *TRACE/ {x=0} ;"
-T) BAR_TRACE_WIDTH="${BAR_OPT}"
-q) BAR_OK=0
-p) BAR_PERC=0
BAR_AWK_0="${BAR_AWK_0} /END *PERC/ {x=1} ;"
BAR_AWK_0="${BAR_AWK_0} /BEGIN *PERC/ {x=0} ;"
-E) BAR_ETA=0
BAR_AWK_0="${BAR_AWK_0} /END *ETA/ {x=1} ;"
BAR_AWK_0="${BAR_AWK_0} /BEGIN *ETA/ {x=0} ;"
-V) echo "bar v${BAR_VERSION}"
exit 0
-D) echo "BAR_VERSION=${BAR_VERSION}"
awk "${BAR_AWK_0}"'{sub(/ *#.*$/,"")} ; /^bar_cat/ {x=1} ; {sub(/^ */,"")} ; /./ {if(x)print} ; /^}/ {x=0}' "$0"
exit 0
-D-) echo "BAR_VERSION=${BAR_VERSION}"
awk "${BAR_AWK_0}"'{sub(/ *#.*$/,"")} ; /^}/ {x=0} ; {sub(/^ */,"")} ; /./ {if(x)print} ; /^{/ {x=1}' "$0"
exit 0
-o) exec 1>"${BAR_OPT}"
-c) BAR_CMD="${BAR_OPT}"
-b) BAR_BS="${BAR_OPT}"
if BAR_RAW=`expr "${BAR_BS}" : '$.*$k$'`
then
BAR_BS=`expr ${BAR_RAW} '*' 1024`
elif BAR_RAW=`expr "${BAR_BS}" : '$.*$M$'`
then
BAR_BS=`expr ${BAR_RAW} '*' 1048567`
fi
-s) BAR_SIZE="${BAR_OPT}"
if BAR_RAW=`expr "${BAR_SIZE}" : '$.*$k$'`
then
BAR_SIZE=`expr ${BAR_RAW} '*' 1024`
elif BAR_RAW=`expr "${BAR_SIZE}" : '$.*$M$'`
then
BAR_SIZE=`expr ${BAR_RAW} '*' 1048567`
fi
if test "$#" -gt 1
then
echo "Error: -s cannot be specified for multiple input files." 1>&2
exit 1
fi
-e) BAR_EXT="${BAR_OPT}"
-d) BAR_DIR="${BAR_OPT}"
-0) BAR_C0="${BAR_OPT}"
-1) BAR_C1="${BAR_OPT}"
-\[) BAR_L="${BAR_OPT}"
-\]) BAR_R="${BAR_OPT}"
BAR_L="${BAR_OPT}"
BAR_R="${BAR_OPT}"
-w) BAR_WIDTH="${BAR_OPT}"
esac
done
# Invoke main function:
if test "$#" = 0
then
bar_cat /dev/stdin
else
bar_cat "$@"
fi
EDIT: solved https://bbs.archlinux.org/viewtopic.php … 85#p498885
It seems like I have not tried every potential packages after all
Last edited by tamikana (2011-10-30 16:04:46)

This might help http://www.dwcourse.com/dreamweaver/ten-commandments-spry-menubars.php#one
Also, if you use DW CS5 click on Live Code and Live View. Then when clicking on the menu items in Live View, watch the changes in classes that occur. This mifgt give you a clue of what to do.
Cheers,
Gramps

Progress bar Fl cs3 as3.0

below is my very simple code to load images from a instance
of button component into an instance of UIloader component.
there are multiple buttons like this one
i can't get it... the way to get progress bar to listen and
respond to the loading of the image
img_02_btn.addEventListener(MouseEvent.CLICK, onClick2);
function onClick2(event:MouseEvent):void
trace("typeMe");
loaderOne.source = "assets/b300.png";
loaderOne.load();
}

Thanks Jongware I knew it had to be something simple.
Working version:
    var myStop =6;
    var myWindow = new Window ( 'window','Progress');
    var myProgressBar = myWindow.add ('progressbar', [12, 12, 350, 24], 0, myStop);
    var myStaticText = myWindow.add('statictext');
    myStaticText.bounds = [0, 0, 340, 20];
    myStaticText.alignment = "left";
function stagesLeft(myText,stageVal){
    if(stageVal == 1){
        myWindow.show();
        myProgressBar.value = stageVal;
        myStaticText.text = myText;
        myWindow.text = 'Stage '+ stageVal + ' out of ' + myStop;
        if(stageVal == 6){
        myWindow.close();
To use the function:
stagesLeft("This is the first stage",1)
then further on in the script when another process is taking place
stagesLeft("Here is stage 2 of this script",2)
etc etc.
Cheers, John.

How to determine a sql query size to display a progress bar

I would like to show a progress of an sql query within a jsp page.
Background:
I have a reporting web application, where over 500 contacts can run reports based on different criteria such as date range....
I current display a message stating 'executng query please wait', however the users (hate users) do not seem to wait, thereofore they decide to run the query all over again which affected my reportign sever query size (eventually this crashes, stopping all reports)
Problem:
The progress bar is not a problem, how would I determine the size of the query at runtime therefore adding the time onto my progress bar.

Yes it's doable (we do it) but it sure ain't easy.
We've got about 23,500,000 features (and counting) in a geodata database. Precise spatial selection algorithms are expensive. Really expensive.
We cannot impose arbitrary limits on search criteria. If the client requires the whole database we are contractually obligated to provide it...
For online searches We use statistics to approximate the number of features which a given query is likely to return... more or less the same way that the query optimiser behind any half decent (not mysql (5 alteast)) database management system does.
We have a batch job which records how many features are linked to each distinct value of each search criteria... we just do the calculations (presuming a normal (flat) distribution) and...
... if the answer is more than a 100,000 we inform the user that the request must be "batched", and give them a form to fill out confirming there contact details. We run the extract overnight and send the user an email containing a link which allows them to download the result the next morning.
... if the answer is more than a million features we inform the user that the request must batched over the weekend... same deal as above, except we do it over the weekend to (a) discourage this; and (b) the official version ensure we have enough time to run the extract without impinging upon the maintenance window.
... if the answer is more than 5 million we display our brilliant "subscribe to our DVD service to get the latest version of the whole shebang every three months (or so), so you can kill your own blooody server with these ridiculous searches" form.
Edited by: corlettk on Dec 5, 2007 11:12 AM

Progress Bar is not working in Labview 6i

Hi all,
i implemented one vi with Progress bar using labiview 6i. i created property node for the progress bar to set the range as 550 using scale >Range>maximum. progress bar is updating well until the value of 220. later the progress bar is starting from begining. What is the maximum range we can define for the Progress bar.? please see the attached picture . Am i missing anything from the figure?
thanks,
kalpana
Attachments:
Progress Bar.png ‏60 KB

Hi kalpu,
as your "slide" is of datatype U8 it will not display values greater than 255…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

CS3 JS progress bar function

I'm trying to create a progress bar function but the code below creates 6 instances of the progress window rather than updating the info in the first window. I've gone the for loop process to make progress bars work is this the only way it can be used or is there a way to tell if a window is open on if so update the bar and info of that window?
to call the bar I use stagesLeft("Looking for duplicates",1)
function stagesLeft(myText,stageVal){
    var myStop =6;
    var myPbValue = stageVal;
    var myWindow = new Window ( 'window',' Progress');
    var myProgressBar = myWindow.add ('progressbar', [12, 12, 350, 24], 0, myStop);
    var myStaticText = myWindow.add('statictext');
    myStaticText.bounds = [0, 0, 340, 20];
    myStaticText.alignment = "left";
        myWindow.show();
        myProgressBar.value = myPbValue;
        myStaticText.text = myText;
        myWindow.text = 'Stage '+ myPbValue + ' out of ' + myStop;
        if(myPbValue == 6){
        myWindow.close();

Thanks Jongware I knew it had to be something simple.
Working version:
    var myStop =6;
    var myWindow = new Window ( 'window','Progress');
    var myProgressBar = myWindow.add ('progressbar', [12, 12, 350, 24], 0, myStop);
    var myStaticText = myWindow.add('statictext');
    myStaticText.bounds = [0, 0, 340, 20];
    myStaticText.alignment = "left";
function stagesLeft(myText,stageVal){
    if(stageVal == 1){
        myWindow.show();
        myProgressBar.value = stageVal;
        myStaticText.text = myText;
        myWindow.text = 'Stage '+ stageVal + ' out of ' + myStop;
        if(stageVal == 6){
        myWindow.close();
To use the function:
stagesLeft("This is the first stage",1)
then further on in the script when another process is taking place
stagesLeft("Here is stage 2 of this script",2)
etc etc.
Cheers, John.

Progress bar in a JProgressBar component is not always drawn

Hi experts,
I have a strange issue with a swing application. This app contains of a JFrame including a JTable. This table has multiple columns, one of them is a JProgressBar (implementing a TableCellRenderer). Multiple background threads are running, every of them updates one row's progress bar via the InvokeLater() method. This works fine.
At a specific point within the runtime of the application, the value of a progress bar is set back to 0, and instead of the default percentage text a custom string is displayed (then continuing to progress with this custom text set). This works fine as well.
Problem is, that when a custom string is set to one progress bar as described above, then the bars of the other JProgressBars are not painted any more. But the default percentage text of these other JProgressBars are still incremented and painted correctly. When the one progress bar, that has the custom string set, has finished and this row is removed from table, then the other progress bars are again painted correctly (including the default percentage text).
A part of the custom TableCellRenderer class is shown here:
     public class ProgressRenderer extends JProgressBar implements TableCellRenderer
     public ProgressRenderer()
          super(SwingConstants.HORIZONTAL);
          setBorderPainted(false);
          setStringPainted(true);
     public Component getTableCellRendererComponent(JTable table, Object value,
          boolean isSelected, boolean hasFocus, int row, int column)
          if(value != null)
               setValue(((JProgressBar) value).getValue());
               setString(((JProgressBar) value).getString());
               setMinimum(((JProgressBar) value).getMinimum());
               setMaximum(((JProgressBar) value).getMaximum());
          return this;
...Any ideas what could be wrong here?
I am really out of ideas here :(
Thanks in advance for your help!
Kind regards, Matthias

I have solved the problem:
     public Component getTableCellRendererComponent(JTable table, Object value,
          boolean isSelected, boolean hasFocus, int row, int column)
          if(value != null)
               setString(((JProgressBar) value).getString());
               setMinimum(((JProgressBar) value).getMinimum());
               setMaximum(((JProgressBar) value).getMaximum());
               setValue(((JProgressBar) value).getValue());
          return this;
     }

Folio Builder Panel - progress bars?

Not a major thing, I know, but still...
What happened to the upload progress bars in the Folio Builder Panel? I do like being able to monitor progress.

OK, I might be mistaken - the bars are there when updating an article, or when adding a single article to an existing folio. With multi-article import, there were no bars. Didn't we get to see loading bars when importing multiple articles? Or is old age setting in?

Multiple bounded ranges in a progress bar

Similar Messages

Maybe you are looking for