Multiple Broadcasts using Airport Express

Can I use more than one Airport Express to play a single Itune source in several rooms each equipped with a its own Airport Express. If so up to how many rooms and how do I set up network.

Is these any chance? Possibly, but also possibly not with the current Airport Express design. The problem with streaming to multiple Airport Express devices would be in keeping the sound output from all of them in sync - a bigger technical challenge than you might first imagine.
Only Apple and is product developers know the real answer to this question - but since Apple never pre-announces upcoming hardware or software products, we won't know until the day an official announcement from Apple is made.

Similar Messages

  • How to connect to multiple speakers using Airport Express

    Hi -- I have two AP Express modules setup and working in my household. I have no problems using either from my iBook G4.
    How do I use them both at the same time? I cannot find an appropriate way to set this up?

    Welcome to Apple Discussions
    Since you are at 10.4.7, I'm assuming iTunes is at least 6.0.2. If not, upgrade the app via Software Update or Apple's iTunes site to the latest v 6.0.5.
    Since both units work individually, I'd say the problem lies in how the 2 units are configured. Are you using the latest 6.3 firmware for Airport express? To determine your version, download the firmware, select install. The ensuing panel will tell you the latest version for your units. Upgrade if you are using an earlier version of the firmware.
    Post back with results.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.7)   LaCie 160gb d2 HD Canon i960 printer

  • Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

    Hi I was wondering :
    Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • HT4587 what about set up apple tv using airport express base without WIFI connection

    How to set up Apple tv on my tv using airport express base without internet connection

    In theory you can configure the AirPort Express to broadcast a Wi-Fi network that the Apple TV can connect to. The default configuration of the Express is to broadcast an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN. You would then configure the Apple TV to connect to this network.

  • How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?
    Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
    You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
    If the hotel only provides wireless service, then a single AirPort Express will not help you.
    However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How to set up time capsule with existing network that uses airport express/extreme

    I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

    I suggest to use your airport express to extend your wireless network that is created by your new time capsule

  • How do I use airport express to extend my wireless network?

    How vcan I extend the range of my wireless network using Airport Express?

    It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
    The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
    name of the wireless network
    the correct wireless security settings
    and correct password.
    "Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
    But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
    Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
    This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
    Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
    The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc.  Extremely limited.
    Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
    Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
    If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
    Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet.  What exactly would that achieve?
    That is a completely different subject since this discussion is about extending a wireless network using wireless only.

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

  • Why cant i print from my ipad using airport express but i can print from my mac using the express

    why cant i print from my ipad using airport express but i can print from my mac using the express

    Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

  • After I started using Airport Express, my HP LaserJet 5000 won't print. I get the message "Network host '192.168.0.4' is busy." How do I fix this?

    After I started using Airport Express, I get the message " host '192.168.0.4' is busy" andmy HP [ethernet] printer no longer works.

    OK, I found this thread which answered my question.
    http://discussions.apple.com/thread.jspa?messageID=610763&#610763

  • I want to use Airport Express in my hotel room using the wired internet connection, but I don't carry a computer, just my iPad.  Is that possible?

    I want to use AirPort Express when I am traveling.  I would like to use a wired internet connection in a hotel room to create a wireless connection.  However, I do not normally carry my laptop, just my iPad.  Is it possible to do this?

    You will have to pre-configure the Express using AirPort Utility on your computer before you leave on the trip. The Express will store and remember the settings.
    You might want to check with the hotel in advance to make sure that they have Ethernet ports available. Most hotels have switched to wireless and the others are not far behind.

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

Maybe you are looking for

  • Two APEXs on one Instance

    We have a requirement to be able to have two copies of APEX running on the same Oracle instance, one available inside the firewall and the other outside the firewall. Each version would be running different applications, public and private, but shari

  • GR based IV" then in MIRO the Cenvat clearing A/c is not getting picked up

    If we have creating a PO without checking "GR based IV" then in MIRO the Cenvat clearing A/c is not getting picked up, due to this we are not able to create MIRO document with Excise duty value. We are using Tax calculation procedure TAXINN. Regards,

  • Level 0 Security Filter

    So I'd like to create a security filter preventing write access across all dimensions at upper levels. In other words, I only want users to be able to lock and send at the zero level. Can I use multiple @LevMbrs() functions in a single row to do this

  • Error in show space script.

    Hi Gurus, When ever I the below query as SYS user it is retrieving the rows without any issues. select SEGMENT_NAME, FREE_BLOCKS,TOTAL_BLOCKS,UNUSED_BLOCKS from table( show_space_for( '%',user,'%' ) ) but If change the user name(below is changed scri

  • Standby instance throwing error

    when trying to startup standby instance , i am getting error : SQL> startup pfile='/home/oracle/dummy/admin/pfile/initdummy.ora' nomount; ORA-16025: parameter LOG_ARCHIVE_DEST_2 contains repeated or conflicting attributes SQL> db_name=org compatible=